From 171f1adbf222e249a92393bcebbfc36a2347c26d Mon Sep 17 00:00:00 2001 From: Mark Crane Date: Sun, 22 Dec 2013 07:07:33 +0000 Subject: [PATCH] Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530. --- .../y000000000020.cfg} | 2608 +++++------ .../provision/yealink/t20/{$mac}.cfg | 2820 +++++++---- .../provision/yealink/t22/y000000000022cfg | 1215 +++++ .../provision/yealink/t22/{$mac}.cfg | 4117 ++++++++--------- .../provision/yealink/t32g/y000000000032.cfg | 1215 +++++ .../provision/yealink/t32g/{$mac}.cfg | 1887 ++++++++ .../provision/yealink/t38g/{$mac}.cfg | 234 +- .../yealink/vp530/y0000000000530.cfg | 1021 ++++ .../provision/yealink/vp530/{$mac}.cfg | 1386 ++++++ 9 files changed, 11843 insertions(+), 4660 deletions(-) rename resources/templates/provision/yealink/{t22/y000000000005.cfg => t20/y000000000020.cfg} (65%) create mode 100644 resources/templates/provision/yealink/t22/y000000000022cfg create mode 100644 resources/templates/provision/yealink/t32g/y000000000032.cfg create mode 100644 resources/templates/provision/yealink/t32g/{$mac}.cfg create mode 100644 resources/templates/provision/yealink/vp530/y0000000000530.cfg create mode 100644 resources/templates/provision/yealink/vp530/{$mac}.cfg diff --git a/resources/templates/provision/yealink/t22/y000000000005.cfg b/resources/templates/provision/yealink/t20/y000000000020.cfg similarity index 65% rename from resources/templates/provision/yealink/t22/y000000000005.cfg rename to resources/templates/provision/yealink/t20/y000000000020.cfg index 38cb348729..fbdda984d6 100644 --- a/resources/templates/provision/yealink/t22/y000000000005.cfg +++ b/resources/templates/provision/yealink/t20/y000000000020.cfg @@ -1,1393 +1,1215 @@ -#!version:1.0.0.1 - -##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## - -####################################################################################### -## Network ## -####################################################################################### - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -network.primary_dns= -network.secondary_dns = - -#Configure the duplex mode and the speed of the WAN port. -#0-Auto negotiate (default), 1-Full duplex 10Mbps, 2-Full duplex 100Mbps, 3-Half duplex 10Mbps, 4-Half duplex 100Mbps; -network.internet_port.speed_duplex = - -#Configure the username and password for PPPOE connection. -#Require reboot; -network.pppoe.user = -network.pppoe.password = - -#Configure the PC port type; 0-Router, 1-Bridge (default); -#Require reboot; -network.bridge_mode = - -#Configure the IP address and mask when the PC port is configured as Router. -#Require reboot; -network.pc_port.ip = -network.pc_port.mask = - -#Configure the duplex mode and the speed of the PC port when configured as Router. -#0-Auto negotiate (default), 1-Full duplex 10Mbps, 2-Full duplex 100Mbps, 3-Half duplex 10Mbps, 4-Half duplex 100Mbps; -network.pc_port.speed_duplex = - -#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); -#Require reboot; -network.pc_port.dhcp_server = - -#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. -network.dhcp.start_ip = -network.dhcp.end_ip = - -#Enable or disable the VLAN of WAN prot; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.vlan.internet_port_enable = - -#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 0. -#Require reboot; -network.vlan.internet_port_vid = - -#Configure the VLAN priority, it ranges from 0 (default) to 7. -#Require reboot; -network.vlan.internet_port_priority = - -#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.vlan.pc_port_enable = - -#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. -#Require reboot; -network.vlan.pc_port_vid = - -#Configure the VLAN priority, it ranges from 0 (default) to 7. -#Require reboot; -network.vlan.pc_port_priority = - -#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default); -#Require reboot; -network.vlan.dhcp_enable = - -#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255. -#Multiple options separated by a comma. It supports up to 5 options in all. -#Require reboot; -network.vlan.dhcp_option = - -#Configure the transmit package mode when the VLAN of PC port is enabled; -#0-The package is not treated and forwarded directly from PC port to the WAN port; -#1-The package is added the tag and forwarded from PC port to the WAN port, if the package is not the tag. -#Require reboot; -network.vlan.pc_port_mode = - -#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS(default), 2-HTTP Only, 3-HTTPS Only; -#Require reboot; -network.web_server_type = - -#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. -#Require reboot; -network.port.http = -network.port.https = - -#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. -#Require reboot; -network.port.max_rtpport = - -#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. -#Require reboot; -network.port.min_rtpport = - -#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. -#Require reboot; -network.qos.rtptos = - -#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26. -#Require reboot; -network.qos.signaltos = - -#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; -#Require reboot; -network.802_1x.mode = - -#Configure the username and password for 802.1x authentication. -#Require reboot; -network.802_1x.identity = -network.802_1x.md5_password = - -#Configure the access URL of the root and client certificates. -network.802_1x.root_cert_url = -network.802_1x.client_cert_url = - -#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.vpn_enable = - -#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); -#Require reboot; -network.lldp.enable = - -#Configure the interval(in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60. -#Require reboot; -network.lldp.packet_interval = - -#Enable or disable the SNMP feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.snmp.enable = - -#Configure the SNMP port. -#Require reboot; -network.snmp.port = - -#Configure the IP address(es) of the trusted SNMP server,multiple IP addresses must be separated by a space. -#Require reboot; -network.snmp.trust_ip = - -#Enable or disable the span from WAN port to PC port feature; 0-Disabled (default), 1-Enabled; -#Require reboot; -network.span_to_pc_port = - -#Configure the phone whether to add the MAC address to the User-Agent header; 0-Do not add, 1-Add; -#Require reboot; -network.sip.tag_mac_to_ua.enable = - -####################################################################################### -## Syslog Server ## -####################################################################################### - -#Configure the IP address of the syslog server. -#Require reboot; -syslog.server = - -#Configure the syslog level. It ranges from 0 to 6, the default value is 3. -#Require reboot; -syslog.log_level = - -####################################################################################### -## TR069 ## -####################################################################################### - -#The TR069 feature is only applicable to some designated firmware version. -#All settings of TR069 require reboot. -#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; -managementserver.enable = - -#Configure the username and password for the phone to authenticate with the ACS. -managementserver.username = -managementserver.password = - -#Configure the access URL of the ACS. -managementserver.url = - -#Configure the username and password for the phone to authenticate the connection requests. -managementserver.connection_request_username = -managementserver.connection_request_password = - -#Enable or disable the phone to inform its configuration to the ACS; 0-Disabled (default), 1-Enabled; -managementserver.periodic_inform_enable = - -#Configure the interval (in seconds) the phone to inform its configuration to the ACS. The default value is 60. -managementserver.periodic_inform_interval = - -####################################################################################### -## Auto Provisioning ## -####################################################################################### - -#Configure the auto provision mode; -#0-Disabled (default), 1-Power on, 4-Repeatedly, 5-Weekly, 6-Power on + Repeatedly, 7-Power on + Weekly; -auto_provision.mode = 6 - -#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); -auto_provision.pnp_enable = - -#Configure the domain name of the PNP server. -auto_provision.pnp_domain_name = - -#Configure the value (manufacturer of the device) of the PNP subscribe message. -auto_provision.pnp_event_vendor = - -#Configure the interval (in minutes) for the phone to check new configuration files. It ranges from 1 to 43200, the default value is 1440. -#It is only applicable to "Repeatedly" and "Power on + Repeatedly" modes. -auto_provision.schedule.periodic_minute = - -#Configure the start time of the day for the phone to check new configuration files. The default value is 00:00. -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired start time of the day is seven forty-five a.m., the value format is 07:45. -auto_provision.schedule.time_from = - -#Configure the end time of the day for the phone to check new configuration files. The default time is 00:00. -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired end time of the day is seven forty-five p.m., the value format is 19:45. -auto_provision.schedule.time_to = - -#Configure the day of week for the phone to check new configuration files. The default vaule is 0123456. -#0-Sunday,1-Monday,2-Tuesday,3-Wednesday,4-Thursday,5-Friday,6-Saturday; -#It is only applicable to "Weekly" and "Power on + Weekly" modes. -#If the desired week is Monday, Tuesday and Wednesday, the value format is 012. -auto_provision.schedule.dayofweek = - -#Configure the URL of the auto provisioning server. -auto_provision.server.url = tftp://{$domain_name} - -#Configure the username and password for downloading. -auto_provision.server.username = -auto_provision.server.password = - -#Configure the name of the common file. -#T28P: y000000000000.cfg, T26P: y000000000004.cfg, T22P: y000000000005.cfg, T20P: y000000000007.cfg; -auto_provision.common_file_name = y000000000005.cfg - -#Enable or disable DHCP option mode; 0-Disabled, 1-Enabled (default); -auto_provision.dhcp_option.enable = - -#Configure the value (manufacturer of the device) of DHCP option 60. -auto_provision.dhcp_option.option60_value = - -#Configure the custom DHCP option number. It ranges from 128 to 254. -auto_provision.dhcp_option.list_user_options = - -#Configure AES key (16 characters) for decrypting the common CFG file. -auto_provision.aes_key_16.com = - -#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. -auto_provision.aes_key_16.mac = - -#Configure the mode of downloading configuration files for the phone. The value is 0(default) or 1. -auto_provision.update_file_mode = 0 - -####################################################################################### -## Auto Provisioning Code ## -####################################################################################### - -#This feature allows user to trigger the auto provisioning by pressing a predefined string on the phone. -#Require reboot; -#"X" ranges from 1 to 50 - -#Configure the auto provisioning name. -#The valid value is a string, the maximum length is 100. -#autoprovision.X.name = - -#Configure the auto provisioning code; -#The valid value is a string, the maximum length is 100. -#autoprovision.X.code = - -#Configure the URL of the auto provisioning server. -#The valid value is a string, the maximum length is 256. -#autoprovision.X.url = - -#Configure the username and password for downloading. -#The valid value is a string, the maximum length is 100. -#autoprovision.X.user = -#autoprovision.X.password = - -#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. -#autoprovision.X.com_aes = -#autoprovision.X.mac_aes = - -autoprovision.1.name = -autoprovision.1.code = -autoprovision.1.url = -autoprovision.1.user = -autoprovision.1.password = -autoprovision.1.com_aes = -autoprovision.1.mac_aes = - -autoprovision.2.name = -autoprovision.2.code = -autoprovision.2.url = -autoprovision.2.user = -autoprovision.2.password = -autoprovision.2.com_aes = -autoprovision.2.mac_aes = - -####################################################################################### -## Phone Features ## -####################################################################################### - -#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); -sip.use_23_as_pound = - -#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; -sip.rfc2543_hold = - -#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); -sip.use_out_bound_in_dialog = - -#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. -sip.reg_surge_prevention = - -#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); -watch_dog.enable = - -#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; -#0-Disabled, 1-Enabled (default); -transfer.semi_attend_tran_enable = - -#Enable or disable the phone to complete the blind or attended transfer through on-hook; -#0-Disabled,1-Enabled(default); -transfer.blind_tran_on_hook_enable = -transfer.on_hook_trans_enable = - -#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); -transfer.dsskey_deal_type = - -#Enable or disable the phone to enter the transfer to interface during two calls when pressing the transfer soft key or TRAN key; 0-Disable, 1-Enabled (default); -transfer.multi_call_trans_enable = - -#Enable or disable the conference initiator to transfer the call when hanging up. -#0-Disabled(default),1-Enabled; -transfer.tran_others_after_conf_enable = - - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Configure the call forward key mode; 0-Phone mode (default), 1-Custom mode. -features.fwd_mode = - -#Enable or disable the always forward feature; 0-Disabled (default), 1-Enabled; -forward.always.enable = - -#Configure the target number that the phone will forward the call to. -forward.always.target = - -#Configure the always forward on code and off code. -forward.always.on_code = -forward.always.off_code = - -#Enable or disable the busy forward feature; 0-Disabled (default), 1-Enabled; -forward.busy.enable = -forward.busy.target = -forward.busy.on_code = -forward.busy.off_code = - -#Enable or disable the no answer forward feature; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -forward.no_answer.enable = -forward.no_answer.target = -forward.no_answer.timeout = -forward.no_answer.on_code = -forward.no_answer.off_code = - -#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; -forward.international.enable = - -####################################################################################### -## DND ## -####################################################################################### - -#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. -features.dnd_mode = - -#Configure the DND on code and off code. -features.dnd.on_code = -features.dnd.off_code = - -####################################################################################### -## Voice ## -####################################################################################### - -#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; -voice.vad = - -#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); -voice.cng = - -#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); -voice.echo_cancellation = - -#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. -voice.side_tone= - -#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. -#Require reboot; -voice.handfree_send = -voice.handset_send = -voice.headset_send = - -#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); -voice.jib.adaptive = - -#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. -voice.jib.min = -voice.jib.max = -voice.jib.normal = - -#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. -#voice.tone.country = Custom -voice.tone.country = - -#Customize the tone when the "voice.tone.country" is configured as Custom. -#The value format: Frequency/Duration. -#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. -#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). -#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. -#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by a comma. -#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 -voice.tone.dial = -voice.tone.ring = -voice.tone.busy = -voice.tone.congestion = -voice.tone.callwaiting = -voice.tone.dialrecall = -voice.tone.record= -voice.tone.info = -voice.tone.stutter = -voice.tone.message = -voice.tone.autoanswer = - -#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. -voice.handfree.spk_vol = -voice.handset.spk_vol = -voice.headset.spk_vol = - -#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. -voice.handfree.tone_vol = -voice.handset.tone_vol = -voice.headset.tone_vol = - -#configure the preview call mode; 1-Ignore:the mixed of tone and RTP (default), 2-Force: discard the RTP and play the tone, 3-Skip: skip the tone to play the RTP; -voice.call_preview_mode= - -####################################################################################### -## Security Settings ## -####################################################################################### - -#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; -#0-Disabled, 1-Enabled (default); -security.trust_certificates = - -#Define the login username and password of the user, var and administrator. -#If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. -#If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. - -#The following examples change the user's username to "user23" and the user's password to "user23pwd". -#security.user_name.user = user23 -#security.user_password = user23:user23pwd -#The following examples change the var's username to "var55" and the var's password to "var55pwd". -#security.user_name.var = var55 -#security.user_password = var55:var55pwd - -security.user_name.user = -security.user_name.admin = -security.user_name.var = -security.user_password = - -#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; -#Require reboot; -security.var_enable = - -####################################################################################### -## Customize the softkey ## -####################################################################################### -#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. -#Before using these parameters, you should store the desired XML files to the provisioning server. -custom_softkey_call_failed.url = -custom_softkey_call_in.url = -custom_softkey_connecting.url = -custom_softkey_dialing.url = -custom_softkey_ring_back.url = -custom_softkey_talking.url = - -####################################################################################### -## Memory Key (For T26P and T28P) ## -####################################################################################### -#X ranges from 1 to 10; -#memorykey.x.line--Configure the desired line to apply the key feature. T26P line value ranges from 0 to 3. T28P line value ranges from 0 to 6. -#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. -#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. -#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. -#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. -#memorykey.x.type--Assign the desired feature to the memory key. -#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS -# 9-Direct Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL -# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser -# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Broadsoft Group -#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. - -#Configure Memory Key1 -memorykey.1.line = -memorykey.1.value = -memorykey.1.pickup_value = -memorykey.1.type = -memorykey.1.xml_phonebook = - -#Configure Memory Key2 -memorykey.2.line = -memorykey.2.value = -memorykey.2.pickup_value = -memorykey.2.type = -memorykey.2.xml_phonebook = - -#Configure Memory Key3 -memorykey.3.line = -memorykey.3.value = -memorykey.3.pickup_value = -memorykey.3.type = -memorykey.3.xml_phonebook = - - -#Configure Memory Key4 -memorykey.4.line = -memorykey.4.value = -memorykey.4.pickup_value = -memorykey.4.type = -memorykey.4.xml_phonebook = - -#Configure Memory Key5 -memorykey.5.line = -memorykey.5.value = -memorykey.5.pickup_value = -memorykey.5.type = -memorykey.5.xml_phonebook = - -#Configure Memory Key6 -memorykey.6.line = -memorykey.6.value = -memorykey.6.pickup_value = -memorykey.6.type = -memorykey.6.xml_phonebook = - -#Configure Memory Key7 -memorykey.7.line = -memorykey.7.value = -memorykey.7.pickup_value = -memorykey.7.type = -memorykey.7.xml_phonebook = - -#Configure Memory Key8 -memorykey.8.line = -memorykey.8.value = -memorykey.8.pickup_value = -memorykey.8.type = -memorykey.8.xml_phonebook = - -#Configure Memory Key9 -memorykey.9.line = -memorykey.9.value = -memorykey.9.pickup_value = -memorykey.9.type = -memorykey.9.xml_phonebook = - -#Configure Memory Key10 -memorykey.10.line = -memorykey.10.value = -memorykey.10.pickup_value = -memorykey.10.type = -memorykey.10.xml_phonebook = - -####################################################################################### -## Line Key ## -####################################################################################### - -#The x of the parameter "linekey.x.line" ranges from 1 to 6. -#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. -#linekey.x.lable--Define the label for each line key. - -#Configure Line Key1 -linekey.1.line = -linekey.1.value = -linekey.1.pickup_value = -linekey.1.type = -linekey.1.xml_phonebook = -linekey.1.label = - -#Configure Line Key2 -linekey.2.line = -linekey.2.value = -linekey.2.pickup_value = -linekey.2.type = -linekey.2.xml_phonebook = -linekey.2.label = - -#Configure Line Key3 -linekey.3.line = -linekey.3.value = -linekey.3.pickup_value = -linekey.3.type = -linekey.3.xml_phonebook = -linekey.3.label = - -#Configure Line Key4 (for T28P only) -linekey.4.line = -linekey.4.value = -linekey.4.pickup_value = -linekey.4.type = -linekey.4.xml_phonebook = -linekey.4.label = - -#Configure Line Key5 (for T28P only) -linekey.5.line = -linekey.5.value = -linekey.5.pickup_value = -linekey.5.type = -linekey.5.xml_phonebook = -linekey.5.label = - -#Configure Line Key6 (for T28P only) -linekey.6.line = -linekey.6.value = -linekey.6.pickup_value = -linekey.6.type = -linekey.6.xml_phonebook = -linekey.6.label = - -########################################################################################## -## Programmable Key ## -########################################################################################## -#X ranges from 1 to 15. -#programablekey.x.type--Customize the programmable key type. -#The valid types are: -#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Direct Pickup 13-Spead Dial -#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 31-Switch Account 32-New SMS -#33-Status 40-PTT 43-Local Phonebook 44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 50-Keypad Lock -#PTT-add a specified prefix number before the dialed number. -#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. -#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. -#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. - -#programablekey.x.value = -#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. -#programablekey.x.history_type = - -#programablekey.x.label--This parameter is only available to the key 1 to key 4. - -programablekey.1.type = -programablekey.1.line = -programablekey.1.value = -programablekey.1.xml_phonebook = -programablekey.1.history_type = -programablekey.1.label = - -########################################################################################## -## Expansion Key ## -########################################################################################## -#X ranges from 1 to 16, Y ranges from 1 to 40. -#expansion_module.x.key.y.type = 37 (Switch by default) -#expansion_module.x.key.y.line = 0 -#expansion_module.x.key.y.value = -#expansion_module.x.key.y.pickup_value = -#expansion_module.x.key.y.label = -#expansion_module.X.key.Y.xml_phonebook = - -#Each expansion module1 key1 -expansion_module.1.key.1.type = -expansion_module.1.key.1.line = -expansion_module.1.key.1.value = -expansion_module.1.key.1.pickup_value = -expansion_module.1.key.1.label = -expansion_module.1.key.1.xml_phonebook = - -#Each expansion module1 key2 -expansion_module.1.key.2.type = -expansion_module.1.key.2.line = -expansion_module.1.key.2.value = -expansion_module.1.key.2.pickup_value = -expansion_module.1.key.2.label = -expansion_module.1.key.2.xml_phonebook = - -#Each expansion module2 key1 -expansion_module.2.key.1.type = -expansion_module.2.key.1.line = -expansion_module.2.key.1.value = -expansion_module.2.key.1.pickup_value = -expansion_module.2.key.1.label = -expansion_module.2.key.1.xml_phonebook = - -####################################################################################### -## Automatic Call Distribute ## -####################################################################################### -#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; -acd.auto_available = - -#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. -acd.auto_available_timer = - -####################################################################################### -# Action URL Settings ## -####################################################################################### - -#action_url.setup_completed--Inform the server that the phone has completed the startup. -#action_url.dnd_on-- Inform the server that the DND is activated on the phone. -#The value format is: http://IP address of server/help.xml?variable name=variable