2023-08-26 18:50:36 +02:00
<?xml version="1.0" encoding="UTF-8"?>
<gs_provision version= "1" >
<config version= "2" >
<!-- Configuration Template for GHP6xx Firmware Version 1.0.1.49 -->
<!-- Instruction -->
<!-- The new type of config template gives better understanding than P - value numbers to match the setting name from web UI or device, by using names that are similar from web UI. -->
<!-- 1. This config template includes settings for account 1 only. To update item name to "account.i...", where i is the account index. For example, to update Account 12 SIP server address, include the following in config template: -->
<!-- Example, <item name="account.2.sip.server.1.address">sipserver.net</item> -->
<!-- 2. The template uses alias name to represent drop - down options. For example, Tel URI uses "Disabled, UserIsPhone, Enabled". To update this setting to "User=Phone", include the following in config template: -->
<!-- Example, <item name="account.1.sip.telUri">UserIsPhone</item> -->
<!-- 3. For those settings without alias, numbers are informed to match drop - down options. -->
<!-- End of Instruction -->
<!-- Update since -->
<!-- Known issue / Notes: -->
<!-- ############################################################################## -->
<!-- ## Account 1/ General Settings -->
<!-- ############################################################################## -->
{for $line=1 to 2}
{$row=$lines.$line}
<!-- Account Active -->
<!-- Yes, No -->
<item name= "account.{$line}.enable" > {if filter_var($row.enabled, FILTER_VALIDATE_BOOLEAN)}Yes{else}No{/if}</item>
<!-- Account Name -->
<item name= "account.{$line}.name" > {$row.display_name}</item>
<!-- SIP Server -->
{if $row.sip_transport != 'dns srv'}
<item name= "account.{$line}.sip.server.1.address" > {$row.server_address}:{$row.sip_port}</item>
{else}
<item name= "account.{$line}.sip.server.1.address" > {$row.server_address}</item>
{/if}
<!-- Secondary SIP Server -->
{if $row.sip_transport != 'dns srv' & & isset($row.server_address_secondary)}
<item name= "account.{$line}.sip.server.2.address" > {$row.secondary_server_address}:{$row.sip_port}</item>
{else}
<item name= "account.{$line}.sip.server.2.address" > {$row.secondary_server_address}</item>
{/if}
<!-- Outbound Proxy -->
{if $row.sip_transport != 'dns srv'}
<item name= "account.{$line}.sip.outboundProxy.1.address" > {if isset($row.outbound_proxy_primary)}{$row.outbound_proxy_primary}:{$row.sip_port}{/if}</item>
{else}
<item name= "account.{$line}.sip.outboundProxy.1.address" > {if isset($row.outbound_proxy_primary)}{$row.outbound_proxy_primary}{/if}</item>
{/if}
<!-- Secondary Outbound Proxy -->
{if $row.sip_transport != 'dns srv'}
<item name= "account.{$line}.sip.outboundProxy.2.address" > {if isset($row.outbound_proxy_secondary)}{$row.outbound_proxy_secondary}:{$row.sip_port}{/if}</item>
{else}
<item name= "account.{$line}.sip.outboundProxy.2.address" > {if isset($row.outbound_proxy_secondary)}{$row.outbound_proxy_secondary}{/if}</item>
{/if}
<!-- SIP User ID -->
<item name= "account.{$line}.sip.userid" > {$row.user_id}</item>
<!-- SIP Authentication ID -->
<item name= "account.{$line}.sip.subscriber.userid" > {$row.auth_id}</item>
<!-- SIP Authentication Password -->
<item name= "account.{$line}.sip.subscriber.password" > {$row.password}</item>
<!-- Name -->
<item name= "account.{$line}.sip.subscriber.name" > {$row.display_name}</item>
<!-- Tel URI -->
<!-- Disabled, UserIsPhone, Enabled -->
<item name= "account.{$line}.sip.telUri" > Disabled</item>
<!-- Voice Mail Access Number -->
<item name= "account.{$line}.sip.voicemail.number" > {$voicemail_number}</item>
<!-- Account 1 Network Settings -->
<!-- DNS Mode -->
<!-- ARecord, SRV, NaptrOrSrv, UseConfiguredIP -->
{$dnsmode='ARecord'}
{if isset($grandstream_dns_mode)}
{if $grandstream_dns_mode == 0}{$dnsmode='ARecord'}{/if}
{if $grandstream_dns_mode == 1}{$dnsmode='SRV'}{/if}
{if $grandstream_dns_mode == 2}{$dnsmode='NaptrOrSrv'}{/if}
{if $grandstream_dns_mode == 3}{$dnsmode='UseConfiguredIP'}{/if}
{/if}
<item name= "account.{$line}.network.dnsMode" > {$dnsmode}</item>
<!-- NAT Traversal -->
<!-- No, STUN -->
{if isset($grandstream_nat_traversal) & & $grandstream_nat_traversal == 1}
<item name= "account.{$line}.network.natTraversal" > STUN</item>
{else}
<item name= "account.{$line}.network.natTraversal" > No</item>
{/if}
<!-- Support Rport (RFC 3581) -->
<!-- Yes, No -->
<item name= "account.{$line}.network.supportRport" > Yes</item>
<!-- Proxy - Require -->
<item name= "account.{$line}.network.proxyRequire" > </item>
<!-- Maximum Number of SIP Request Retries -->
<!-- Number: 1 - 10 -->
<item name= "account.{$line}.network.maxNumOfRetries" > 2</item>
<!-- DNS SRV Fail - over Mode -->
<!-- Default, SavedOneUntilDNSTTL, SavedOneUntilNoResponse, SavedWhenFailback -->
<item name= "account.{$line}.network.dnsSRVFailoverMode" > Default</item>
<!-- Failback Expiration (m) -->
<item name= "account.{$line}.network.failbackTimer" > 60</item>
<!-- Register Before DNS SRV Fail - over -->
<!-- Yes, No -->
<item name= "account.{$line}.network.dnsSRVRegisterBeforeFailover" > No</item>
<!-- ############################################################################## -->
<!-- ## Account 1/ SIP Settings -->
<!-- ############################################################################## -->
<!-- Account 1 Basic Settings -->
<!-- SIP Registration -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.registration" > Yes</item>
<!-- Unregister on Reboot -->
<!-- No, Yes, Instance -->
<item name= "account.{$line}.sip.unregisterOnReboot" > Instance</item>
<!-- Register Expiration (m) -->
<!-- Number: 0 - 64800 -->
<item name= "account.{$line}.sip.registerExpiration" > {$row.register_expires}</item>
<!-- SUBSCRIBE Expiration (m) -->
<!-- Number: 0 - 64800 -->
<item name= "account.{$line}.sip.subscribe.expiration" > 60</item>
<!-- Reregister before Expiration (s) -->
<!-- Number: 0 - 64800 -->
<item name= "account.{$line}.sip.registerBeforeExpiration" > 0</item>
<!-- Registration Retry Wait Time (s) -->
<item name= "account.{$line}.sip.registrationFailureRetryWaitTime" > 20</item>
<!-- Add Auth Header On Initial REGISTER -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.header.authOnInitialRegister" > No</item>
<!-- Enable OPTIONS Keep Alive -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.keepAlive.enable" > No</item>
<!-- OPTIONS Keep Alive Interval (s) -->
<item name= "account.{$line}.sip.keepAlive.interval" > 30</item>
<!-- OPTIONS Keep Alive Max Lost -->
<item name= "account.{$line}.sip.keepAlive.maxLost" > 30</item>
<!-- Subscribe for MWI -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.subscribe.forMwi" > {if isset($subscribe_mwi)}Yes{else}No{/if}</item>
<!-- SUBSCRIBE for Registration -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.subscribe.forRegistration" > No</item>
<!-- Use Privacy Header -->
<!-- Default, Yes, No -->
<item name= "account.{$line}.sip.header.privacy" > Default</item>
<!-- Use P - Preferred - Identity Header -->
<!-- Default, Yes, No -->
<item name= "account.{$line}.sip.header.ppi" > Default</item>
<!-- Use X - Grandstream - PBX Header -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.header.xGrandstream" > Yes</item>
<!-- Use P - Access - Network - Info Header -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.header.pani" > Yes</item>
<!-- Use P - Emergency - Info Header -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.header.pei" > Yes</item>
<!-- Use MAC Header -->
<!-- No - No, Yes for REGISTER only - Register Only, Yes to all SIP - Yes To All Sip -->
<item name= "account.{$line}.sip.header.macHeader" > Register Only</item>
<!-- Add MAC in User - Agent -->
<!-- No - No, Yes for all except REGISTER - Yes Except Register, Yes to all Sip - Yes To All Sip -->
<item name= "account.{$line}.sip.header.mac" > Yes To All Sip</item>
<!-- SIP Transport -->
<!-- UDP, TCP, Tls Or Tcp -->
{$tp='UDP'}
{if $row.sip_transport == 'udp'}{$tp='UDP'}{/if}
{if $row.sip_transport == 'tcp'}{$tp='TCP'}{/if}
{if $row.sip_transport == 'tls'}{$tp='Tls Or Tcp'}{/if}
{if $row.sip_transport == 'dns srv'}
{if isset($grandstream_dnssrv_transport)}
{if $grandstream_dnssrv_transport == 'udp'}{$tp='UDP'}
{elseif $grandstream_dnssrv_transport == 'tls'}{$tp='Tls Or Tcp'}
{else}{$tp='TCP'}
{/if}
{else}{$tp='TCP'}
{/if}
{/if}
<item name= "account.{$line}.sip.transport" > $tp</item>
<!-- Enable TCP Keep - alive -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.enableTCPKeepalive" > Yes</item>
<!-- SIP Listening Mode -->
<!-- Transport_Only, Dual, Dual_BLF_Enforced, Dual_Secured -->
<item name= "account.{$line}.sip.listeningMode" > Transport_Only</item>
<!-- Local SIP Port -->
<item name= "account.{$line}.sip.localPort" > 5060</item>
<!-- SIP URI Scheme When Using TLS -->
<!-- sip, sips -->
<item name= "account.{$line}.sip.uriSchemeWhenUsingTls" > sips</item>
<!-- Use Actual Ephemeral Port in Contact with TCP/TLS -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.useActualEphemeralPortInContactWithTcpTls" > No</item>
<!-- Support SIP Instance ID -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.supportInstanceId" > Yes</item>
<!-- SIP T1 Timeout -->
<!-- 0.5 sec - 0.5sec, 1 sec - 1sec, 2 sec - 2sec -->
<item name= "account.{$line}.sip.timer.t1" > 0.5sec</item>
<!-- SIP T2 Timeout -->
<!-- 2 sec - 2sec, 4 sec - 4sec, 8 sec - 8sec -->
<item name= "account.{$line}.sip.timer.t2" > 4sec</item>
<!-- Outbound Proxy Mode -->
<!-- In Route, Not In Route, Always Sent To -->
<item name= "account.{$line}.sip.outboundProxy.mode" > In Route</item>
<!-- Enable 100rel -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.header.100rel" > No</item>
<!-- Use Route Set in NOTIFY(Follow RFC6665) -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.notify.route" > Yes</item>
<!-- Account 1 Session Timer -->
<!-- Enable Session Timer -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.sessionTimer.enable" > Yes</item>
<!-- Session Expiration (s) -->
<!-- Session Timer is disabled if the value is 0 -->
<item name= "account.{$line}.sip.sessionTimer.expiration" > 180</item>
<!-- Min - SE(s) -->
<item name= "account.{$line}.sip.minimumSE" > 90</item>
<!-- Caller Request Timer -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.sessionTimer.requestTimer.caller" > No</item>
<!-- Callee Request Timer -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.sessionTimer.requestTimer.callee" > No</item>
<!-- Force Timer -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.sessionTimer.force" > No</item>
<!-- UAC Specify Refresher -->
<!-- Omit, UAC, UAS -->
<item name= "account.{$line}.sip.sessionTimer.refresher.uacSpecify" > Omit</item>
<!-- UAS Specify Refresher -->
<!-- UAC - 1, UAS - 2 -->
<item name= "account.{$line}.sip.sessionTimer.refresher.uasSpecify" > 1</item>
<!-- Force INVITE -->
<!-- No, Yes -->
<item name= "account.{$line}.sip.sessionTimer.forceInvite" > No</item>
<!-- ############################################################################## -->
<!-- ## Account 1/ Codec Settings -->
<!-- ############################################################################## -->
<!-- Audio Settings -->
<!-- Preferred Vocoder -->
<!-- PCMU, PCMA, G.726 - 32, G.723.1, G.722, G.729A/B, iLBC, OPUS -->
<item name= "account.{$line}.codec.choice.1" > PCMU</item>
