diff --git a/resources/templates/provision/yealink/t46s/y000000000066.cfg b/resources/templates/provision/yealink/t46s/y000000000066.cfg index 21e39720df..0263d6dc10 100644 --- a/resources/templates/provision/yealink/t46s/y000000000066.cfg +++ b/resources/templates/provision/yealink/t46s/y000000000066.cfg @@ -1,1576 +1,1602 @@ + #!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## ####################################################################################### -## Hostname ## +## Network CDP ## ####################################################################################### -network.dhcp_host_name = +static.network.cdp.enable = +static.network.cdp.packet_interval = -#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = -#Configure the static IP address, submask, gateway and DNS server. -#Require reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -network.primary_dns = {$dns_server_primary} -network.secondary_dns = {$dns_server_secondary} ####################################################################################### -## PPPOE ## +## Network IPv6 ## ####################################################################################### -#Configure the username and password for PPPOE connection. -#Require reboot; -network.pppoe.user = -network.pppoe.password = +static.network.ipv6_static_dns_enable = +static.network.ipv6_icmp_v6.enable = +static.network.ipv6_secondary_dns = +static.network.ipv6_primary_dns = +static.network.ipv6_internet_port.gateway = +static.network.ipv6_internet_port.ip = +static.network.ipv6_internet_port.type = +static.network.ipv6_prefix = ####################################################################################### -## Network Advanced ## +## Network WiFi ## ####################################################################################### -#Configure the duplex mode and the speed of the WAN port. -#0-Auto negotiate (default), 1-Full duplex 10Mbps, 2-Full duplex 100Mbps, 3-Half duplex 10Mbps, 4-Half duplex 100Mbps; -network.internet_port.speed_duplex = -network.pc_port.speed_duplex = +##static.wifi.X.label= +##static.wifi.X.ssid= +##static.wifi.X.priority= +##static.wifi.X.security_mode= +##static.wifi.X.cipher_type= +##static.wifi.X.password= +##static.wifi.X.eap_type= +##static.wifi.X.eap_user_name= +##static.wifi.x.eap_password= +##(X ranges from 1 to 5) +##Only T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G Models support these parameters. + +static.wifi.enable = +static.wifi.1.label = +static.wifi.1.ssid = +static.wifi.1.priority = +static.wifi.1.security_mode = +static.wifi.1.cipher_type = +static.wifi.1.password = +static.wifi.1.eap_type = +static.wifi.1.eap_user_name = +static.wifi.1.eap_password = +static.wifi.show_scan_prompt = -network.pc_port.dhcp_server = 1 -{if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if} ####################################################################################### -## VLAN ## +## Network Internet ## ####################################################################################### -{if isset($yealink_vlan_enable)}network.vlan.internet_port_enable = {$yealink_vlan_enable}{else}network.vlan.internet_port_enable = 0{/if} +static.network.ip_address_mode = +static.network.span_to_pc_port = +static.network.vlan.pc_port_mode = +static.network.static_dns_enable = +static.network.pc_port.enable = +static.network.primary_dns = +static.network.secondary_dns = +static.network.internet_port.gateway = +static.network.internet_port.mask = +static.network.internet_port.ip = +static.network.internet_port.type = -#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. -#Require reboot; -network.vlan.internet_port_vid = {$yealink_vlan_id} - -#Configure the VLAN priority, it ranges from 0 (default) to 7. -#Require reboot; -network.vlan.internet_port_priority = {$yealink_vlan_cos} - -#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.vlan.pc_port_enable = - -#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. -#Require reboot; -network.vlan.pc_port_vid = {$yealink_vlan_pc_id} - -#Configure the VLAN priority, it ranges from 0 (default) to 7. -#Require reboot; -network.vlan.pc_port_priority = {$yealink_vlan_pc_cos} - -#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default); -#Require reboot; -network.vlan.dhcp_enable = - -#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255. -#Multiple options separated by a comma. It supports up to 5 options in all. -#Require reboot; -network.vlan.dhcp_option = ####################################################################################### -## WEB Port ## +## Network Advanced ## ####################################################################################### -#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. -#Require reboot; -network.port.http = -network.port.https = +static.network.dhcp_host_name = +static.network.dhcp.option60type = +static.network.mtu_value = +static.network.qos.audiotos = +static.network.port.min_rtpport = +static.network.port.max_rtpport = +static.network.qos.signaltos = + +static.wui.http_enable = +static.wui.https_enable = +static.network.port.https = +static.network.port.http = + +static.network.pc_port.speed_duplex = +static.network.internet_port.speed_duplex = + + ####################################################################################### -## QOS ## +## Network LLDP ## ####################################################################################### -#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. -#Require reboot; -network.qos.rtptos = +static.network.lldp.enable = +static.network.lldp.packet_interval = + -#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26. -#Require reboot; -network.qos.signaltos = ####################################################################################### -## 802.1X ## +## Network VLAN ## ####################################################################################### -#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2, 4:EAP-TTLS/EAP-MSCHAPv2; -#Require reboot; -network.802_1x.mode = -network.802_1x.identity = -network.802_1x.md5_password = -network.802_1x.root_cert_url = -network.802_1x.client_cert_url = +static.network.vlan.dhcp_enable = +static.network.vlan.dhcp_option = +static.network.vlan.vlan_change.enable = + + +static.network.vlan.pc_port_priority = +static.network.vlan.pc_port_vid = +static.network.vlan.pc_port_enable = + +static.network.vlan.internet_port_priority = +static.network.vlan.internet_port_vid = +static.network.vlan.internet_port_enable = + ####################################################################################### -## VPN ## +## Network VPN ## ####################################################################################### -#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.vpn_enable = +static.network.vpn_enable = +static.openvpn.url = + + ####################################################################################### -## LLDP ## +## Network 802.1x ## ####################################################################################### -#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); -#Require reboot; -network.lldp.enable = +static.network.802_1x.mode = +static.network.802_1x.identity = +static.network.802_1x.md5_password = +static.network.802_1x.client_cert_url = +static.network.802_1x.root_cert_url = +static.network.802_1x.eap_fast_provision_mode = +static.network.802_1x.anonymous_identity = +static.network.802_1x.proxy_eap_logoff.enable = + + +static.auto_provision.custom.protect = +static.auto_provision.custom.sync = +static.auto_provision.custom.sync.path = +static.auto_provision.custom.upload_method = + + -#Configure the interval(in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60. -#Require reboot; -network.lldp.packet_interval = ####################################################################################### -## SNMP ## +## ZERO Touch ## ####################################################################################### -#Enable or disable the SNMP feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.snmp.enable = -network.snmp.port = +static.zero_touch.enable = +static.zero_touch.wait_time = +static.features.hide_zero_touch_url.enable = +static.zero_touch.network_fail_delay_times = +static.zero_touch.network_fail_wait_times = -#Configure the IP address(es) of the trusted SNMP server,multiple IP addresses must be separated by a space. -#Require reboot; -network.snmp.trust_ip = ####################################################################################### -## Span to PC ## +## Autop URL ## ####################################################################################### -#Enable or disable the span from WAN port to PC port feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.span_to_pc_port = +static.auto_provision.server.url = +static.auto_provision.server.username = +static.auto_provision.server.password = + ####################################################################################### -## RTP Port ## +## Autop Weekly ## ####################################################################################### -#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. -#Require reboot; -network.port.max_rtpport = - -#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. -#Require reboot; -network.port.min_rtpport = +static.auto_provision.weekly.enable = +static.auto_provision.weekly.dayofweek = +static.auto_provision.weekly.end_time = +static.auto_provision.weekly.begin_time = +static.auto_provision.weekly_upgrade_interval = ####################################################################################### -## SYSLOG ## +## Autop Repeat ## ####################################################################################### -#Configure the IP address of the syslog server. -#Require reboot; -syslog.server = - -#Configure the syslog level. It ranges from 0 to 6, the default value is 3. -#Require reboot; -syslog.log_level = +static.auto_provision.repeat.enable = +static.auto_provision.repeat.minutes = ####################################################################################### -## Redirect ## +## Autop DHCP ## ####################################################################################### -#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; -redirect.enable = +static.auto_provision.dhcp_option.list_user_options = +static.auto_provision.dhcp_option.enable = ####################################################################################### -## TR069 ## +## Autop Mode ## ####################################################################################### -#The TR069 feature is only applicable to some designated firmware version. -#All settings of TR069 require reboot. -#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; -managementserver.enable = -managementserver.username = -managementserver.password = -managementserver.url = -managementserver.connection_request_username = -managementserver.connection_request_password = -managementserver.periodic_inform_enable = 0 -managementserver.periodic_inform_interval = 60 +static.auto_provision.power_on = + + ####################################################################################### -## Autop Mode ## +## Flexible Autop ## ####################################################################################### -#Configure the auto provision mode; -#0-Disabled , 1-Power on (default); -auto_provision.mode = +static.auto_provision.flexible.end_time = +static.auto_provision.flexible.begin_time = +static.auto_provision.flexible.interval = +static.auto_provision.flexible.enable = ####################################################################################### -## Autop PNP ## +## Autoprovision Other ## ####################################################################################### -#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); -auto_provision.pnp_enable = +static.auto_provision.prompt.enable = +static.auto_provision.attempt_expired_time = +static.auto_provision.attempt_before_failed = +static.network.attempt_expired_time = +static.auto_provision.update_file_mode = +static.auto_provision.retry_delay_after_file_transfer_failed= +static.auto_provision.inactivity_time_expire = +static.auto_provision.dns_resolv_timeout = +static.auto_provision.dns_resolv_nretry = +static.auto_provision.dns_resolv_nosys = +static.auto_provision.user_agent_mac.enable = +static.auto_provision.server.type = +features.action_uri_force_autop = +static.auto_provision.url_wildcard.pn = +static.auto_provision.reboot_force.enable = +static.auto_provision.dhcp_option.option60_value = +static.custom_mac_cfg.url = +static.auto_provision.aes_key_in_file = +static.auto_provision.aes_key_16.mac = +static.auto_provision.aes_key_16.com = +features.custom_version_info = ####################################################################################### -## Autop DHCP ## +## Autop PNP ## ####################################################################################### -#Enable or disable DHCP option mode; 0-Disabled, 1-Enabled (default); -auto_provision.dhcp_option.enable = +static.auto_provision.pnp_enable = + -#Configure the custom DHCP option number. It ranges from 128 to 254. -auto_provision.dhcp_option.list_user_options = ####################################################################################### -## Autop