value. -#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. -#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. -#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. -#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. -#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. -#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. -#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. -#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. -#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. -#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac - -action_url.setup_completed = -action_url.log_on = -action_url.log_off = -action_url.register_failed = -action_url.off_hook = -action_url.on_hook = -action_url.incoming_call = -action_url.outgoing_call = -action_url.call_established = -action_url.dnd_on = -action_url.dnd_off = -action_url.always_fwd_on = -action_url.always_fwd_off = -action_url.busy_fwd_on = -action_url.busy_fwd_off = -action_url.no_answer_fwd_on = -action_url.no_answer_fwd_off = -action_url.transfer_call = -action_url.blind_transfer_call = -action_url.attended_transfer_call = -action_url.hold = -action_url.unhold = -action_url.mute = -action_url.unmute = -action_url.missed_call = -action_url.call_terminated = -action_url.busy_to_idle = -action_url.idle_to_busy = -action_url.ip_change = -action_url.answer_new_incoming_call = -action_url.reject_incoming_call = -action_url.transfer_finished = -action_url.transfer_failed = -action_url.forward_incoming_call = - -####################################################################################### -## Language Settings ## -####################################################################################### - -#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. -lang.wui = - -#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. -#lang.gui = English -lang.gui = - -####################################################################################### -## Time Settings ## -####################################################################################### - -#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. -#The default time zone name is China(Beijing). -#Refer to Yealink IP Phones User Guide for more available time zones and time zone names. -#local_time.time_zone = +8 -#local_time.time_zone_name = China(Beijing) -local_time.time_zone = -7 -local_time.time_zone_name = United States-MST no DST - -#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. -local_time.ntp_server1 = cn.pool.ntp.org -local_time.ntp_server2 = cn.pool.ntp.org - -#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. -local_time.interval = - -#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); -local_time.summer_time = 0 - -#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; -local_time.dst_time_type = - -#Configure the start time of DST. The default value is 1/1/0. -#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. -#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. -#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. -local_time.start_time = - -#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. -local_time.end_time = - -#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is 60. -local_time.offset_time = - -#Configure the time format; 0-12 Hour, 1-24 Hour (default); -local_time.time_format = 0 - -#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; -local_time.date_format = - -#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; -local_time.dhcp_time = 1 - -####################################################################################### -## Hot Desking ## -####################################################################################### -#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; -#hotdesking.startup_register_name_enable = 1 (default) -#hotdesking.startup_username_enable = 1 (default) -#hotdesking.startup_password_enable = 0 (default) -#hotdesking.startup_sip_server_enable = 0 (default) -#hotdesking.startup_outbound_enable = 0 (default) - -hotdesking.startup_register_name_enable = -hotdesking.startup_username_enable = -hotdesking.startup_password_enable = -hotdesking.startup_sip_server_enable = -hotdesking.startup_outbound_enable = - -#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; -#0-Disabled, 1-Enabled; -#hotdesking.dsskey_register_name_enable = 1 (default) -#hotdesking.dsskey_username_enable = 1 (default) -#hotdesking.dsskey_password_enable = 0 (default) -#hotdesking.dsskey_sip_server_enable = 0 (default) -#hotdesking.dsskey_outbound_enable = 0 (default) - -hotdesking.dsskey_register_name_enable = -hotdesking.dsskey_username_enable = -hotdesking.dsskey_password_enable = -hotdesking.dsskey_sip_server_enable = -hotdesking.dsskey_outbound_enable = - -####################################################################################### -## Distinctive Ring Tones ## -####################################################################################### - -#"X" ranges from 1 to 10; -#Configure the text to map the keywords contained in the "Alert-info" header. -#distinctive_ring_tones.alert_info.X.text = family -distinctive_ring_tones.alert_info.1.text = - -#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. -#1-Ring1.wav, 2-Ring2.wav, 3-Ring3.wav, 4-Ring4.wav, 5-Ring5.wav, 6-Ring6.wav, 7-Ring7.wav, 8-Ring8.wav. -#distinctive_ring_tones.alert_info.X.ringer = 1 -distinctive_ring_tones.alert_info.1.ringer = - -####################################################################################### -## Auto Redial ## -####################################################################################### - -#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; -auto_redial.enable = - -#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. -auto_redial.interval = - -#Configure the auto redial times. It ranges from 1 to 300. The default value is 10. -auto_redial.times = - -####################################################################################### -## Zero Touch ## -####################################################################################### -#Enable or disable the Zero Touch feature; 0-Disabled (default), 1-Enabled; -zero_touch.enable = - -#Configure the waiting time (in seconds) before canceling the Zero Touch. It ranges from 0 to 100, the default value is 5. -zero_touch.wait_time = - -####################################################################################### -## Push XML ## -####################################################################################### - -push_xml.server = - -#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; -push_xml.block_in_calling = - -#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; -push_xml.sip_notify = - -####################################################################################### -## Dial Plan ## -####################################################################################### - -#Configure the area code; -dialplan.area_code.code = -dialplan.area_code.min_len = 1 -dialplan.area_code.max_len = 15 - -#When applying the rule to multiple lines, each line ID separated by a comma. -#e.g. dialplan.area_code.line_id = 1,2,3 -dialplan.area_code.line_id = - -#Configure the block out number. X ranges from 1 to 10. -#dialplan.block_out.number.x = -dialplan.block_out.number.1 = - -#When applying the rule to multiple lines, mutiple lines must be separated by a comma. E.g. 1,2,3. -#dialplan.block_out.line_id.X = -dialplan.block_out.line_id.1 = - -#Configure the replace rule. X ranges from 1 to 20. -#dialplan.item.X = Enabled,Prefix,Replaced,LineID -#Enabled: Enable or disable the replace rule. 0-Disabled, 1-Enabled; Prefix: Specify the numbers that need replacing; -#Replaced: Specify the alternate numbers; -#LineID: Specify the line ID to apply the replace rule,multiple lines ID must be separated by a comma; -dialplan.item.1 = - -#Configure the dialnow rule. X ranges from 1 to 20. -#dialnow.item.X = Dial-now rule,Line ID -#Dial-now rule: Specify the numbers that need replacing; -#Line ID:Specify the line ID to apply the replace rule,multiple lines must be separated by a comma; -dialnow.item.1 = - -####################################################################################### -## BSFT Phonebook ## -####################################################################################### - -#Configuration of BW phonebook. X ranges from 1 to 6. -#bw_phonebook.data.X.server = -#bw_phonebook.data.X.port = -#bw_phonebook.data.X.username = -#bw_phonebook.data.X.password = -#bw_phonebook.data.X.name = - -bw_phonebook.data.1.server = -bw_phonebook.data.1.port = -bw_phonebook.data.1.username = -bw_phonebook.data.1.password = -bw_phonebook.data.1.name = - -#Configure the search parameter of Broadsoft phonebook version 1.0, mutiple parameters must be separated by a "&"symbol. -bw_phonebook.search_params_v1 = - -#Configure the search parameter of Broadsoft phonebook version 2.0, mutiple parameters must be separated by a "&"symbol. -bw_phonebook.search_params_v2 = - -#Configure the mode of search parameters; 0-AND, 1-OR (default); The vaule only works in Broadsoft phonebook verion 2.0; -bw_phonebook.search_mode_or = - -####################################################################################### -## BSFT Call Log ## -####################################################################################### - -#Configuration of the BW call log. X ranges from 1 to 3. -#bw_call_log.data.X.server = -#bw_call_log.data.X.port = -#bw_call_log.data.X.username = -#bw_call_log.data.X.password = -#bw_call_log.data.X.name = - -bw_call_log.data.1.server = -bw_call_log.data.1.port = -bw_call_log.data.1.username = -bw_call_log.data.1.password = -bw_call_log.data.1.name = - -#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; -#0-Disabled (default), 1-Enabled; -#Require reboot; -bw.calllog_and_dir = - -#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); -#Require reboot; -bw.behave_calllog = - -#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); -#Require reboot; -bw.behave_bw_dir = - -#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; -bw.feature_key_sync = - -####################################################################################### -## Remote phonebook ## -####################################################################################### - -#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. -#remote_phonebook.data.X.url = -#remote_phonebook.data.X.name = - -remote_phonebook.data.1.url = -remote_phonebook.data.1.name = - -####################################################################################### -## LDAP Settings ## -####################################################################################### -#Configure the search criteria for name and number lookups. -ldap.name_filter = -ldap.number_filter = - -ldap.host = 0.0.0.0 -ldap.port = 389 - -ldap.base = -ldap.user = -ldap.password = - -#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. -ldap.max_hits = - -ldap.name_attr = -ldap.numb_attr = -ldap.display_name = - -#Configure the LDAP version. The valid value is 2 or 3 (default). -ldap.version = - -#Conifugre the search delay time. It ranges from 0 (default) to 2000. -ldap.search_delay = - -#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; -ldap.call_in_lookup = - -#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; -ldap.ldap_sort = - -#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; -ldap.dial_lookup = - -####################################################################################### -## Phone Features ## -####################################################################################### - -#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; -#features.dnd_refuse_code = 480 -features.dnd_refuse_code = - -#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). -features.normal_refuse_code = - -#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; -features.call_completion_enable = - -#Configure the LED flashing mode of the BLF key (line key). The value is 0(default) or 1. -features.blf_led_mode = - -#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); -call_waiting.enable = - -#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); -call_waiting.tone = - -#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); -features.intercom.allow = - -#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; -features.intercom.mute = - -#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); -features.intercom.tone = - -#Enable or disable the phone to barge in an intercom call; 0-Disabled (default), 1-Enabled; -features.intercom.barge = - -#Enables or disables the IP phone to query the contact names from the remote phonebook when receiving incoming calls; 0-Disabled (default), 1-Enabled; -features.remote_phonebook.enable = - -#Set the interval (in seconds) for the phone to update the information of the remote phonebook. The default value is 3600. -features.remote_phonebook.flash_time = - -#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value is 4. -features.hotline_number = -features.hotline_delay = - -#Enable or disable the phone to suppress the display of DTMF digits; 0-Disabled (default), 1-Enabled; -features.dtmf.hide = - -#Enables or disables the IP phone to display the DTMF digits for a short period before displaying as asterisks; 0-Disabled (default), 1-Enabled; -features.dtmf.hide_delay = - -#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). -features.dtmf.repetition = - -#Configure DTMF sequences. It can be consisted of digits, alphabets, * and #. -features.dtmf.transfer = - -#Enable or disable the phone to send DTMF sequences during a call when pressing the transfer soft key or the TRAN key; 0-Disabled (default), 1-Enabled; -features.dtmf.replace_tran = - -#Enable or disable the headset prior feature; 0-Disabled (default), 1-Enabled; -features.headset_prior = - -#Enable or disable the dual headset feature; 0-Disabled (default), 1-Enabled; -features.headset_training = - -#Configure the delay time (in milliseconds) before transfering a call. The default value is 0. -features.hold_trans_delay = - -#Enbale or disable the phone to play a local DTMF tone; 0-Disabled, 1-Enabled (default); -features.play_local_dtmf_tone_enable = - -#Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled; -features.auto_release_bla_line = - -#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. -features.busy_tone_delay = - -#Configure the phone whether to send a pound key when pressing double pound keys; 0-Send one pound key (default), 1-Do not send any pound key; -features.send_pound_key = - -#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; -features.pound_key.mode = - -#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); -features.send_key_tone = -features.key_tone = - -#Enable or disable the phone to play a warning tone when there is a held call; 0-Disabled, 1-Enabled (default); -features.play_hold_tone.enable = - -#Configure the interval of playing a warning tone. The default value is 30s. -features.play_hold_tone.delay = - -features.redial_tone = - -#Enable or disable the phone with active accounts to play tones in the dialing interface differently from the phone with no active accounts; 0-Disabled (default), 1-Enbaled; -features.partition_tone = - -#Enable or disable the phone to encrypt the digits of the dialed number. The encrypted digits are displayed as asterisks on the LCD screen; 0-Disabled (default), 1-Enabled; -features.password_dial.enable = - -#Configure the prefix numbers displayed before the encrypted digits. -features.password_dial.prefix = - -#Configure the length of encrypted digits. -features.password_dial.length = - -#Enable or disable the phone to diaplay the Save Call Log option on the web user interface; 0-Disabled, 1-Enabled (default); -features.history_save_display = - -#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); -features.save_call_history = - -#Configure the power Indicator LED to turn on ro turn off; 0-On (default), 1-Off; -features.power_led_on = - -#Specifie the address(es) or enters %uFFFD%uFFFDany%uFFFD%uFFFD from which Action URI will be accepted. -#For discontinuous IP addresses, each IP address is separated by comma, for example: 192.168.1.20,10.2.1.30 -#For continuous IP addresses, the format likes *.*.*.* and the %uFFFD%uFFFD*%uFFFD%uFFFD stands for the values 0~255. For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0~10.10.255.255. -#If left blank, the IP phone cannot receive or handle any HTTP GET request. -#If set to %uFFFD%uFFFDany%uFFFD%uFFFD, the IP phone accepts and handles HTTP GET requests from any IP address. -features.action_uri_limit_ip = - -#Configure the delay time (in seconds)of auto answer. The time ranges from 1 to 4, the default value is 1s. -features.auto_answer_delay = - -#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); -features.dsskey_blind_tran = - -#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. -features.relog_offtime = - -#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); -features.direct_ip_call_enable = - -#Configure the ringtone of emergency calls; -#features.emergency_ring = Emergency.wav -features.emergency_ring = - -#Enable or disable the phone to mute the call during an active call; 0-Disabled, 1-Enabled (default); -features.allow_mute = - -#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; -features.ringer_device.is_use_headset = - -#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; -features.pickup.group_pickup_enable = - -#Configure the group pickup code. -features.pickup.group_pickup_code = - -#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; -features.pickup.direct_pickup_enable = - -#Configure the directed pickup code. -features.pickup.direct_pickup_code = - -#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; -#0-Disabled (default), 1-Enabled; -features.pickup.blf_visual_enable = -features.pickup.blf_audio_enable = - -#Configure the input type when the phone is in the dialing state, if the parameter "ldap.dial_lookup" is Enabled; 0-2aB, 1-123 (default), 2-abc, 3-ABC; -features.ldap.input_type = - -#Enable or disable the phone to play the warning tone when receiving a vocie mail. 0-Disabled; 1-Enabled(default). -features.voice_mail_tone_enable = - -#Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. -phone_setting.inter_digit_time = - -#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. -phone_setting.flash_hook_timer = - -#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; -phone_setting.lock = - -#Configure the unlock password for the phone. The default value is 123. -phone_setting.phone_lock.unlock_pin = - -#Configures the interval (in seconds) to automatically lock the IP phone. It ranges from 0 to 3600, the default value is 0. -phone_setting.phone_lock.lock_time_out = - -#Configure the ring tone for the phone. System ring tones are: Common, Ring1.wav (default), Ring2.wav%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: phone_setting.ring_type = Ring2.wav -phone_setting.ring_type = - -#Configure the contrast of the LCD screen. It ranges from 1 to 10,the default value is 6. -phone_setting.contrast = - -#Configure the logo mode of the LCD screen; 0-Disabled (default), 1-System logo, 2-Custom logo; -phone_setting.lcd_logo.mode = - -#Configure the active backlight level. It ranges from 1 to 3, the default value is 2. -#The same level for different phones may result in different backlight intensities. -phone_setting.active_backlight_level = - -#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s. -phone_setting.backlight_time = - -#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. -#phone_setting.ring_for_tranfailed = Ring1.wav -phone_setting.ring_for_tranfailed = - -#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; -phone_setting.logon_wizard = - -#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; -phone_setting.predial_autodial = - -#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); -phone_setting.is_deal180 = - -#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. -phone_setting.dialnow_delay = - -#Enable or disable customizing the softkey layout; 0-Disabled (default), 1-Enabled; -phone_setting.custom_softkey_enable = - -#Configure the using mode of the headset key. The value is 0 or 1(default). -phone_setting.headsetkey_mode = - -#Configure the emergency number, each separated by a comma. The default value is 112,911,110. -phone_setting.emergency.number = - -#Configure the phone whether to end the call when the network is unavailable; 0-End the call, 1-Do not end the call. -phone_setting.end_call_net_disconnect.enable = - -#If leaving the field blank, the phone will display the value sent from the server when receiveing the 403 message; otherwise display the value entered in the filed. -#The default value is blank. -phone_setting.show_code403 = - -####################################################################################### -## Multicast ## -####################################################################################### -#Configure the codec of multicast paging. -multicast.codec = - -#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default); -#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority. -multicast.receive_priority.enable = - -#Configure the priority of multicast paging calls. It ranges from 0 to 10. -multicast.receive_priority.priority = - -#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10. -#multicast.listen_address.X.ip_address = -multicast.listen_address.1.ip_address = - -#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10. -#multicast.listen_address.X.label = -multicast.listen_address.1.label = - -####################################################################################### -## Configure the access URL of firmware ## -####################################################################################### -#Before using this parameter, you should store the desired firmware (x.70.x.x.rom) to the provisioning server. -firmware.url = - -####################################################################################### -## Configure the access URL of the customized ringtones ## -####################################################################################### -#Before using this parameter, you should store the desired ring tone (x.wav) to the provisioning server. -#For more information, refer to Yealink Auto Provisioning User Guide. -ringtone.url = - -#ringtone.delete = http://localhost/all,delete all the customized ring tones. -ringtone.delete = - -####################################################################################### -## Configure the access URL of language file ## -####################################################################################### -#Before using this parameter, you should store the desired language pack to the provisioning server. -#For more information, refer to Yealink Auto Provisioning User Guide. -gui_lang.url = - -#gui_lang.delete = http://localhost/all, delete all the customized languages. -gui_lang.delete = - -####################################################################################### -## Configure the access URL of logo file ## -####################################################################################### -#Before using this parameter, you should store the desired logo file (x.dob) to the provisioning server. -#For more information, refer to Yealink Auto Provisioning User Guide. -lcd_logo.url = - -#lcd_logo.delete = http://localhost/all, delete all the customized logo. -lcd_logo.delete = - -####################################################################################### -## Certificates ## -####################################################################################### -#Before using this parameter, you should store the desired certificate to the provisioning server. -trusted_certificates.url = - -#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. -trusted_certificates.delete = - -#Before using this parameter, you should store the desired certificate to the provisioning server. -server_certificates.url = - -#server_certificates.delete = http://localhost/all, delete the server certificate. -server_certificates.delete = - -####################################################################################### -## Local Contact/DST Time/Dialnow Rule/Replace Rule ## -####################################################################################### - -#Before using these parameters, you should store the desired resource files to the provisioning server. -#For more information, refer to Yealink SIP-T2xP IP Phone Family Administrator Guide. -local_contact.data.url = -auto_dst.url = -dialplan_dialnow.url = -dialplan_replace_rule.url = - -####################################################################################### -## Customized Factory Configurations ## -####################################################################################### -#Configure the access URL for downloading the customized factory configurations. -#Before using this parameter, you should store the desired factory configuration file to the provisioning server. -custom_factory_configuration.url = - -####################################################################################### -## Customized Configurations ## -####################################################################################### -#Configure the access URL for downloading the configurations. -#Before using this parameter, you should store the desired configuration file to the provisioning server. -configuration.url = - -####################################################################################### -## Call List ## -####################################################################################### -#Configure the access URL for downloading the call list. -#Before using this parameter, you should store the desired call list file to the provisioning server. -#Require reboot -call_list.url = - -####################################################################################### -## OpenVPN ## -####################################################################################### -#Configure the access URL for downloading the open VPN tar. -#Before using this parameter, you should store the desired VPN file to the provisioning server. -openvpn.url = - -####################################################################################### -## Configuration files for Var ## -####################################################################################### -#Configure the access URL for downloading the files for var. -#Before using this parameter, you should store the desired files to the provisioning server. -#Require reboot -web_item_level.url = \ No newline at end of file +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server. +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Configure the PC port type; 0-Router, 1-Bridge (default); +#Require reboot; +network.bridge_mode = + +#Configure the IP address and mask when the PC port is configured as Router. +#Require reboot; +network.pc_port.ip = +network.pc_port.mask = + +#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.pc_port.dhcp_server = + +#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. +network.dhcp.start_ip = +network.dhcp.end_ip = + +#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.pc_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.pc_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.pc_port_priority = + +#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only; +#Require reboot; +network.web_server_type = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120. +#Require reboot; +network.lldp.packet_interval = + +#Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.static_dns_enable = + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the IP address of the syslog server. +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## TR069 ## +####################################################################################### + +#The TR069 feature is only applicable to some designated firmware versions. +#All settings of TR069 require reboot. +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; +managementserver.enable = + +#Configure the username and password for the phone to authenticate with the ACS. +managementserver.username = +managementserver.password = + +#Configure the access URL of the ACS. +managementserver.url = + +#Configure the username and password for the phone to authenticate the connection requests. +managementserver.connection_request_username = +managementserver.connection_request_password = + +#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; +managementserver.periodic_inform_enable = + +#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. +managementserver.periodic_inform_interval = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); +auto_provision.pnp_enable = + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enable = + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly; +#auto_provision.weekly.mask = 0123456 +#auto_provision.weekly.begin_time = 00:00 +#auto_provision.weekly.end_time = 00:00 + +auto_provision.weekly.mask = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Configure the username and password for downloading. +auto_provision.server.username = +auto_provision.server.password = + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_option.enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. +#Require reboot; +#"X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.name = + +#Configure the auto provisioning code. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.x.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.user = +#autoprovision.x.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.x.com_aes = +#autoprovision.x.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + +autoprovision.2.name = +autoprovision.2.code = +autoprovision.2.url = +autoprovision.2.user = +autoprovision.2.password = +autoprovision.2.com_aes = +autoprovision.2.mac_aes = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); +sip.use_23_as_pound = + +#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; +sip.rfc2543_hold = + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +sip.check_autop_result_before_register = + +sip.send_response_by_request = + +#Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default); +sip.notify_reboot_enable = + +#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); +watch_dog.enable = + +#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; +redirect.enable = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled,1-Enabled(default); +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); +transfer.dsskey_deal_type = + +#Enable or disable the conference initiator to transfer the call when hanging up; +#0-Disabled(default),1-Enabled; +transfer.tran_others_after_conf_enable = + +####################################################################################### +## Voice ## +####################################################################################### + +#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; +voice.vad = + +#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); +voice.cng = + +#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); +voice.echo_cancellation = + +#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. +voice.side_tone= + +#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. +#Require reboot; +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); +voice.jib.adaptive = + +#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. +#voice.tone.country = Custom +voice.tone.country = + +#Customize the tone when the "voice.tone.country" is configured as Custom. +#The value format: Frequency/Duration. +#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. +#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). +#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. +#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma. +#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.record= +voice.tone.info = +voice.tone.stutter = +voice.tone.message = +voice.tone.autoanswer = + +#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.spk_vol = +voice.handset.spk_vol = +voice.headset.spk_vol = + +#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.tone_vol = +voice.handset.tone_vol = +voice.headset.tone_vol = + +#Configure the ring volume. It ranges from 0 to 15, the default value is 8. +voice.ring_vol= + +#Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8. +voice.group_spk_vol = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = + +#Define the login username and password of the user, var and administrator. +#If your username is defined as: security.user_name.admin = adminuser. +#and your password must like this: security.user_password = adminuser:adminpassword. +#adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set. +#security.user_name.admin = adminuser +#security.user_password = adminuser:adminpwd +#security.user_name.user = user1 +#security.user_password = user1:user1pwd +#security.user_name.var = varuser +#security.user_password = varuser:adminpwd + +security.user_name.user = +security.user_name.admin = +security.user_name.var = +security.user_password = + +#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; +#Require reboot; +security.var_enable = + +####################################################################################### +## Customize the softkey ## +####################################################################################### +#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Memory Key (For T38G only) ## +####################################################################################### +#X ranges from 1 to 10; +#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. +#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. +#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. +#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. +#memorykey.x.type--Assign the desired feature to the memory key. +#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS +# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL +# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser +# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group +#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#memorykey.x.sub_type = + +# Configure Memory Key1 +memorykey.1.line = +memorykey.1.value = +memorykey.1.pickup_value = +memorykey.1.type = +memorykey.1.xml_phonebook = +memorykey.1.sub_type = + +# Configure Memory Key2 +memorykey.2.line = +memorykey.2.value = +memorykey.2.pickup_value = +memorykey.2.type = +memorykey.2.xml_phonebook = +memorykey.2.sub_type = + +# Configure Memory Key3 +memorykey.3.line = +memorykey.3.value = +memorykey.3.pickup_value = +memorykey.3.type = +memorykey.3.xml_phonebook = +memorykey.3.sub_type = + +# Configure DSS Key4 +memorykey.4.line = +memorykey.4.value = +memorykey.4.pickup_value = +memorykey.4.type = +memorykey.4.xml_phonebook = +memorykey.4.sub_type = + +# Configure Memory Key5 +memorykey.5.line = +memorykey.5.value = +memorykey.5.pickup_value = +memorykey.5.type = +memorykey.5.xml_phonebook = +memorykey.5.sub_type = + +# Configure Memory Key6 +memorykey.6.line = +memorykey.6.value = +memorykey.6.pickup_value = +memorykey.6.type = +memorykey.6.xml_phonebook = +memorykey.6.sub_type = + +# Configure Memory Key7 +memorykey.7.line = +memorykey.7.value = +memorykey.7.pickup_value = +memorykey.7.type = +memorykey.7.xml_phonebook = +memorykey.7.sub_type = + +# Configure Memory Key8 +memorykey.8.line = +memorykey.8.value = +memorykey.8.pickup_value = +memorykey.8.type = +memorykey.8.xml_phonebook = +memorykey.8.sub_type = + +# Configure Memory Key9 +memorykey.9.line = +memorykey.9.value = +memorykey.9.pickup_value = +memorykey.9.type = +memorykey.9.xml_phonebook = +memorykey.9.sub_type = + +# Configure Memory Key10 +memorykey.10.line = +memorykey.10.value = +memorykey.10.pickup_value = +memorykey.10.type = +memorykey.10.xml_phonebook = +memorykey.10.sub_type = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + +#Configure Line Key1 +linekey.1.line = +linekey.1.value = +linekey.1.pickup_value = +linekey.1.type = +linekey.1.xml_phonebook = +linekey.1.label = + +#Configure Line Key2 +linekey.2.line = +linekey.2.value = +linekey.2.pickup_value = +linekey.2.type = +linekey.2.xml_phonebook = +linekey.2.label = + +#Configure Line Key3 +linekey.3.line = +linekey.3.value = +linekey.3.pickup_value = +linekey.3.type = +linekey.3.xml_phonebook = +linekey.3.label = + +#Configure Line Key4 (for T38G only) +linekey.4.line = +linekey.4.value = +linekey.4.pickup_value = +linekey.4.type = +linekey.4.xml_phonebook = +linekey.4.label = + +#Configure Line Key5 (for T38G only) +linekey.5.line = +linekey.5.value = +linekey.5.pickup_value = +linekey.5.type = +linekey.5.xml_phonebook = +linekey.5.label = + +#Configure Line Key6 (for T38G only) +linekey.6.line = +linekey.6.value = +linekey.6.pickup_value = +linekey.6.type = +linekey.6.xml_phonebook = +linekey.6.label = + +########################################################################################## +## Programmable Key (For T38G only) ## +########################################################################################## +#X ranges from 1 to 15. +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook +#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock +#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. +#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. + +#programablekey.x.value = +#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#programablekey.x.history_type = + +#programablekey.x.label--This parameter is only available to the key 1 to key 4. + +programablekey.1.type = +programablekey.1.line = +programablekey.1.value = +programablekey.1.xml_phonebook = +programablekey.1.history_type = +programablekey.1.label = + +########################################################################################## +## Expansion Key Ł¨For T38G onlyŁ© ## +########################################################################################## +#X ranges from 1 to 6, Y ranges from 1 to 39. +#expansion_module.x.key.y.type = 37 (Switch by default) +#expansion_module.x.key.y.line = 0 +#expansion_module.x.key.y.value = +#expansion_module.x.key.y.pickup_value = +#expansion_module.x.key.y.label = + +#Each expansion module1 key1 +expansion_module.1.key.1.type = +expansion_module.1.key.1.line = +expansion_module.1.key.1.value = +expansion_module.1.key.1.pickup_value = +expansion_module.1.key.1.label = + +#Each expansion module1 key2 +expansion_module.1.key.2.type = +expansion_module.1.key.2.line = +expansion_module.1.key.2.value = +expansion_module.1.key.2.pickup_value = +expansion_module.1.key.2.label = + +#Each expansion module2 key1 +expansion_module.2.key.1.type = +expansion_module.2.key.1.line = +expansion_module.2.key.1.value = +expansion_module.2.key.1.pickup_value = +expansion_module.2.key.1.label = + +####################################################################################### +## Automatic Call Distribute ## +####################################################################################### +#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; +acd.auto_available = + +#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. +acd.auto_available_timer = + +####################################################################################### +# Action URL Settings ## +####################################################################################### + +#action_url.setup_completed--Inform the server that the phone has completed the startup. +#action_url.dnd_on-- Inform the server that the DND is activated on the phone. +#The value format is: http://IP address of server/help.xml?variable name=variable value. +#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. +#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. +#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. +#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. +#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. +#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. +#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. +#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac + +action_url.setup_completed = +action_url.log_on = +action_url.log_off = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. +lang.wui = + +#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. +#lang.gui = English +lang.gui = + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = +local_time.ntp_server2 = + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = + +#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. +local_time.offset_time = + +#Configure the time format; 0-12 Hour, 1-24 Hour (default); +local_time.time_format = + +#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; +local_time.date_format = + +#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = + +#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. +local_time.manual_time_enable = + +####################################################################################### +## Hot Desking ## +####################################################################################### +#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; +#hotdesking.startup_register_name_enable = 0 (default) +#hotdesking.startup_username_enable = 1 (default) +#hotdesking.startup_password_enable = 1 (default) +#hotdesking.startup_sip_server_enable = 1 (default) +#hotdesking.startup_outbound_enable = 0 (default) + +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; +#0-Disabled, 1-Enabled; +#hotdesking.dsskey_register_name_enable = 0 (default) +#hotdesking.dsskey_username_enable = 1 (default) +#hotdesking.dsskey_password_enable = 1 (default) +#hotdesking.dsskey_sip_server_enable = 1 (default) +#hotdesking.dsskey_outbound_enable = 0 (default) + +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Distinctive Ring Tones ## +####################################################################################### + +#"X" ranges from 1 to 10; +#Configure the text to map the keywords contained in the "Alert-info" header. +#distinctive_ring_tones.alert_info.X.text = family +distinctive_ring_tones.alert_info.1.text = + +#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. +#distinctive_ring_tones.alert_info.X.ringer = 1 +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Auto Redial ## +####################################################################################### + +#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; +auto_redial.enable = + +#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. +auto_redial.interval = + +#Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10. +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; +zero_touch.enable = + +#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. +zero_touch.wait_time = + +####################################################################################### +## Push XML ## +####################################################################################### + +push_xml.server = + +#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; +push_xml.block_in_calling = + +#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; +push_xml.sip_notify = + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = + +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the dialnow rule. X ranges from 1 to 20. +#dialplan.dialnow.rule.x = +#dialplan.dialnow.line_id.x = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 20. +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## BSFT Phonebook ## +####################################################################################### + +#Configuration of BW phonebook. X ranges from 1 to 6. +#bw_phonebook.data.x.server = +#bw_phonebook.data.x.port = +#bw_phonebook.data.x.username = +#bw_phonebook.data.x.password = +#bw_phonebook.data.x.name = + +bw_phonebook.data.1.server = +bw_phonebook.data.1.port = +bw_phonebook.data.1.username = +bw_phonebook.data.1.password = +bw_phonebook.data.1.name = + +####################################################################################### +## BSFT Call Log ## +####################################################################################### + +#Configuration of the BW call log. X ranges from 1 to 3. +#bw_call_log.data.x.server = +#bw_call_log.data.x.port = +#bw_call_log.data.x.username = +#bw_call_log.data.x.password = +#bw_call_log.data.x.name = + +bw_call_log.data.1.server = +bw_call_log.data.1.port = +bw_call_log.data.1.username = +bw_call_log.data.1.password = +bw_call_log.data.1.name = + +#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; +#0-Disabled (default), 1-Enabled; +#Require reboot; +bw.calllog_and_dir = + +#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); +#Require reboot; +bw.behave_calllog = + +#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); +#Require reboot; +bw.behave_bw_dir = + +#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +####################################################################################### +## Remote phonebook ## +####################################################################################### + +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +#remote_phonebook.data.x.url = +#remote_phonebook.data.x.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +####################################################################################### +## LDAP Settings ## +####################################################################################### +#Configure the search criteria for name and number lookups. +ldap.name_filter = +ldap.number_filter = + +ldap.host = 0.0.0.0 +ldap.port = 389 + +ldap.base = +ldap.user = +ldap.password = + +#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. +ldap.max_hits = + +ldap.name_attr = +ldap.numb_attr = +ldap.display_name = + +#Configure the LDAP version. The valid value is 2 or 3 (default). +ldap.version = + +#Conifugre the search delay time. It ranges from 0 to 2000 (default). +ldap.search_delay = + +#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; +ldap.call_in_lookup = + +#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; +ldap.ldap_sort = + +#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; +ldap.dial_lookup = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 +features.dnd_refuse_code = + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = + +#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; +features.call_completion_enable = + +features.dnd.on_code = +features.dnd.off_code = + +#Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default); +features.dnd.emergency_enable = + +#Specify the emergency number, multiple numbers (at most three) are separated by comma. +features.dnd.emergency_authorized_number = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); +features.intercom.allow = + +#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; +features.intercom.mute = + +#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); +features.intercom.tone = + +#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); +features.intercom.barge = + +#Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled; +features.remote_phonebook.enable = + +#Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600. +features.remote_phonebook.flash_time = + +#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2. +features.hotline_number = +features.hotline_delay = + +#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). +features.dtmf.repetition = + +#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. +features.busy_tone_delay = + +#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; +features.pound_key.mode = + +#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); +features.send_key_tone = +features.key_tone = + +features.redial_tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; +#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); +features.action_uri_limit_ip = + +#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); +features.dsskey_blind_tran = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = + +#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); +#Require reboot; +features.direct_ip_call_enable = + +#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; +features.ringer_device.is_use_headset = + +#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.group_pickup_enable = + +#Configure the group pickup code. +features.pickup.group_pickup_code = + +#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.direct_pickup_enable = + +#Configure the directed pickup code. +features.pickup.direct_pickup_code = + +#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; +#0-Disabled (default), 1-Enabled; +features.pickup.blf_visual_enable = +features.pickup.blf_audio_enable = + +#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle. +#0-Disabled (default), 1-Enabled; +features.blf_and_callpark_idle_led_enable = + +#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. +phone_setting.inter_digit_time = + +#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. +phone_setting.flash_hook_timer = + +#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; +phone_setting.lock = + +#Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10. +phone_setting.phone_lock.unlock_pin = +phone_setting.phone_lock.lock_time_out = + +#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wavˇ­ˇ­Ring8.wav. +#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav +phone_setting.ring_type = + +#Configure the active backlight level. It ranges from 1 to 10, the default value is 2. +#The same level for different phones may result in different backlight intensities. +#The backlight level of T2xP ranges from 1 to 3. +phone_setting.active_backlight_level = + +#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. +phone_setting.inactive_backlight_level = + +#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800. +phone_setting.backlight_time = + +#Configure the phone background. +#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png +#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png +phone_setting.backgrounds = + +#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800. +phone_setting.screen_saver_time = + +#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. +#phone_setting.ring_for_tranfailed = Ring1.wav +phone_setting.ring_for_tranfailed = + +#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; +phone_setting.logon_wizard = + +#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; +phone_setting.predial_autodial = + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = + +#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. +phone_setting.dialnow_delay = + +#Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled; +phone_setting.custom_softkey_enable = + +#Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4; +phone_setting.theme = + +#Configure the emergency number, each separated by comma. The default value is 112,911,110. +phone_setting.emergency.number = + +#Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default); +phone_setting.sms_popup_enable = + +#Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled; +phone_setting.common_power_led_enable = + +#Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled; +phone_setting.mail_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled; +phone_setting.mute_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled; +phone_setting.hold_power_led_flash_enable = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +firmware.url = + +####################################################################################### +## Configure the access URL of the customized ringtones ## +####################################################################################### +ringtone.url = + +#ringtone.delete = http://localhost/all,delete all the customized ring tones. +ringtone.delete = + +####################################################################################### +## Configure the access URL of language file ## +####################################################################################### +gui_lang.url = + +#gui_lang.delete =http://localhost/all, delete all the customized languages. +gui_lang.delete = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate. +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Dialnow Rule/Replace Rule ## +####################################################################################### +local_contact.data.url = +auto_dst.url = +dialplan_dialnow.url = +dialplan_replace_rule.