<item name= "account.{$line}.codec.choice.2" > PCMA</item>
<item name= "account.{$line}.codec.choice.3" > G.723.1</item>
<item name= "account.{$line}.codec.choice.4" > G.729A/B</item>
<item name= "account.{$line}.codec.choice.5" > G.722</item>
<item name= "account.{$line}.codec.choice.6" > iLBC</item>
<item name= "account.{$line}.codec.choice.7" > G.726-32</item>
<item name= "account.{$line}.codec.choice.8" > OPUS</item>
<!-- Codec Negotiation Priority -->
<!-- Caller, Callee -->
<item name= "account.{$line}.codec.negotiatePriority" > Callee</item>
<!-- Use First Matching Vocoder in 200OK SDP -->
<!-- No, Yes -->
<item name= "account.{$line}.codec.useFirstMatch" > No</item>
<!-- iLBC Frame Size -->
<!-- 20ms, 30ms -->
<item name= "account.{$line}.codec.iLBC.frameSize" > 30ms</item>
<!-- iLBC Payload Type -->
<item name= "account.{$line}.codec.payloadType.ilbc" > 97</item>
<!-- G.726 - 32 Packing Mode -->
<!-- ITU, IETF -->
<item name= "account.{$line}.codec.g723.32.packingMode" > ITU</item>
<!-- G.726 - 32 Dynamic Payload Type -->
<iitem name= "account.{$line}.codec.payloadType.g72632" > 127</iitem>
<!-- OPUS Payload Type -->
<item name= "account.{$line}.codec.payloadType.opus" > 123</item>
<!-- Send DTMF -->
<!-- No, Yes -->
<item name= "account.{$line}.dtmf.sendInAudio" > No</item>
<item name= "account.{$line}.dtmf.sendInRtp" > Yes</item>
<item name= "account.{$line}.dtmf.sendInSip" > No</item>
<!-- DTMF Payload Type -->
<item name= "account.{$line}.codec.payloadType.dtmf" > 101</item>
<!-- Enable Audio RED with FEC -->
<!-- Yes, No -->
<item name= "account.{$line}.audio.fec.enable" > Yes</item>
<!-- Audio FEC Payload Type -->
<!-- Number: 96 - 126 -->
<item name= "account.{$line}.codec.payloadType.fec.audio" > 121</item>
<!-- Audio RED Payload Type -->
<!-- Number: 96 - 126 -->
<item name= "account.{$line}.codec.payloadType.red" > 124</item>
<!-- Silence Suppression -->
<!-- No, Yes -->
<item name= "account.{$line}.audio.silenceSuppression" > No</item>
<!-- Jitter Buffer Type -->
<!-- Fixed, Adaptive -->
{if isset ($grandstream_jitter_adapt) & & $grandstream_jitter_adapt == 0}
<item name= "account.{$line}.audio.jitterBufferType" > Fixed</item>
{else}
<item name= "account.{$line}.audio.jitterBufferType" > Adaptive</item>
{/if}
<!-- Jitter Buffer Length -->
<!-- 100ms, 200ms, 300ms, 400ms, 500ms, 600ms, 700ms, 800ms -->
<item name= "account.{$line}.audio.jitterBufferLength" > 300ms</item>
<!-- Voice Frames per TX -->
<!-- Number: 1 - 64 -->
<item name= "account.{$line}.audio.voiceFramePerTX" > 2</item>
<!-- G723 Rate -->
<!-- 6.3kbpsEncodingRate, 5.3kbpsEncodingRate -->
<item name= "account.{$line}.codec.g723rate" > 5.3kbpsEncodingRate</item>
<!-- RTP Settings -->
<!-- SRTP Mode -->
<!-- Disabled, EnabledButNotForced, EnabledAndForced, Optional -->
{$srtp='Disabled'}
{if isset($grandstream_srtp)}
{if $grandstream_srtp==1}{$srtp='EnabledButNotForced'}{/if}
{if $grandstream_srtp==2}{$srtp='EnabledAndForced'}{/if}
{if $grandstream_srtp==3}{$srtp='Optional'}{/if}
{/if}
<item name= "account.{$line}.audio.srtpMode" > {$srtp}</item>
<!-- SRTP Key Length -->
<!-- AES128 And 256Bit, AES128 Bit, AES256 Bit -->
<item name= "account.{$line}.audio.srtpKeyLength" > AES128 And 256Bit</item>
<!-- Crypto Life Time -->
<!-- No, Yes -->
<item name= "account.{$line}.audio.cryptoLifeTime" > No</item>
<!-- RTCP Mode -->
<!-- Default, Negotiated, RTCPMux, RTCPMuxOnly -->
<item name= "account.{$line}.rtcp.port.selection" > Default</item>
<!-- RTCP Keep - Alive method -->
<!-- ReceiverReport, SenderReport -->
<item name= "account.{$line}.rtcp.keepAliveMethod" > ReceiverReport</item>
<!-- RTP Keep - Alive method -->
<!-- RTPVersion1, No -->
<item name= "account.{$line}.rtp.keepAliveMethod" > RTPVersion1</item>
<!-- Symmetric RTP -->
<!-- No, Yes -->
<item name= "account.{$line}.audio.symmetricRTP" > No</item>
<!-- RTP IP Filter -->
<!-- Disable,IPOnly,IPandPort -->
<item name = "account.{$line}.rtp.filter" > Disable</item>
<!-- RTP Timeout(s) -->
<item name = "account.{$line}.rtp.timeout" > 0</item>
<!-- ############################################################################## -->
<!-- ## Account 1/ Call Settings -->
<!-- ############################################################################## -->
<!-- General -->
<!-- Key as Send -->
<!-- Disabled, Pound, Star -->
<item name= "account.{$line}.call.keyAsSend" > Pound</item>
<!-- No Key Entry Timeout (s) -->
<!-- Number: 1 - 15 -->
<item name= "account.{$line}.call.noKeyEntryTimeout" > 4</item>
<!-- Send Anonymous -->
<!-- No, Yes -->
<item name= "account.{$line}.call.sendAnonymous" > No</item>
<!-- Anonymous Call Rejection -->
<!-- No, Yes -->
<item name= "account.{$line}.call.rejectAnonymousCall" > No</item>
<!-- Enable Call Waiting -->
<!-- Default, Yes, No -->
{$cw='Default'}
{if isset($grandstream_call_waiting)}
{if $grandstream_call_waiting==1}{$cw='No'}{/if}
{if $grandstream_call_waiting==2}{$cw='Yes'}{/if}
{/if}
<item name= "account.{$line}.call.callWaiting" > {$cw}</item>
<!-- RFC2543 Hold -->
<!-- Yes, No -->
<item name= "account.{$line}.call.rfc2543Hold.enable" > Yes</item>
<!-- Ring Timeout -->
<!-- Number: 10 - 300 -->
{if isset($grandstream_ring_timeout)}
<item name= "account.{$line}.ring.timeout" > {$grandstream_ring_timeout}</item>
{else}
<item name= "account.{$line}.ring.timeout" > 60</item>
{/if}
<!-- Auto Answer -->
<!-- No, Yes -->
<item name= "account.{$line}.call.autoAnswer" > No</item>
<!-- Auto Answer Numbers -->
<!-- # String -->
<item name= "account.{$line}.call.autoAnswerNumber" > </item>
<!-- Intercom -->
<!-- Play warning tone for Auto Answer Intercom -->
<!-- No, Yes -->
<item name= "account.{$line}.intercom.playWarningToneForAutoAnswer" > Yes</item>
<!-- # Custom Alert - Info for Auto Answer. -->
<!-- # String -->
<item name= "account.{$line}.intercom.customCallInfoForAutoAnswer" > </item>
<!-- # Allow Auto Answer by Call - Info/Alert - Info. 0 - No, 1 - Yes. Default is Yes -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<item name= "account.{$line}.intercom.allowAutoAnswer" > Yes</item>
<!-- Allow Barging by Call - Info/Alert - Info -->
<!-- No, Yes -->
<item name= "account.{$line}.intercom.allowBargingByCallInfo" > No</item>
<!-- Mute on Intercom Auto Answer -->
<!-- No, Yes -->
<item name= "account.{$line}.intercom.muteOnAnswerIntercom" > No</item>
<!-- Transfer -->
<!-- Transfer on Conference Hangup -->
<!-- Yes, No -->
<item name= "account.{$line}.call.transferOnConferenceHangup" > No</item>
<!-- Enable Local Call Features -->
<!-- Yes, No -->
{if isset($grandstream_enable_call_features) & & $grandstream_enable_call_features == 1}
<item name= "account.{$line}.featureCodes.callFeatures" > Yes</item>
{else}
<item name= "account.{$line}.featureCodes.callFeatures" > No</item>
{/if}
<!-- Enable Recovery on Blind Transfer -->
<item name= "account.{$line}.call.recoveryOnBlindTransfer" > Yes</item>
<!-- Blind Transfer Wait Timeout -->
<!-- Number: 30 - 300 -->
<item name= "account.{$line}.call.blindTransferTimeout" > 30</item>
<!-- Refer - To Use Target Contact -->
<!-- Yes, No -->
<item name= "account.{$line}.call.referToUseTargetContact" > No</item>
<!-- Dial Plan -->
<!-- Dial Plan Prefix -->
<item name= "account.{$line}.call.dialplanPrefix" > {$grandstream_dial_prefix}</item>
<!-- Bypass Dial Plan -->
<!-- contact,incoming,outgoing,dialing,Mpk,api -->
<item name= "account.{$line}.call.dialplanBypass" > Mpk</item>
<!-- Dial Plan -->
{if isset($grandstream_dial_plan) }
<item name= "account.{$line}.call.dialplan" > {$grandstream_dial_plan}</item>
{else}
<item name= "account.{$line}.call.dialplan" > {literal}{x+|*x+|*++|\p\a\r\k\+*x+|\p\a\r\k\+x+|\f\l\o\w\+*x+}{/literal}</item>
{/if}
<!-- Ringtone -->
<!-- Account Ringtone -->
<!-- SystemRingtone,Ring1,Ring2,Ring3,Ring4,Ring5,Ring6,Doorbell -->
{$rt='Ring5'}
{if isset($grandstream_account_ring_tone_1)}
{if $grandstream_account_ring_tone_1 == 0}{$rt='SystemRingtone'}{/if}
{if $grandstream_account_ring_tone_1 == 1}{$rt='Ring1'}{/if}
{if $grandstream_account_ring_tone_1 == 2}{$rt='Ring2'}{/if}
{if $grandstream_account_ring_tone_1 == 3}{$rt='Ring3'}{/if}
{if $grandstream_account_ring_tone_1 == 4}{$rt='Ring4'}{/if}
{if $grandstream_account_ring_tone_1 == 5}{$rt='Ring5'}{/if}
{if $grandstream_account_ring_tone_1 == 6}{$rt='Ring6'}{/if}
{if $grandstream_account_ring_tone_1 == 7}{$rt='Doorbell'}{/if}
{/if}
<item name= "account.{$line}.ring.ringtone" > {$rt}</item>
<!-- Ignore Alert - Info header -->
<!-- Yes, No -->
<item name= "account.{$line}.ring.ignoreSipAlertInfo" > No</item>
<!-- Matching Incoming Caller ID. Matching Rule 1 -->
{if isset($grandstream_distinctive_ringtone_name_1)}
<item name= "account.{$line}.ring.match.1.callerId" > {$grandstream_distinctive_ringtone_name_1}</item>
{else}
<item name= "account.{$line}.ring.match.1.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.1.ringtone" > {$grandstream_distinctive_ringtone_1}</item>
<!-- Match Incoming Caller ID. Matching Rule 2 -->
{if isset($grandstream_distinctive_ringtone_name_2)}
<item name= "account.{$line}.ring.match.2.callerId" > {$grandstream_distinctive_ringtone_name_2}</item>
{else}
<item name= "account.{$line}.ring.match.2.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.2.ringtone" > {$grandstream_distinctive_ringtone_2}</item>
<!-- Match Incoming Caller ID. Matching Rule 3 -->
{if isset($grandstream_distinctive_ringtone_name_3)}
<item name= "account.{$line}.ring.match.3.callerId" > {$grandstream_distinctive_ringtone_name_3}</item>
{else}
<item name= "account.{$line}.ring.match.3.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.3.ringtone" > {$grandstream_distinctive_ringtone_3}</item>
<!-- Match Incoming Caller ID. Matching Rule 4 -->
{if isset($grandstream_distinctive_ringtone_name_4)}
<item name= "account.{$line}.ring.match.4.callerId" > {$grandstream_distinctive_ringtone_name_4}</item>
{else}
<item name= "account.{$line}.ring.match.4.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.4.ringtone" > {$grandstream_distinctive_ringtone_4}</item>
<!-- Match Incoming Caller ID. Matching Rule 5 -->
{if isset($grandstream_distinctive_ringtone_name_5)}
<item name= "account.{$line}.ring.match.5.callerId" > {$grandstream_distinctive_ringtone_name_5}</item>
{else}
<item name= "account.{$line}.ring.match.5.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.5.ringtone" > {$grandstream_distinctive_ringtone_5}</item>
<!-- Match Incoming Caller ID. Matching Rule 6 -->
{if isset($grandstream_distinctive_ringtone_name_6)}
<item name= "account.{$line}.ring.match.6.callerId" > {$grandstream_distinctive_ringtone_name_6}</item>
{else}
<item name= "account.{$line}.ring.match.6.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.6.ringtone" > {$grandstream_distinctive_ringtone_6}</item>
<!-- Match Incoming Caller ID. Matching Rule 7 -->
{if isset($grandstream_distinctive_ringtone_name_7)}
<item name= "account.{$line}.ring.match.7.callerId" > {$grandstream_distinctive_ringtone_name_7}</item>
{else}
<item name= "account.{$line}.ring.match.7.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.7.ringtone" > {$grandstream_distinctive_ringtone_7}</item>
<!-- Match Incoming Caller ID. Matching Rule 8 -->
{if isset($grandstream_distinctive_ringtone_name_8)}
<item name= "account.{$line}.ring.match.8.callerId" > {$grandstream_distinctive_ringtone_name_8}</item>