Repeat ## +## Autop Code ## ####################################################################################### -auto_provision.repeat.enable = 0 +##static.autoprovision.X.name +##static.autoprovision.X.code +##static.autoprovision.X.url +##static.autoprovision.X.user +##static.autoprovision.X.password +##static.autoprovision.X.com_aes +##static.autoprovision.X.mac_aes +##Autop Code(X ranges from 1 to 50) + +static.autoprovision.1.name = +static.autoprovision.1.code = +static.autoprovision.1.url = +static.autoprovision.1.user = +static.autoprovision.1.password = +static.autoprovision.1.com_aes = +static.autoprovision.1.mac_aes = + -#Configure the interval (in minutes) for the phone to check new configuration files. It ranges from 1 to 43200, the default value is 1440. -#It is only applicable to "Repeatedly". -auto_provision.repeat.minutes = ####################################################################################### -## Autop Weekly ## +## TR069 ## ####################################################################################### -auto_provision.weekly.enable = 0 -#Configure the day of week for the phone to check new configuration files. The default vaule is 0123456. -#0-Sunday,1-Monday,2-Tuesday,3-Wednesday,4-Thursday,5-Friday,6-Saturday; -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired week is Monday, Tuesday and Wednesday, the value format is 012. -auto_provision.weekly.mask = +static.managementserver.enable = +static.managementserver.username = +static.managementserver.password = +static.managementserver.url = +static.managementserver.periodic_inform_enable = +static.managementserver.periodic_inform_interval = +static.managementserver.connection_request_password = +static.managementserver.connection_request_username = + -#Configure the start time of the day for the phone to check new configuration files. The default value is 00:00. -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired start time of the day is seven forty-five a.m., the value format is 07:45. -auto_provision.weekly.begin_time = -#Configure the end time of the day for the phone to check new configuration files. The default time is 00:00. -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired end time of the day is seven forty-five p.m., the value format is 19:45. -auto_provision.weekly.end_time = ####################################################################################### -## Autop URL ## +## Redirect ## ####################################################################################### -auto_provision.server.url = {$yealink_provision_url} -auto_provision.server.username = {$http_auth_username} -auto_provision.server.password = {$http_auth_password} +static.redirect.user_name = +static.redirect.password = + ####################################################################################### -## Autop Aes Key ## +## Firmware Update ## ####################################################################################### -#Configure AES key (16 characters) for decrypting the common CFG file. -auto_provision.aes_key_16.com = +static.firmware.url = -#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. -auto_provision.aes_key_16.mac = - -custom_mac_cfg.url = - -#Configure the value (manufacturer of the device) of DHCP option 60. The default is yealink -auto_provision.dhcp_option.option60_value = ####################################################################################### -## Autop Code ## +## Confguration ## ####################################################################################### -#This feature allows user to trigger the auto provisioning by pressing a predefined string on the phone. -#Require reboot; -#"X" ranges from 1 to 50 +features.factory_reset_option = +features.reset_by_long_press_enable = +features.factory_pwd_enable = +features.export_cfg_erase_pwd = +static.configuration.url = +static.features.custom_factory_config.enable = +static.custom_factory_configuration.url = -#Configure the auto provisioning name. -#The valid value is a string, the maximum length is 100. -autoprovision.X.name = - - -#Configure the auto provisioning code; -#The valid value is a string, the maximum length is 100. -autoprovision.X.code = - -#Configure the URL of the auto provisioning server. -#The valid value is a string, the maximum length is 511. -autoprovision.X.url = - -#Configure the username and password for downloading. -#The valid value is a string, the maximum length is 100. -autoprovision.X.user = -autoprovision.X.password = - -#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. -autoprovision.X.com_aes = -autoprovision.X.mac_aes = ####################################################################################### -## Watch Dog ## +## SYSLOG ## ####################################################################################### -#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); -watch_dog.enable = +static.syslog.enable = +static.syslog.server = +static.syslog.level = +static.syslog.server_port = +static.syslog.transport_type = +static.syslog.facility = +static.syslog.prepend_mac_address.enable = +static.local_log.enable = +static.local_log.level = +static.local_log.max_file_size = +static.syslog.bootlog_upload_wait_time = +static.syslog.ftp.append_limit_mode = +static.syslog.ftp.max_logfile = +static.syslog.ftp.post_mode = +static.syslog.log_upload_period = +static.syslog.log_level = +static.network.promisc_mode.enable = + ####################################################################################### -## SIP Advanced ## +## Log Backup ## ####################################################################################### -#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); -sip.use_23_as_pound = +static.auto_provision.local_log.backup.enable = +static.auto_provision.local_log.backup.path = +static.auto_provision.local_log.backup.upload_period = +static.auto_provision.local_log.backup.append = +static.auto_provision.local_log.backup.bootlog.upload_wait_time= +static.auto_provision.local_log.backup.append.max_file_size = +static.auto_provision.local_log.backup.append.limit_mode= -#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; -sip.rfc2543_hold = {$yealink_rfc2543_hold} -#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); -sip.use_out_bound_in_dialog = - -#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. -sip.reg_surge_prevention = - -#Configures the local SIP port. Integer from 1024 to 65535 -{if isset($yealink_sip_listen_port)}sip.listen_port = {$yealink_sip_listen_port}{else}sip.listen_port = 5060{/if} ####################################################################################### -## Echo Cancellation ## +## User Mode ## ####################################################################################### -#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; -voice.vad = +static.security.var_enable = +static.web_item_level.url = -#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); -voice.cng = - -#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); -voice.echo_cancellation = - -#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. -voice.side_tone= - -#configure the preview call mode; 1-Ignore:the mixed of tone and RTP (default), 2-Force: discard the RTP and play the tone, 3-Skip: skip the tone to play the RTP; -voice.call_preview_mode= ####################################################################################### -## Jitter Buffer ## +## Quick Login ## ####################################################################################### -#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); +wui.quick_login = + + +####################################################################################### +## Security ## +####################################################################################### +static.phone_setting.reserve_certs_enable = +features.relog_offtime = +static.security.default_ssl_method = +static.security.cn_validation = +static.security.dev_cert = +static.security.ca_cert = +static.security.trust_certificates = +static.security.user_password = +static.security.user_name.var = +static.security.user_name.admin = +static.security.user_name.user = +security.tls_cipher_list = + + +####################################################################################### +## Watch Dog ## +####################################################################################### +static.watch_dog.enable = + +####################################################################################### +## Server Certificates ## +####################################################################################### +static.server_certificates.url = +static.server_certificates.delete = + +####################################################################################### +## Trusted Certificates ## +####################################################################################### +static.trusted_certificates.url = +static.trusted_certificates.delete = + + + +####################################################################################### +## Secure Domain List ## +####################################################################################### +wui.secure_domain_list = + + +####################################################################################### +## Encryption ## +####################################################################################### +static.auto_provision.encryption.directory = +static.auto_provision.encryption.call_log = +static.auto_provision.encryption.config = + + + + +####################################################################################### +## Trnasfer ## +####################################################################################### +features.transfer_type= +dialplan.transfer.mode = +transfer.on_hook_trans_enable = +transfer.tran_others_after_conf_enable = +transfer.blind_tran_on_hook_enable = +transfer.semi_attend_tran_enable = +phone_setting.call_appearance.transfer_via_new_linekey= + + +####################################################################################### +## Conference ## +####################################################################################### +features.conference.with_previous_call.enable = +features.local_conf.combine_with_one_press.enable= +phone_setting.call_appearance.conference_via_new_linekey= + + + +####################################################################################### +## Anonymous ## +####################################################################################### +features.anonymous_response_code= + + + +####################################################################################### +## Call Configuration ## +####################################################################################### +phone_setting.incoming_call_when_dialing.priority= +phone_setting.hold_or_swap.mode= +features.play_held_tone.interval= +features.play_held_tone.delay= +features.play_held_tone.enable= +features.play_hold_tone.interval= +features.ignore_incoming_call.enable= +force.voice.ring_vol= +features.mute.autoanswer_mute.enable= +features.play_hold_tone.delay = +phone_setting.end_call_net_disconnect.enable = +features.custom_auto_answer_tone.enable= +default_input_method.dialing= +features.speaker_mode.enable= +features.headset_mode.enable= +features.handset_mode.enable= +features.conference.local.enable = +features.off_hook_answer.enable= +features.caller_name_type_on_dialing= +phone_setting.show_code403= +phone_setting.ring_for_tranfailed= +features.password_dial.length= +features.password_dial.prefix= +features.password_dial.enable= +features.group_listen_in_talking_enable= +phone_setting.call_info_display_method= +phone_setting.called_party_info_display.enable = +features.headset_training= +features.headset_prior= +features.dtmf.replace_tran = +features.dtmf.transfer = +phone_setting.ringing_timeout= +phone_setting.ringback_timeout= +features.hold_trans_delay= +transfer.multi_call_trans_enable = +features.keep_mute.enable= +linekey.1.shortlabel= +features.config_dsskey_length.shorten = +transfer.dsskey_deal_type = +features.auto_linekeys.enable= +phone_setting.call_appearance.calls_per_linekey= +features.linekey_call_with_default_account= + +####################################################################################### +## Custom Softkey ## +####################################################################################### +phone_setting.custom_softkey_enable= +custom_softkey_talking.url= +custom_softkey_ring_back.url= +custom_softkey_dialing.url= +custom_softkey_connecting.url= +custom_softkey_call_in.url= +custom_softkey_call_failed.url= + + +####################################################################################### +## Features Bluetooth ## +####################################################################################### +##Only T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G Models support the parameter. +features.bluetooth_enable= +features.bluetooth_adapter_name= + + +####################################################################################### +## Features USB Record ## +####################################################################################### +##Only T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G