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations. +custom_factory_configuration.url = + +####################################################################################### +## Call List ## +####################################################################################### +#Configure the access URL for downloading the call list. +#Require reboot +call_list.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar. +openvpn.url = + +####################################################################################### +## Configure the access URL of the Wallpaper ## +####################################################################################### +wallpaper_upload.url = + +####################################################################################### +## Configure the access URL of the Screensaver ## +####################################################################################### +#Configure the access URL for downloading the customized wallpaper. +screen_saver.pic.url = + +####################################################################################### +## Configuration files for Var ## +####################################################################################### +#Configure the access URL for downloading the files for var. +#Require reboot +web_item_level.url = + diff --git a/resources/templates/provision/yealink/t20/{$mac}.cfg b/resources/templates/provision/yealink/t20/{$mac}.cfg index b91f5b09e4..ef0849cff9 100644 --- a/resources/templates/provision/yealink/t20/{$mac}.cfg +++ b/resources/templates/provision/yealink/t20/{$mac}.cfg @@ -1,933 +1,1887 @@ -# Yealink provisioning documentation, as of 2010-10-24, is at: -# http://www.yealink.com/fae/Auto%20Provision%20Manual.rar - -[ account ] -path = /config/voip/sipAccount0.cfg -Enable = 1 -Label = {$display_name_1} -DisplayName = {$display_name_1} -AuthName = {$user_id_1} -UserName = {$user_id_1} -password = {$user_password_1} -SIPServerHost = {$server_address_1} -SIPServerPort = 5060 -UseOutboundProxy = 1 -OutboundHost = {$outbound_proxy_1} -OutboundPort = 5060 -Transport = 0 -BakOutboundHost = {$server_address_1} -BakOutboundPort = 5060 -proxy-require = -AnonymousCall = 0 -RejectAnonymousCall = 0 -Expire = 3600 -SIPListenPort = 5060 -Enable 100Rel = 0 -precondition = 0 -SubsribeRegister = 0 -SubsribeMWI = 0 -CIDSource = 0 -EnableSessionTimer = 0 -SessionExpires = -SessionRefresher = 0 -EnableUserEqualPhone = 0 -srtp_encryption = 0 -ptime = 20 -ShareLine = -dialoginfo_callpickup = -MissedCallLog = 1 -AutoAnswer = 0 -AnonymousCall_OnCode = -AnonymousCall_OffCode = -AnonymousReject_OnCode = -AnonymousReject_OffCode = -BLANumber = -conf-type = 0 -conf-uri = - - -[ DTMF ] -path = /config/voip/sipAccount0.cfg -DTMFInbandTransfer = 1 -InfoType = 0 -DTMFPayload = 101 - -[ NAT ] -path = /config/voip/sipAccount0.cfg -NATTraversal = 1 -STUNServer = stun01.sipphone.com -STUNPort = 3478 -EnableUDPUpdate = 1 -UDPUpdateTime = 30 -rport = 0 - -[ ADVANCED ] -path = /config/voip/sipAccount0.cfg -default_t1 = 0.5 -default_t2 = 4 -default_t4 = 5 - -[blf] -path = /config/voip/sipAccount0.cfg -SubscribePeriod = 1800 -BLFList_URI = - -[ audio0 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = PCMU -priority = 1 -rtpmap = 0 - -[ audio1 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = PCMA -priority = 2 -rtpmap = 8 - -[ audio2 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G723_53 -priority = 0 -rtpmap = 4 - -[ audio3 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G723_63 -priority = 0 -rtpmap = 4 - -[ audio4 ] -path = /config/voip/sipAccount0.cfg -enable = 1 -PayloadType = G729 -priority = 3 -rtpmap = 18 - - -[ audio5 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G722 -priority = 4 -rtpmap = 9 - -[ audio7 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G726-16 -priority = 0 -rtpmap = 112 - -[ audio8 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G726-24 -priority = 0 -rtpmap = 102 - -[ audio9 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G726-32 -priority = 0 -rtpmap = 2 - -[ audio10 ] -path = /config/voip/sipAccount0.cfg -enable = 0 -PayloadType = G726-40 -priority = 0 -rtpmap = 104 - -[ HotDesking ] -path = /config/voip/sipAccount0.cfg -IsHotDeskAccount = 0 - -[ RingTone ] -path = /config/voip/sipAccount0.cfg -RingType = commom - -[ WAN ] -path = /config/Network/Network.cfg -#WANType:0:DHCP,1:PPPoE,2:StaticIP -WANType = 0 -WANStaticIP = -WANSubnetMask = -WANDefaultGateway = - -[ DNS ] -path = /config/Network/Network.cfg -PrimaryDNS = -SecondaryDNS = - -[ PPPoE ] -path = /config/Network/Network.cfg -PPPoEUser = -PPPoEPWD = - -[ LAN ] -path = /config/Network/Network.cfg -#LANTYPE:0:Router, 1:Bridge -LANTYPE = 1 -RouterIP = 10.0.0.1 -LANSubnetMask = 255.255.255.0 -EnableDHCP = 1 -DHCPStartIP = 10.0.0.10 -DHCPEndIP = 10.0.0.100 - -[ VLAN ] -path = /config/Network/Network.cfg -#ISVLAN,VID and USRPRIORITY are used for VLAN on LAN port -#PC_PORT_VLAN_ENABLE,PC_PORT_VID and PC_PORT_PRIORITY are used for PC port -ISVLAN = 0 -VID = 0 -USRPRIORITY = 0 -PC_PORT_VLAN_ENABLE = 0 -PC_PORT_VID = 0 -PC_PORT_PRIORITY = 0 - -[ QOS ] -path = /config/Network/Network.cfg -SIGNALTOS = 40 -RTPTOS = 40 - -[ RTPPORT ] -path = /config/Network/Network.cfg -MaxRTPPort = 11800 -MinRTPPort = 11780 - -[ SYSLOG ] -path = /config/Network/Network.cfg -#specify the server for syslog storage -SyslogdIP = - -[ 802.1X ] -path = /config/Network/Network.cfg -Mode = 0 -Identity = -MD5Passwd = - -[ VPN ] -path = /config/Network/Network.cfg -EnableVPN =0 - -[ Ethernet ] -path = /config/Network/Network.cfg -WANPortLink = 0 -PCPortLink = 0 - -[ Lang ] -path = /config/Setting/Setting.cfg -#WebLanguage is the setting of language on web management -WebLanguage = - -[ Time ] -path = /config/Setting/Setting.cfg -TimeZone = -7 -TimeZoneName= Mexico(Mazatlan,Chihuahua) -TimeServer1 = cn.pool.ntp.org -TimeServer2 = cn.pool.ntp.org -Interval = 1000 -#Set daylight saving time.SummerTime 0 means disable,1 means enable, 2 means automatic -SummerTime = 2 -StartTime = -EndTime = -TimeFormat = -DateFormat = -OffSetTime = -DSTTimeType = - -[ PhoneSetting ] -path = /config/Setting/Setting.cfg -InterDigitTime = 4 -FlashHookTimer = 1 -Lock = 0 -Ringtype = Ring1.wav -BackLight = 2 -BacklightTime = 30 -ProductName = -Contrast = -HandFreeSpkVol = 8 -HandFreeMicVol = 8 -HandSetSpkVol = 8 -HandSetMicVol = 8 -HeadSetSpkVol = 8 -HeadSetMicVol = 8 -RingVol= 8 -RingForTranFailed = Ring1.wav -LogonWizard = 0 -PreDialAutoDial = 0 -IsDeal180 = 0 - -[ SignalToneVol ] -path = /config/Setting/Setting.cfg -Handset = 8 -Headset = 8 -Handfree = 8 - -[ AlertInfo0 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo1 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo2 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo3 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo4 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo5 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo6 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo7 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo8 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlertInfo9 ] -path = /config/Setting/Setting.cfg -Text = -Ringer = - -[ AlwaysFWD ] -path = /config/Features/Forward.cfg -Enable = 0 -Target = -On_Code = -Off_Code = - -[ BusyFWD ] -path = /config/Features/Forward.cfg -Enable = 0 -Target = -On_Code = -Off_Code = - -[ TimeoutFWD ] -path = /config/Features/Forward.cfg -Enable = 0 -Target = -Timeout = 10 -On_Code = -Off_Code = - -[ Features ] -path = /config/Features/Phone.cfg -Call_Waiting = 1 -Hotlinenumber = -BusyToneDelay = -LCD_Logo = -DND_Code = -Refuse_Code = -DND_On_Code = -DND_Off_Code = -ButtonSoundOn = 1 -CallCompletion = 0 -AllowIntercom = 1 -IntercomMute = 1 -IntercomTone = 1 -IntercomBarge = 1 -Call_WaitingTone = 1 -Hotlinedelay = 4 -SendKeySoundOn = 1 -BroadsoftFeatureKeySync = 0 - -[ Trans ] -path = /config/Features/Phone.cfg -IsOnHookTrans = 1 - -[ AutoRedial ] -path = /config/Features/Phone.cfg -EnableRedial = 0 -RedialInterval = 10 -RedialTimes = 10 - -[ PoundSend ] -path = /config/Features/Phone.cfg -#Set # key or * key as send. #:1 and *:2 -Enable = 1 - -[ Emergency ] -path = /config/Features/Phone.cfg -Num = - -[ SoftKey ] -path = /config/Setting/UserSpecific.cfg -IsDefineKey = 0 - -[ memory1 ] -path = /config/vpPhone/vpPhone.ini -#Line means the line taken in use.0 stands for auto,1 stands for line1...except for one condition when type is blf(DKtype:16),0 stands for line1,1 stands for line2... -#DKtype defines the type of the key,ranging from 0 to 17 -#DKtype 0:N/A 1:Conference 2:Forward 3:Transfer -#DKtype 4:Hold 5:DND 6:Redial 7:Call Return -#DKtype 8:SMS 9:Call Pickup 10:Call Park 11:DTMF -#DKtype 12:Voicemail 13:SpeedDial 14:Intercom 15:Line(for line key only) -#DKtype 16:BLF 17:URL 18:Group Listening 19:Public Hold -#DKtype 20:Private Hold 21:Shared Line 22:XML PhoneBook 23:Group Pickup -#DKtype 24:Paging 25:Record 35: URL Record 27:XMLbrowser -#DKtype 34:Hot Desking 38:LDAP 39:BLF List 40:Prefix - - -#Set Memory key1 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory2 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key2 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory3 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key3 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory4 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key4 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory5 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key5 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory6 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key6 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory7 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key7 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory8 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key8 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory9 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key9 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory10 ] -path = /config/vpPhone/vpPhone.ini -#Set Memory key10 -Line = -Value = -type = -PickupValue = -DKtype = - -[ memory11 ] -path = /config/vpPhone/vpPhone.ini -#from memory11 to memory 16 are settings for 6 line keys of T28 -#DKtype value is the same as it is defined for memory keys.Except for one that the line keys cannot be set to blf(DKtype:16). -#Set line key1 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[ memory12 ] -path = /config/vpPhone/vpPhone.ini -#Set line key2 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[ memory13 ] -path = /config/vpPhone/vpPhone.ini -#Set line key3 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[ memory14 ] -path = /config/vpPhone/vpPhone.ini -#Set line key4 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[ memory15 ] -path = /config/vpPhone/vpPhone.ini -#Set line key5 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[ memory16 ] -path = /config/vpPhone/vpPhone.ini -#Set line key6 -Line = -Value = -type = -PickupValue = -DKtype = -Label = - -[programablekey1] -path = /config/vpPhone/vpPhone.ini - -#DKtype 0:N/A 2:Forward 5:DND 6:Redial -#DKtype 7:Call Return 8:SMS 9:Call Pickup 22:XML Phone Book -#DKtype 28:Call List 29:Directory 30:Menu 31:Switch Account -#DKtype 32:New SMS 33:Status - - -#Set SoftKey1 -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey2] -path = /config/vpPhone/vpPhone.ini -#Set SoftKey2 -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey3] -path = /config/vpPhone/vpPhone.ini -#Set SoftKey3 -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey4] -path = /config/vpPhone/vpPhone.ini -#Set SoftKey4 -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey5] -path = /config/vpPhone/vpPhone.ini -#Set Up key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey6] -path = /config/vpPhone/vpPhone.ini -#Set Down key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey7] -path = /config/vpPhone/vpPhone.ini -#Set Left key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey8] -path = /config/vpPhone/vpPhone.ini -#Set Right key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey9] -path = /config/vpPhone/vpPhone.ini -#Set OK key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey10] -path = /config/vpPhone/vpPhone.ini -#Set Cancel key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey11] -path = /config/vpPhone/vpPhone.ini -#Set CONF key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey12] -path = /config/vpPhone/vpPhone.ini -#Set HOLD key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey13] -path = /config/vpPhone/vpPhone.ini -#Set MUTE key -DKtype = -Line = -Value = -XMLPhoneBook = - -[programablekey14] -path = /config/vpPhone/vpPhone.ini -#Set TRAN key -DKtype = -Line = -Value = -XMLPhoneBook = - -[ Profile ] -path = /config/vpm.cfg -VAD = 0 -CNG = 1 -ECHO = 1 -SIDE_TONE = -3 - -[ Jitter ] -path = /config/vpm.cfg -Adaptive = 1 -Min = 0 -Max = 300 -Nominal = 120 - -[ Message ] -path = /config/Features/Message.cfg -#Set voicemail number for each account -VoiceNumber0 = -VoiceNumber1 = -VoiceNumber2 = -VoiceNumber3 = -VoiceNumber4 = -VoiceNumber5 = - -[ Country ] -path = /config/voip/tone.ini -#The tones are defined by countries.If Country = Custom,the customized values will be used. -Country = - -[ Tone Param ] -path = /config/voip/tone.ini -dial = -ring = -busy = -congestion = -callwaiting = -dialrecall = -record = -info = -stutter = -message = -autoanswer = - -[ Default ] -path = /config/voip/tone.ini -dial = 1 -ring = 1 -busy = 1 -congestion = 1 -callwaiting = 1 -dialrecall = 1 -record = 1 -info = 1 -stutter = 1 -message = 1 -autoanswer = 1 - -[ AreaCode ] -path = /config/DialRule/areacode.cfg -code = -minlen = -maxlen = - -[ BlockOut ] -path = /config/DialRule/BlockOut.cfg -#Set Block Out number. -1 = -2 = -3 = -4 = -5 = -6 = -7 = -8 = -9 = -10 = - -[ RemotePhoneBook0 ] -path = /config/Setting/Setting.cfg -URL = -Name = - -[ RemotePhoneBook1 ] -path = /config/Setting/Setting.cfg -URL = -Name = - -[ RemotePhoneBook2 ] -path = /config/Setting/Setting.cfg -URL = -Name = - -[ RemotePhoneBook3 ] -path = /config/Setting/Setting.cfg -URL = -Name = - -[ RemotePhoneBook4 ] -path = /config/Setting/Setting.cfg -URL = -Name = - -[ Webserver Type ] -path = /config/Advanced/Advanced.cfg -WebType = - -[ Key0 ] -Path = /config/vpPhone/Ext38_00000000000001.cfg -DKtype = -Line = -Value = -type = -PickupValue = -Label = - -[ Key1 ] -Path = /config/vpPhone/Ext38_00000000000001.cfg -DKtype = -Line = -Value = -type = -PickupValue = -Label = - -[ Key0 ] -Path = /config/vpPhone/Ext38_00000000000002.cfg -DKtype = -Line = -Value = -type = -PickupValue = -Label = - -[ Key1 ] -Path = /config/vpPhone/Ext38_00000000000002.cfg -DKtype = -Line = -Value = -type = -PickupValue = -Label = - -[ FactoryConfig ] -path = /config/Setting/AdvSetting.cfg -CustomEnabled = 0 - -[ LDAP ] -Path = /config/Contacts/LDAP.cfg -NameFilter= -NumberFilter= -host= 0.0.0.0 -port= 389 -base= -user= -pswd= -MaxHits= 50 -NameAttr= -NumbAttr= -DisplayName= -version= 3 -SearchDelay= 0 -CallInLookup= 1 -LDAPSort= 1 -DialLookup= 0 - -#------------------------------------------------------------------------------------------------ -#T20 config -#------------------------------------------------------------------------------------------------ - -[ autop_mode ] -path = /config/Setting/autop.cfg -mode = 6 -schedule_min = 60 -schedule_time = -schedule_time_end = -schedule_dayofweek = 0123456 - -[ PNP ] -path = /config/Setting/autop.cfg -Pnp = 0 - -[ cutom_option ] -path = /config/Setting/autop.cfg -cutom_option_code0 = -cutom_option_type0 = 1 - -[ autoprovision ] -path = /config/Setting/autop.cfg -server_address = -user = -password = - -[ AES_KEY ] -path = /config/Setting/autop.cfg -aes_key_16 = -aes_key_16_mac = - -[ ringtone ] -path = /tmp/download.cfg -server_address = - -[ Lang ] -path = /tmp/download.cfg -server_address = - -[ ContactList ] -path = /tmp/download.cfg -server_address = - -[ UserName ] -path = /config/Advanced/Advanced.cfg -admin = -user = - -[ AdminPassword ] -path = /config/Setting/autop.cfg -password = s0p0rt343r30 - -[ UserPassword ] -path = /config/Setting/autop.cfg -password = - -[ firmware ] -path = /tmp/download.cfg -server_type = -server_ip = -server_port = -login_name = -login_pswd = -http_url = -firmware_name = - -[ DialNow ] -path = /tmp/dialnow.xml -1 = -2 = -3 = -4 = -5 = -6 = -7 = -8 = -9 = -10 = -11 = -12 = -13 = -14 = -15 = -16 = -17 = -18 = -19 = -20 = - -[ ReplaceRule ] -path = /config/Setting/AdvSetting.cfg -ReplaceAll = - -[ Forbidden ] -path = /config/Setting/AdvSetting.cfg -DND = 1 -FWD = 2 \ No newline at end of file +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.1.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$user_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = {$sip_port_1} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.1.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + +#Configure the voice mail number of account 1. +voice_mail.number.1 = *97 + +#Configure the proxy server to account 1. +account.1.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.1.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = {$register_expires_1} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.1.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.1.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Assign account 1 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.1.shared_line = + +#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.1.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.1.group_pickup_code = +account.1.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.1.blf_list_code = + +#Configure the bargein code. +account.1.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.1.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.1.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.1.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.1.idle_screen_enable = + +#Define the access URL of the customized theme. +account.1.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.1.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = + +#Configure the STUN server address. +account.1.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.1.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.1.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.1.picture_info_enable = + +#Audio codecs for account 1 (Y ranges from 1 to 13). +#account.1.codec.y.enable = +#account.1.codec.y.payload_type = +#account.1.codec.y.priority = +#account.1.codec.y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =4 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = +account.1.codec.7.payload_type = +account.1.codec.7.priority = +account.1.codec.7.rtpmap = + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = G726-16 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 112 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = G726-24 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 102 + +account.1.codec.10.enable = 0 +account.1.codec.10.payload_type = G726-32 +account.1.codec.10.priority = 0 +account.1.codec.10.rtpmap = 2 + +account.1.codec.11.enable = 0 +account.1.codec.11.payload_type = G726-40 +account.1.codec.11.priority = 0 +account.1.codec.11.rtpmap = 104 + +account.1.codec.12.enable = 0 +account.1.codec.12.payload_type = iLBC_13_3 +account.1.codec.12.priority = 0 +account.1.codec.12.rtpmap = 97 + +account.1.codec.13.enable = 0 +account.1.codec.13.payload_type = iLBC_15_2 +account.1.codec.13.priority = 0 +account.1.codec.13.rtpmap = 97 + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 2; 0-Disabled (default), 1-Enabled; +account.2.enable = 1 + +#Configure the label displayed on the LCD screen for account 2. +account.2.label = {$display_name_2} + +#Configure the display name of account 2. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$user_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = {$sip_port_2} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.2.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = {$outbound_proxy_2} + +#Specify the server port, the default value is 5060. +account.2.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + +#Configure the voice mail number of account 2. +voice_mail.number.2 = *97 + +#Configure the proxy server to account 2. +account.2.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.2.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 2, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = {$register_expires_2} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.2.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.2.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.2.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Assign account 2 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.2.shared_line = + +#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.2.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 2, the settings on a per-account basis take precedence over the settings on the phone. +account.2.group_pickup_code = +account.2.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.2.blf_list_code = + +#Configure the bargein code. +account.2.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.2.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.2.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.2.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.2.idle_screen_enable = + +#Define the access URL of the customized theme. +account.2.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.2.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = + +#Configure the STUN server address. +account.2.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.2.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.2.picture_info_enable = + +#Audio codecs for account 2 (Y ranges from 1 to 13). +#account.2.codec.Y.enable = +#account.2.codec.Y.payload_type = +#account.2.codec.Y.priority = +#account.2.codec.Y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =4 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = +account.2.codec.7.payload_type = +account.2.codec.7.priority = +account.2.codec.7.rtpmap = + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = G726-16 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 112 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = G726-24 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 102 + +account.2.codec.10.enable = 0 +account.2.codec.10.payload_type = G726-32 +account.2.codec.10.priority = 0 +account.2.codec.10.rtpmap = 2 + +account.2.codec.11.enable = 0 +account.2.codec.11.payload_type = G726-40 +account.2.codec.11.priority = 0 +account.2.codec.11.rtpmap = 104 + +account.2.codec.12.enable = 0 +account.2.codec.12.payload_type = iLBC_13_3 +account.2.codec.12.priority = 0 +account.2.codec.12.rtpmap = 97 + +account.2.codec.13.enable = 0 +account.2.codec.13.payload_type = iLBC_15_2 +account.2.codec.13.priority = 0 +account.2.codec.13.rtpmap = 97 + +####################################################################################### +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 3; 0-Disabled (default), 1-Enabled; +account.3.enable = + +#Configure the label displayed on the LCD screen for account 3. +account.3.label = {$display_name_3} + +#Configure the display name of account 3. +account.3.display_name = {$display_name_3} + +#Configure the username and password for register authentication. +account.3.auth_name = {$user_id_3} +account.3.password = {$user_password_3} + +#Configure the register user name. +account.3.user_name = {$user_id_3} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.3.sip_server_host = {$server_address_3} + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = {$sip_port_3} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.3.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = {$outbound_proxy_3} + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + +#Configure the voice mail number of account 3. +voice_mail.number.3 = + +#Configure the proxy server to account 3. +account.3.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.3.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 3, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = {$register_expires_3} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.3.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.3.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.3.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Assign account 3 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.3.shared_line = + +#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.3.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 3, the settings on a per-account basis take precedence over the settings on the phone. +account.3.group_pickup_code = +account.3.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.3.blf_list_code = + +#Configure the bargein code. +account.3.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.3.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.3.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.3.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.3.idle_screen_enable = + +#Define the access URL of the customized theme. +account.3.