{else}
<item name= "account.{$line}.ring.match.8.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.8.ringtone" > {$grandstream_distinctive_ringtone_8}</item>
<!-- Match Incoming Caller ID. Matching Rule 9 -->
{if isset($grandstream_distinctive_ringtone_name_9)}
<item name= "account.{$line}.ring.match.9.callerId" > {$grandstream_distinctive_ringtone_name_9}</item>
{else}
<item name= "account.{$line}.ring.match.9.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.9.ringtone" > {$grandstream_distinctive_ringtone_9}</item>
<!-- Match Incoming Caller ID. Matching Rule 10 -->
{if isset($grandstream_distinctive_ringtone_name_10)}
<item name= "account.{$line}.ring.match.10.callerId" > {$grandstream_distinctive_ringtone_name_10}</item>
{else}
<item name= "account.{$line}.ring.match.10.callerId" > </item>
{/if}
<!-- Distinctive Ring Tone -->
<!-- 0 - system ringtone, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell -->
<item name= "account.{$line}.ring.match.10.ringtone" > {$grandstream_distinctive_ringtone_10}</item>
<!-- ############################################################################## -->
<!-- ## Account 1/ Advanced Features -->
<!-- ############################################################################## -->
<!-- Account 1 Security Settings -->
<!-- Check Domain Certificates -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.validate.domainCertificates" > No</item>
<!-- Validate Certification Chain -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.validate.certificationChain" > No</item>
<!-- Validate Incoming SIP Messages -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.validate.incomingMessage" > No</item>
<!-- Allow Unsolicited REFER -->
<!-- Disabled, Enabled, EnabledOrForceAuth -->
<item name= "account.{$line}.sip.allowUnsolicitedRefer" > Disabled</item>
<!-- Accept Incoming SIP from Proxy Only -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.validate.incomingServer" > Yes</item>
<!-- Check SIP User ID for Incoming INVITE -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.validate.userIdforInvite" > No</item>
<!-- Allow SIP Reset -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.allowSipReset" > No</item>
<!-- Authenticate Incoming INVITE -->
<!-- Yes, No -->
<item name= "account.{$line}.sip.authenticateIncomingInvite" > No</item>
<!-- Account 1 MOH -->
<!-- On Hold Reminder Tone -->
<!-- Yes, No -->
<item name= "account.{$line}.call.onHoldReminderTone" > No</item>
<!-- Music On Hold URI -->
<item name= "account.{$line}.sip.musicOnHoldUri" > </item>
<!-- Account 1 Advanced Features -->
<!-- Special Feature -->
<!-- Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro, Huawai IMS, Phonepower, UCM Call Center,Zoom -->
<item name= "account.{$line}.sip.specialFeature" > Standard</item>
{/for}
<!-- ############################################################################## -->
<!-- ## Phone Settings/General Settings -->
<!-- ############################################################################## -->
<!-- # Local RTP Port. Default is 5004 -->
<!-- # Number: 1024 - 65400. Must be even number -->
<!-- Number: 5004 - 65535 -->
<item name= "network.rtp.local.port" > 5004</item>
<!-- # Local RTP Port Range. Default is 200 -->
<!-- # Number: 48 - 10000 -->
<item name= "network.rtp.local.portRange" > 200</item>
<!-- Use Random Port -->
<!-- Yes, No -->
<item name= "network.rtp.useRandomPort" > Yes</item>
<!-- Keep - Alive Interval (s) -->
<!-- Number: 10 - 160 -->
<item name= "sip.keepAliveInterval" > 20</item>
<!-- STUN Server -->
<item name= "network.stunServer" > </item>
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50 -->
<!-- String: a - z, A - Z, 0 - 9, ".", ":" -->
<item name= "sip.userNatIp" > </item>
<!-- Delay Registration. Default is 0. -->
<!-- Number: 0 - 90 -->
<item name= "sip.delayRegistration" > 0</item>
<!-- Enable Outbound Notification. No or Yes. -->
<item name= "ons.enable" > Yes</item>
<!-- ############################################################################## -->
<!-- ## Settings/Call Settings -->
<!-- ############################################################################## -->
<!-- # Preferred Default Account. -->
<!-- # Account1 - Account6 -->
<item name= "call.dial.preferredAccount" > Account1</item>
<!-- # Mute Key Functions While Idle. DND, IdleMute, Disabled. -->
{$mki='DND'}
{if isset($grandstream_idle_mute_function)}
{if $grandstream_idle_mute_function == 1}{$mki='IdleMute'}{/if}
{if $grandstream_idle_mute_function == 2}{$mki='Disabled'}{/if}
{/if}
<item name= "keys.custom.mute.idle" > {$mki}</item>
<!-- # Do not Escape '#' as 23% in SIP URL. -->
<!-- # Invert_Yes_No, Yes - No, No - Yes -->
<item name= "sip.escapeUrl" > Yes</item>
<!-- # User - Agent Prefix -->
<item name= "device.userAgentPrefix" > </item>
<!-- # Enable Direct IP Call. -->
<!-- Yes, No -->
<item name= "call.ipcall.enable" > Yes</item>
<!-- # Onhook Dial Barging -->
<!-- Yes, No -->
{if isset($grandstream_onhook_dial_barging) & & $grandstream_onhook_dial_barging == 0}
<item name= "call.dial.offhook.allowBarging" > No</item>
{else}
<item name= "call.dial.offhook.allowBarging" > Yes</item>
{/if}
<!-- # Off - hook Auto Dial -->
<!-- # String -->
<item name= "call.dial.offhook.autoDial.number" > </item>
<!-- # Off - hook Auto Dial Delay -->
<!-- # Number: 0 - 10 -->
<item name= "call.dial.offhook.autoDial.delay" > 0</item>
<!-- # Off - hook/On - hook Timeout (s). Default is 30 -->
<item name= "call.dial.offhook.timeout" > 30</item>
<!-- # Redial Expiration (min). Default is 30 -->
<!-- # Number: 0 - 1440 -->
<item name= "call.redial.expiration" > 30</item>
<!-- # Allow Incoming Call Before Ringing. Yes or No -->
<item name= "callFeatures.allowIncomingCallBeforeRinging" > No</item>
<!-- # Enable Call Waiting. -->
<!-- Yes, No -->
{if isset($grandstream_call_waiting) & & $grandstream_call_waiting == 1}
<item name= "call.callWaiting.enable" > No</item>
{else}
<item name= "call.callWaiting.enable" > Yes</item>
{/if}
<!-- # Enable Call Waiting Tone. -->
<!-- Yes, No -->
{if isset($grandstream_call_waiting)}
{if $grandstream_call_waiting == "1"} <item name= "call.callWaiting.enableTone" > No</item> {/if}
{if $grandstream_call_waiting == "2"} <item name= "call.callWaiting.enableTone" > Yes</item> {/if}
{/if}
<!-- # Auto Answer Delay -->
<!-- # String -->
<item name= "call.autoAnswerDelay.value" > 0</item>
<!-- Enable Auto Unmute. Yes or No -->
<item name= "callFeatures.autoUnmute.enable" > Yes</item>
<!-- Enable Busy Tone on Remote Disconnect. Yes or No -->
<item name= "call.disconnect.remote.enableTone" > No</item>
<!-- Enable Mute Key In Call. Yes or No -->
<item name= "call.disable.mute.key" > No</item>
<!-- Enable Transfer. Yes or No -->
<item name= "call.transfer.enable" > Yes</item>
<!-- # Hold Call Before Completing Transfer. Yes or No -->
<item name= "call.transfer.holdCall.enable" > Yes</item>
<!-- Enable Conference. Yes or No -->
<item name= "call.conference.enable" > Yes</item>
<!-- ############################################################################## -->
<!-- ## Phone Settings/Ringtone -->
<!-- ############################################################################## -->
<!-- # System Ringtone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.systemRing" > f1=440,f2=480,c=200/400;</item>
<!-- # Dial Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.dial" > f1=350,f2=440;</item>
<!-- # Second Dial Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.secondDial" > f1=350,f2=440;</item>
<!-- # Message Waiting -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.message" > f1=350,f2=440,c=10/10;</item>
<!-- # Ring Back Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.ringBack" > f1=440,f2=480,c=200/400;</item>
<!-- # Call Waiting Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.callWaiting" > f1=440,f2=440,c=25/525;</item>
<!-- # Call Waiting Tone Gain -->
<!-- # Option Low, Medium, High -->
<item name= "audio.tone.callWaiting.gain" > Low</item>
<!-- # Busy Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.busy" > f1=480,f2=620,c=50/50;</item>
<!-- # Reorder Tone -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "audio.tone.reorder" > f1=480,f2=620,c=25/25;</item>
<!-- ############################################################################## -->
<!-- ## Phone Settings/Multicast Paging -->
<!-- ############################################################################## -->
<!-- Paging Barge -->
<!-- Disable, priority1, priority2, priority3, priority4, priority5, priority6, priority7, priority8, priority9, priority10 -->
<item name= "multicast.paginBarge" > Disable</item>
<!-- Paging Priority Active -->
<!-- Yes, No -->
<item name= "multicast.pagingPriorityActive" > No</item>
<!-- # Multicase Channel Number -->
<!-- # Number: 0 - 50 (0 for normal RTP packets, 1 - 50 for Polycom multicast format packets). Default is 0 -->
<item name= "multicast.channel" > 0</item>
<!-- ### Multicast Listening ### -->
<!-- # Priority 1 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.1.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.1.label" > </item>
<!-- # Priority 2 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.2.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.2.label" > </item>
<!-- # Priority 3 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.3.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.3.label" > </item>
<!-- # Priority 4 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.4.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.4.label" > </item>
<!-- # Priority 5 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.5.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.5.label" > </item>
<!-- # Priority 6 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.6.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.6.label" > </item>
<!-- # Priority 7 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.7.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.7.label" > </item>
<!-- # Priority 8 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.8.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.8.label" > </item>
<!-- # Priority 9 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.9.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.9.label" > </item>
<!-- # Priority 10 -->
<!-- # Listening Address -->
<!-- # String -->
<item name= "multicast.listening.10.address" > </item>
<!-- # Label -->
<!-- # String -->
<item name= "multicast.listening.10.label" > </item>
<!-- ################################################################### -->
<!-- ## Network/Ethernet Settings ## -->
<!-- ################################################################### -->
<!-- Ethernet Settings -->
<!-- Preferred Internet Protocol -->
<!-- BothAndPreferIPv4, BothAndPreferIPv6, IPv4Only, IPv6Only -->
{$ippref='IPv4Only'}
{if isset($grandstream_ipv_mode)}
{if $grandstream_ipv_mode == 0}{$ippref='BothAndPreferIPv4'}{/if}
{if $grandstream_ipv_mode == 1}{$ippref='BothAndPreferIPv6'}{/if}
{if $grandstream_ipv_mode == 2}{$ippref='IPv4Only'}{/if}
{if $grandstream_ipv_mode == 3}{$ippref='IPv6Only'}{/if}
{/if}
<item name= "network.internetProtocol" > {$ippref}</item>
<!-- IPv4 Address Type -->
<!-- DHCP, Static IP -->