Models support the parameter. +features.usb_call_recording.enable = + + +####################################################################################### +## Codec ## +####################################################################################### +voice.g726.aal2.enable= + + +####################################################################################### +## DTMF ## +####################################################################################### +features.dtmf.min_interval= +features.dtmf.volume= +features.dtmf.duration = + +####################################################################################### +## Tones ## +####################################################################################### +voice.tone.autoanswer = +voice.tone.message = +voice.tone.stutter = +voice.tone.info = +voice.tone.dialrecall = +voice.tone.callwaiting = +voice.tone.congestion = +voice.tone.busy = +voice.tone.ring = +voice.tone.dial = +voice.tone.country = +voice.side_tone = +features.partition_tone = +voice.tone.secondary_dial= + +####################################################################################### +## Jitter Buffer ## +####################################################################################### +voice.jib.normal= +voice.jib.max = +voice.jib.min = voice.jib.adaptive = -#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. -voice.jib.min = -voice.jib.max = -voice.jib.normal = +voice.jib.wifi.normal= +voice.jib.wifi.max= +voice.jib.wifi.min= +voice.jib.wifi.adaptive= + +####################################################################################### +## Echo Cancellation ## +####################################################################################### +voice.echo_cancellation = +voice.cng = +voice.vad = + +################################################################ +# SIP Backup Server ## +################################################################ +static.network.dns.ttl_enable = +static.network.dns.last_cache_expired.enable= +static.network.dns.last_cache_expired +static.network.dns.query_timeout = +static.network.dns.retry_times = + +sip.dns_transport_type= +sip.skip_redundant_failover_addr= +sip.switch_server_on_503_response= + + +################################################################ +# SIP Basic Config ## +################################################################ +sip.use_out_bound_in_dialog= +sip.unreg_with_socket_close= +phone_setting.disable_account_without_username.enable= +features.auto_answer.first_call_only= + +################################################################ +# SIP Advanced config ## +################################################################ +sip.request_validation.event= +sip.sdp_early_answer_or_offer= +sip.cid_source.preference= +sip.request_validation.digest.realm= +sip.request_validation.digest.list= +sip.request_validation.source.list= +sip.send_keepalive_by_socket= +sip.reliable_protocol.timerae.enable= +sip.listen_in_peer_localip.enable= +sip.requesturi.e164.addglobalprefix= +sip.trust_ctrl= +sip.mac_in_ua= + +sip.timer_t1= +sip.timer_t2= +sip.timer_t4= + +sip.listen_mode= +sip.listen_port= +sip.tls_listen_port= +sip.tcp_port_random_mode= +sip.escape_characters.enable= +sip.notify_reboot_enable= +sip.send_response_by_request= +sip.disp_incall_to_info= +features.call_invite_format= +phone_setting.early_media.rtp_sniffer.timeout= + + +################################################################ +# NAT&ICE ## +################################################################ +static.sip.nat_turn.enable= +static.sip.nat_turn.username= +static.sip.nat_turn.password= +static.sip.nat_turn.server= +static.sip.nat_turn.port= + +static.sip.nat_stun.enable= +static.sip.nat_stun.server= +static.sip.nat_stun.port= + + +static.ice.enable= +static.network.static_nat.enable= +static.network.static_nat.addr= + +####################################################################################### +## DNS ## +####################################################################################### +dns_cache_a.1.name = +dns_cache_a.1.ip = +dns_cache_a.1.ttl = +dns_cache_srv.1.name = +dns_cache_srv.1.port = +dns_cache_srv.1.priority = +dns_cache_srv.1.target = +dns_cache_srv.1.weight = +dns_cache_srv.1.ttl = +dns_cache_naptr.1.name = +dns_cache_naptr.1.flags = +dns_cache_naptr.1.order = +dns_cache_naptr.1.preference = +dns_cache_naptr.1.replace = +dns_cache_naptr.1.service = +dns_cache_naptr.1.ttl = + +####################################################################################### +## RTP ## +####################################################################################### +features.rtp_symmetric.enable= + + +####################################################################################### +## RTCP-XR ## +####################################################################################### +voice.rtcp.enable= +voice.rtcp_cname= +voice.rtcp_xr.enable= +phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable= +phone_setting.vq_rtcpxr_display_round_trip_delay.enable= +phone_setting.vq_rtcpxr_display_moscq.enable= +phone_setting.vq_rtcpxr_display_moslq.enable = +phone_setting.vq_rtcpxr_display_packets_lost.enable= +phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable= +phone_setting.vq_rtcpxr_display_jitter.enable= +phone_setting.vq_rtcpxr_display_remote_codec.enable= +phone_setting.vq_rtcpxr_display_local_codec.enable= +phone_setting.vq_rtcpxr_display_remote_call_id.enable= +phone_setting.vq_rtcpxr_display_local_call_id.enable= +phone_setting.vq_rtcpxr_display_stop_time.enable= +phone_setting.vq_rtcpxr_display_start_time.enable= +phone_setting.vq_rtcpxr_interval_period= +phone_setting.vq_rtcpxr_delay_threshold_critical= +phone_setting.vq_rtcpxr_delay_threshold_warning= +phone_setting.vq_rtcpxr_moslq_threshold_critical= +phone_setting.vq_rtcpxr_moslq_threshold_warning= +phone_setting.vq_rtcpxr.interval_report.enable= +phone_setting.vq_rtcpxr.states_show_on_gui.enable= +phone_setting.vq_rtcpxr.states_show_on_web.enable= +phone_setting.vq_rtcpxr.session_report.enable= -####################################################################################### -## Tones ## -####################################################################################### -#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. -#voice.tone.country = Custom -voice.tone.country = -voice.tone.dial = -voice.tone.ring = -voice.tone.busy = -voice.tone.congestion = -voice.tone.callwaiting = -voice.tone.dialrecall = -voice.tone.record= -voice.tone.info = -voice.tone.stutter = -voice.tone.message = -voice.tone.autoanswer = - -####################################################################################### -## Volume ## -####################################################################################### -#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. -voice.handfree.spk_vol = -voice.handfree.tone_vol = -voice.handset.spk_vol = -voice.handset.tone_vol = -voice.headset.spk_vol = -voice.headset.tone_vol = -voice.ring_vol= - -####################################################################################### -## WEB HTTP(S) ## -####################################################################################### -wui.https_enable = -wui.http_enable = ####################################################################################### -## Transfer ## +## Contact ## ####################################################################################### -#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; -#0-Disabled, 1-Enabled (default); -transfer.semi_attend_tran_enable = - -#Enable or disable the phone to complete the blind or attended transfer through on-hook; -#0-Disabled,1-Enabled(default); -transfer.blind_tran_on_hook_enable = - -#Enable or disable the conference initiator to transfer the call when hanging up. -#0-Disabled(default),1-Enabled; -transfer.tran_others_after_conf_enable = - -#Enable or disable the phone to complete the blind or attended transfer through on-hook; -#0-Disabled,1-Enabled(default); -transfer.on_hook_trans_enable = - -#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); -transfer.dsskey_deal_type = - -####################################################################################### -## Web Language ## -####################################################################################### -#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. -lang.wui = - -#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. -lang.gui = English - -####################################################################################### -## Time Settings ## -####################################################################################### - -#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. -#The default time zone name is China(Beijing). -#local_time.time_zone = +8 -#local_time.time_zone_name = China(Beijing) -local_time.time_zone = {$yealink_time_zone} -local_time.time_zone_name = {$yealink_time_zone_name} - -#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. -local_time.ntp_server1 = {$ntp_server_primary} -local_time.ntp_server2 = {$ntp_server_secondary} - -#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. -local_time.interval = {$yealink_time_update} - -#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); -local_time.summer_time = {$yealink_dst_enable} +static.directory_setting.url= +super_search.url= -#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; -local_time.dst_time_type = {$yealink_dst_type} +local_contact.data.url= +local_contact.data.delete= -#Configure the start time of DST. The default value is 1/1/0. -#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. -#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. -#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. -local_time.start_time = {$yealink_time_zone_start_time} +##Only T54S/T52S/T48G/T48S/T46G/T46S/T29G Models support the parameter +phone_setting.contact_photo_display.enable= -#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. -local_time.end_time = {$yealink_time_zone_end_time} +phone_setting.incoming_call.horizontal_roll_interval= -#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. -local_time.offset_time = {$yealink_offset_time} +##Only T54S/T52S/T48G/T48S/T46G/T46S/T29G Models support the parameter +local_contact.data_photo_tar.url= +local_contact.photo.url= +local_contact.image.url= -#Configure the time format; 0-12 Hour, 1-24 Hour (default); -local_time.time_format = {$yealink_time_format} +##Only T48G/S Models support the parameter +local_contact.icon_image.url= +local_contact.icon.url= -#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; -local_time.date_format = {$yealink_date_format} - -#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; -local_time.dhcp_time = {$yealink_dhcp_time} - -#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. -local_time.manual_time_enable = 0 ####################################################################################### -## Auto Redial ## +## Remote Phonebook ## ####################################################################################### -#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; -auto_redial.enable = - -#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. -auto_redial.interval = +##remote_phonebook.data.X.url +##remote_phonebook.data.X.name +##(X ranges from 1 to 5) + +remote_phonebook.data.1.url= +remote_phonebook.data.1.name= +features.remote_phonebook.enter_update_enable= +features.remote_phonebook.flash_time= +features.remote_phonebook.enable= +remote_phonebook.display_name= -#Configure the auto redial times. It ranges from 1 to 300. The default value is 10. -auto_redial.times = -####################################################################################### -## Zero Touch ## -####################################################################################### -#Enable or disable the Zero Touch feature; 0-Disabled (default), 1-Enabled; -zero_touch.enable = -#Configure the waiting time (in seconds) before canceling the Zero Touch. It ranges from 0 to 100, the default value is 5. -zero_touch.wait_time = ####################################################################################### -## Push XML ## +## LDAP ## ####################################################################################### -push_xml.server = - -#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; -push_xml.block_in_calling= +ldap.enable= +ldap.user= +ldap.password= +ldap.base= +ldap.port= +ldap.host= +ldap.customize_label= +ldap.incoming_call_special_search.enable= +ldap.tls_mode= +ldap.search_type= +ldap.numb_display_mode= +ldap.ldap_sort= +ldap.call_in_lookup= +ldap.version = +ldap.display_name= +ldap.numb_attr= +ldap.name_attr= +ldap.max_hits= +ldap.number_filter= +ldap.name_filter= +ldap.call_out_lookup= -#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; -push_xml.sip_notify= ####################################################################################### -## Dial Plan ## +## History ## ####################################################################################### -dialplan.area_code.code = -dialplan.area_code.min_len = 1 -dialplan.area_code.max_len = 15 - -#When applying the rule to multiple lines, each line ID separated by a comma. -#e.g. dialplan.area_code.line_id = 1,2,3 -dialplan.area_code.line_id = - -#Configure the block out number. X ranges from 1 to 10. -#dialplan.block_out.number.x = -dialplan.block_out.number.1 = - -#When applying the rule to multiple lines, mutiple lines must be separated by a comma. E.g. 1,2,3. -#dialplan.block_out.line_id.X = 1,2,3 -dialplan.block_out.line_id.1 = - -# X ranges from 1 to 100. -dialplan.dialnow.rule.X = -dialplan.dialnow.line_id.X = - -# X ranges from 1 to 100. -dialplan.replace.prefix.X = -dialplan.replace.replace.X = -dialplan.replace.line_id.X = - -#Configure the dialnow rule. X ranges from 1 to 20. -#dialnow.item.X = Dial-now rule,Line ID -#Dial-now rule: Specify the numbers that need replacing; -#Line ID:Specify the line ID to apply the replace rule,multiple lines must be separated by a comma; -dialnow.item.1 = - -#Configure the replace rule. X ranges from 1 to 20. -#dialplan.item.X = Enabled,Prefix,Replaced,LineID -#Enabled: Enable or disable the replace rule. 0-Disabled, 1-Enabled; Prefix: Specify the numbers that need replacing; -#Replaced: Specify the alternate numbers; -#LineID: Specify the line ID to apply the replace rule,multiple lines ID must be separated by a comma; -dialplan.item.1 = +static.auto_provision.local_calllog.write_delay.terminated= +static.auto_provision.local_calllog.backup.path= +static.auto_provision.local_calllog.backup.enable= +super_search.recent_call= +features.call_out_history_by_off_hook.enable= +features.save_call_history= +features.call_log_show_num= +search_in_dialing.history.enable= +directory_setting.history.enable= +features.save_init_num_to_history.enable= +features.redial_via_local_sip_server.enable= -####################################################################################### -## Remote Phonebook ## -####################################################################################### -#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. -#remote_phonebook.data.X.url = -#remote_phonebook.data.X.name = - -{if isset($yealink_remote_phonebook_1_name) } -remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name} -{else} -remote_phonebook.data.1.name = Users -{/if} -{if isset($yealink_remote_phonebook_1_url) } -remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url} -{else} -remote_phonebook.data.1.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=users -{/if} - -{if isset($yealink_remote_phonebook_2_name) } -remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name} -{else} -remote_phonebook.data.2.name = Groups -{/if} -{if isset($yealink_remote_phonebook_2_url) } -remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url} -{else} -remote_phonebook.data.2.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=groups -{/if} - -{if isset($yealink_remote_phonebook_3_name) } -remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name} -{else} -remote_phonebook.data.3.name = Extensions -{/if} -{if isset($yealink_remote_phonebook_3_url) } -remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url} -{else} -remote_phonebook.data.3.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=extensions -{/if} - -remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name} -remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url} - -remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name} -remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url} - -####################################################################################### -## Network Directory ## -####################################################################################### -directory.update_time_interval = -directory.incoming_call_match_enable = 1 -bw.directory_enable = 0 ####################################################################################### -## LDAP Settings ## +## Contact Backup ## ####################################################################################### -ldap.enable = {$ldap_enable} - -#Configure the search criteria for name and number lookups. -ldap.name_filter = {$ldap_name_filter} -ldap.number_filter = {$ldap_number_filter} +static.auto_provision.local_contact.backup.path = +static.auto_provision.local_contact.backup.enable= -ldap.host = {$ldap_host} -ldap.port = {$ldap_port} - -ldap.base = {$ldap_base} -ldap.user = {$ldap_user} -ldap.password = {$ldap_password} - -#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. -ldap.max_hits = {$ldap_max_hits} - -ldap.name_attr = {$ldap_name_attr} -ldap.numb_attr = {$ldap_numb_attr} -ldap.display_name = {$ldap_display_name} - -#Configure the LDAP version. The valid value is 2 or 3 (default). -ldap.version = {$ldap_version} - -#Conifugre the search delay time. It ranges from 0 to 2000 (default). -ldap.search_delay = - -#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; -ldap.call_in_lookup = {$ldap_call_in_lookup} - -#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; -ldap.ldap_sort = {$ldap_sort} - -#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; -ldap.dial_lookup = {$ldap_dial_lookup} ####################################################################################### -## Features ## +## Contact Other ## ####################################################################################### -#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; -#features.dnd_refuse_code = 480 -features.dnd_refuse_code = - -#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). -features.normal_refuse_code = - -#Configure the delay time (in seconds)of auto answer. The time ranges from 1 to 4, the default value is 1. -features.auto_answer_delay = - -#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); -features.dsskey_blind_tran = - -#Enable or disable the phone to mute the call during an active call; 0-Disabled, 1-Enabled (default); -features.allow_mute = - -features.group_listen_in_talking_enable = - -#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; -features.call_completion_enable = - -#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); -features.direct_ip_call_enable = {$yealink_direct_ip_call_enable} -sip.trust_ctrl = {$yealink_trust_ctrl} - -#It enables or disables the IP phone to display the feature name instead of the feature access code when dialing and in talk;(0-Disabled;1-Enabled) -features.hide_feature_access_codes.enable = {$yealink_hide_feature_access_codes_enable} - -#Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off; -features.power_led_on = 1 - -#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. -features.relog_offtime = - -#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset, 2- Use Headset& Speaker; -features.ringer_device.is_use_headset = - -#Enable or disable to enter the password when long pressing the OK key to reset to factory; 0-Disabled (default), 1-Enabled; -#features.factory_pwd_enable = 1 - -features.idle_talk_power_led_flash_enable = - -#Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled; -features.auto_release_bla_line = - -#It enables or disables the IP phone to display the pop-up message box when it receives a new voice mail. -features.voice_mail_popup.enable = {$yealink_voice_mail_popup_enable} - -#It enables or disables the IP phone to display the pop-up message box when it misses a call. -features.missed_call_popup.enable = {$yealink_missed_call_popup_enable} - - -####################################################################################### -## Features FWD ## -####################################################################################### -#Configure the call forward key mode; 0-Phone mode (default), 1-Custom mode. -features.fwd_mode = - -#0-Disabled , 1-Enabled (default) -features.fwd_diversion_enable = - -####################################################################################### -## Features DND ## -####################################################################################### -#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. -features.dnd_mode = -features.dnd.on_code = *78 -features.dnd.off_code = *79 -features.dnd.emergency_enable = 1 -features.dnd.emergency_authorized_number = - -####################################################################################### -## Features BLF ## -####################################################################################### -#Configure the LED flashing mode of the BLF key (line key). The value is 0(default) or 1. -features.blf_led_mode = {$yealink_blf_led_mode} - -features.blf_list_version = 0 -features.blf_and_callpark_idle_led_enable = 0 - -####################################################################################### -## Features Intercom ## -####################################################################################### -#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); -features.intercom.allow = - -#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; -features.intercom.mute = - -#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); -features.intercom.tone = - -#Enable or disable the phone to barge in an intercom call; 0-Disabled (default), 1-Enabled; -features.intercom.barge = - -####################################################################################### -## Features Hotline ## -####################################################################################### -#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value is 4. -features.hotline_number = -features.hotline_delay = - -####################################################################################### -## Features DTMF ## -####################################################################################### -#Enable or disable the phone to suppress the display of DTMF digits; 0-Disabled (default), 1-Enabled; -features.dtmf.hide = {$yealink_dtmf_hide} - -#Enables or disables the IP phone to display the DTMF digits for a short period before displaying as asterisks; 0-Disabled (default), 1-Enabled; -features.dtmf.hide_delay = - -#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). -features.dtmf.repetition = - -#Configure DTMF sequences. It can be consisted of digits, alphabets, * and #. -features.dtmf.transfer = - -#Enable or disable the phone to send DTMF sequences during a call when pressing the transfer soft key or the TRAN key; 0-Disabled (default), 1-Enabled; -features.dtmf.replace_tran = - -####################################################################################### -## Features Audio Settings ## -####################################################################################### -#Enable or disable the headset prior feature; 0-Disabled (default), 1-Enabled; -features.headset_prior = - -#Enable or disable the dual headset feature; 0-Disabled (default), 1-Enabled; -features.headset_training = +directory.search_type= +directory_setting.local_directory.enable = +directory_setting.local_directory.priority = -features.alert_info_tone = -#Enable or disable the phone to play the warning tone when receiving a vocie mail. 0-Disabled; 1-Enabled(default). -features.voice_mail_tone_enable = +####################################################################################### +## Programablekey ## +####################################################################################### +#programablekey.X.type +#programablekey.X.line +#programablekey.X.value +#programablekey.X.xml_phonebook +#programablekey.X.history_type +#programablekey.X.label(X ranges from 1 to 4) +#programablekey.X.pickup_value +#programablekey.X.extension +##Programablekey X ranges(T48G/T48S/T46G/T46S: X=1-10, 12-14;T42G/T42S/T41P/T41S/T40P/T40G: X=1-10, 13;T29G/T27P/T27G: X=1-14;T23P/T23G/T21(P) E2: 1-10, 14;T19(P) E2: X=1-9, 13, 14;)## -#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. -features.busy_tone_delay = -#Configure the phone whether to send a pound key when pressing double pound keys; 0-Send one pound key (default), 1-Do not send any pound key; -features.send_pound_key = - -#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; -features.pound_key.mode = - -#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); -features.send_key_tone = -features.key_tone = - -#Enable or disable the phone to play a warning tone when there is a held call; 0-Disabled, 1-Enabled (default); -features.play_hold_tone.enable = - -#Configure the interval of playing a warning tone. The default value is 30s. -features.play_hold_tone.delay = - -features.redial_tone = - -#Enable or disable the phone with active accounts to play tones in the dialing interface differently from the phone with no active accounts; 0-Disabled (default), 1-Enbaled; -features.partition_tone = - -#Configure the delay time (in milliseconds) before transfering a call. The default value is 0. -features.hold_trans_delay = - -#Enbale or disable the phone to play a local DTMF tone; 0-Disabled, 1-Enabled (default); -features.play_local_dtmf_tone_enable= - -####################################################################################### -## Features Remote Phonebook ## -####################################################################################### -#Enables or disables the IP phone to query the contact names from the remote phonebook when receiving incoming calls; 0-Disabled (default), 1-Enabled; -features.remote_phonebook.enable = - -#Set the interval (in seconds) for the phone to update the information of the remote phonebook. The default value is 3600. -features.remote_phonebook.flash_time = - -####################################################################################### -## Features Action ## -####################################################################################### -#Specific the address(es) or enters 'any' from which Action URI will be accepted. -#For discontinuous IP addresses, each IP address is separated by comma, for example: 192.168.1.20,10.2.1.30 -#For continuous IP addresses, the format likes *.