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.3.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = + +#Configure the STUN server address. +account.3.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.3.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.3.picture_info_enable = + +#Audio codecs for account 3 (Y ranges from 1 to 13). +#account.3.codec.Y.enable = +#account.3.codec.Y.payload_type = +#account.3.codec.Y.priority = +#account.3.codec.Y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =4 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = +account.3.codec.7.payload_type = +account.3.codec.7.priority = +account.3.codec.7.rtpmap = + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = G726-16 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 112 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = G726-24 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 102 + +account.3.codec.10.enable = 0 +account.3.codec.10.payload_type = G726-32 +account.3.codec.10.priority = 0 +account.3.codec.10.rtpmap = 2 + +account.3.codec.11.enable = 0 +account.3.codec.11.payload_type = G726-40 +account.3.codec.11.priority = 0 +account.3.codec.11.rtpmap = 104 + +account.3.codec.12.enable = 0 +account.3.codec.12.payload_type = iLBC_13_3 +account.3.codec.12.priority = 0 +account.3.codec.12.rtpmap = 97 + +account.3.codec.13.enable = 0 +account.3.codec.13.payload_type = iLBC_15_2 +account.3.codec.13.priority = 0 +account.3.codec.13.rtpmap = 97 + +####################################################################################### +## Account4 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 4; 0-Disabled (default), 1-Enabled; +account.4.enable = + +#Configure the label displayed on the LCD screen for account 4. +account.4.label = {$display_name_4} + +#Configure the display name of account 4. +account.4.display_name = {$display_name_4} + +#Configure the username and password for register authentication. +account.4.auth_name = {$user_id_4} +account.4.password = {$user_password_4} + +#Configure the register user name. +account.4.user_name = {$user_id_4} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.4.sip_server_host = {$server_address_4} + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = {$sip_port_4} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.4.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = {$outbound_proxy_4} + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4== 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + +#Configure the voice mail number of account 4. +voice_mail.number.4 = + +#Configure the proxy server to account 4. +account.4.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.4.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 4, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = {$register_expires_4} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.4.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.4.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Assign account 4 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.4.shared_line = + +#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.4.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 4, the settings on a per-account basis take precedence over the settings on the phone. +account.4.group_pickup_code = +account.4.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.4.blf_list_code = + +#Configure the bargein code. +account.4.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.4.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.4.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.4.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.4.idle_screen_enable = + +#Define the access URL of the customized theme. +account.4.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.4.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = + +#Configure the STUN server address. +account.4.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + +#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.4.ringtone.ring_type = + +#Enable or disable the phone to download the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Audio codecs for account 4 (Y ranges from 1 to 13). +#account.4.codec.Y.enable = +#account.4.codec.Y.payload_type = +#account.4.codec.Y.priority = +#account.4.codec.Y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =4 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = +account.4.codec.7.payload_type = +account.4.codec.7.priority = +account.4.codec.7.rtpmap = + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = G726-16 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 112 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = G726-24 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 102 + +account.4.codec.10.enable = 0 +account.4.codec.10.payload_type = G726-32 +account.4.codec.10.priority = 0 +account.4.codec.10.rtpmap = 2 + +account.4.codec.11.enable = 0 +account.4.codec.11.payload_type = G726-40 +account.4.codec.11.priority = 0 +account.4.codec.11.rtpmap = 104 + +account.4.codec.12.enable = 0 +account.4.codec.12.payload_type = iLBC_13_3 +account.4.codec.12.priority = 0 +account.4.codec.12.rtpmap = 97 + +account.4.codec.13.enable = 0 +account.4.codec.13.payload_type = iLBC_15_2 +account.4.codec.13.priority = 0 +account.4.codec.13.rtpmap = 97 + +####################################################################################### +## Account5 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 5; 0-Disabled (default), 1-Enabled; +account.5.enable = + +#Configure the label displayed on the LCD screen for account 5. +account.5.label = {$display_name_5} + +#Configure the display name of account 5. +account.5.display_name = {$display_name_5} + +#Configure the username and password for register authentication. +account.5.auth_name = {$user_id_5} +account.5.password = {$user_password_5} + +#Configure the register user name. +account.5.user_name = {$user_id_5} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.5.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.5.sip_server_host = {$server_address_5} + +#Specify the port for the SIP server. The default value is 5060. +account.5.sip_server_port = {$sip_port_5} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.5.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.5.outbound_host = {$outbound_proxy_5} + +#Specify the server port, the default value is 5060. +account.5.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.5.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.5.backup_outbound_port = + +#Configure the voice mail number of account 5. +voice_mail.number.5 = + +#Configure the proxy server to account 5. +account.5.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.5.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.5.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +#Configure the SIP port for account 5, the default value is 5060. +account.5.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.expires = {$register_expires_5} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.5.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.5.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.5.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.5.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.5.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + +#Assign account 5 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.5.shared_line = + +#Configure BLA number for account 5 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.5.bla_number = +account.5.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.5.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 5, the settings on a per-account basis take precedence over the settings on the phone. +account.5.group_pickup_code = +account.5.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.5.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.5.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 5 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.5.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.5.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.5.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.5.blf_list_code = + +#Configure the bargein code. +account.5.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.5.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.5.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.5.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.5.idle_screen_enable = + +#Define the access URL of the customized theme. +account.5.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.5.enable_signal_encode = + +#Configure the key for encoding. +account.5.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.5.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.5.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = + +#Configure the STUN server address. +account.5.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.5.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.5.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.5.advanced.timer_t1 = +account.5.advanced.timer_t2 = +account.5.advanced.timer_t4 = + +#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.5.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.5.picture_info_enable = + +#Audio codecs for account5 (Y ranges from 1 to 13). +#account.5.codec.Y.enable = +#account.5.codec.Y.payload_type = +#account.5.codec.Y.priority = +#account.5.codec.Y.rtpmap = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =4 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = +account.5.codec.7.payload_type = +account.5.codec.7.priority = +account.5.codec.7.rtpmap = + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = G726-16 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 112 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = G726-24 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 102 + +account.5.codec.10.enable = 0 +account.5.codec.10.payload_type = G726-32 +account.5.codec.10.priority = 0 +account.5.codec.10.rtpmap = 2 + +account.5.codec.11.enable = 0 +account.5.codec.11.payload_type = G726-40 +account.5.codec.11.priority = 0 +account.5.codec.11.rtpmap = 104 + +account.5.codec.12.enable = 0 +account.5.codec.12.payload_type = iLBC_13_3 +account.5.codec.12.priority = 0 +account.5.codec.12.rtpmap = 97 + +account.5.codec.13.enable = 0 +account.5.codec.13.payload_type = iLBC_15_2 +account.5.codec.13.priority = 0 +account.5.codec.13.rtpmap = 97 + +####################################################################################### +## Account6 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 6; 0-Disabled (default), 1-Enabled; +account.6.enable = + +#Configure the label displayed on the LCD screen for account 6. +account.6.label = {$display_name_6} + +#Configure the display name of account 6. +account.6.display_name = {$display_name_6} + +#Configure the username and password for register authentication. +account.6.auth_name = {$user_id_6} +account.6.password = {$user_id_6} + +#Configure the register user name. +account.6.user_name = {$user_id_6} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.6.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.6.sip_server_host = {$server_address_6} + +#Specify the port for the SIP server. The default value is 5060. +account.6.sip_server_port = {$sip_port_6} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.6.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.6.outbound_host = {$outbound_proxy_6} + +#Specify the server port, the default value is 5060. +account.6.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.6.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.6.backup_outbound_port = + +#Configure the voice mail number of account 6. +voice_mail.number.6 = + +#Configure the proxy server to account 6. +account.6.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.6.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.6.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = + +#Configure the SIP port for account 6, the default value is 5060. +account.6.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.6.expires = {$register_expires_6} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.6.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.6.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.6.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.6.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.6.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.6.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.6.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.6.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.6.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.6.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.6.ptime = + +#Assign account 6 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.6.shared_line = + +#Configure BLA number for account 6 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.6.bla_number = +account.6.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.6.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 6, the settings on a per-account basis take precedence over the settings on the phone. +account.6.group_pickup_code = +account.6.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.6.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.6.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.6.register_mac = +account.6.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 6 fails to register. It ranges from 0 to 1800, the default value is 30. +account.6.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.6.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.6.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.6.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.6.blf_list_code = + +#Configure the bargein code. +account.6.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.6.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.6.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.6.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.6.idle_screen_enable = + +#Define the access URL of the customized theme. +account.6.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.6.enable_signal_encode = + +#Configure the key for encoding. +account.6.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.6.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.6.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.6.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.6.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.6.nat.nat_traversal = + +#Configure the STUN server address. +account.6.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.6.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.6.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.6.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.6.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.6.advanced.timer_t1 = +account.6.advanced.timer_t2 = +account.6.advanced.timer_t4 = + +#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.6.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.6.picture_info_enable = + +#Audio codecs for account6 (Y ranges from 1 to 13). +#account.6.codec.Y.enable = +#account.6.codec.Y.payload_type = +#account.6.codec.Y.priority = +#account.6.codec.Y.rtpmap = + +account.6.codec.1.enable = 1 +account.6.codec.1.payload_type = PCMU +account.6.codec.1.priority = 1 +account.6.codec.1.rtpmap = 0 + +account.6.codec.2.enable = 1 +account.6.codec.2.payload_type = PCMA +account.6.codec.2.priority = 2 +account.6.codec.2.rtpmap = 8 + +account.6.codec.3.enable = 0 +account.6.codec.3.payload_type = G723_53 +account.6.codec.3.priority =4 +account.6.codec.3.rtpmap = 4 + +account.6.codec.4.enable = 0 +account.6.codec.4.payload_type = G723_63 +account.6.codec.4.priority = 0 +account.6.codec.4.rtpmap = 4 + +account.6.codec.5.enable = 1 +account.6.codec.5.payload_type = G729 +account.6.codec.5.priority = 3 +account.6.codec.5.rtpmap = 18 + +account.6.codec.6.enable = 1 +account.6.codec.6.payload_type = G722 +account.6.codec.6.priority = 4 +account.6.codec.6.rtpmap = 9 + +account.6.codec.7.enable = +account.6.codec.7.payload_type = +account.6.codec.7.priority = +account.6.codec.7.rtpmap = + +account.6.codec.8.enable = 0 +account.6.codec.8.payload_type = G726-16 +account.6.codec.8.priority = 0 +account.6.codec.8.rtpmap = 112 + +account.6.codec.9.enable = 0 +account.6.codec.9.payload_type = G726-24 +account.6.codec.9.priority = 0 +account.6.codec.9.rtpmap = 102 + +account.6.codec.10.enable = 0 +account.6.codec.10.payload_type = G726-32 +account.6.codec.10.priority = 0 +account.6.codec.10.rtpmap = 2 + +account.6.codec.11.enable = 0 +account.6.codec.11.payload_type = G726-40 +account.6.codec.11.priority = 0 +account.6.codec.11.rtpmap = 104 + +account.6.codec.12.enable = 0 +account.6.codec.12.payload_type = iLBC_13_3 +account.6.codec.12.priority = 0 +account.6.codec.12.rtpmap = 97 + +account.6.codec.13.enable = 0 +account.6.codec.13.payload_type = iLBC_15_2 +account.6.codec.13.priority = 0 +account.6.codec.13.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### + +#Enable or disable the always forward; 0-Disabled (default), 1-Enabled; +forward.always.enable = + +#Configure the target number that the phone will forward the call to. +forward.always.target = + +#Configure the on code and off code to always forward. +forward.always.on_code = +forward.always.off_code = + +#Enable or disable the busy forward; 0-Disabled (default), 1-Enabled; +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10. +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; +forward.international.enable = diff --git a/resources/templates/provision/yealink/t22/y000000000022cfg b/resources/templates/provision/yealink/t22/y000000000022cfg new file mode 100644 index 0000000000..fbdda984d6 --- /dev/null +++ b/resources/templates/provision/yealink/t22/y000000000022cfg @@ -0,0 +1,1215 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server. +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Configure the PC port type; 0-Router, 1-Bridge (default); +#Require reboot; +network.bridge_mode = + +#Configure the IP address and mask when the PC port is configured as Router. +#Require reboot; +network.pc_port.ip = +network.pc_port.mask = + +#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.pc_port.dhcp_server = + +#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. +network.dhcp.start_ip = +network.dhcp.end_ip = + +#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.pc_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.pc_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.pc_port_priority = + +#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only; +#Require reboot; +network.web_server_type = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120. +#Require reboot; +network.lldp.packet_interval = + +#Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.static_dns_enable = + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the IP address of the syslog server. +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## TR069 ## +####################################################################################### + +#The TR069 feature is only applicable to some designated firmware versions. +#All settings of TR069 require reboot. +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; +managementserver.enable = + +#Configure the username and password for the phone to authenticate with the ACS. +managementserver.username = +managementserver.password = + +#Configure the access URL of the ACS. +managementserver.url = + +#Configure the username and password for the phone to authenticate the connection requests. +managementserver.connection_request_username = +managementserver.connection_request_password = + +#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; +managementserver.periodic_inform_enable = + +#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. +managementserver.periodic_inform_interval = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); +auto_provision.pnp_enable = + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enable = + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly; +#auto_provision.weekly.mask = 0123456 +#auto_provision.weekly.begin_time = 00:00 +#auto_provision.weekly.end_time = 00:00 + +auto_provision.weekly.mask = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Configure the username and password for downloading. +auto_provision.server.username = +auto_provision.server.password = + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_option.enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. +#Require reboot; +#"X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.name = + +#Configure the auto provisioning code. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.x.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.user = +#autoprovision.x.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.x.com_aes = +#autoprovision.x.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + +autoprovision.2.name = +autoprovision.2.code = +autoprovision.2.url = +autoprovision.2.user = +autoprovision.2.password = +autoprovision.2.com_aes = +autoprovision.2.mac_aes = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); +sip.use_23_as_pound = + +#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; +sip.rfc2543_hold = + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +sip.check_autop_result_before_register = + +sip.send_response_by_request = + +#Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default); +sip.notify_reboot_enable = + +#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); +watch_dog.enable = + +#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; +redirect.enable = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled,1-Enabled(default); +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); +transfer.dsskey_deal_type = + +#Enable or disable the conference initiator to transfer the call when hanging up; +#0-Disabled(default),1-Enabled; +transfer.tran_others_after_conf_enable = + +####################################################################################### +## Voice ## +####################################################################################### + +#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; +voice.vad = + +#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); +voice.cng = + +#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); +voice.echo_cancellation = + +#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. +voice.side_tone= + +#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. +#Require reboot; +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); +voice.jib.adaptive = + +#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. +#voice.tone.country = Custom +voice.tone.country = + +#Customize the tone when the "voice.tone.country" is configured as Custom. +#The value format: Frequency/Duration. +#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. +#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). +#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. +#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma. +#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.record= +voice.tone.info = +voice.tone.stutter = +voice.tone.message = +voice.tone.autoanswer = + +#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.spk_vol = +voice.handset.spk_vol = +voice.headset.spk_vol = + +#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.tone_vol = +voice.handset.tone_vol = +voice.headset.tone_vol = + +#Configure the ring volume. It ranges from 0 to 15, the default value is 8. +voice.ring_vol= + +#Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8. +voice.group_spk_vol = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = + +#Define the login username and password of the user, var and administrator. +#If your username is defined as: security.user_name.admin = adminuser. +#and your password must like this: security.user_password = adminuser:adminpassword. +#adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set. +#security.user_name.admin = adminuser +#security.user_password = adminuser:adminpwd +#security.user_name.user = user1 +#security.user_password = user1:user1pwd +#security.user_name.var = varuser +#security.user_password = varuser:adminpwd + +security.user_name.user = +security.user_name.admin = +security.user_name.var = +security.user_password = + +#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; +#Require reboot; +security.var_enable = + +####################################################################################### +## Customize the softkey ## +####################################################################################### +#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Memory Key (For T38G only) ## +####################################################################################### +#X ranges from 1 to 10; +#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. +#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. +#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. +#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. +#memorykey.x.type--Assign the desired feature to the memory key. +#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS +# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL +# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser +# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group +#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#memorykey.x.sub_type = + +# Configure Memory Key1 +memorykey.1.line = +memorykey.1.value = +memorykey.1.pickup_value = +memorykey.1.type = +memorykey.1.xml_phonebook = +memorykey.1.sub_type = + +# Configure Memory Key2 +memorykey.2.line = +memorykey.2.value = +memorykey.2.pickup_value = +memorykey.2.type = +memorykey.2.xml_phonebook = +memorykey.2.sub_type = + +# Configure