{if isset($grandstream_ip_address_mode) & & $grandstream_ip_address_mode == 1}
<item name= "network.port.eth.1.type" > Static IP</item>
{else}
<item name= "network.port.eth.1.type" > DHCP</item>
{/if}
<!-- ########################################## -->
<!-- # DHCP -->
<!-- ########################################## -->
<!-- Host Name(Option 12) -->
<item name= "network.dhcp.hostName" > phone-{$mac|replace:'-':''}</item>
<!-- Vendor Class ID(Option 60) -->
<!-- <item name="network.dhcp.vendorID"></item> -->
<!-- ########################################## -->
<!-- # Statically Configured -->
<!-- ########################################## -->
<!-- # IP Address. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<!-- IP Address -->
{if isset($grandstream_ipv4octet_1)}<item name= "network.port.eth.1.address.1" > {$grandstream_ipv4octet_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4octet_2)}<item name= "network.port.eth.1.address.2" > {$grandstream_ipv4octet_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4octet_3)}<item name= "network.port.eth.1.address.3" > {$grandstream_ipv4octet_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4octet_4)}<item name= "network.port.eth.1.address.4" > {$grandstream_ipv4octet_4}</item> {/if}
<!-- # Subnet mask. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
<!-- Subnet Mask -->
{if isset($grandstream_ipv4mask_1)}<item name= "network.port.eth.1.mask.1" > {$grandstream_ipv4mask_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4mask_2)}<item name= "network.port.eth.1.mask.2" > {$grandstream_ipv4mask_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4mask_3)}<item name= "network.port.eth.1.mask.3" > {$grandstream_ipv4mask_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4mask_4)}<item name= "network.port.eth.1.mask.4" > {$grandstream_ipv4mask_4}</item> {/if}
<!-- # Gateway. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4gw_1)}<item name= "network.port.eth.1.gateway.1" > {$grandstream_ipv4gw_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4gw_1)}<item name= "network.port.eth.1.gateway.2" > {$grandstream_ipv4gw_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4gw_1)}<item name= "network.port.eth.1.gateway.3" > {$grandstream_ipv4gw_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4gw_1)}<item name= "network.port.eth.1.gateway.4" > {$grandstream_ipv4gw_4}</item> {/if}
<!-- # DNS 1 Server. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns1_1)}<item name= "network.dns.1.ip.1" > {$grandstream_ipv4dns1_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns1_2)}<item name= "network.dns.1.ip.2" > {$grandstream_ipv4dns1_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns1_3)}<item name= "network.dns.1.ip.3" > {$grandstream_ipv4dns1_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns1_4)}<item name= "network.dns.1.ip.4" > {$grandstream_ipv4dns1_4}</item> {/if}
<!-- # DNS 2 Server. Ignore if DHCP or PPPoE is used -->
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns2_1)}<item name= "network.dns.2.ip.1" > {$grandstream_ipv4dns2_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns2_2)}<item name= "network.dns.2.ip.2" > {$grandstream_ipv4dns2_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns2_3)}<item name= "network.dns.2.ip.3" > {$grandstream_ipv4dns2_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4dns2_4)}<item name= "network.dns.2.ip.4" > {$grandstream_ipv4dns2_4}</item> {/if}
<!-- # Preferred DNS server. (if specified). -->
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4preferdns_1)}<item name= "network.dns.preferred.ip.1" > {$grandstream_ipv4preferdns_1}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4preferdns_2)}<item name= "network.dns.preferred.ip.2" > {$grandstream_ipv4preferdns_2}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4preferdns_3)}<item name= "network.dns.preferred.ip.3" > {$grandstream_ipv4preferdns_3}</item> {/if}
<!-- # Number: 0 - 255 -->
{if isset($grandstream_ipv4preferdns_4)}<item name= "network.dns.preferred.ip.4" > {$grandstream_ipv4preferdns_4}</item> {/if}
<!-- # IPv6 Address type. 0 - Auto Configured, 1 - Statically Configured. Default is 0. -->
<!-- # Number: 0, 1 -->
<!-- # Mandatory -->
<!-- IPv6 Address -->
<!-- AutoConfigured, StaticallyConfigured -->
<item name= "network.port.eth.1.ipv6.type" > AutoConfigured</item>
<!-- FullStatic(Default), PrefixStatic -->
<item name= "network.port.eth.1.ipv6.static.mode" > </item>
<!-- Static IPv6 Address -->
<item name= "network.port.eth.1.ipv6.static.address" > </item>
<!-- IPv6 Prefix Length -->
<item name= "network.port.eth.1.ipv6.static.prefixLength" > </item>
<!-- # Prefix Static: IPv6 Prefix (64bits) -->
<item name= "network.port.eth.1.ipv6.static.prefix" > </item>
<!-- DNS Server 1 -->
<!-- # String: a - z, A - Z, 0 - 9, ".", ":", "[", "]" -->
<item name= "network.dns.1.ipv6" > </item>
<!-- DNS Server 2 -->
<!-- # String: a - z, A - Z, 0 - 9, ".", ":", "[", "]" -->
<item name= "network.dns.2.ipv6" > </item>
<!-- # Preferred DNS Server for IPv6 Address -->
<!-- # String: a - z, A - Z, 0 - 9, ".", ":", "[", "]" -->
<item name= "network.dns.preferred.ipv6" > </item>
<!-- ############################################################################## -->
<!-- ## Network Settings/Advanced Settings -->
<!-- ############################################################################## -->
<!-- DNS Refresh Timer (m) -->
<item name= "network.dns.refreshTime" > 0</item>
<!-- DNS Failure Cache Duration (m) -->
<item name= "network.dns.failureCacheDuration" > 0</item>
<!-- Enable LLDP -->
<!-- Yes, No -->
<item name= "network.lldp.enable" > Yes</item>
<!-- LLDP TX Interval (s) -->
<item name= "network.lldp.txInterval" > 30</item>
<!-- Enable CDP -->
<!-- Yes, No -->
<item name= "network.cdp" > Yes</item>
<!-- # Layer 3 QoS for SIP -->
<!-- # Number:0 - 63 -->
<!-- # Mandatory -->
<item name= "network.qos.forSip" > 26</item>
<!-- # Layer 3 QoS for RTP -->
<!-- # Number:0 - 63 -->
<!-- # Mandatory -->
<item name= "network.qos.forRtp" > 46</item>
<!-- # Enable DHCP VLAN. Yes or No -->
<!-- # Mandatory -->
<item name= "network.dhcp.enableVlan" > No</item>
<!-- # Enable Manual VLAN Configuration. Yes or No. -->
<!-- # Mandatory -->
{if isset($grandstream_lan_port_vlan) }
<item name= "network.port.eth.1.vlan.enable" > Yes</item>
{else}
<item name= "network.port.eth.1.vlan.enable" > No</item>
{/if}
<!-- # Layer 2 QoS 802.1Q/VLAN Tag. Default is 0 -->
{if isset($grandstream_lan_port_vlan) }
<item name= "network.port.eth.1.vlan.tag" > {$grandstream_lan_port_vlan}</item>
{else}
<item name= "network.port.eth.1.vlan.tag" > 0</item>
{/if}
<!-- # Layer 2 QoS 802.1p Priority Value. Default is 0 -->
<!-- # Number:0 - 7 -->
<item name= "network.port.eth.1.vlan.priority" > 0</item>
<!-- # Maximum Transmission Unit (MTU). Default is 1500 -->
<!-- # Number -->
<item name= "network.mtu" > 1500</item>
<!-- # Action URI Support. Yes or No -->
<item name= "Action URI Support" > Yes</item>
<!-- Action URI Allowed IP List -->
<item name= "remoteControl.allowList" > </item>
<!-- # CSTA Control. Yes or No -->
<item name= "remoteControl.csta.enable" > No</item>
<!-- ############################################################################## -->
<!-- ## Network Settings/Wi - Fi Settings -->
<!-- ############################################################################## -->
<!-- Wi - Fi Function -->
<!-- On, Off -->
<item name= "network.wifi.enable" > On</item>
<!-- Wi - Fi Band -->
<!-- Auto,2.4GHz,5GHz -->
<item name= "network.wifi.band" > Auto</item>
<!-- Country Code (for global version only) -->
<!-- "UNITEDARABEMIRATES","ALBANIA","ARMENIA","NETHERLANDSANTILLES","ARGENTINA","AUSTRALIA","ARUBA","AZERBAIJAN","BOSNIA","BARBADOS","BANGLADESH","BELGIUM","BULGARIA","BAHRAIN","BURUNDI","BENIN","BERMUDA","BRUNEI","BOLIVIA","BRAZIL","BAHAMAS","BOTSWANA","BELARUS","BELIZE","CANADA","CONGO","SWITZERLAND","CHILE","CHINA","COLOMBIA","COSTA","CYPRUS","CZECH","GERMANY","DENMARK","DOMINICAN","ALGERIA","ECUADOR","ESTONIA","EGYPT","SPAIN","ETHIOPIA","FINLAND","FIJI","FRANCE","GERNADA","GEORGIA","GHANA","GIBRALTAR","GREENLAND","GAMBIA","GUINEA","GUADELOUPE","GREECE","GUATEMALA","GUAM","GUYANA","HONGKONG","DONDURAS","CROATIA","HAITI","HUNGARY","INDONESIA","IRELAND","ISRAEL","INDIA","ICELAND","ITALY","JERSEY","JAMAICA","JORDAN","JAPAN","KENYA","KYRGYZSTAN","CAMBODIA","SOUTHKOREA","KUWAIT","CAYMAN","KAZAKHSTAN","LEBANON","LIECHTENSTEIN","SRILANKA","LIBERIA","LITHUANIA","LUXEMBOURG","LATVIA","MOROCOO","MONACO","MONTENEGRO","MACEDONIA","MALI","MONGOLIA","MACAU","MALT","MEXICO","MALAYSIA","NIGER","NIGERIA","NICARAGUA","NETHERLANDS","NEPAL","NEWZEALNAD","OMAN","PANAMA","PERU","PAPUA","PHILIPPINES","PAKISTAN","POLAND","PUERTORICO","PORTUGAL","PARAGUAY","QATAR","ROMANIA","SERBIA","RUSSIA","RWANDA","SAUDIARABIA","SWEDEN","SINGAPORE","SLOVAKIA","SLOVENIA","SIERRALEONE","TOGO","THAILAND","TURKMENISTAN","TUNISIA","TURKEY","TRINIDAD","TAIWAN","UKRAINE","UGANDA","UNITEDKINGDOM","UNITEDSTATES","URUGUAY","VENEZUELA","VERGINISLANDS","VIETNAM","YEMEN","SOUTHAFRICA","ZAMBIA","ZIMBABWE" -->
<item name= "network.wifi.countryCode.public" > UNITEDSTATES</item>
<!-- ############################################################################## -->
<!-- ## Network Settings/Wi - Fi Settings/Available Wi - Fi/ Wi - Fi 1/2/3 -->
<!-- ############################################################################## -->
<!-- Note: This section includes settings for Wi - Fi 1 only. To update item name to "network.wifi.ssid.i...", where i is the Wi - Fi index. -->
<!-- To update Wi - Fi 2 related options, update item name to "network.wifi.ssid.1..." -->
<!-- To update Wi - Fi 3 related options, update item name to "network.wifi.ssid.2..." -->
<!-- ESSID -->
<!-- <item name="network.wifi.ssid.0.essid"></item> -->
<!-- Security Mode -->
<!-- None,WEP,WPA_PSK,WPA_EAP,Auto,WPA3_SAE_LEGACY,WPA3_EAP_LEGACY -->
<!-- <item name="network.wifi.ssid.0.key_management">None</item> -->
<!-- Password -->
<!-- <item name="network.wifi.ssid.0.psk"></item> -->
<!-- Network Priority -->
<!-- Number: 0=Low,1=Medium,2=High -->
<!-- <item name="network.wifi.ssid.0.priority">0</item> -->
<!-- EAP Method -->
<!-- PEAP,TLS,TTLS,PWD -->
<!-- <item name="network.wifi.ssid.0.eap_method">PWD</item> -->
<!-- Phase 2 Authentication -->
<!-- NONE,PAP,MSCHAP,MSCHAPV2,GTC -->
<!-- <item name="network.wifi.ssid.0.eap.peap.phase2.auth_type">None</item> -->
<!-- CA Certificate -->
<!-- <item name="network.wifi.ssid.0.eap.peap.phase1.ca"></item> -->
<!-- Anonymous Identity -->
<!-- <item name="network.wifi.ssid.0.eap.pea.phase1.anon_identity"></item> -->
<!-- Identity -->
<!-- <item name="network.wifi.ssid.0.eap.peap.phase2.mschapv2.identity"></item> -->
<!-- Identity Password -->
<!-- <item name="network.wifi.ssid.0.eap.peap.phase2.mschapv2.password"></item> -->
<!-- TLS CA Certificate -->
<!-- <item name="network.wifi.ssid.0.eap.tls.ca"></item> -->
<!-- TLS Client Certificate -->
<!-- <item name="network.wifi.ssid.0.eap.tls.user_certificate"></item> -->
<!-- TLS Identity -->
<!-- <item name="network.wifi.ssid.0.eap.tls.identity"></item> -->
<!-- TLS Client Certificate Password -->
<!-- <item name="network.wifi.ssid.0.eap.tls.private_key_password"></item> -->
<!-- PWD Identity -->
<!-- <item name="network.wifi.ssid.0.eap.pwd.identity"></item> -->