*.*.* and the '*' stands for the values 0~255. For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0~10.10.255.255. -#If left blank, the IP phone cannot receive or handle any HTTP GET request. -#If set to 'any', the IP phone accepts and handles HTTP GET requests from any IP address. -features.action_uri_limit_ip = - -features.action_uri_reboot_now = 0 - -####################################################################################### -## Features Prefix ## -####################################################################################### -#Enable or disable the phone to encrypt the digits of the dialed number. The encrypted digits are displayed as asterisks on the LCD screen; 0-Disabled (default), 1-Enabled; -features.password_dial.enable = - -#Configure the prefix numbers displayed before the encrypted digits. -features.password_dial.prefix = - -#Configure the length of encrypted digits. -features.password_dial.length = - -####################################################################################### -## Features History ## -####################################################################################### -#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); -features.save_call_history = - -####################################################################################### -## Features Pickup ## -####################################################################################### -#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; -features.pickup.group_pickup_enable = - -features.pickup.group_pickup_code = - -#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; -features.pickup.direct_pickup_enable = - -features.pickup.direct_pickup_code = - -#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; -#0-Disabled (default), 1-Enabled; -features.pickup.blf_visual_enable = -features.pickup.blf_audio_enable = - -####################################################################################### -## Phone Setting ## -####################################################################################### -#Enable or disable the photo display on handset 0 = disable, 1= enable -phone_setting.contact_photo_display.enable = 0 - -#Enable or disable the called party information display 0 = disable 1 = enable -phone_setting.called_party_info_display.enable = 1 - -#Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 - -#Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. -phone_setting.inter_digit_time = - -#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: phone_setting.ring_type = Resource:Ring2.wav -#phone_setting.ring_type = Resource:Ring1.wav -phone_setting.ring_type = -phone_setting.ring_for_tranfailed = - -#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); -phone_setting.is_deal180 = -phone_setting.show_code403 = - -#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. -phone_setting.dialnow_delay = - -#Configure the emergency number, each separated by a comma. The default value is 112,911,110. -phone_setting.emergency.number = {$yealink_emergency_number} - -#Configure the using mode of the headset key. The value is 0 or 1(default). -phone_setting.page_tip = - -#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; -phone_setting.logon_wizard = - -#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; -phone_setting.predial_autodial = 1 - -#Enable or disable customizing the softkey layout; 0-Disabled (default), 1-Enabled; -phone_setting.custom_softkey_enable = - -#Configure the using mode of the headset key. The value is 0 or 1(default). -phone_setting.headsetkey_mode = - -#Enable or disabled mail power led flash. 0-Disabled, 1-Enabled. -phone_setting.mail_power_led_flash_enable = 1 - -#It enables or disables the power indicator LED to flash when the IP phone misses a call. -phone_setting.missed_call_power_led_flash.enable = {$yealink_missed_call_power_led_flash_enable} - -####################################################################################### -## Phone Setting UI ## -####################################################################################### -#Configure the active backlight level. It ranges from 1 to 3, the default value is 2. -#The same level for different phones may result in different backlight intensities. -phone_setting.active_backlight_level = -phone_setting.inactive_backlight_level = 1 - -####################################################################################### -## Phone Setting BLF ## -####################################################################################### -phone_setting.blf_list_enable = 1 -phone_setting.auto_blf_list_enable = 1 - -#Specify the prior of the line keys and EXP keys when automatically configure the blf list 0-Configure the line keys first, 1-Configure the EXP keys first; -phone_setting.blf_list_sequence_type = - -####################################################################################### -## Key Lock ## -####################################################################################### - -#Configure the keypad lock type; 0-Disabled (default), 1-Enable -phone_setting.lock = {$yealink_lock_enable} - -#Configure the unlock password for the phone. The default value is 123. -phone_setting.phone_lock.unlock_pin = {$yealink_lock_pin} - -#Configures the interval (in seconds) to automatically lock the IP phone. It ranges from 0 to 3600, the default value is 0. -phone_setting.phone_lock.lock_time_out = {$yealink_lock_timeout} - -#Configure the keypad lock type;0-All Keys(default), 1-Function Key, 2-Menu Key -phone_setting.phone_lock.lock_key_type = {$yealink_lock_key_type} - -#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s. -phone_setting.backlight_time = {$yealink_backlight_time} - -####################################################################################### -## Wallpaper ## -####################################################################################### -wallpaper_upload.url = {$yealink_t46s_wallpaper} -phone_setting.backgrounds = Config:yealink_t46s_wallpaper.png - -####################################################################################### -## Multicast ## -####################################################################################### -#Configure the codec of multicast paging. -multicast.codec = - -#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default); -#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority. -multicast.receive_priority.enable = - -#Configure the priority of multicast paging calls. It ranges from 0 to 10. -multicast.receive_priority.priority = - -#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10. -multicast.listen_address.X.label = - -#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10. -multicast.listen_address.X.ip_address = - -####################################################################################### -## Super Search ## -####################################################################################### -super_search.recent_call = 1 - -####################################################################################### -## Broadsoft Phonebook ## -####################################################################################### -bw_phonebook.group_enable = 1 -bw_phonebook.personal_enable = 1 -bw_phonebook.group_common_enable = 0 -bw_phonebook.group_common_displayname = -bw_phonebook.enterprise_enable = 0 -bw_phonebook.enterprise_common_enable = 0 -bw_phonebook.enterprise_common_displayname = -bw_phonebook.call_log_enable = 1 -bw_phonebook.server_search_enable = 1 -bw_phonebook.group_displayname = -bw_phonebook.enterprise_displayname = -bw_phonebook.common_displayname = -bw_phonebook.personal_displayname = - -####################################################################################### -## Broadsoft ## -####################################################################################### -#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; -#0-Disabled (default), 1-Enabled; -#Require reboot; -bw.calllog_and_dir = - -#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; -bw.feature_key_sync = 0 - -####################################################################################### -## Security ## -####################################################################################### -#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; -#0-Disabled, 1-Enabled (default); -security.trust_certificates = {if $trusted_cert_only == "false"}0{elseif $trusted_cert_only == "true"}1{/if} - -#Define the login username and password of the user, var and administrator. -#If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. -#If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. - -#The following examples change the user's username to "user23" and the user's password to "user23pwd". -#security.user_name.user = user23 -#security.user_password = user23:user23pwd -#The following examples change the var's username to "var55" and the var's password to "var55pwd". -{if isset($user_name) } -security.user_name.user = {$user_name} -security.user_password = {$user_name}:{$user_password} -{/if} -{if isset($admin_name) } -security.user_name.admin = {$admin_name} -security.user_password = {$admin_name}:{$admin_password} -{/if} -{if isset($var_name) } -security.user_name.var = {$var_name} -security.user_password = {$var_name}:{$var_password} -{/if} - -#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; -#Require reboot; -security.var_enable = -security.ca_cert = -security.dev_cert = -security.cn_validation = - - -####################################################################################### -## Linekey ## -####################################################################################### -#The x of the parameter "linekey.x.line" ranges from 1 to 27. -#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. -#linekey.x.lable--Define the label for each line key. +programablekey.1.type = +programablekey.1.label = +programablekey.1.value = +programablekey.1.line = +programablekey.1.history_type = +programablekey.1.xml_phonebook = +programablekey.1.pickup_value = +programablekey.1.extension = -#Configure Line Key1 +####################################################################################### +## Linekey ## +####################################################################################### +##linekey.X.line +##linekey.X.value +##linekey.X.pickup_value +##linekey.X.extension +##linekey.X.type +##linekey.X.xml_phonebook +##linekey.X.shortlabel +##linekey.X.label +##LineKeyX ranges(T48G/S: X ranges from 1 to 29. T54S/T46G/T46S/T29G: X ranges from 1 to 27. T42G/T42S/T41P/T41S: X ranges from 1 to 15. T40P/T40G/T23P/T23G: X ranges from 1 to 3. T52S/T27P/T27G: X ranges from 1 to 21. T21(P) E2: X ranges from 1 to 2.)## +## Not support T19P_E2 + +linekey.1.label = linekey.1.line = linekey.1.value = +linekey.1.pickup_value = linekey.1.extension = linekey.1.type = -linekey.1.label = linekey.1.xml_phonebook = -#Configure Line Key2 -linekey.2.line = -linekey.2.value = -linekey.2.extension = -linekey.2.type = -linekey.2.label = -linekey.2.xml_phonebook = +####################################################################################### +## Dsskey ## +####################################################################################### +features.block_linekey_in_menu.enable = +features.shorten_linekey_label.enable = +features.flash_url_dsskey_led.enable = +features.config_dsskey_length = +phone_setting.page_tip = +features.keep_switch_page_key.enable= -linekey.3.line = -linekey.3.value = -linekey.3.extension = -linekey.3.type = -linekey.3.label = -linekey.3.xml_phonebook = +##phone_setting.idle_dsskey_and_title.transparency(Only support T54S/T52S/T48G/T48S) +phone_setting.idle_dsskey_and_title.transparency= -linekey.4.line = -linekey.4.value = -linekey.4.extension = -linekey.4.type = -linekey.4.label = -linekey.4.xml_phonebook = -linekey.5.line = -linekey.5.value = -linekey.5.extension = -linekey.5.type = -linekey.5.label = -linekey.5.xml_phonebook = -linekey.6.line = -linekey.6.value = -linekey.6.extension = -linekey.6.type = -linekey.6.label = -linekey.6.xml_phonebook = +####################################################################################### +## Expansion Key ## +####################################################################################### +##expansion_module.X.key.Y.type +##expansion_module.X.key.Y.line +##expansion_module.X.key.Y.value +##expansion_module.X.key.Y.pickup_value +##expansion_module.X.key.Y.extension +##expansion_module.X.key.Y.label +##expansion_module.X.key.Y.xml_phonebook +## Expansion Key X ranges(SIP-T54S/T52S: X ranges from 1 to 3, Y ranges from 1 to 60; SIP-T48G/T48S/T46G/T46S:X ranges from 1 to 6, Y ranges from 1 to 40; SIP-T29G/T27P/T27G:X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be configured).)