Memory Key3 +memorykey.3.line = +memorykey.3.value = +memorykey.3.pickup_value = +memorykey.3.type = +memorykey.3.xml_phonebook = +memorykey.3.sub_type = + +# Configure DSS Key4 +memorykey.4.line = +memorykey.4.value = +memorykey.4.pickup_value = +memorykey.4.type = +memorykey.4.xml_phonebook = +memorykey.4.sub_type = + +# Configure Memory Key5 +memorykey.5.line = +memorykey.5.value = +memorykey.5.pickup_value = +memorykey.5.type = +memorykey.5.xml_phonebook = +memorykey.5.sub_type = + +# Configure Memory Key6 +memorykey.6.line = +memorykey.6.value = +memorykey.6.pickup_value = +memorykey.6.type = +memorykey.6.xml_phonebook = +memorykey.6.sub_type = + +# Configure Memory Key7 +memorykey.7.line = +memorykey.7.value = +memorykey.7.pickup_value = +memorykey.7.type = +memorykey.7.xml_phonebook = +memorykey.7.sub_type = + +# Configure Memory Key8 +memorykey.8.line = +memorykey.8.value = +memorykey.8.pickup_value = +memorykey.8.type = +memorykey.8.xml_phonebook = +memorykey.8.sub_type = + +# Configure Memory Key9 +memorykey.9.line = +memorykey.9.value = +memorykey.9.pickup_value = +memorykey.9.type = +memorykey.9.xml_phonebook = +memorykey.9.sub_type = + +# Configure Memory Key10 +memorykey.10.line = +memorykey.10.value = +memorykey.10.pickup_value = +memorykey.10.type = +memorykey.10.xml_phonebook = +memorykey.10.sub_type = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + +#Configure Line Key1 +linekey.1.line = +linekey.1.value = +linekey.1.pickup_value = +linekey.1.type = +linekey.1.xml_phonebook = +linekey.1.label = + +#Configure Line Key2 +linekey.2.line = +linekey.2.value = +linekey.2.pickup_value = +linekey.2.type = +linekey.2.xml_phonebook = +linekey.2.label = + +#Configure Line Key3 +linekey.3.line = +linekey.3.value = +linekey.3.pickup_value = +linekey.3.type = +linekey.3.xml_phonebook = +linekey.3.label = + +#Configure Line Key4 (for T38G only) +linekey.4.line = +linekey.4.value = +linekey.4.pickup_value = +linekey.4.type = +linekey.4.xml_phonebook = +linekey.4.label = + +#Configure Line Key5 (for T38G only) +linekey.5.line = +linekey.5.value = +linekey.5.pickup_value = +linekey.5.type = +linekey.5.xml_phonebook = +linekey.5.label = + +#Configure Line Key6 (for T38G only) +linekey.6.line = +linekey.6.value = +linekey.6.pickup_value = +linekey.6.type = +linekey.6.xml_phonebook = +linekey.6.label = + +########################################################################################## +## Programmable Key (For T38G only) ## +########################################################################################## +#X ranges from 1 to 15. +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook +#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock +#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. +#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. + +#programablekey.x.value = +#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#programablekey.x.history_type = + +#programablekey.x.label--This parameter is only available to the key 1 to key 4. + +programablekey.1.type = +programablekey.1.line = +programablekey.1.value = +programablekey.1.xml_phonebook = +programablekey.1.history_type = +programablekey.1.label = + +########################################################################################## +## Expansion Key Ł¨For T38G onlyŁ© ## +########################################################################################## +#X ranges from 1 to 6, Y ranges from 1 to 39. +#expansion_module.x.key.y.type = 37 (Switch by default) +#expansion_module.x.key.y.line = 0 +#expansion_module.x.key.y.value = +#expansion_module.x.key.y.pickup_value = +#expansion_module.x.key.y.label = + +#Each expansion module1 key1 +expansion_module.1.key.1.type = +expansion_module.1.key.1.line = +expansion_module.1.key.1.value = +expansion_module.1.key.1.pickup_value = +expansion_module.1.key.1.label = + +#Each expansion module1 key2 +expansion_module.1.key.2.type = +expansion_module.1.key.2.line = +expansion_module.1.key.2.value = +expansion_module.1.key.2.pickup_value = +expansion_module.1.key.2.label = + +#Each expansion module2 key1 +expansion_module.2.key.1.type = +expansion_module.2.key.1.line = +expansion_module.2.key.1.value = +expansion_module.2.key.1.pickup_value = +expansion_module.2.key.1.label = + +####################################################################################### +## Automatic Call Distribute ## +####################################################################################### +#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; +acd.auto_available = + +#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. +acd.auto_available_timer = + +####################################################################################### +# Action URL Settings ## +####################################################################################### + +#action_url.setup_completed--Inform the server that the phone has completed the startup. +#action_url.dnd_on-- Inform the server that the DND is activated on the phone. +#The value format is: http://IP address of server/help.xml?variable name=variable value. +#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. +#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. +#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. +#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. +#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. +#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. +#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. +#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac + +action_url.setup_completed = +action_url.log_on = +action_url.log_off = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. +lang.wui = + +#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. +#lang.gui = English +lang.gui = + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = +local_time.ntp_server2 = + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = + +#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. +local_time.offset_time = + +#Configure the time format; 0-12 Hour, 1-24 Hour (default); +local_time.time_format = + +#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; +local_time.date_format = + +#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = + +#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. +local_time.manual_time_enable = + +####################################################################################### +## Hot Desking ## +####################################################################################### +#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; +#hotdesking.startup_register_name_enable = 0 (default) +#hotdesking.startup_username_enable = 1 (default) +#hotdesking.startup_password_enable = 1 (default) +#hotdesking.startup_sip_server_enable = 1 (default) +#hotdesking.startup_outbound_enable = 0 (default) + +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; +#0-Disabled, 1-Enabled; +#hotdesking.dsskey_register_name_enable = 0 (default) +#hotdesking.dsskey_username_enable = 1 (default) +#hotdesking.dsskey_password_enable = 1 (default) +#hotdesking.dsskey_sip_server_enable = 1 (default) +#hotdesking.dsskey_outbound_enable = 0 (default) + +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Distinctive Ring Tones ## +####################################################################################### + +#"X" ranges from 1 to 10; +#Configure the text to map the keywords contained in the "Alert-info" header. +#distinctive_ring_tones.alert_info.X.text = family +distinctive_ring_tones.alert_info.1.text = + +#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. +#distinctive_ring_tones.alert_info.X.ringer = 1 +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Auto Redial ## +####################################################################################### + +#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; +auto_redial.enable = + +#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. +auto_redial.interval = + +#Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10. +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; +zero_touch.enable = + +#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. +zero_touch.wait_time = + +####################################################################################### +## Push XML ## +####################################################################################### + +push_xml.server = + +#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; +push_xml.block_in_calling = + +#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; +push_xml.sip_notify = + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = + +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the dialnow rule. X ranges from 1 to 20. +#dialplan.dialnow.rule.x = +#dialplan.dialnow.line_id.x = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 20. +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## BSFT Phonebook ## +####################################################################################### + +#Configuration of BW phonebook. X ranges from 1 to 6. +#bw_phonebook.data.x.server = +#bw_phonebook.data.x.port = +#bw_phonebook.data.x.username = +#bw_phonebook.data.x.password = +#bw_phonebook.data.x.name = + +bw_phonebook.data.1.server = +bw_phonebook.data.1.port = +bw_phonebook.data.1.username = +bw_phonebook.data.1.password = +bw_phonebook.data.1.name = + +####################################################################################### +## BSFT Call Log ## +####################################################################################### + +#Configuration of the BW call log. X ranges from 1 to 3. +#bw_call_log.data.x.server = +#bw_call_log.data.x.port = +#bw_call_log.data.x.username = +#bw_call_log.data.x.password = +#bw_call_log.data.x.name = + +bw_call_log.data.1.server = +bw_call_log.data.1.port = +bw_call_log.data.1.username = +bw_call_log.data.1.password = +bw_call_log.data.1.name = + +#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; +#0-Disabled (default), 1-Enabled; +#Require reboot; +bw.calllog_and_dir = + +#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); +#Require reboot; +bw.behave_calllog = + +#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); +#Require reboot; +bw.behave_bw_dir = + +#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +####################################################################################### +## Remote phonebook ## +####################################################################################### + +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +#remote_phonebook.data.x.url = +#remote_phonebook.data.x.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +####################################################################################### +## LDAP Settings ## +####################################################################################### +#Configure the search criteria for name and number lookups. +ldap.name_filter = +ldap.number_filter = + +ldap.host = 0.0.0.0 +ldap.port = 389 + +ldap.base = +ldap.user = +ldap.password = + +#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. +ldap.max_hits = + +ldap.name_attr = +ldap.numb_attr = +ldap.display_name = + +#Configure the LDAP version. The valid value is 2 or 3 (default). +ldap.version = + +#Conifugre the search delay time. It ranges from 0 to 2000 (default). +ldap.search_delay = + +#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; +ldap.call_in_lookup = + +#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; +ldap.ldap_sort = + +#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; +ldap.dial_lookup = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 +features.dnd_refuse_code = + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = + +#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; +features.call_completion_enable = + +features.dnd.on_code = +features.dnd.off_code = + +#Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default); +features.dnd.emergency_enable = + +#Specify the emergency number, multiple numbers (at most three) are separated by comma. +features.dnd.emergency_authorized_number = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); +features.intercom.allow = + +#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; +features.intercom.mute = + +#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); +features.intercom.tone = + +#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); +features.intercom.barge = + +#Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled; +features.remote_phonebook.enable = + +#Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600. +features.remote_phonebook.flash_time = + +#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2. +features.hotline_number = +features.hotline_delay = + +#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). +features.dtmf.repetition = + +#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. +features.busy_tone_delay = + +#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; +features.pound_key.mode = + +#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); +features.send_key_tone = +features.key_tone = + +features.redial_tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; +#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); +features.action_uri_limit_ip = + +#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); +features.dsskey_blind_tran = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = + +#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); +#Require reboot; +features.direct_ip_call_enable = + +#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; +features.ringer_device.is_use_headset = + +#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.group_pickup_enable = + +#Configure the group pickup code. +features.pickup.group_pickup_code = + +#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.direct_pickup_enable = + +#Configure the directed pickup code. +features.pickup.direct_pickup_code = + +#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; +#0-Disabled (default), 1-Enabled; +features.pickup.blf_visual_enable = +features.pickup.blf_audio_enable = + +#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle. +#0-Disabled (default), 1-Enabled; +features.blf_and_callpark_idle_led_enable = + +#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. +phone_setting.inter_digit_time = + +#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. +phone_setting.flash_hook_timer = + +#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; +phone_setting.lock = + +#Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10. +phone_setting.phone_lock.unlock_pin = +phone_setting.phone_lock.lock_time_out = + +#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wavˇ­ˇ­Ring8.wav. +#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav +phone_setting.ring_type = + +#Configure the active backlight level. It ranges from 1 to 10, the default value is 2. +#The same level for different phones may result in different backlight intensities. +#The backlight level of T2xP ranges from 1 to 3. +phone_setting.active_backlight_level = + +#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. +phone_setting.inactive_backlight_level = + +#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800. +phone_setting.backlight_time = + +#Configure the phone background. +#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png +#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png +phone_setting.backgrounds = + +#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800. +phone_setting.screen_saver_time = + +#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. +#phone_setting.ring_for_tranfailed = Ring1.wav +phone_setting.ring_for_tranfailed = + +#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; +phone_setting.logon_wizard = + +#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; +phone_setting.predial_autodial = + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = + +#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. +phone_setting.dialnow_delay = + +#Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled; +phone_setting.custom_softkey_enable = + +#Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4; +phone_setting.theme = + +#Configure the emergency number, each separated by comma. The default value is 112,911,110. +phone_setting.emergency.number = + +#Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default); +phone_setting.sms_popup_enable = + +#Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled; +phone_setting.common_power_led_enable = + +#Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled; +phone_setting.mail_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled; +phone_setting.mute_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled; +phone_setting.hold_power_led_flash_enable = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +firmware.url = + +####################################################################################### +## Configure the access URL of the customized ringtones ## +####################################################################################### +ringtone.url = + +#ringtone.delete = http://localhost/all,delete all the customized ring tones. +ringtone.delete = + +####################################################################################### +## Configure the access URL of language file ## +####################################################################################### +gui_lang.url = + +#gui_lang.delete =http://localhost/all, delete all the customized languages. +gui_lang.delete = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate. +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Dialnow Rule/Replace Rule ## +####################################################################################### +local_contact.data.url = +auto_dst.url = +dialplan_dialnow.url = +dialplan_replace_rule.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations. +custom_factory_configuration.url = + +####################################################################################### +## Call List ## +####################################################################################### +#Configure the access URL for downloading the call list. +#Require reboot +call_list.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar. +openvpn.url = + +####################################################################################### +## Configure the access URL of the Wallpaper ## +####################################################################################### +wallpaper_upload.url = + +####################################################################################### +## Configure the access URL of the Screensaver ## +####################################################################################### +#Configure the access URL for downloading the customized wallpaper. +screen_saver.pic.url = + +####################################################################################### +## Configuration files for Var ## +####################################################################################### +#Configure the access URL for downloading the files for var. +#Require reboot +web_item_level.url = + diff --git a/resources/templates/provision/yealink/t22/{$mac}.cfg b/resources/templates/provision/yealink/t22/{$mac}.cfg index 63c9a5834e..ef0849cff9 100644 --- a/resources/templates/provision/yealink/t22/{$mac}.cfg +++ b/resources/templates/provision/yealink/t22/{$mac}.cfg @@ -1,2230 +1,1887 @@ -#!version:1.0.0.1 - -##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## - -####################################################################################### -## Account1 Settings ## -####################################################################################### - -#Enable or disable the account1, 0-Disabled (default), 1-Enabled; -account.1.enable = 1 - -#Configure the label displayed on the LCD screen for account1. -account.1.label = {$display_name_1} - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.1.alert_info_url_enable = - -#Configure the display name of account1. -account.1.display_name = {$display_name_1} - -#Configure the username and password for register authentication. -account.1.auth_name = {$user_id_1} -account.1.password = {$user_password_1} - -#Configure the register user name. -account.1.user_name = {$user_id_1} - -#Configure the SIP server address. -account.1.sip_server_host = {$server_address_1} - -#Specify the port for the SIP server. The default value is 5060. -account.1.sip_server_port = 5060 - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.1.outbound_proxy_enable = 1 - -#Specify the IP address or domain name of the outbound proxy server. -account.1.outbound_host = {$outbound_proxy_1} - -#Specify the server port, the default value is 5060. -account.1.outbound_port = 5060 - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.1.transport = 1 - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.1.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.1.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.1.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.1.backup_outbound_port = - -#Configure the voice mail number of account1. -voice_mail.number.1 = *97 - -#Configure the proxy server to account1. -account.1.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.1.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.1.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.1.anonymous_call_oncode = -account.1.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.1.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.1.anonymous_reject_oncode = -account.1.anonymous_reject_offcode = - -#Configure the SIP port for account1, the default value is 5060. -account.1.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.1.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.1.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.1.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.1.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.1.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.1.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.1.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits(default), 2-RFC4916 -account.1.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.1.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.1.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.1.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.1.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.1.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.1.ptime = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.1.shared_line = - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.1.bla_number = -account.1.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.1.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.1.group_pickup_code = -account.1.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.1.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.1.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.1.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.1.register_mac = -account.1.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.1.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.1.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.1.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.1.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.1.blf_list_code = - -#Configure the barge-in code. -account.1.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled (default) , 1-Enabled ; -account.1.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.1.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.1.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.1.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.1.enable_signal_encode = - -#Configure the key for encoding. -account.1.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.1.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.1.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.1.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.1.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account1; 0-Disabled (default), 1-Enabled; -account.1.balance_enable = - -#Configure the access URL of the balance server for account1. -account.1.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.1.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.1.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.1.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.1.nat.nat_traversal = - -#Configure the STUN server address. -account.1.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.1.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.1.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.1.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.1.advanced.timer_t1 = -account.1.advanced.timer_t2 = -account.1.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.1.dns_query_timeout = - -#Assign a ringtone for account1. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.1.ringtone.ring_type = - -#Audio codecs for account1 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.1.codec.Y.enable = -#The type of the specified codec. -#account.1.