<!-- PWD Identity Password -->
<!-- <item name="network.wifi.ssid.0.eap.pwd.password"></item> -->
<!-- IP Mode -->
<!-- BothAndPreferIPv4,BothAndPreferIPv6,IPv4Only,IPv6Only -->
<!-- <item name="network.wifi.ssid.0.ip.protocol">BothAndPreferIPv4</item> -->
<!-- IPv4 Mode -->
<!-- DHCP,StaticIP -->
<!-- <item name="network.wifi.ssid.0.ipv4.address_mode">DHCP</item> -->
<!-- IPv6 Mode -->
<!-- DHCP,StaticIP -->
<!-- <item name="network.wifi.ssid.0.ipv6.address_mode">DHCP</item> -->
<!-- ########################################## -->
<!-- # IPv4 Statically Configured -->
<!-- ########################################## -->
<!-- # IPv4 Address -->
<!-- <item name="network.wifi.ssid.0.ipv4.ip.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.ip.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.ip.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.ip.4"></item> -->
<!-- # Subnet Mask -->
<!-- <item name="network.wifi.ssid.0.ipv4.netmask.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.netmask.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.netmask.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.netmask.4"></item> -->
<!-- # Gateway -->
<!-- <item name="network.wifi.ssid.0.ipv4.gateway.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.gateway.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.gateway.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.gateway.4"></item> -->
<!-- # DNS Server 1 -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns1.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns1.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns1.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns1.4"></item> -->
<!-- # DNS Server 2 -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns2.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns2.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns2.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.dns2.4"></item> -->
<!-- # Preferred DNS server -->
<!-- <item name="network.wifi.ssid.0.ipv4.preferred_dns.1"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.preferred_dns.2"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.preferred_dns.3"></item> -->
<!-- <item name="network.wifi.ssid.0.ipv4.preferred_dns.4"></item> -->
<!-- ########################################## -->
<!-- # IPv6 Statically Configured -->
<!-- ########################################## -->
<!-- # Static Mode -->
<!-- FullStatic,PrefixStatic -->
<!-- <item name="network.wifi.ssid.0.ipv6.static_mode">FullStatic</item> -->
<!-- # IPv6 Address -->
<!-- <item name="network.wifi.ssid.0.ipv6.static_address"></item> -->
<!-- # IPv6 Prefix length -->
<!-- <item name="network.wifi.ssid.0.ipv6.prefix_length">0</item> -->
<!-- # IPv6 Prefix (64 bits) -->
<!-- <item name="network.wifi.ssid.0.ipv6.prefix"></item> -->
<!-- # DNS Server 1 -->
<!-- <item name="network.wifi.ssid.0.ipv6.dns1"></item> -->
<!-- # DNS Server 2 -->
<!-- <item name="network.wifi.ssid.0.ipv6.dns2"></item> -->
<!-- # Preferred DNS server -->
<!-- <item name="network.wifi.ssid.0.ipv6.preferred_dns"></item> -->
<!-- ############################################################################## -->
<!-- ## Programmable Keys /Multi - Purpose Keys -->
<!-- ############################################################################## -->
<!-- ###################################################################################### -->
<!-- # MPK 1 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
{$key_types=[""=>"None", "none"=>"None", "default"=>"Default", "line"=>"Line", "shared line"=>"SharedLine", "speed dial"=>"SpeedDial", "blf"=>"BLF", "presence watcher"=>"PresenceWatcher", "eventlist blf"=>"EventlistBLF","speed dial active"=>"SpeedDialViaActiveAccount","dial dtmf"=>"DialDTMF","voicemail"=>"VoiceMail","call return"=>"CallReturn","transfer"=>"Transfer","call park"=>"CallPark","intercom"=>"Intercom","ldap search"=>"LDAPSearch","conference"=>"Conference","multicast paging"=>"MulticastPaging","record"=>"Record","call log"=>"CallLog","monitored call park"=>"MonitoredCallPark","menu"=>"Menu"]}
{for $line=1 to 6}
{if !isset($keys.line[$line])}
{$keys.line[$line] = ["device_key_id" => $line, "device_key_type" => "", "device_key_line" => "", "device_key_label" => "", "device_key_value" => ""]}
{/if}
{$row=$keys.line[$line]}
{$row.device_key_id = $row.device_key_id + 10}
<item name= "pks.mpk.{$row.device_key_id}.keyMode" > {$key_types[$row.device_key_type]}</item>
<!-- # Account -->
<!-- # Account1, Account2 -->
<item name= "pks.mpk.{$row.device_key_id}.account" > {if !empty($row.device_key_line)}Account{$row.device_key_line}{/if}</item>
<!-- MPK Value -->
<item name= "pks.mpk.{$row.device_key_id}.value" > {$row.device_key_value}</item>
<!-- MPK Label -->
<item name= "pks.mpk.{$row.device_key_id}.description" > {$row.device_key_label}</item>
{/for}
<!-- ###################################################################################### -->
<!-- # MPK 2 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDS OpenDoor (27) -->
<!-- <item name="pks.mpk.12.keyMode">None</item> --> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.12.account"></item> --> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.12.value"></item> --> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.12.description"></item> --> -->
<!-- ###################################################################################### -->
<!-- # MPK 3 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.13.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.13.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.13.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.13.description"></item> -->
<!-- ###################################################################################### -->
<!-- # MPK 4 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.14.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.14.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.14.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.14.description"></item> -->
<!-- ###################################################################################### -->
<!-- # MPK 5 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.15.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.15.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.15.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.15.description"></item> -->
<!-- ###################################################################################### -->
<!-- # MPK 6 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.16.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.16.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.16.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.16.description"></item> -->
<!-- ############################################################################## -->
<!-- ## Programmable Keys / Speed Dial -->
<!-- ############################################################################## -->
<!-- ###################################################################################### -->
<!-- # Keypad key 1 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
{for $line=1 to 10}
{if !isset($keys.memory[$line])}
{$keys.memory[$line] = ["device_key_id" => $line, "device_key_type" => "", "device_key_line" => "", "device_key_label" => "", "device_key_value" => ""]}
{/if}
{$row=$keys.memory[$line]}
<item name= "pks.mpk.{$row.device_key_id}.keyMode" > {$key_types[$row.device_key_type]}</item>
<!-- # Account. Account1, Account2, Account3, Account4 -->
<item name= "pks.mpk.{$row.device_key_id}.account" > {if !empty($row.device_key_line)}Account{$row.device_key_line}{/if}</item>
<!-- MPK Display Name -->
<item name= "pks.mpk.{$row.device_key_id}.description" > {$row.device_key_label}</item>
<!-- MPK User ID -->
<!-- extendValue may be used based on MPK mode -->
<item name= "pks.mpk.{$row.device_key_id}.value" > {$row.device_key_value}</item>
{/for}
<!-- <item name="pks.mpk.1.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.1.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.1.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.1.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 2 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.2.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.2.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.2.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.2.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 3 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.3.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.3.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.3.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.3.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 4 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.4.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.4.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.4.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.4.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 5 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.5.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.5.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.5.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.5.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 6 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.6.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.6.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.6.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.6.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 7 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.7.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.7.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.7.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.7.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 8 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.8.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.8.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.8.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.8.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 9 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.9.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.9.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.9.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.9.description"></item> -->
<!-- ###################################################################################### -->
<!-- # Keypad key 0 -->
<!-- ###################################################################################### -->
<!-- # Mode -->
<!-- # None ( - 1), SpeedDial (0), DialDTMF (5), GDSOpenDoor (27) -->
<!-- <item name="pks.mpk.10.keyMode">None</item> -->
<!-- # Account -->
<!-- # Account1, Account2 -->
<!-- <item name="pks.mpk.10.account"></item> -->
<!-- MPK Value -->
<!-- <item name="pks.mpk.10.value"></item> -->
<!-- MPK Label -->
<!-- <item name="pks.mpk.10.description"></item> -->
<!-- ############################################################################## -->
<!-- ## System Settings/Time -->
<!-- ############################################################################## -->
<!-- # Date and Time -->
<!-- # NTP Server -->
{if isset($ntp_server_primary)}