## +## Only SIP-T54S/T52S/T48G/T48S/T46G/T46S/T29G/T27P/T27G Models support the parameter. -linekey.7.line = -linekey.7.value = -linekey.7.extension = -linekey.7.type = -linekey.7.label = -linekey.7.xml_phonebook = - -linekey.8.line = -linekey.8.value = -linekey.8.extension = -linekey.8.type = -linekey.8.label = -linekey.8.xml_phonebook = - -linekey.9.line = -linekey.9.value = -linekey.9.extension = -linekey.9.type = -linekey.9.label = -linekey.9.xml_phonebook = - -linekey.10.line = -linekey.10.value = -linekey.10.extension = -linekey.10.type = -linekey.10.label = -linekey.10.xml_phonebook = - -linekey.11.line = -linekey.11.value = -linekey.11.extension = -linekey.11.type = -linekey.11.label = -linekey.11.xml_phonebook = - -linekey.12.line = -linekey.12.value = -linekey.12.extension = -linekey.12.type = -linekey.12.label = -linekey.12.xml_phonebook = - -linekey.13.line = -linekey.13.value = -linekey.13.extension = -linekey.13.type = -linekey.13.label = -linekey.13.xml_phonebook = - -linekey.14.line = -linekey.14.value = -linekey.14.extension = -linekey.14.type = -linekey.14.label = -linekey.14.xml_phonebook = - -linekey.15.line = -linekey.15.value = -linekey.15.extension = -linekey.15.type = -linekey.15.xml_phonebook = -linekey.15.label = - -linekey.16.line = -linekey.16.value = -linekey.16.extension = -linekey.16.type = -linekey.16.xml_phonebook = -linekey.16.label = - -linekey.17.line = -linekey.17.value = -linekey.17.extension = -linekey.17.type = -linekey.17.xml_phonebook = -linekey.17.label = - -linekey.18.line = -linekey.18.value = -linekey.18.extension = -linekey.18.type = -linekey.18.xml_phonebook = -linekey.18.label = - -linekey.19.line = -linekey.19.value = -linekey.19.extension = -linekey.19.type = -linekey.19.xml_phonebook = -linekey.19.label = - -linekey.20.line = -linekey.20.value = -linekey.20.extension = -linekey.20.type = -linekey.20.xml_phonebook = -linekey.20.label = - -linekey.21.line = -linekey.21.value = -linekey.21.extension = -linekey.21.type = -linekey.21.xml_phonebook = -linekey.21.label = - -linekey.22.line = -linekey.22.value = -linekey.22.extension = -linekey.22.type = -linekey.22.xml_phonebook = -linekey.22.label = - -linekey.23.line = -linekey.23.value = -linekey.23.extension = -linekey.23.type = -linekey.23.xml_phonebook = -linekey.23.label = - -linekey.24.line = -linekey.24.value = -linekey.24.extension = -linekey.24.type = -linekey.24.xml_phonebook = -linekey.24.label = - -linekey.25.line = -linekey.25.value = -linekey.25.extension = -linekey.25.type = -linekey.25.xml_phonebook = -linekey.25.label = - -linekey.26.line = -linekey.26.value = -linekey.26.extension = -linekey.26.type = -linekey.26.xml_phonebook = -linekey.26.label = - -linekey.27.line = -linekey.27.value = -linekey.27.extension = -linekey.27.type = -linekey.27.xml_phonebook = -linekey.27.label = -####################################################################################### -## Programablekey ## -####################################################################################### -#X ranges from 1 to 13. -#programablekey.x.type--Customize the programmable key type. -#The valid types are: -#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Direct Pickup 13-Spead Dial -#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 31-Switch Account 32-New SMS -#33-Status 40-PTT 43-Local Phonebook 44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 50-Keypad Lock -#PTT-add a specified prefix number before the dialed number. -#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. -#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. -#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. - -#programablekey.x.value = -#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. -#programablekey.x.history_type = - -#programablekey.x.label--This parameter is only available to the key 1 to key 4. -#programablekey.1.type = -#programablekey.1.line = -#programablekey.1.value = -#programablekey.1.xml_phonebook = -#programablekey.1.history_type = -#programablekey.1.label = -#programablekey.1.pickup_value = - -########################################################################################## -## Expansion Key ## -########################################################################################## -#X ranges from 1 to 16, Y ranges from 1 to 40. -#expansion_module.x.key.y.type = 37 (Switch by default) -#expansion_module.x.key.y.line = 0 -#expansion_module.x.key.y.value = -#expansion_module.x.key.y.pickup_value = -#expansion_module.x.key.y.label = -#expansion_module.X.key.Y.xml_phonebook = - -#Each expansion module1 key1 expansion_module.1.key.1.type = -expansion_module.1.key.1.line = -expansion_module.1.key.1.value = -expansion_module.1.key.1.pickup_value = expansion_module.1.key.1.label = +expansion_module.1.key.1.value = +expansion_module.1.key.1.line = +expansion_module.1.key.1.pickup_value = +expansion_module.1.key.1.extension = expansion_module.1.key.1.xml_phonebook = +expansion_module.page_tip.blf_call_in.led = +expansion_module.page_tip.blf_call_in.enable = -#Each expansion module1 key2 -expansion_module.1.key.2.type = -expansion_module.1.key.2.line = -expansion_module.1.key.2.value = -expansion_module.1.key.2.pickup_value = -expansion_module.1.key.2.label = -expansion_module.1.key.2.xml_phonebook = -#Each expansion module2 key1 -expansion_module.2.key.1.type = -expansion_module.2.key.1.line = -expansion_module.2.key.1.value = -expansion_module.2.key.1.pickup_value = -expansion_module.2.key.1.label = -expansion_module.2.key.1.xml_phonebook = -####################################################################################### -## Forward Always ## -####################################################################################### -#Enable or disable the always forward feature; 0-Disabled (default), 1-Enabled; -forward.always.enable = -forward.always.target = -forward.always.on_code = -forward.always.off_code = -####################################################################################### -## Forward Busy ## -####################################################################################### -#Enable or disable the busy forward feature; 0-Disabled (default), 1-Enabled; -forward.busy.enable = -forward.busy.target = -forward.busy.on_code = -forward.busy.off_code = +####################################################################################### +## EDK ## +####################################################################################### +##EDK Soft Keys(X ranges from 1 to 10) -####################################################################################### -## Forward No Answer ## -####################################################################################### -#Enable or disable the no answer forward feature; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -forward.no_answer.enable = -forward.no_answer.target = -forward.no_answer.timeout = -forward.no_answer.on_code = -forward.no_answer.off_code = +features.enhanced_dss_keys.enable= +edk.id_mode.enable= +softkey.1.position= +softkey.1.use.dialing= +softkey.1.softkey_id= +softkey.1.use.dialtone= +softkey.1.use.conferenced= +softkey.1.use.held= +softkey.1.use.hold= +softkey.1.use.transfer_ring_back= +softkey.1.use.ring_back= +softkey.1.use.call_failed= +softkey.1.use.on_talk= +softkey.1.use.transfer_connecting= +softkey.1.use.connecting= +softkey.1.use.incoming_call= +softkey.1.use.idle= +softkey.1.action= +softkey.1.label= +softkey.1.enable= +edk.edklist.1.action= +edk.edklist.1.mname= +edk.edklist.1.enable= +edk.edkprompt.1.enable= +edk.edkprompt.1.label= +edk.edkprompt.1.type= +edk.edkprompt.1.userfeedback= -####################################################################################### -## Forward International ## -####################################################################################### -#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; -forward.international.enable = -####################################################################################### -## ACD ## -####################################################################################### -#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; -acd.auto_available = -#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. -acd.auto_available_timer = -acd.bw = +####################################################################################### +## XML ## +####################################################################################### +push_xml.server= +push_xml.sip_notify= +push_xml.block_in_calling= +default_input_method.xml_browser_input_screen= -####################################################################################### -## Hotdesking Startup ## -####################################################################################### -#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; -#hotdesking.startup_register_name_enable = 1 (default) -#hotdesking.startup_username_enable = 1 (default) -#hotdesking.startup_password_enable = 0 (default) -#hotdesking.startup_sip_server_enable = 0 (default) -#hotdesking.startup_outbound_enable = 0 (default) -hotdesking.startup_register_name_enable = -hotdesking.startup_username_enable = -hotdesking.startup_password_enable = -hotdesking.startup_sip_server_enable = -hotdesking.startup_outbound_enable = +####################################################################################### +## Forward ## +####################################################################################### +features.fwd.allow= +features.fwd_mode= +forward.no_answer.enable= +forward.busy.enable= +forward.always.enable= +forward.no_answer.timeout= +forward.no_answer.on_code= +forward.no_answer.off_code= +forward.busy.off_code= +forward.busy.on_code= +forward.always.off_code= +forward.always.on_code= +forward.no_answer.target= +forward.busy.target= +forward.always.target= -####################################################################################### -## Hotdesking Dsskey ## -####################################################################################### -#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; -#0-Disabled, 1-Enabled; -#hotdesking.dsskey_register_name_enable = 1 (default) -#hotdesking.dsskey_username_enable = 1 (default) -#hotdesking.dsskey_password_enable = 0 (default) -#hotdesking.dsskey_sip_server_enable = 0 (default) -#hotdesking.dsskey_outbound_enable = 0 (default) +features.forward.emergency.authorized_number= +features.forward.emergency.enable= +forward.idle_access_always_fwd.enable= +features.forward_call_popup.enable= -hotdesking.dsskey_register_name_enable = -hotdesking.dsskey_username_enable = -hotdesking.dsskey_password_enable = -hotdesking.dsskey_sip_server_enable = -hotdesking.dsskey_outbound_enable = -####################################################################################### -## Alert Info ## -####################################################################################### -#"X" ranges from 1 to 10; -#Configure the text to map the keywords contained in the "Alert-info" header. -#distinctive_ring_tones.alert_info.X.text = family -distinctive_ring_tones.alert_info.1.text = -#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. -#1-Ring1.wav, 2-Ring2.wav, 3-Ring3.wav, 4-Ring4.wav, 5-Ring5.wav, 6-Ring6.wav, 7-Ring7.wav, 8-Ring8.wav. -#distinctive_ring_tones.alert_info.X.ringer = 1 -distinctive_ring_tones.alert_info.1.ringer = +####################################################################################### +## DND ## +####################################################################################### +features.dnd.allow= +features.dnd_mode= +features.dnd.enable= -####################################################################################### -## Call Waiting ## -####################################################################################### -#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); -call_waiting.enable = {$yealink_call_waiting} -#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); -call_waiting.tone = +features.dnd.off_code= +features.dnd.on_code= -call_waiting.on_code = -call_waiting.off_code = +features.dnd.emergency_authorized_number= +features.dnd.emergency_enable= +features.dnd.large_icon.enable= -####################################################################################### -## Call Park ## -####################################################################################### -call_park.enable = 0 -call_park.group_enable = 0 -call_park.park_ring = -call_park.park_visual_notify_enable = +####################################################################################### +## Phone Lock ## ####################################################################################### -## Action URL ## -####################################################################################### -#action_url.setup_completed--Inform the server that the phone has completed the startup. -#action_url.dnd_on-- Inform the server that the DND is activated on the phone. -#The value format is: http://IP address of server/help.xml?variable name=variable value. -#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. -#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. -#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. -#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. -#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. -#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. -#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. -#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. -#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. -#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac +phone_setting.phone_lock.enable= +phone_setting.phone_lock.lock_key_type= +phone_setting.phone_lock.unlock_pin= +phone_setting.emergency.number= +phone_setting.phone_lock.lock_time_out= -action_url.setup_completed = -action_url.log_on = -action_url.log_off = -action_url.register_failed = + + +####################################################################################### +## Hotdesking ## +####################################################################################### +phone_setting.logon_wizard= +phone_setting.logon_wizard_forever_wait= + +hotdesking.startup_register_name_enable= +hotdesking.startup_username_enable= +hotdesking.startup_password_enable= +hotdesking.startup_sip_server_enable= +hotdesking.startup_outbound_enable= + +hotdesking.dsskey_register_name_enable= +hotdesking.dsskey_username_enable= +hotdesking.dsskey_password_enable= +hotdesking.dsskey_sip_server_enable= +hotdesking.dsskey_outbound_enable= + + +####################################################################################### +## Voice Mail ## +####################################################################################### +features.voice_mail_alert.enable= +features.voice_mail_popup.enable= +features.voice_mail_tone_enable= +features.hide_feature_access_codes.enable= +voice_mail.number.1= + + + +####################################################################################### +## Text Message ## +####################################################################################### +features.text_message.enable= +features.text_message_popup.enable= + + + + +####################################################################################### +## UME ## +####################################################################################### +action_url.is_ume= + + +####################################################################################### +## Audio Intercom ## +####################################################################################### +features.intercom.mode= +features.intercom.subscribe.enable= +features.intercom.led.enable= +features.intercom.feature_access_code= +features.blf.intercom_mode.enable= +features.intercom.ptt_mode.enable= + +features.redial_tone= +features.key_tone= +features.send_key_tone= + +features.intercom.allow= +features.intercom.barge= +features.intercom.tone= +features.intercom.mute= + + +voice.handset_send= +voice.handfree_send = +voice.headset_send = +features.intercom.headset_prior.enable= +features.ringer_device.is_use_headset= + + + + +####################################################################################### +## Feature General ## +####################################################################################### +features.ip_call.auto_answer.enable= +features.show_default_account= +features.call.dialtone_time_out= +features.missed_call_popup.enable= +features.auto_answer_tone.enable= +features.play_hold_tone.enable= +features.key_as_send= +features.send_pound_key= +features.busy_tone_delay= +features.hotline_delay= +features.hotline_number= +features.direct_ip_call_enable= +features.call_num_filter= +features.call_completion_enable= +features.allow_mute= +features.auto_answer_delay= +features.normal_refuse_code= +features.dnd_refuse_code= +features.upload_server= +features.dtmf.repetition= +features.dtmf.hide_delay= +features.dtmf.hide= +features.play_local_dtmf_tone_enable = +features.reboot_in_talk_enable = +features.fwd_diversion_enable= + +call_waiting.enable= +call_waiting.tone= +call_waiting.off_code= +call_waiting.on_code= + +auto_redial.times= +auto_redial.interval= +auto_redial.enable= + + +sip.rfc2543_hold= +sip.use_23_as_pound= +forward.international.enable= +phone_setting.headsetkey_mode= +phone_setting.is_deal180= +phone_setting.change_183_to_180= + +####################################################################################### +## Action URL&URI ## +####################################################################################### +features.csta_control.enable= +features.action_uri.enable= +features.action_uri_limit_ip= +features.show_action_uri_option= +action_url.call_remote_canceled= +action_url.remote_busy= +action_url.cancel_callout= +action_url.handfree= +action_url.headset= +action_url.unheld= +action_url.held= +action_url.transfer_failed= +action_url.transfer_finished= +action_url.answer_new_incoming_call= +action_url.reject_incoming_call= +action_url.forward_incoming_call= +action_url.ip_change= +action_url.idle_to_busy= +action_url.busy_to_idle= +action_url.call_terminated= +action_url.missed_call= +action_url.unmute= +action_url.mute= +action_url.unhold= +action_url.hold= +action_url.always_fwd_off = +action_url.always_fwd_on = +action_url.attended_transfer_call = +action_url.blind_transfer_call = +action_url.busy_fwd_off = +action_url.busy_fwd_on = +action_url.call_established = +action_url.call_waiting_off = +action_url.call_waiting_on = +action_url.dnd_off = +action_url.dnd_on = +action_url.incoming_call = +action_url.no_answer_fwd_off = +action_url.no_answer_fwd_on = action_url.off_hook = action_url.on_hook = -action_url.incoming_call = action_url.outgoing_call = -action_url.call_established = -action_url.dnd_on = -action_url.dnd_off = -action_url.always_fwd_on = -action_url.always_fwd_off = -action_url.busy_fwd_on = -action_url.busy_fwd_off = -action_url.no_answer_fwd_on = -action_url.no_answer_fwd_off = +action_url.register_failed = +action_url.registered = +action_url.setup_autop_finish = +action_url.setup_completed = action_url.transfer_call = -action_url.blind_transfer_call = -action_url.attended_transfer_call = -action_url.hold = -action_url.unhold = -action_url.mute = -action_url.unmute = -action_url.missed_call = -action_url.call_terminated = -action_url.busy_to_idle = -action_url.idle_to_busy = -action_url.ip_change = -action_url.forward_incoming_call = -action_url.reject_incoming_call = -action_url.answer_new_incoming_call = -action_url.transfer_finished = -action_url.transfer_failed = +action_url.unregistered = + + + +####################################################################################### +## Power LED ## +####################################################################################### +phone_setting.hold_and_held_power_led_flash_enable= +phone_setting.mute_power_led_flash_enable= +phone_setting.talk_and_dial_power_led_enable= +phone_setting.mail_power_led_flash_enable= +phone_setting.ring_power_led_flash_enable= +phone_setting.common_power_led_enable= +phone_setting.missed_call_power_led_flash.enable= + ####################################################################################### -## Ringtone ## -####################################################################################### -#Before using this parameter, you should store the desired ring tone (x.wav) to the provisioning server. -#For more information, refer to Yealink Auto Provisioning User Guide. -ringtone.url = - -#ringtone.delete = http://localhost/all,delete all the customized ring tones. -ringtone.delete = - -####################################################################################### -## UI Language ## -####################################################################################### -#Before using this parameter, you should store the desired language pack to the provisioning server. -#For more information, refer to Yealink Auto Provisioning User Guide. -gui_lang.url = - -#gui_lang.delete = http://localhost/all, delete all the customized languages. -gui_lang.delete = - -####################################################################################### -## Trusted Certificates ## -####################################################################################### -#Before using this parameter, you should store the desired certificate to the provisioning server. -trusted_certificates.url = - -#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. -trusted_certificates.delete = - -####################################################################################### -## Server Certificates ## -####################################################################################### -#Before using this parameter, you should store the desired certificate to the provisioning server. -server_certificates.url = - -#server_certificates.delete = http://localhost/all, delete the server certificate. -server_certificates.delete = - -####################################################################################### -## Contact ## -####################################################################################### -#Before using these parameters, you should store the desired resource files to the provisioning server. -#For more information, refer to Yealink SIP-T46S IP Phone Family Administrator Guide. -local_contact.data.url = - -####################################################################################### -## Auto DST ## +## Time&Date ## ####################################################################################### +lcl.datetime.date.format = auto_dst.url = +local_time.manual_time_enable = +local_time.manual_ntp_srv_prior = +local_time.time_format = +local_time.date_format = +local_time.dhcp_time = + +local_time.summer_time = +local_time.dst_time_type = +local_time.start_time = +local_time.end_time = +local_time.offset_time = +local_time.interval = + +local_time.ntp_server1 = +local_time.ntp_server2 = +local_time.time_zone = +local_time.time_zone_name = + + ####################################################################################### -## Dialplan Now ## +## Multicast Paging ## ####################################################################################### -dialplan_dialnow.url = +##multicast.listen_address.X.label +##multicast.paging_address.X.channel +##multicast.listen_address.X.ip_address +##multicast.paging_address.X.ip_address +##multicast.paging_address.X.label +##multicast.listen_address.X.channel +##multicast.listen_address.X.volume +##Multicast(X ranges from 1 to 31.) + +multicast.codec= + +multicast.paging_address.1.channel= +multicast.paging_address.1.label= +multicast.paging_address.1.ip_address= +multicast.receive_priority.enable= +multicast.receive_priority.priority= + +multicast.receive.use_speaker= +multicast.receive.enhance_volume= +multicast.receive.ignore_dnd.priority= + +multicast.listen_address.1.channel= +multicast.listen_address.1.label= +multicast.listen_address.1.ip_address= +multicast.listen_address.1.volume= + ####################################################################################### -## Dialplan Replace ## +## Preference&Status ## ####################################################################################### -dialplan_replace_rule.url = +##Not support T19P_E2 +static.features.default_account= + +##Logo File Format: .dob +##Resolution: SIP-T42G/T42S/T41P/T41S: <=192*64 2 gray scale;SIP-T27P/G: <=240*120 2 gray scale;SIP-T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2: <=132*64 2 gray scale## +phone_setting.lcd_logo.mode= +lcd_logo.delete= +lcd_logo.url= +phone_setting.lcd_logo.mode= + +phone_setting.contrast= +phone_setting.backlight_time= +phone_setting.inactive_backlight_level= +phone_setting.active_backlight_level= +phone_setting.predial_autodial= + +ringtone.url= +ringtone.delete= +phone_setting.ring_type= +phone_setting.inter_digit_time= + +##Only T54S Model supports the parameter +phone_setting.idle_clock_display.enable = ####################################################################################### -## Custom Factory Configuration ## +## Digitmap ## ####################################################################################### -#Configure the access URL for downloading the customized factory configurations. -#Before using this parameter, you should store the desired factory configuration file to the provisioning server. -custom_factory_configuration.url = +dialplan.digitmap.enable= +dialplan.digitmap.string= +dialplan.digitmap.no_match_action= +dialplan.digitmap.interdigit_short_timer= +dialplan.digitmap.interdigit_long_timer= +dialplan.digitmap.apply_to.press_send= +dialplan.digitmap.apply_to.forward= +dialplan.digitmap.apply_to.history_dial= +dialplan.digitmap.apply_to.directory_dial= +dialplan.digitmap.apply_to.on_hook_dial= +dialplan.digitmap.active.on_hook_dialing= + + + ####################################################################################### -## Custom Configuration ## +## Emergency Dialplan ## ####################################################################################### -#Configure the access URL for downloading the configurations. -#Before using this parameter, you should store the desired configuration file to the provisioning server. -configuration.url = +dialplan.emergency.enable= +dialplan.emergency.1.value= +dialplan.emergency.server.1.address= +dialplan.emergency.server.1.transport_type= +dialplan.emergency.server.1.port= +dialplan.emergency.1.server_priority= +dialplan.emergency.custom_asserted_id= +dialplan.emergency.asserted_id_source= +dialplan.emergency.asserted_id.sip_account= +dialplan.emergency.held.request_element.1.name= +dialplan.emergency.held.request_element.1.value= +dialplan.emergency.held.request_type= +dialplan.emergency.held.server_url= + + ####################################################################################### -## Custom