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.1.codec.Y.priority = -#The payload of the specified codec. -#account.1.codec.Y.rtpmap = - -account.1.codec.1.enable = 1 -account.1.codec.1.payload_type = PCMU -account.1.codec.1.priority = 1 -account.1.codec.1.rtpmap = 0 - -account.1.codec.2.enable = 1 -account.1.codec.2.payload_type = PCMA -account.1.codec.2.priority = 2 -account.1.codec.2.rtpmap = 8 - -account.1.codec.3.enable = 0 -account.1.codec.3.payload_type = G723_53 -account.1.codec.3.priority =0 -account.1.codec.3.rtpmap = 4 - -account.1.codec.4.enable = 0 -account.1.codec.4.payload_type = G723_63 -account.1.codec.4.priority = 0 -account.1.codec.4.rtpmap = 4 - -account.1.codec.5.enable = 1 -account.1.codec.5.payload_type = G729 -account.1.codec.5.priority = 3 -account.1.codec.5.rtpmap = 18 - -account.1.codec.6.enable = 1 -account.1.codec.6.payload_type = G722 -account.1.codec.6.priority = 4 -account.1.codec.6.rtpmap = 9 - -account.1.codec.7.enable = 0 -account.1.codec.7.payload_type = iLBC -account.1.codec.7.priority = 0 -account.1.codec.7.rtpmap = 102 - -account.1.codec.8.enable = 0 -account.1.codec.8.payload_type = G726-16 -account.1.codec.8.priority = 0 -account.1.codec.8.rtpmap = 112 - -account.1.codec.9.enable = 0 -account.1.codec.9.payload_type = G726-24 -account.1.codec.9.priority = 0 -account.1.codec.9.rtpmap = 102 - -account.1.codec.10.enable = 0 -account.1.codec.10.payload_type = G726-32 -account.1.codec.10.priority = 0 -account.1.codec.10.rtpmap = 99 - -account.1.codec.11.enable = 0 -account.1.codec.11.payload_type = G726-40 -account.1.codec.11.priority = 0 -account.1.codec.11.rtpmap = 104 - -account.1.codec.12.enable = 0 -account.1.codec.12.payload_type = iLBC_13_3 -account.1.codec.12.priority = 0 -account.1.codec.12.rtpmap = 97 - -account.1.codec.13.enable = 0 -account.1.codec.13.payload_type = iLBC_15_2 -account.1.codec.13.priority = 0 -account.1.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.1.bw_acd_reason_code.Y = 500(lunch time) -account.1.bw_acd_reason_code.1 = -account.1.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Configure the call forward key mode; 0-Phone mode (default), 1-Custom mode. -features.fwd_mode = - -#Enable or disable the always forward feature for account1; 0-Disabled (default), 1-Enabled; -account.1.always_fwd.enable = - -#Configure the destination number of the always forward for account1. -account.1.always_fwd.target = - -#Configure the always forward on code and off code for account1. -account.1.always_fwd.on_code = -account.1.always_fwd.off_code = - -#Enable or disable the busy forward feature for account1; 0-Disabled (default), 1-Enabled; -account.1.busy_fwd.enable = -account.1.busy_fwd.target = -account.1.busy_fwd.on_code = -account.1.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.1.timeout_fwd.enable = -account.1.timeout_fwd.target = -account.1.timeout_fwd.timeout = -account.1.timeout_fwd.on_code = -account.1.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account1; 0-Disabled (default), 1-Enabled; -account.1.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. -features.dnd_mode = - -#Enable or disable the DND feautre for account1; 0-Disabled (default), 1-Enabled; -account.1.dnd.enable = - -#Configure the DND on code and off code for account1. -account.1.dnd.on_code = -account.1.dnd.off_code = - -####################################################################################### -## Account2 Settings ## -####################################################################################### - -#Enable or disable the account2, 0-Disabled (default), 1-Enabled; -account.2.enable = 1 - -#Configure the label displayed on the LCD screen for account2. -account.2.label = {$display_name_2} - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.2.alert_info_url_enable = - -#Configure the display name of account2. -account.2.display_name = {$display_name_2} - -#Configure the username and password for register authentication. -account.2.auth_name = {$user_id_2} -account.2.password = {$user_password_2} - -#Configure the register user name. -account.2.user_name = {$user_id_2} - -#Configure the SIP server address. -account.2.sip_server_host = {$server_address_2} -#Specify the port for the SIP server. The default value is 5060. -account.2.sip_server_port = 5060 - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.2.outbound_proxy_enable = - -#Specify the IP address or domain name of the outbound proxy server. -account.2.outbound_host = - -#Specify the server port, the default value is 5060. -account.2.outbound_port = - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.2.transport = - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.2.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.2.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.2.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.2.backup_outbound_port = - -#Configure the voice mail number of account2. -voice_mail.number.2 = *97 - -#Configure the proxy server to account2. -account.2.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.2.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.2.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.2.anonymous_call_oncode = -account.2.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.2.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.2.anonymous_reject_oncode = -account.2.anonymous_reject_offcode = - -#Configure the SIP port for account2, the default value is 5060. -account.2.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.2.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.2.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.2.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.2.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.2.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.2.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.2.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits (default), 2-RFC4916 -account.2.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.2.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.2.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.2.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.2.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.2.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.2.ptime = - -#Assign account2 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.2.shared_line = - -#Configure BLA number for account2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.2.bla_number = -account.2.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.2.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.2.group_pickup_code = -account.2.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.2.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.2.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.2.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.2.register_mac = -account.2.register_line = - -#Configure the interval (in seconds) the phone retries to register when account2 fails to register. It ranges from 0 to 1800, the default value is 30. -account.2.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.2.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.2.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.2.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.2.blf_list_code = - -#Configure the barge-in code. -account.2.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled , 1-Enabled (default); -account.2.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.2.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.2.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.2.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.2.enable_signal_encode = - -#Configure the key for encoding. -account.2.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.2.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.2.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.2.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.2.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account2; 0-Disabled (default), 1-Enabled; -account.2.balance_enable = - -#Configure the access URL of the balance server for account2. -account.2.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.2.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.2.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.2.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.2.nat.nat_traversal = - -#Configure the STUN server address. -account.2.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.2.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.2.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.2.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.2.advanced.timer_t1 = -account.2.advanced.timer_t2 = -account.2.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.2.dns_query_timeout = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.2.ringtone.ring_type = - -#Audio codecs for account2 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.2.codec.Y.enable = -#The type of the specified codec. -#account.2.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.2.codec.Y.priority = -#The payload of the specified codec. -#account.2.codec.Y.rtpmap = - -account.2.codec.1.enable = 1 -account.2.codec.1.payload_type = PCMU -account.2.codec.1.priority = 1 -account.2.codec.1.rtpmap = 0 - -account.2.codec.2.enable = 1 -account.2.codec.2.payload_type = PCMA -account.2.codec.2.priority = 2 -account.2.codec.2.rtpmap = 8 - -account.2.codec.3.enable = 0 -account.2.codec.3.payload_type = G723_53 -account.2.codec.3.priority =0 -account.2.codec.3.rtpmap = 4 - -account.2.codec.4.enable = 0 -account.2.codec.4.payload_type = G723_63 -account.2.codec.4.priority = 0 -account.2.codec.4.rtpmap = 4 - -account.2.codec.5.enable = 1 -account.2.codec.5.payload_type = G729 -account.2.codec.5.priority = 3 -account.2.codec.5.rtpmap = 18 - -account.2.codec.6.enable = 1 -account.2.codec.6.payload_type = G722 -account.2.codec.6.priority = 4 -account.2.codec.6.rtpmap = 9 - -account.2.codec.7.enable = 0 -account.2.codec.7.payload_type = iBLC -account.2.codec.7.priority = 0 -account.2.codec.7.rtpmap = 102 - -account.2.codec.8.enable = 0 -account.2.codec.8.payload_type = G726-16 -account.2.codec.8.priority = 0 -account.2.codec.8.rtpmap = 112 - -account.2.codec.9.enable = 0 -account.2.codec.9.payload_type = G726-24 -account.2.codec.9.priority = 0 -account.2.codec.9.rtpmap = 102 - -account.2.codec.10.enable = 0 -account.2.codec.10.payload_type = G726-32 -account.2.codec.10.priority = 0 -account.2.codec.10.rtpmap = 99 - -account.2.codec.11.enable = 0 -account.2.codec.11.payload_type = G726-40 -account.2.codec.11.priority = 0 -account.2.codec.11.rtpmap = 104 - -account.2.codec.12.enable = 0 -account.2.codec.12.payload_type = iLBC_13_3 -account.2.codec.12.priority = 0 -account.2.codec.12.rtpmap = 97 - -account.2.codec.13.enable = 0 -account.2.codec.13.payload_type = iLBC_15_2 -account.2.codec.13.priority = 0 -account.2.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.2.bw_acd_reason_code.Y = 500(lunch time) -account.2.bw_acd_reason_code.1 = -account.2.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Enable or disable the always forward feature for account2; 0-Disabled (default), 1-Enabled; -account.2.always_fwd.enable = - -#Configure the destination number of the always forward for account2. -account.2.always_fwd.target = - -#Configure the always forward on code and off code for account2. -account.2.always_fwd.on_code = -account.2.always_fwd.off_code = - -#Enable or disable the busy forward feature for account2; 0-Disabled (default), 1-Enabled; -account.2.busy_fwd.enable = -account.2.busy_fwd.target = -account.2.busy_fwd.on_code = -account.2.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account2; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.2.timeout_fwd.enable = -account.2.timeout_fwd.target = -account.2.timeout_fwd.timeout = -account.2.timeout_fwd.on_code = -account.2.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account2; 0-Disabled (default), 1-Enabled; -account.2.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Enable or disable the DND feature for account2; 0-Disabled (default), 1-Enabled; -account.2.dnd.enable = - -#Configure the DND on code and off code for account2. -account.2.dnd.on_code = -account.2.dnd.off_code = - -####################################################################################### -## Account3 Settings ## -####################################################################################### - -#Enable or disable the account3, 0-Disabled (default), 1-Enabled; -account.3.enable = - -#Configure the label displayed on the LCD screen for account3. -account.3.label = - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.3.alert_info_url_enable = - -#Configure the display name of account3. -account.3.display_name = - -#Configure the username and password for register authentication. -account.3.auth_name = -account.3.password = - -#Configure the register user name. -account.3.user_name = - -#Configure the SIP server address. -account.3.sip_server_host = -#Specify the port for the SIP server. The default value is 5060. -account.3.sip_server_port = - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.3.outbound_proxy_enable = - -#Specify the IP address or domain name of the outbound proxy server. -account.3.outbound_host = - -#Specify the server port, the default value is 5060. -account.3.outbound_port = - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.3.transport = - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.3.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.3.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.3.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.3.backup_outbound_port = - -#Configure the voice mail number of account3. -voice_mail.number.3 = - -#Configure the proxy server to account3. -account.3.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.3.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.3.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.3.anonymous_call_oncode = -account.3.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.3.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.3.anonymous_reject_oncode = -account.3.anonymous_reject_offcode = - -#Configure the SIP port for account3, the default value is 5060. -account.3.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.3.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.3.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.3.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.3.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.3.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.3.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.3.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits (default), 2-RFC4916 -account.3.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.3.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.3.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.3.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.3.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.3.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.3.ptime = - -#Assign account3 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.3.shared_line = - -#Configure BLA number for account3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.3.bla_number = -account.3.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.3.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.3.group_pickup_code = -account.3.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.3.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.3.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.3.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.3.register_mac = -account.3.register_line = - -#Configure the interval (in seconds) the phone retries to register when account3 fails to register. It ranges from 0 to 1800, the default value is 30. -account.3.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.3.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.3.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.3.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.3.blf_list_code = - -#Configure the barge-in code. -account.3.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled (default) , 1-Enabled ; -account.3.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.3.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.3.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.3.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.3.enable_signal_encode = - -#Configure the key for encoding. -account.3.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.3.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.3.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.3.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.3.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account3; 0-Disabled (default), 1-Enabled; -account.3.balance_enable = - -#Configure the access URL of the balance server for account3. -account.3.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.3.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.3.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.3.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.3.nat.nat_traversal = - -#Configure the STUN server address. -account.3.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.3.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.3.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.3.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.3.advanced.timer_t1 = -account.3.advanced.timer_t2 = -account.3.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.3.dns_query_timeout = - -#Assign a ringtone for account3. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.3.ringtone.ring_type = - -#Audio codecs for account3 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.3.codec.Y.enable = -#The type of the specified codec. -#account.3.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.3.codec.Y.priority = -#The payload of the specified codec. -#account.3.codec.Y.rtpmap = - -account.3.codec.1.enable = 1 -account.3.codec.1.payload_type = PCMU -account.3.codec.1.priority = 1 -account.3.codec.1.rtpmap = 0 - -account.3.codec.2.enable = 1 -account.3.codec.2.payload_type = PCMA -account.3.codec.2.priority = 2 -account.3.codec.2.rtpmap = 8 - -account.3.codec.3.enable = 0 -account.3.codec.3.payload_type = G723_53 -account.3.codec.3.priority =0 -account.3.codec.3.rtpmap = 4 - -account.3.codec.4.enable = 0 -account.3.codec.4.payload_type = G723_63 -account.3.codec.4.priority = 0 -account.3.codec.4.rtpmap = 4 - -account.3.codec.5.enable = 1 -account.3.codec.5.payload_type = G729 -account.3.codec.5.priority = 3 -account.3.codec.5.rtpmap = 18 - -account.3.codec.6.enable = 1 -account.3.codec.6.payload_type = G722 -account.3.codec.6.priority = 4 -account.3.codec.6.rtpmap = 9 - -account.3.codec.7.enable = 0 -account.3.codec.7.payload_type = iBLC -account.3.codec.7.priority = 0 -account.3.codec.7.rtpmap = 102 - -account.3.codec.8.enable = 0 -account.3.codec.8.payload_type = G726-16 -account.3.codec.8.priority = 0 -account.3.codec.8.rtpmap = 112 - -account.3.codec.9.enable = 0 -account.3.codec.9.payload_type = G726-24 -account.3.codec.9.priority = 0 -account.3.codec.9.rtpmap = 102 - -account.3.codec.10.enable = 0 -account.3.codec.10.payload_type = G726-32 -account.3.codec.10.priority = 0 -account.3.codec.10.rtpmap = 99 - -account.3.codec.11.enable = 0 -account.3.codec.11.payload_type = G726-40 -account.3.codec.11.priority = 0 -account.3.codec.11.rtpmap = 104 - -account.3.codec.12.enable = 0 -account.3.codec.12.payload_type = iLBC_13_3 -account.3.codec.12.priority = 0 -account.3.codec.12.rtpmap = 97 - -account.3.codec.13.enable = 0 -account.3.codec.13.payload_type = iLBC_15_2 -account.3.codec.13.priority = 0 -account.3.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.3.bw_acd_reason_code.Y = 500(lunch time) -account.3.bw_acd_reason_code.1 = -account.3.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Enable or disable the always forward feature for account3; 0-Disabled (default), 1-Enabled; -account.3.always_fwd.enable = - -#Configure the destination number of the always forward for account3. -account.3.always_fwd.target = - -#Configure the always forward on code and off code for account3. -account.3.always_fwd.on_code = -account.3.always_fwd.off_code = - -#Enable or disable the busy forward feature for account3; 0-Disabled (default), 1-Enabled; -account.3.busy_fwd.enable = -account.3.busy_fwd.target = -account.3.busy_fwd.on_code = -account.3.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account3; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.3.timeout_fwd.enable = -account.3.timeout_fwd.target = -account.3.timeout_fwd.timeout = -account.3.timeout_fwd.on_code = -account.3.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account3; 0-Disabled (default), 1-Enabled; -account.3.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Enable or disable the DND feautre for account3; 0-Disabled (default), 1-Enabled; -account.3.dnd.enable = - -#Configure the DND on code and off code for account3. -account.3.dnd.on_code = -account.3.dnd.off_code = - -####################################################################################### -## Account4 Settings (For T28P only) ## -####################################################################################### - -#Enable or disable the account4, 0-Disabled (default), 1-Enabled; -account.4.enable = - -#Configure the label displayed on the LCD screen for account4. -account.4.label = - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.4.alert_info_url_enable = - -#Configure the display name of account4. -account.4.display_name = - -#Configure the username and password for register authentication. -account.4.auth_name = -account.4.password = - -#Configure the register user name. -account.4.user_name = - -#Configure the SIP server address. -account.4.sip_server_host = -#Specify the port for the SIP server. The default value is 5060. -account.4.sip_server_port = - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.4.outbound_proxy_enable = - -#Specify the IP address or domain name of the outbound proxy server. -account.4.outbound_host = - -#Specify the server port, the default value is 5060. -account.4.outbound_port = - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.4.transport = - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.4.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.4.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.4.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.4.backup_outbound_port = - -#Configure the voice mail number of account4. -voice_mail.number.4 = - -#Configure the proxy server to account4. -account.4.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.4.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.4.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.4.anonymous_call_oncode = -account.4.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.4.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.4.anonymous_reject_oncode = -account.4.anonymous_reject_offcode = - -#Configure the SIP port for account4, the default value is 5060. -account.4.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.4.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.4.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.4.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.4.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.4.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.4.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.4.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits(default), 2-RFC4916 -account.4.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.4.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.4.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.4.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.4.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.4.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.4.ptime = - -#Assign account4 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.4.shared_line = - -#Configure BLA number for account4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.4.bla_number = -account.4.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.4.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.4.group_pickup_code = -account.4.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.4.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.4.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.4.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.4.register_mac = -account.4.register_line = - -#Configure the interval (in seconds) the phone retries to register when account4 fails to register. It ranges from 0 to 1800, the default value is 30. -account.4.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.4.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.4.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.4.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.4.blf_list_code = - -#Configure the barge-in code. -account.4.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled (default) , 1-Enabled ; -account.4.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.4.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.4.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.4.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.4.enable_signal_encode = - -#Configure the key for encoding. -account.4.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.4.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.4.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.4.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.4.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account4; 0-Disabled (default), 1-Enabled; -account.4.balance_enable = - -#Configure the access URL of the balance server for account4. -account.4.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.4.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.4.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.4.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.4.nat.nat_traversal = - -#Configure the STUN server address. -account.4.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.4.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.4.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.4.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.4.advanced.timer_t1 = -account.4.advanced.timer_t2 = -account.4.