<item name= "dateTime.ntp.server.1" > {$ntp_server_primary}</item>
{else}
<item name= "dateTime.ntp.server.1" > pool.ntp.org</item>
{/if}
<!-- # Secondary NTP Server -->
<!-- # String -->
{if isset($ntp_server_secondary)}
<item name= "dateTime.ntp.server.2" > {$ntp_server_secondary}</item>
{else}
<item name= "dateTime.ntp.server.2" > </item>
{/if}
<!-- # Enable Authenticated NTP -->
<!-- # Yes, No -->
<item name= "dateTime.ntp.enableAuth" > No</item>
<!-- # NTP Update Interval -->
<!-- # String -->
<!-- # Number: 5 - 1440, Default is 1440 -->
<item name= "dateTime.ntp.updateInterval" > 1440</item>
<!-- # Allow DHCP Option 42 to override NTP server. Yes or No -->
<!-- # When set to Yes, it will override the configured NTP server -->
<item name= "dateTime.override.dhcp.allowOption42" > Yes</item>
<!-- # Time Zone -->
<!-- # Web GUI Option Option: TimeZone -->
<!-- # Automatic auto -->
<!-- # GMT - 12:00 (International Date Line West) TAZ+12 -->
<!-- # GMT - 11:00 (Midway Island, Samoa) TAB+11 -->
<!-- # GMT - 10:00 (US Hawaiian Time) HAW10 -->
<!-- # GMT - 9:00 (US Alaska Time) AKST9AKDT -->
<!-- # GMT - 8:00 (US Pacific Time, Los Angeles) PST8PDT -->
<!-- # GMT - 08:00 (Baja California) PST8PDT,M3.2.0,M11.1.0 -->
<!-- # GMT - 07:00 (US Mountain Time, Denver) MST7MDT -->
<!-- # GMT - 07:00 (Mountain Time (Arizona, no DST)) MST7 -->
<!-- # GMT - 07:00 (Chihuahua, La Paz, Mazatlan) MST7MDT,M4.1.0,M10.5.0 -->
<!-- # GMT - 06:00 (Central Time) CST6CDT -->
<!-- # GMT - 06:00 (Central America) CST+6 -->
<!-- # GMT - 06:00 (Guadalajara, Mexico City, Monterrey) CST6CDT,M4.1.0,M10.5.0 -->
<!-- # GMT - 05:00 (Eastern Time) EST5EDT -->
<!-- # GMT - 05:00 (Eastern Time without daylight saving) EST5 -->
<!-- # GMT - 04:30 (Caracas) TZf+4:30 -->
<!-- # GMT - 04:00 (Atlantic Time) AST4ADT -->
<!-- # GMT - 04:00 (Atlantic Time (New Brunswick)) AST4ADT,M3.2.0,M11.1.0 -->
<!-- # GMT - 04:00 (Santiago, Chile) CLT4CLST,M9.1.6/24:00,M4.1.6/24:00 -->
<!-- # GMT - 03:30 (Newfoundland Time) NST+3:30NDT+2:30,M3.2.0/02:00:00,M11.1.0/02:00:00 -->
<!-- # GMT - 03:00 (Greenland) TZK+3 -->
<!-- # GMT - 03:00 (Brazil, Sao Paulo) BRST+3BRDT+2,M11.1.0,M2.3.0 -->
<!-- # GMT - 02:00 (Argentina) UTC+3 -->
<!-- # GMT - 02:00 (Mid - Atlantic) TZL+2 -->
<!-- # GMT - 01:00 (Azores, Cape Verdi Is.) TZM+1 -->
<!-- # GMT (Azores, Portugal) TZM+1TZN+0,M3.4.6/24:00:00,M10.4.0/1:00:00 -->
<!-- # GMT (Edinburgh, Casablanca, Monrovia) TZN+0 -->
<!-- # GMT (London, Great Britain) GMT+0BST - 1,M3.5.0/01:00:00,M10.5.0/02:00:00 -->
<!-- # GMT (Lisbon, Portugal) WET - 0WEST - 1,M3.5.0/01:00:00,M10.5.0/02:00:00 -->
<!-- # GMT (Dublin, Ireland) GMT+0IST - 1,M3.5.0/01:00:00,M10.5.0/02:00:00 -->
<!-- # GMT+01:00 (Paris, Vienna, Warsaw, Roma, Madrid, Prague, Berlin, Budapest, Amsterdam, Belgium) CET - 1CEST - 2,M3.5.0/02:00:00,M10.5.0/03:00:00 -->
<!-- # GMT+02:00 (Cairo, Egypt) TZP - 2 -->
<!-- # GMT+02:00 (Israel) EET - 2EEST - 3,M3.4.5/02:00:00,M10.4.0/02:00:00 -->
<!-- # GMT+02:00 (Helsinki, Athens, Tallinn, Bucharest) EET - 2EEST - 3,M3.5.0/03:00:00,M10.4.0/04:00:00 -->
<!-- # GMT+02:00 (Kyiv, Ukraine) EET - 2EEST,M3.5.0/3,M10.5.0/4 -->
<!-- # GMT+03:00 (Kuwait, Baghdad, Istanbul, Nairobi) TZQ - 3 -->
<!-- # GMT+03:00 (Moscow, Russia) MSK - 3 -->
<!-- # GMT+03:00 (Tehran) IRST - 3:30IRDT - 4:30,M3.3.5/24:00:00,M9.3.0/24:00:00 -->
<!-- # GMT+04:00 (Abu Dhabi, Baku) TZR - 4 -->
<!-- # GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)TZS - 5 -->
<!-- # GMT+05:30 (Chennai, New Delhi, Mumbai) TZT - 5:30 -->
<!-- # GMT+05:45 (Kathmandu) TZU - 5:45 -->
<!-- # GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk) TZV - 6 -->
<!-- # GMT+06:30 (Rangoon) TZW - 6:30 -->
<!-- # GMT+07:00 (Bankok, Hanoi, Krasnoyarsk) TZX - 7 -->
<!-- # GMT+07:00 (Jakarta) WIB - 7 -->
<!-- # GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk) TZY - 8 -->
<!-- # GMT+08:00 (Singapore) SGT - 8 -->
<!-- # GMT+08:00 (Ulaanbaatar, Mongolia) ULAT - 8 -->
<!-- # GMT+08:00 (Perth) WST - 8 -->
<!-- # GMT+09:00 (Japan, Korea, Yakutsk) TZZ - 9 -->
<!-- # GMT+09:30 (Adelaide) CST - 9:30CDT - 10:30,M10.5.0/02:00:00,M3.5.0/03:00:00 -->
<!-- # GMT+09:30 (Darwin) CST - 9:30 -->
<!-- # GMT+10:00 (Guam) TZb - 10 -->
<!-- # GMT+10:00 (Hobart) EST - 10EDT - 11,M10.1.0/02:00:00,M4.1.0/03:00:00 -->
<!-- # GMT+10:00 (Sydney, Melbourne, Canberra) EST - 10EDT - 11,M10.1.0/02:00:00,M4.1.0/03:00:00 -->
<!-- # GMT+10:00 (Brisbane) EST - 10 -->
<!-- # GMT+11:00 (Magadan, Solomon Is., New Caledonia) TZc - 11 -->
<!-- # GMT+12:00 (Auckland, Wellington) NZST - 12NZDT - 13,M9.4.0/02:00:00,M4.1.0/03:00:00 -->
<!-- # GMT+12:00 (Fiji) FJT - 12FJST - 13,M11.2.0/02:00:00,M1.2.0/03:00:00 -->
<!-- # GMT+13:00 (Nuku'alofa) TZe - 13 -->
<!-- # Self - Defined Time Zone customize -->
<!-- # String -->
<!-- # Mandatory -->
2024-09-19 20:39:26 +02:00
{if isset($grandstream_time_zone) }
<item name= "dateTime.timezone" > {$grandstream_time_zone}</item>
2023-08-26 18:50:36 +02:00
{else}
<item name= "dateTime.timezone" > auto</item>
{/if}
<!-- # Allow DHCP Option 2 to Override Time Zone Setting. Yes or No -->
{if isset($grandstream_dhcp_time_zone) & & $grandstream_dhcp_time_zone == 0}
<item name= "dateTime.override.dhcp.allowOption2" > No</item>
{else}
<item name= "dateTime.override.dhcp.allowOption2" > Yes</item>
{/if}
<!-- # Self Defined Time Zone. Max length allowed is 64 characters -->
<!-- # String -->
<!-- # Mandatory -->
<item name= "dateTime.timezone.custom" > MTZ+6MDT+5,M4.1.0,M11.1.0</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Security Settings /Web/SSH Access -->
<!-- ############################################################################## -->
<!-- Enable SSH -->
<!-- Yes, No -->
<item name= "security.ssh" > No</item>
<!-- # HTTP Web Port. Default is 80 -->
<item name= "network.web.port.http" > 80</item>
<!-- # HTTPS Web Port. Default is 443 -->
<item name= "network.web.port.https" > 443</item>
<!-- Web Access Mode -->
<!-- HTTP, HTTPS, Both, Disabled -->
{$wam='Both'}
{if isset($grandstream_web_access_mode)}
{if $grandstream_web_access_mode == 0}{$wam='HTTPS'}{/if}
{if $grandstream_web_access_mode == 1}{$wam='HTTP'}{/if}
{if $grandstream_web_access_mode == 2}{$wam='Disabled'}{/if}
{if $grandstream_web_access_mode == 3}{$wam='Both'}{/if}
{/if}
<item name= "security.webAccessMode" > $wam}</item>
<!-- # Web Access Control. None, Whitelist, or Blacklist -->
<item name= "security.webAccessControl" > None</item>
<!-- # Web Session Timeout(in minutes) -->
<!-- # Number: 2 - 60. Default is 10 -->
<item name= "security.webAccess.session.timeout" > 20</item>
<!-- # Validate Server Certificates. Yes or No -->
<item name= "security.validate.serverCertificate" > No</item>
<!-- # Web/Keypad/Restrict mode Lockout Duration (0 - 60 minutes). Default is 5 -->
<!-- # Number: 0 - 60 -->
<item name= "security.webKeypadRestrictModeLockoutDuration" > 5</item>
<!-- # Web Access Attempt Limit -->
<!-- # Number: 1 - 10. Default is 5 -->
<item name= "security.webAccess.attemptLimit" > 10</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Security Settings / User Info Management -->
<!-- ############################################################################## -->
<!-- # User Password -->
<!-- # String: a - z, A - Z, 0 - 9 -->
<item name= "users.user.password" > {$user_password}</item>
<!-- # Admin Password -->
<!-- # String: a - z, A - Z, 0 - 9 -->
{if isset($admin_password)}
<item name= "users.admin.password" > {$admin_password}</item>
{else}
<item name= "users.admin.password" > {$mac|replace:'-':''}</item>
{/if}
<!-- # Keypad Password -->
<!-- # String: a - z, A - Z, 0 - 9 -->
<!-- <item name="keys.lock.password">123</item> -->
<!-- Enable IVR -->
<!-- Yes, No -->
<item name= "ivr.enable" > Yes</item>
<!-- Enable Basic Settings in IVR -->
<!-- Yes, No -->
<item name= "ivr.basicSettings.enable" > Yes</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Security Settings / Client Certificate -->
<!-- ############################################################################## -->
<!-- Minimum TLS Version -->
<!-- TLS_1_0, TLS_1_1, TLS_1_2 -->
<item name= "security.minimum.TLS.version" > TLS_1_0</item>
<!-- Maximum TLS Version -->
<!-- UNLIMITED, TLS_1_0, TLS_1_1, TLS_1_2 -->
<item name= "security.maximum.TLS.version" > UNLIMITED</item>
<!-- Enable/Disable Weak Cipher Suites -->
<!-- Number: 0 - 5. Default is 0 -->
<item name= "security.cipher.suite.options" > 0</item>
<!-- SIP TLS Certificate -->
<!-- <item name="security.certificate"></item> -->
<!-- SIP TLS Private Key -->
<!-- <item name="security.key"></item> -->
<!-- SIP TLS Private Key Password -->
<!-- <item name="security.password"></item> -->
<!-- Custom Certificate -->
<!-- <item name="security.customcertificate"></item> -->
<!-- ############################################################################## -->
<!-- ## System Settings/Security Settings /Trusted CA Certificates ## -->
<!-- ############################################################################## -->
<!-- Trusted CA Certificates 1 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.1"></item> -->
<!-- Trusted CA Certificates 2 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.2"></item> -->
<!-- Trusted CA Certificates 3 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.3"></item> -->
<!-- Trusted CA Certificates 4 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.4"></item> -->
<!-- Trusted CA Certificates 5 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.5"></item> -->
<!-- Trusted CA Certificates 6 -->
<!-- <item name="trustedCACertificates.trustedCACertificate.6"></item> -->
<!-- # Load CA Certificates. Default Certificates, Custom Certificates, All Certificates -->
<!-- <item name="trustedCACertificates.load">Default Certificates</item> -->
<!-- ############################################################################## -->
<!-- ## System Settings/Preferences /Display Control ## -->
<!-- ############################################################################## -->
<!-- # New Message LED Indicator -->
<!-- blinking, off, solid -->
<item name= "ledControl.mwi" > blinking</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Preferences /Audio Control ## -->
<!-- ############################################################################## -->
<!-- # Speaker Ring Volume -->
<!-- # Number: 0 - 8. Default is 4 -->
{if isset($grandstream_speaker_ring_volume)}
<item name= "audio.volume.ring" > {$grandstream_speaker_ring_volume}</item>
{/if}
<!-- # Handset Sidetone Volume -->
<!-- Number: 0 - 30. Default is 15 -->
<!-- <item name="audio.handset.sidetone.volume">15</item> -->
<!-- # Lock Speaker Volume. No, Ring, Talk, Both -->
<!-- <item name="audio.volume.lock">No</item> -->
<!-- # Enable Warning Tone. Yes or No -->
<item name= "sounds.warning.enable" > Yes</item>
<!-- # Handset TX gain(dB) -->
<!-- 0(0), - 6(1), 6(2), - 5(3), - 4(4), - 3(5), - 2(6), - 1(7), 1(8), 2(9), 3(10), 4(11), 5(12). Default is 0 -->
<item name= "audio.handset.txGain" > 0</item>
<!-- # Enable HAC -->
<!-- Yes, No -->
<item name= "audio.handset.enableHAC" > No</item>
<!-- # Enable Bootup Tone -->
<!-- Yes, No -->
<item name= "sounds.booting.enable" > Yes</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Preferences /Audio Control ## -->
<!-- ############################################################################## -->