Softkey ## +## Dialplan ## ####################################################################################### -#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. -#Before using these parameters, you should store the desired XML files to the provisioning server. -custom_softkey_call_failed.url = -custom_softkey_call_in.url = -custom_softkey_connecting.url = -custom_softkey_dialing.url = -custom_softkey_ring_back.url = -custom_softkey_talking.url = +dialplan_replace_rule.url= +dialplan.replace.line_id.1= +dialplan.replace.replace.1= +dialplan.replace.prefix.1= +phone_setting.dialnow_delay= +dialplan_dialnow.url= +dialnow.item.1= +dialplan.dialnow.line_id.1= +dialplan.dialnow.rule.1= +dialplan.block_out.line_id.1= +dialplan.block_out.number.1= +dialplan.area_code.line_id = +dialplan.area_code.max_len = +dialplan.area_code.min_len= +dialplan.area_code.code= ####################################################################################### -## Local Contact Photo ## +## Rings Settings ## ####################################################################################### -local_contact.data_photo_tar.url = +distinctive_ring_tones.alert_info.1.ringer= +distinctive_ring_tones.alert_info.1.text= ####################################################################################### -## Call List ## +## IME Settings ## ####################################################################################### -#Configure the access URL for downloading the call list. -#Before using this parameter, you should store the desired call list file to the provisioning server. -#Require reboot -call_list.url = +directory.search_default_input_method= +directory.edit_default_input_method= +gui_input_method.url= ####################################################################################### -## Open VPN ## +## Language Settings ## ####################################################################################### -#Configure the access URL for downloading the open VPN tar. -#Before using this parameter, you should store the desired VPN file to the provisioning server -openvpn.url = +wui_lang.url= +wui_lang_note.url= +wui_lang.delete= +gui_input_method.delete= +gui_lang.url= +gui_lang.delete= +static.lang.gui= +static.lang.wui= + ####################################################################################### -## Level ## +## Screensaver ## ####################################################################################### -#Configure the access URL for downloading the files for var. -#Before using this parameter, you should store the desired files to the provisioning server. -#Require reboot -web_item_level.url = +screensaver.type= +screensaver.delete= +screensaver.upload_url= +features.blf_active_backlight.enable= +screensaver.display_clock.enable= +screensaver.clock_move_interval= +screensaver.picture_change_interval= +screensaver.wait_time= +screensaver.xml_browser.url= + + ####################################################################################### -## Super Search URL ## +## Power Saving ## ####################################################################################### -super_search.url = +features.power_saving.enable= +features.power_saving.power_led_flash.on_time= +features.power_saving.power_led_flash.off_time= +features.power_saving.office_hour.monday= +features.power_saving.office_hour.tuesday= +features.power_saving.office_hour.wednesday= +features.power_saving.office_hour.thursday= +features.power_saving.office_hour.friday= +features.power_saving.office_hour.saturday= +features.power_saving.office_hour.sunday = +features.power_saving.user_input_ext.idle_timeout= +features.power_saving.off_hour.idle_timeout= +features.power_saving.office_hour.idle_timeout= +features.power_saving.intelligent_mode= + ####################################################################################### -## Directory Setting ## +## Backgrounds Settings ## ####################################################################################### -#Configure the access URL of the directory setting file. -directory_setting.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=favorite_setting.xml +##File Formate: +##SIP-T54S/T52S/T48S/T48G/T46G/T46S/T29G: .jpg/.png/.bmp/.jpeg; +##Resolution: +##SIP-T48S/T48G:<=2.0 megapixels; +##for SIP-T46G/T46S/T29G: <=1.8 megapixels;SIP-T54S/T52S:<=4.2 megapixels; +##Single File Size: <=5MB +##2MB of space should bereserved for the phone + +wallpaper_upload.url= +phone_setting.backgrounds= + +## phone_setting.backgrounds_with_dsskey_unfold(Only support T48G/S) +phone_setting.backgrounds_with_dsskey_unfold= + +##expansion_module.backgrounds(Only support T54S/T52S) +expansion_module.backgrounds= + ####################################################################################### -## Configure the access URL of firmware ## +## BSFT Setting ## ####################################################################################### -#Before using this parameter, you should store the desired firmware (x.71.x.x.rom) to the provisioning server. -firmware.url = {$yealink_firmware_url}/{$yealink_firmware_t46s} +bw.enable = + +####################################################################################### +## BLF/BLF List ## +####################################################################################### +phone_setting.auto_blf_list_enable= +phone_setting.blf_list_sequence_type= + +blf.enhanced.parked.enable= +blf.enhanced.parked.led = +blf.enhanced.parked.parked.action = +blf.enhanced.parked.talking.action = +blf.enhanced.parked.callin.action = +blf.enhanced.parked.idle.action = + +blf.enhanced.talking.enable= +blf.enhanced.talking.led= +blf.enhanced.talking.parked.action = +blf.enhanced.talking.talking.action = +blf.enhanced.talking.callin.action = +blf.enhanced.talking.idle.action = + +blf.enhanced.callout.enable = +blf.enhanced.callout.led= +blf.enhanced.callout.parked.action = +blf.enhanced.callout.talking.action = +blf.enhanced.callout.callin.action = +blf.enhanced.callout.idle.action = + +blf.enhanced.callin.enable = +blf.enhanced.callin.led= +blf.enhanced.callin.parked.action = +blf.enhanced.callin.talking.action = +blf.enhanced.callin.callin.action= +blf.enhanced.callin.idle.action= + +blf.enhanced.idle.enable= +blf.enhanced.idle.led= +blf.enhanced.idle.parked.action= +blf.enhanced.idle.talking.action= +blf.enhanced.idle.callin.action= +blf.enhanced.idle.idle.action= + +features.blf_list_version= +sip.sub_refresh_random= +sip.terminate_notify_sub_delay_time= + +features.blf_led_mode= +features.blf_pickup_only_send_code= + +####################################################################################### +## SCA ## +####################################################################################### +features.auto_release_bla_line= +features.barge_in_via_username.enable= + + + +####################################################################################### +## Call Park ## +####################################################################################### +features.call_park.enable= +features.call_park.park_mode= +features.call_park.park_code= +features.call_park.park_retrieve_code= +features.call_park.direct_send.enable= +features.call_park.park_visual_notify_enable= +features.call_park.park_ring= +features.call_park.group_enable= +features.call_park.group_park_code= +sip.call_park_without_blf= +features.call_park.line_restriction.enable= + + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +acd.enable= +acd.auto_available_timer= + + + + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +bw.xsi.enable= +sip.authentication_for_xsi = +default_input_method.xsi_password= + + +####################################################################################### +## Broadsoft Network Directory ## +####################################################################################### +bw.xsi.directory.enable= +bw.calllog_and_dir = +bw.xsi.call_log.enable= +bw_phonebook.custom= +bw_phonebook.enterprise_common_enable= +bw_phonebook.enterprise_common_displayname= +bw_phonebook.enterprise_enable= +bw_phonebook.enterprise_displayname= +bw_phonebook.group_common_enable= +bw_phonebook.group_common_displayname= +bw_phonebook.personal_enable= +bw_phonebook.personal_displayname= +bw_phonebook.group_enable= +bw_phonebook.group_displayname = +directory.update_time_interval= +bw.xsi.directory.alphabetized_by_lastname.enable= +directory_setting.bw_directory.enable = +directory_setting.bw_directory.priority = +search_in_dialing.bw_directory.enable = +search_in_dialing.bw_directory.priority = + + + +####################################################################################### +## Call Pickup ## +####################################################################################### +features.pickup.direct_pickup_enable = +features.pickup.group_pickup_enable = +features.pickup.direct_pickup_code = +features.pickup.group_pickup_code = +features.pickup.blf_audio_enable = +features.pickup.blf_visual_enable = +features.pickup_display.method = + + + + +####################################################################################### +## Alert Info ## +####################################################################################### +features.alert_info_tone = + + +####################################################################################### +## Broadsoft Visual Voice Mail ## +####################################################################################### +bw.voice_mail.visual.enable= +voice_mail.message_key.mode= +bw.voice_mail.visual.display_videomail.enable= + + + +####################################################################################### +## Broadsoft Call Recording ## +####################################################################################### +bw.call_recording.mode = + + +####################################################################################### +## Broadsoft Call Decline ## +####################################################################################### +features.call_decline.enable = + + +####################################################################################### +## BLF Ring Type ## +####################################################################################### +features.blf.ring_type = + + + +####################################################################################### +## Features Sync ## +####################################################################################### +features.feature_key_sync.enable = +features.forward.feature_key_sync.local_processing.enable = +features.forward.feature_key_sync.enable = +features.dnd.feature_key_sync.local_processing.enable = +features.dnd.feature_key_sync.enable = +call_waiting.mode = + + +####################################################################################### +## Broadsoft UC ## +####################################################################################### +##Only T54S/T52S/T48G/T48S/T46G/T46S/T29G Models support the parameter +bw.xmpp.enable = +features.uc_password = +features.uc_username = +bw.xmpp.presence_icon.mode = +bw.xmpp.change_presence.force_manual.enable = +bw.xmpp.change_presence.enable = +phone_setting.dsskey_directory_auto.enable = +features.uc_dir.match_tail_number= +directory_setting.bw_uc_buddies.enable = +directory_setting.bw_uc_buddies.priority = +search_in_dialing.bw_uc_buddies.enable = +search_in_dialing.bw_uc_buddies.priority = + + + + +####################################################################################### +## Metaswitch Setting ## +####################################################################################### +meta.enable = +meta.login_mode = +meta.comm_portal.server.username = +meta.comm_portal.server.password = +meta.comm_portal.server.url = +meta.comm_portal.enable = +meta.comm_portal.contacts.update_interval = +meta.comm_portal.acd.enable= +meta.comm_portal.replace_local_call_list.enable= +meta.comm_portal.contacts.group.mlhgs.label= +meta.comm_portal.contacts.group.extensions.label= +meta.comm_portal.contacts.group.contacts.label= +meta.comm_portal.contacts.group.mlhgs.enable= +meta.comm_portal.contacts.group.extensions.enable= +meta.comm_portal.contacts.group.contacts.enable= +meta.comm_portal.call_list.enable= +meta.comm_portal.contacts.enable= +meta.comm_portal.message.enable= +meta.comm_portal.logout.enable = +meta.comm_portal.keep_alive_interval_time = + + +####################################################################################### +## Genbend Setting ## +####################################################################################### +gb.sopi.enable= +gb.sopi.gab.enable= +gb.sopi.pab.enable= +features.pab.soupuser= +features.pab.enable= +gb.sopi.pab.match_in_calling.enable= +gb.sopi.gab.retain_search_filter= +gb.sopi.service_url= +gb.sopi.password= +gb.sopi.username= +directory_setting.gb_gab_directory.priority = +directory_setting.gb_gab_directory.enable = +directory_setting.gb_pab_directory.enable = +directory_setting.gb_pab_directory.priority = +search_in_dialing.gb_pab_directory.priority = +search_in_dialing.gb_pab_directory.enable = +