<!-- # LED Brightness : Active -->
<!-- # Number: 0 - 10. Default is 10 -->
<item name= "ledControl.brightness.active" > 10</item>
<!-- # LED Brightness : Idle -->
<!-- # Number: 0 - 10. Default is 0 -->
<item name= "ledControl.brightness.idle" > 0</item>
<!-- ############################################################################## -->
<!-- ## System Settings/Preferences /TR - 069 ## -->
<!-- ############################################################################## -->
<!-- # Enable TR - 069 -->
<!-- Yes, No -->
<item name= "tr069.enable" > Yes</item>
<!-- ACS URL -->
<item name= "tr069.url" > https://acs.gdms.cloud</item>
<!-- TR - 069 Username -->
<item name= "tr069.username" > </item>
<!-- TR - 069 Password -->
<item name= "tr069.password" > </item>
<!-- Periodic Inform Enable -->
<!-- Yes, No -->
<item name= "tr069.periodicInform" > Yes</item>
<!-- Periodic Inform Interval (s) -->
<item name= "tr069.periodicInformInterval" > 86400</item>
<!-- Connection Request Username -->
<item name= "tr069.connectionRequestUsername" > {$mac|replace:'-':''|upper}</item>
<!-- Connection Request Password -->
<item name= "tr069.connectionRequestPassword" > {$mac|replace:'-':''|upper}</item>
<!-- Connection Request Port -->
<item name= "tr069.connectionRequestPort" > 7547</item>
<!-- CPE SSL Certificate -->
<item name= "tr069.ssl.certificate" > </item>
<!-- CPE SSL Private Key -->
<item name= "tr069.ssl.privateKey" > </item>
<!-- Start TR - 069 at Random Time -->
<!-- Yes, No -->
<item name= "tr069.randomStart.enable" > No</item>
<!-- ############################################################################## -->
<!-- ## Maintenance/Upgrade and Provisioning / Firmware ## -->
<!-- ############################################################################## -->
<!-- Firmware Upgrade Mode -->
<!-- TFTP, HTTP, HTTPS -->
{if isset($grandstream_firmware_upgrade_protocol) }
<item name= "provisioning.firmware.protocol" > {$grandstream_firmware_upgrade_protocol}</item>
{else}
<item name= "provisioning.firmware.protocol" > HTTP</item>
{/if}
<!-- Firmware Server Path -->
{if isset($grandstream_firmware_path) & & isset($firmware_version)}
<item name= "provisioning.firmware.serverPath" > {$grandstream_firmware_path}/{$firmware_version}</item>
{elseif isset($grandstream_firmware_path)}
<item name= "provisioning.firmware.serverPath" > {$grandstream_firmware_path}</item>
{else}
<item name= "provisioning.firmware.serverPath" > {$domain_name}{$project_path}/app/provision/resources/firmware/</item>
{/if}
<!-- Firmware Server User Name -->
<item name= "provisioning.firmware.username" > </item>
<!-- Firmware Server Password -->
<item name= "provisioning.firmware.password" > </item>
<!-- Firmware File Prefix -->
<item name= "provisioning.firmware.filePrefix" > </item>
<!-- Firmware File Postfix -->
<item name= "provisioning.firmware.filePostfix" > </item>
<!-- ############################################################################## -->
<!-- ## Maintenance/Upgrade and Provisioning / Config File ## -->
<!-- ############################################################################## -->
<!-- Config Upgrade Via -->
<!-- TFTP, HTTP, HTTPS -->
<item name= "provisioning.config.protocol" > HTTPS</item>
<!-- Config Server Path -->
{if $grandstream_config_server_path=="none"}
<item name= "provisioning.config.serverPath" > </item>
{elseif isset($grandstream_config_server_path)}
<item name= "provisioning.config.serverPath" > {$grandstream_config_server_path}</item>
{elseif isset($domain_name)}
<item name= "provisioning.config.serverPath" > {$domain_name}{$project_path}/app/provision</item>
{/if}
<!-- Config Server User Name -->
<item name= "provisioning.config.username" > {$http_auth_username}</item>
<!-- Config Server Password -->
<item name= "provisioning.config.password" > {$http_auth_password}</item>
<!-- # Always Authenticate Before Challenge. Yes or No -->
<item name= "provisioning.alwaysAuthenticateBeforeChallenge" > No</item>
<!-- Config File Prefix -->
<item name= "provisioning.config.filePrefix" > </item>
<!-- Config File Postfix -->
<item name= "provisioning.config.filePostfix" > </item>
<!-- Authenticate Conf File -->
<!-- Yes, No -->
<item name= "provisioning.config.authenticateFile" > No</item>
<!-- XML Config File Password -->
<item name= "provisioning.config.filePassword" > </item>
<!-- ############################################################################## -->
<!-- ## Maintenance/Upgrade and Provisioning / Provision ## -->
<!-- ############################################################################## -->
<!-- Automatic Upgrade -->
<!-- No - No (default), Check Every Day - YesUpgradeHourOfDay, Check Every Week - YesUpgradeDayOfWeek, Check at a Period Time - YesUpgradeMin -->
<item name= "provisioning.auto.mode" > No</item>
<!-- Automatic Upgrade Check Interval (m) -->
<!-- Number: 60 - 5256000. Default value is 10080 -->
<item name= "provisioning.auto.minute" > 10080</item>
<!-- Starting - Ending Hour of the Day (0 - 23) -->
<item name= "provisioning.auto.hour" > 1</item>
<item name= "provisioning.auto.endHour" > </item>
<!-- Day of the Week -->
<!-- 0, 1 (default), 2, 3, 4, 5, 6 -->
<!-- Multiple days example: 0/1/2/3/4 -->
<item name= "provisioning.auto.day" > 1</item>
<!-- # Randomized Automatic Upgrade. No or Yes -->
<item name= "provisioning.auto.randomTime.enable" > No</item>
<!-- # Firmware Upgrade and Provisioning -->
<!-- AlwaysCheck (default), CheckWhenChange, SkipCheck -->
<item name= "provisioning.firmware.checkCondition" > AlwaysCheck</item>
<!-- # Allow DHCP Option 43 and Option 66 to override server. No, Yes, Prefer, fallback when failed. Default is No -->
<!-- # When set to Yes, it will override the configured provision path and method -->
<!-- Allow DHCP Option 43 and Option 66 to Override Server -->
<!-- No, Yes, Fallback -->
{if isset($grandstream_dhcp_option_override)}
{if $grandstream_dhcp_option_override == 0}<item name= "provisioning.override.dhcp.allowCommonOptions" > No</item> {/if}
{if $grandstream_dhcp_option_override == 1}<item name= "provisioning.override.dhcp.allowCommonOptions" > Yes</item> {/if}
{if $grandstream_dhcp_option_override == 2}<item name= "provisioning.override.dhcp.allowCommonOptions" > Fallback</item> {/if}
{else}
<item name= "provisioning.override.dhcp.allowCommonOptions" > Yes</item>
{/if}
<!-- # Allow DHCP Option 120 to Override SIP Server -->
<!-- # No or Yes. -->
{if isset($grandstream_dhcp_option_override_sip_server) & & $grandstream_dhcp_option_override_sip_server == 1}
<item name= "sip.override.dhcp.allowOption120" > Yes</item>
{else}
<item name= "sip.override.dhcp.allowOption120" > No</item>
{/if}
<!-- # Additional Override DHCP Option. None, Option 150, Option 160. -->
{if isset($grandstream_dhcp_option_additional_override)}
{if $grandstream_dhcp_option_additional_override == 0}<item name= "provisioning.override.dhcp.allowCustomOption" > None</item> {/if}
{if $grandstream_dhcp_option_additional_override == 1}<item name= "provisioning.override.dhcp.allowCustomOption" > Option 150</item> {/if}
{if $grandstream_dhcp_option_additional_override == 2}<item name= "provisioning.override.dhcp.allowCustomOption" > Option 160</item> {/if}
{else}
<item name= "provisioning.override.dhcp.allowCustomOption" > </item>
{/if}
<!-- # Download and Process ALL Available Config Files. No or Yes -->
<item name= "provisioning.config.processAll.enable" > No</item>
<!-- # User Protection. No or Yes -->
<item name= "provisioning.userProtect.enable" > No</item>
<!-- # 3CX Auto Provision. No or Yes. -->
<item name= "provisioning.3cxAutoProvision" > No</item>
<!-- ############################################################################## -->
<!-- ## Maintenance/Upgrade and Provisioning / Advanced Settings ## -->
<!-- ############################################################################## -->
<!-- # Validate Hostname in Certificate. No, Yes. -->
<item name= "provisioning.validateHostnameInCertificate" > No</item>
<!-- # Enable SIP NOTIFY Authentication. No or Yes -->
<!-- Yes, No -->
<item name= "sip.notify.challenge" > Yes</item>
<!-- ############################################################################## -->
<!-- ## Maintenance/System Diagnostics / Syslog ## -->
<!-- ############################################################################## -->
<!-- Syslog Protocol -->
<!-- UDP, SSL_TLS -->
<item name= "maintain.syslog.protocol" > UDP</item>
<!-- Syslog Server -->
<item name= "maintain.syslog.server" > {$grandstream_syslog_server}</item>
<!-- Syslog Level -->
<!-- None, Debug, Info, Warning, Error -->
{$sl='None'}
{if isset($grandstream_syslog_level)}
{if $grandstream_syslog_level == 1}{$sl='Debug'}{/if}
{if $grandstream_syslog_level == 2}{$sl='Info'}{/if}
{if $grandstream_syslog_level == 3}{$sl='Warning'}{/if}
{if $grandstream_syslog_level == 4}{$sl='Error'}{/if}
{/if}
<item name= "maintain.syslog.level" > {$sl}</item>
<!-- Syslog Keyword Filter -->
<item name= "maintain.syslog.keywordFiltering" > </item>
<!-- # Send SIP Log. No - Do not send SIP log in Syslog, Yes - Send SIP log in Syslog if configured and set to DEBUG level. -->
{if isset($grandstream_send_sip_log) & & $grandstream_send_sip_log==1}
<item name= "maintain.syslog.sendSipLog" > Yes</item>
{else}
<item name= "maintain.syslog.sendSipLog" > No</item>
{/if}
<!-- ############################################################################## -->
<!-- ## Maintenance/Outbound Notification / Action URL ## -->
<!-- ############################################################################## -->
<!-- # Setup Completed. -->
<!-- # String -->
<item name= "ons.actionUrl.setupCompleted" > </item>
<!-- # Registered. -->
<!-- # String -->
<item name= "ons.actionUrl.registered" > </item>
<!-- # Unregistered. -->
<!-- # String -->
<item name= "ons.actionUrl.unregistered" > </item>
<!-- # Register failed. -->
<!-- # String -->
<item name= "ons.actionUrl.registerFailed" > </item>
<!-- # Idle to Busy. -->
<!-- # String -->
<item name= "ons.actionUrl.idleToBusy" > </item>
<!-- # Busy to Idle. -->
<!-- # String -->
<item name= "ons.actionUrl.busyToIdle" > </item>
<!-- # Auto Provision Completed. -->
<!-- # String -->
<item name= "ons.actionUrl.autopFinish" > </item>
<!-- # IP Change. -->
<!-- # String -->
<item name= "ons.actionUrl.IPChanged" > </item>
<!-- # Off Hook. -->
<!-- # String -->
<item name= "ons.actionUrl.offHook" > </item>
<!-- # On Hook. -->
<!-- # String -->
<item name= "ons.actionUrl.onHook" > </item>
<!-- # Incoming Call. -->
<!-- # String -->
<item name= "ons.actionUrl.incomingCall" > </item>
<!-- # Outgoing Call -->
<!-- # String -->
<item name= "ons.actionUrl.outgoingCall" > </item>
<!-- # Missed Call -->
<!-- # String -->
<item name= "ons.actionUrl.missedCall" > </item>
<!-- # Established Call -->
<!-- # String -->
<item name= "ons.actionUrl.establishedCall" > </item>
<!-- # Terminated Call -->
<!-- # String -->
<item name= "ons.actionUrl.terminatedCall" > </item>
<!-- # Answered Call -->
<!-- # String -->
<item name= "ons.actionUrl.answerNewInCall" > </item>
<!-- # Blind Transfer -->
<!-- # String -->
<item name= "ons.actionUrl.blindTransfer" > </item>
<!-- # Attended Transfer -->
<!-- # String -->
<item name= "ons.actionUrl.attendedTransfer" > </item>
<!-- # Transfer Completed -->
<!-- # String -->
<item name= "ons.actionUrl.transferFinished" > </item>
<!-- # Transfer failed -->
<!-- # String -->
<item name= "ons.actionUrl.transferFailed" > </item>
<!-- # Hold Call -->
<!-- # String -->
<item name= "ons.actionUrl.holdCall" > </item>
<!-- # UnHold Call -->
<!-- # String -->
<item name= "ons.actionUrl.unholdCall" > </item>
<!-- # Mute Call -->
<!-- # String -->
<item name= "ons.actionUrl.mute" > </item>
<!-- # Unmute Call -->
<!-- # String -->
<item name= "ons.actionUrl.unMute" > </item>
<!-- ############################################################################## -->
<!-- ## Application/Hotel Service ## -->
<!-- ############################################################################## -->
<!-- # Hotel Name -->
<!-- # String -->
<item name= "hotel.name" > </item>
<!-- # Hotel Address -->
<!-- # String -->
<item name= "hotel.contactAddress" > </item>
<!-- # Hotel Phone Number -->
<!-- # String -->
<item name= "hotel.telephone" > </item>
<!-- # Hotel Fax Number -->
<!-- # String -->
<item name= "hotel.fax" > </item>
<!-- # Hotel Room Number -->
<!-- # String -->
<item name= "hotel.room.number" > </item>
<!-- ############################################################################## -->
<!-- ## External Service/E911 Service -->
<!-- ############################################################################## -->
<!-- # Enable 911. Yes or No -->
<item name= "e911.enable" > No</item>
<!-- # HELD Protocol. HTTP or HTTPS -->
<item name= "e911.held.protocol" > HTTP</item>
<!-- # HELD Protocol. 0, 30 - 1440 -->
<item name= "e911.held.syncInterval" > 0</item>
<!-- # Location Server -->
<!-- # String -->
<item name= "e911.held.server.1.address" > </item>
<!-- # Location Server Username -->
<!-- # String -->
<item name= "e911.held.server.1.userId" > </item>
<!-- # Location Server Password -->
<!-- # String -->
<item name= "e911.held.server.1.password" > </item>
<!-- # Secondary Location Server -->
<!-- # String -->
<item name= "e911.held.server.2.address" > </item>
<!-- # Secondary Location Server Username -->
<!-- # String -->
<item name= "e911.held.server.2.userId" > </item>
<!-- # Secondary Location Server Password -->
<!-- # String -->
<item name= "e911.held.server.2.password" > </item>
<!-- # HELD Location Types -->
<!-- # String: geodetic,civic,locationURI -->
<item name= "e911.held.locationType" > </item>
<!-- # HELD Use LLDP Information. Yes or No -->
<item name= "e911.held.lldpInfo" > No</item>
<!-- # HELD NAI. Yes or No -->
<item name= "e911.held.nai" > No</item>
<!-- # HELD Identity 1 -->
<!-- # String -->
<item name= "e911.held.identity.1.name" > </item>
<!-- # HELD Identity 1 Value -->
<!-- # String -->
<item name= "e911.held.identity.1.value" > </item>
<!-- # HELD Identity 2 -->
<!-- # String -->
<item name= "e911.held.identity.2.name" > </item>
<!-- # HELD Identity 2 Value -->
<!-- # String -->
<item name= "e911.held.identity.2.value" > </item>
<!-- # HELD Identity 3 -->
<!-- # String -->
<item name= "e911.held.identity.3.name" > </item>
<!-- # HELD Identity 3 Value -->
<!-- # String -->
<item name= "e911.held.identity.3.value" > </item>
<!-- # HELD Identity 4 -->
<!-- # String -->
<item name= "e911.held.identity.4.name" > </item>
<!-- # HELD Identity 4 Value -->
<!-- # String -->
<item name= "e911.held.identity.4.value" > </item>
<!-- # HELD Identity 5 -->
<!-- # String -->
<item name= "e911.held.identity.5.name" > </item>
<!-- # HELD Identity 5 Value -->
<!-- # String -->
<item name= "e911.held.identity.5.value" > </item>
<!-- # HELD Identity 6 -->
<!-- # String -->
<item name= "e911.held.identity.6.name" > </item>
<!-- # HELD Identity 6 Value -->
<!-- # String -->
<item name= "e911.held.identity.6.value" > </item>
<!-- # HELD Identity 7 -->
<!-- # String -->
<item name= "e911.held.identity.7.name" > </item>
<!-- # HELD Identity 7 Value -->
<!-- # String -->
<item name= "e911.held.identity.7.value" > </item>
<!-- # HELD Identity 8 -->
<!-- # String -->
<item name= "e911.held.identity.8.name" > </item>
<!-- # HELD Identity 8 Value -->
<!-- # String -->
<item name= "e911.held.identity.8.value" > </item>
<!-- # HELD Identity 9 -->
<!-- # String -->
<item name= "e911.held.identity.9.name" > </item>
<!-- # HELD Identity 9 Value -->
<!-- # String -->
<item name= "e911.held.identity.9.value" > </item>
<!-- # HELD Identity 10 -->
<!-- # String -->
<item name= "e911.held.identity.10.name" > </item>
<!-- # HELD Identity 10 Value -->
<!-- # String -->
<item name= "e911.held.identity.10.value" > </item>
<!-- # E911 Emergency Numbers -->
<!-- # String -->
<item name= "e911.emergency" > 911</item>
<!-- # Geolocation - Routing Header. Yes or No -->
<item name= "e911.header.geolocationRouting" > No</item>
<!-- # Priority Header. Yes or No -->
<item name= "e911.header.priority" > No</item>
<!-- ############################################################################## -->
<!-- ## Application/Web Service -->
<!-- ############################################################################## -->
<!-- # Use Auto Location Service. Yes or No -->
<item name= "services.autoLocation.enable" > Yes</item>
<!-- ############################################################################## -->
<!-- ## Application/GDS -->
<!-- ############################################################################## -->
<!-- ############################################################### -->
<!-- # Order 1 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.1.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.1.account" > </item>
<!-- System Identification -->
<item name= "externalService.1.systemId" > </item>
<!-- System Number -->
<item name= "externalService.1.systemNumber" > </item>
<!-- Access Password -->
<item name= "externalService.1.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.1.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 2 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.2.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.2.account" > </item>
<!-- Display Name -->
<item name= "externalService.2.systemId" > </item>
<!-- System Number -->
<item name= "externalService.2.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.2.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.2.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 3 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.3.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.3.account" > </item>
<!-- Display Name -->
<item name= "externalService.3.systemId" > </item>
<!-- System Number -->
<item name= "externalService.3.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.3.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.3.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 4 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.4.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.4.account" > </item>
<!-- Display Name -->
<item name= "externalService.4.systemId" > </item>
<!-- System Number -->
<item name= "externalService.4.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.4.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.4.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 5 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.5.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.5.account" > </item>
<!-- Display Name -->
<item name= "externalService.5.systemId" > </item>
<!-- System Number -->
<item name= "externalService.5.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.5.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.5.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 6 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.6.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.6.account" > </item>
<!-- Display Name -->
<item name= "externalService.6.systemId" > </item>
<!-- System Number -->
<item name= "externalService.6.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.6.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.6.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 7 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.7.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.7.account" > </item>
<!-- Display Name -->
<item name= "externalService.7.systemId" > </item>
<!-- System Number -->
<item name= "externalService.7.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.7.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.7.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 8 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.8.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.8.account" > </item>
<!-- Display Name -->
<item name= "externalService.8.systemId" > </item>
<!-- System Number -->
<item name= "externalService.8.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.8.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.8.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 9 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.9.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.9.account" > </item>
<!-- Display Name -->
<item name= "externalService.9.systemId" > </item>
<!-- System Number -->
<item name= "externalService.9.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.9.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.9.ringtone" > </item>
<!-- ############################################################### -->
<!-- # Order 10 -->
<!-- ############################################################### -->
<!-- Value - added Service - Value - added Service -->
<!-- Service Type -->
<!-- None, GDS. -->
<item name= "externalService.10.type" > None</item>
<!-- # Account -->
<!-- # Account1 - Account2 -->
<item name= "externalService.10.account" > </item>
<!-- Display Name -->
<item name= "externalService.10.systemId" > </item>
<!-- System Number -->
<item name= "externalService.10.systemNumber" > </item>
<!-- Access Password / DTMF Content -->
<item name= "externalService.10.password" > </item>
<!-- System Ringtone -->
<!-- system, ring1.ogg, ring2.ogg, ring3.ogg, ring4.ogg, ring5.ogg,ring6.ogg, doorbell.ogg. -->
<item name= "externalService.10.ringtone" > </item>
<!-- ############################################################################## -->
<!-- ## Application/PNP Service -->
<!-- ############################################################################## -->
<!-- Enable PNP -->
<!-- Yes, No -->
<item name= "provisioning.pnp.enable" > No</item>
<!-- PNP URL -->
<item name= "provisioning.pnp.url" > </item>
<!-- ############################################################################## -->
<!-- ## Application/Account Sharing -->
<!-- ############################################################################## -->
<!-- Enable Account Sharing -->
<!-- Yes, No -->
<item name= "accountSharing.enable" > No</item>
<!-- Role in Account Sharing -->
<!-- host,guest -->
<item name= "accountSharing.role" > guest</item>
<!-- Group Name -->
<item name= "accountSharing.groupName" > AccountSharing</item>
<!-- Group Password -->
<item name= "accountSharing.password" > AccountSharing</item>
<!-- Account -->
<!-- Account1,Account2 -->
<item name= "accountSharing.account" > Account1</item>
<!-- Account Name -->
<item name= "accountSharing.name" > </item>
<!-- Sync Ringing In Group -->
<!-- Yes, No -->
<item name= "accountSharing.accurateRinging.enable" > No</item>
</config>
</gs_provision>