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.4.dns_query_timeout = - -#Assign a ringtone for account4. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.4.ringtone.ring_type = - -#Audio codecs for account4 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.4.codec.Y.enable = -#The type of the specified codec. -#account.4.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.4.codec.Y.priority = -#The payload of the specified codec. -#account.4.codec.Y.rtpmap = - -account.4.codec.1.enable = 1 -account.4.codec.1.payload_type = PCMU -account.4.codec.1.priority = 1 -account.4.codec.1.rtpmap = 0 - -account.4.codec.2.enable = 1 -account.4.codec.2.payload_type = PCMA -account.4.codec.2.priority = 2 -account.4.codec.2.rtpmap = 8 - -account.4.codec.3.enable = 0 -account.4.codec.3.payload_type = G723_53 -account.4.codec.3.priority =0 -account.4.codec.3.rtpmap = 4 - -account.4.codec.4.enable = 0 -account.4.codec.4.payload_type = G723_63 -account.4.codec.4.priority = 0 -account.4.codec.4.rtpmap = 4 - -account.4.codec.5.enable = 1 -account.4.codec.5.payload_type = G729 -account.4.codec.5.priority = 3 -account.4.codec.5.rtpmap = 18 - -account.4.codec.6.enable = 1 -account.4.codec.6.payload_type = G722 -account.4.codec.6.priority = 4 -account.4.codec.6.rtpmap = 9 - -account.4.codec.7.enable = 0 -account.4.codec.7.payload_type = iBLC -account.4.codec.7.priority = 0 -account.4.codec.7.rtpmap = 102 - -account.4.codec.8.enable = 0 -account.4.codec.8.payload_type = G726-16 -account.4.codec.8.priority = 0 -account.4.codec.8.rtpmap = 112 - -account.4.codec.9.enable = 0 -account.4.codec.9.payload_type = G726-24 -account.4.codec.9.priority = 0 -account.4.codec.9.rtpmap = 102 - -account.4.codec.10.enable = 0 -account.4.codec.10.payload_type = G726-32 -account.4.codec.10.priority = 0 -account.4.codec.10.rtpmap = 99 - -account.4.codec.11.enable = 0 -account.4.codec.11.payload_type = G726-40 -account.4.codec.11.priority = 0 -account.4.codec.11.rtpmap = 104 - -account.4.codec.12.enable = 0 -account.4.codec.12.payload_type = iLBC_13_3 -account.4.codec.12.priority = 0 -account.4.codec.12.rtpmap = 97 - -account.4.codec.13.enable = 0 -account.4.codec.13.payload_type = iLBC_15_2 -account.4.codec.13.priority = 0 -account.4.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.4.bw_acd_reason_code.Y = 500(lunch time) -account.4.bw_acd_reason_code.1 = -account.4.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Enable or disable the always forward feature for account4; 0-Disabled (default), 1-Enabled; -account.4.always_fwd.enable = - -#Configure the destination number of the always forward for account4. -account.4.always_fwd.target = - -#Configure the always forward on code and off code for account4. -account.4.always_fwd.on_code = -account.4.always_fwd.off_code = - -#Enable or disable the busy forward feature for account4; 0-Disabled (default), 1-Enabled; -account.4.busy_fwd.enable = -account.4.busy_fwd.target = -account.4.busy_fwd.on_code = -account.4.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account4; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.4.timeout_fwd.enable = -account.4.timeout_fwd.target = -account.4.timeout_fwd.timeout = -account.4.timeout_fwd.on_code = -account.4.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account4; 0-Disabled (default), 1-Enabled; -account.4.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Enable or disable the DND feautre for account4; 0-Disabled (default), 1-Enabled; -account.4.dnd.enable = - -#Configure the DND on code and off code for account4. -account.4.dnd.on_code = -account.4.dnd.off_code = - -####################################################################################### -## Account5 Settings (For T28P only) ## -####################################################################################### - -#Enable or disable the account5, 0-Disabled (default), 1-Enabled; -account.5.enable = - -#Configure the label displayed on the LCD screen for account5. -account.5.label = - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.5.alert_info_url_enable = - -#Configure the display name of account5. -account.5.display_name = - -#Configure the username and password for register authentication. -account.5.auth_name = -account.5.password = - -#Configure the register user name. -account.5.user_name = - -#Configure the SIP server address. -account.5.sip_server_host = -#Specify the port for the SIP server. The default value is 5060. -account.5.sip_server_port = - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.5.outbound_proxy_enable = - -#Specify the IP address or domain name of the outbound proxy server. -account.5.outbound_host = - -#Specify the server port, the default value is 5060. -account.5.outbound_port = - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.5.transport = - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.5.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.5.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.5.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.5.backup_outbound_port = - -#Configure the voice mail number of account5. -voice_mail.number.5 = - -#Configure the proxy server to account5. -account.5.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.5.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.5.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.5.anonymous_call_oncode = -account.5.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.5.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.5.anonymous_reject_oncode = -account.5.anonymous_reject_offcode = - -#Configure the SIP port for account5, the default value is 5060. -account.5.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.5.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.5.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.5.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.5.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.5.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.5.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.5.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits (default), 2-RFC4916 -account.5.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.5.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.5.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.5.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.5.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.5.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.5.ptime = - -#Assign account5 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.5.shared_line = - -#Configure BLA number for account5 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.5.bla_number = -account.5.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.5.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.5.group_pickup_code = -account.5.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.5.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.5.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.5.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.5.register_mac = -account.5.register_line = - -#Configure the interval (in seconds) the phone retries to register when account5 fails to register. It ranges from 0 to 1800, the default value is 30. -account.5.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.5.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.5.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.5.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.5.blf_list_code = - -#Configure the barge-in code. -account.5.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled (default) , 1-Enabled ; -account.5.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.5.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.5.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.5.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.5.enable_signal_encode = - -#Configure the key for encoding. -account.5.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.5.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.5.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.5.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.5.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account5; 0-Disabled (default), 1-Enabled; -account.5.balance_enable = - -#Configure the access URL of the balance server for account5. -account.5.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.5.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.5.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.5.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.5.nat.nat_traversal = - -#Configure the STUN server address. -account.5.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.5.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.5.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.5.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.5.advanced.timer_t1 = -account.5.advanced.timer_t2 = -account.5.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.5.dns_query_timeout = - -#Assign a ringtone for account5. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.5.ringtone.ring_type = - -#Audio codecs for account5 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.5.codec.Y.enable = -#The type of the specified codec. -#account.5.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.5.codec.Y.priority = -#The payload of the specified codec. -#account.5.codec.Y.rtpmap = - -account.5.codec.1.enable = 1 -account.5.codec.1.payload_type = PCMU -account.5.codec.1.priority = 1 -account.5.codec.1.rtpmap = 0 - -account.5.codec.2.enable = 1 -account.5.codec.2.payload_type = PCMA -account.5.codec.2.priority = 2 -account.5.codec.2.rtpmap = 8 - -account.5.codec.3.enable = 0 -account.5.codec.3.payload_type = G723_53 -account.5.codec.3.priority =0 -account.5.codec.3.rtpmap = 4 - -account.5.codec.4.enable = 0 -account.5.codec.4.payload_type = G723_63 -account.5.codec.4.priority = 0 -account.5.codec.4.rtpmap = 4 - -account.5.codec.5.enable = 1 -account.5.codec.5.payload_type = G729 -account.5.codec.5.priority = 3 -account.5.codec.5.rtpmap = 18 - -account.5.codec.6.enable = 1 -account.5.codec.6.payload_type = G722 -account.5.codec.6.priority = 4 -account.5.codec.6.rtpmap = 9 - -account.5.codec.7.enable = 0 -account.5.codec.7.payload_type = iBLC -account.5.codec.7.priority = 0 -account.5.codec.7.rtpmap = 102 - -account.5.codec.8.enable = 0 -account.5.codec.8.payload_type = G726-16 -account.5.codec.8.priority = 0 -account.5.codec.8.rtpmap = 112 - -account.5.codec.9.enable = 0 -account.5.codec.9.payload_type = G726-24 -account.5.codec.9.priority = 0 -account.5.codec.9.rtpmap = 102 - -account.5.codec.10.enable = 0 -account.5.codec.10.payload_type = G726-32 -account.5.codec.10.priority = 0 -account.5.codec.10.rtpmap = 99 - -account.5.codec.11.enable = 0 -account.5.codec.11.payload_type = G726-40 -account.5.codec.11.priority = 0 -account.5.codec.11.rtpmap = 104 - -account.5.codec.12.enable = 0 -account.5.codec.12.payload_type = iLBC_13_3 -account.5.codec.12.priority = 0 -account.5.codec.12.rtpmap = 97 - -account.5.codec.13.enable = 0 -account.5.codec.13.payload_type = iLBC_15_2 -account.5.codec.13.priority = 0 -account.5.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.5.bw_acd_reason_code.Y = 500(lunch time) -account.5.bw_acd_reason_code.1 = -account.5.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Enable or disable the always forward feature for account5; 0-Disabled (default), 1-Enabled; -account.5.always_fwd.enable = - -#Configure the destination number of the always forward for account5. -account.5.always_fwd.target = - -#Configure the always forward on code and off code for account5. -account.5.always_fwd.on_code = -account.5.always_fwd.off_code = - -#Enable or disable the busy forward feature for account5; 0-Disabled (default), 1-Enabled; -account.5.busy_fwd.enable = -account.5.busy_fwd.target = -account.5.busy_fwd.on_code = -account.5.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account5; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.5.timeout_fwd.enable = -account.5.timeout_fwd.target = -account.5.timeout_fwd.timeout = -account.5.timeout_fwd.on_code = -account.5.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account5; 0-Disabled (default), 1-Enabled; -account.5.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; -account.5.dnd.enable = - -#Configure the DND on code and off code for account5. -account.5.dnd.on_code = -account.5.dnd.off_code = - -####################################################################################### -## Account6 Settings (For T28P only) ## -####################################################################################### - -#Enable or disable the account6, 0-Disabled (default), 1-Enabled; -account.6.enable = - -#Configure the label displayed on the LCD screen for account6. -account.6.label = - -#Enable or disable to use the alert info URL; 0-Enabled (default), 1-Disabled; -account.6.alert_info_url_enable = - -#Configure the display name of account6. -account.6.display_name = - -#Configure the username and password for register authentication. -account.6.auth_name = -account.6.password = - -#Configure the register user name. -account.6.user_name = - -#Configure the SIP server address. -account.6.sip_server_host = -#Specify the port for the SIP server. The default value is 5060. -account.6.sip_server_port = - -#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; -account.6.outbound_proxy_enable = - -#Specify the IP address or domain name of the outbound proxy server. -account.6.outbound_host = - -#Specify the server port, the default value is 5060. -account.6.outbound_port = - -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.6.transport = - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -#Require reboot; -account.6.srv_ttl_timer_enable = - -#Specify the service for SIP used to DNS-SRV query; 0-muti-service mixed, 1-SIP+D2U, 2-SIP+D2T, 3-SIPS+D2T; -#Require reboot; -account.6.dns_srv_type = - -#Configure the address of the backup outbound proxy server. -account.6.backup_outbound_host = - -#Specify the port, the default value is 5060. -account.6.backup_outbound_port = - -#Configure the voice mail number of account6. -voice_mail.number.6 = - -#Configure the proxy server to account6. -account.6.proxy_require = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.6.sip_trust_ctrl = - -#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; -account.6.anonymous_call = - -#Configure the on code and off code of the anonymous call feature. -account.6.anonymous_call_oncode = -account.6.anonymous_call_offcode = - -#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; -account.6.reject_anonymous_call = - -#Configure the on code and off code of the reject anonymous call feature. -account.6.anonymous_reject_oncode = -account.6.anonymous_reject_offcode = - -#Configure the SIP port for account6, the default value is 5060. -account.6.sip_listen_port = - -#Configure the register expiry time (in seconds), the default value is 3600. -account.6.expires = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.6.100rel_enable = - -#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; -account.6.precondition = - -#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.6.subscribe_register = - -#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.6.subscribe_mwi = - -#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. -account.6.subscribe_mwi_expires = - -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.6.cid_source = - -#Configure the type of SIP header(s) to display on the caller's LCD screen; 0-RPID-FROM, 1-Dialed Digits (default), 2-RFC4916 -account.6.cp_source = - -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.6.session_timer.enable = - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.6.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.6.session_timer.refresher = - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.6.enable_user_equal_phone = - -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.6.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.6.ptime = - -#Assign account6 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -account.6.shared_line = - -#Configure BLA number for account6 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.6.bla_number = -account.6.bla_subscribe_period = - -#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; -account.6.dialoginfo_callpickup = - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.6.group_pickup_code = -account.6.direct_pickup_code = - -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.6.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.6.missed_calllog = - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.6.subscribe_mwi_to_vm = - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.6.register_mac = -account.6.register_line = - -#Configure the interval (in seconds) the phone retries to register when account6 fails to register. It ranges from 0 to 1800, the default value is 30. -account.6.reg_fail_retry_interval = - -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.6.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.6.conf_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.6.blf.blf_list_uri = - -#Configure the pickup code of BLF List. -account.6.blf_list_code = - -#Configure the barge-in code. -account.6.blf_list_barge_in_code = - -#Enable or disable the phone to handle unmatched notify messages; 0-Disabled (default) , 1-Enabled ; -account.6.out_dialog_blf_enable = - -#Configure the BLF subscribe period (in seconds), the default value is 1800. -account.6.blf.subscribe_period = - -#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). -account.6.subscribe_acd_expires = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.6.sip_server_type = - -#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); -account.6.enable_signal_encode = - -#Configure the key for encoding. -account.6.signal_encode_key = - -#Configure the URI of the Music On Hold server. -account.6.music_server_uri = - -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.6.dtmf.type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.6.dtmf.dtmf_payload = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.6.dtmf.info_type = - -#Enable or disable the phone to obtain the balance for account6; 0-Disabled (default), 1-Enabled; -account.6.balance_enable = - -#Configure the access URL of the balance server for account6. -account.6.balance_link_url = - -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.6.unregister_on_reboot = - -#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.6.compact_header_enable = - -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.6.music_on_hold_type = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.6.nat.nat_traversal = - -#Configure the STUN server address. -account.6.nat.stun_server = - -#Configure the STUN server port, the default value is 3478. -account.6.nat.stun_port = - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); -account.6.nat.udp_update_enable = - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.6.nat.udp_update_time = - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = - -#Configure the session timer (in seconds), the default value of T1, T2, T4 is 0.5, 4, 5. -account.6.advanced.timer_t1 = -account.6.advanced.timer_t2 = -account.6.advanced.timer_t4 = - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.6.dns_query_timeout = - -#Assign a ringtone for account6. The system ring tones are: common (default), Ring1.wav, Ring2.wav,%uFFFD%uFFFD%uFFFD%uFFFDRing8.wav. -#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav -#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav -account.6.ringtone.ring_type = - -#Audio codecs for account6 (Y ranges from 1 to 13). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.6.codec.Y.enable = -#The type of the specified codec. -#account.6.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.6.codec.Y.priority = -#The payload of the specified codec. -#account.6.codec.Y.rtpmap = - -account.6.codec.1.enable = 1 -account.6.codec.1.payload_type = PCMU -account.6.codec.1.priority = 1 -account.6.codec.1.rtpmap = 0 - -account.6.codec.2.enable = 1 -account.6.codec.2.payload_type = PCMA -account.6.codec.2.priority = 2 -account.6.codec.2.rtpmap = 8 - -account.6.codec.3.enable = 0 -account.6.codec.3.payload_type = G723_53 -account.6.codec.3.priority =0 -account.6.codec.3.rtpmap = 4 - -account.6.codec.4.enable = 0 -account.6.codec.4.payload_type = G723_63 -account.6.codec.4.priority = 0 -account.6.codec.4.rtpmap = 4 - -account.6.codec.5.enable = 1 -account.6.codec.5.payload_type = G729 -account.6.codec.5.priority = 3 -account.6.codec.5.rtpmap = 18 - -account.6.codec.6.enable = 1 -account.6.codec.6.payload_type = G722 -account.6.codec.6.priority = 4 -account.6.codec.6.rtpmap = 9 - -account.6.codec.7.enable = 0 -account.6.codec.7.payload_type = iBLC -account.6.codec.7.priority = 0 -account.6.codec.7.rtpmap = 102 - -account.6.codec.8.enable = 0 -account.6.codec.8.payload_type = G726-16 -account.6.codec.8.priority = 0 -account.6.codec.8.rtpmap = 112 - -account.6.codec.9.enable = 0 -account.6.codec.9.payload_type = G726-24 -account.6.codec.9.priority = 0 -account.6.codec.9.rtpmap = 102 - -account.6.codec.10.enable = 0 -account.6.codec.10.payload_type = G726-32 -account.6.codec.10.priority = 0 -account.6.codec.10.rtpmap = 99 - -account.6.codec.11.enable = 0 -account.6.codec.11.payload_type = G726-40 -account.6.codec.11.priority = 0 -account.6.codec.11.rtpmap = 104 - -account.6.codec.12.enable = 0 -account.6.codec.12.payload_type = iLBC_13_3 -account.6.codec.12.priority = 0 -account.6.codec.12.rtpmap = 97 - -account.6.codec.13.enable = 0 -account.6.codec.13.payload_type = iLBC_15_2 -account.6.codec.13.priority = 0 -account.6.codec.13.rtpmap = 97 - -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.6.bw_acd_reason_code.Y = 500(lunch time) -account.6.bw_acd_reason_code.1 = -account.6.bw_acd_reason_code.2 = - -####################################################################################### -## Call Forward ## -####################################################################################### - -#Enable or disable the always forward feature for account6; 0-Disabled (default), 1-Enabled; -account.6.always_fwd.enable = - -#Configure the destination number of the always forward for account6. -account.6.always_fwd.target = - -#Configure the always forward on code and off code for account6. -account.6.always_fwd.on_code = -account.6.always_fwd.off_code = - -#Enable or disable the busy forward feature for account6; 0-Disabled (default), 1-Enabled; -account.6.busy_fwd.enable = -account.6.busy_fwd.target = -account.6.busy_fwd.on_code = -account.6.busy_fwd.off_code = - -#Enable or disable the no answer forward feature for account6; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.6.timeout_fwd.enable = -account.6.timeout_fwd.target = -account.6.timeout_fwd.timeout = -account.6.timeout_fwd.on_code = -account.6.timeout_fwd.off_code = - -#Enable or disable the phone to record the last call forward type for account6; 0-Disabled (default), 1-Enabled; -account.6.last_type = - -####################################################################################### -## DND ## -####################################################################################### - -#Enable or disable the DND feautre for account6; 0-Disabled (default), 1-Enabled; -account.6.dnd.enable = - -#Configure the DND on code and off code for account6. -account.6.dnd.on_code = -account.6.dnd.off_code = +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.1.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$user_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = {$sip_port_1} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.1.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + +#Configure the voice mail number of account 1. +voice_mail.number.1 = *97 + +#Configure the proxy server to account 1. +account.1.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.1.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = {$register_expires_1} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.1.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.1.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Assign account 1 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.1.shared_line = + +#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.1.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.1.group_pickup_code = +account.1.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.1.blf_list_code = + +#Configure the bargein code. +account.1.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.1.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.1.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.1.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.1.idle_screen_enable = + +#Define the access URL of the customized theme. +account.1.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.1.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = + +#Configure the STUN server address. +account.1.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.1.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.1.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.1.picture_info_enable = + +#Audio codecs for account 1 (Y ranges from 1 to 13). +#account.1.codec.y.enable = +#account.1.codec.y.payload_type = +#account.1.codec.y.priority = +#account.1.codec.y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =4 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = +account.1.codec.7.payload_type = +account.1.codec.7.priority = +account.1.codec.7.rtpmap = + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = G726-16 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 112 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = G726-24 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 102 + +account.1.codec.10.enable = 0 +account.1.codec.10.payload_type = G726-32 +account.1.codec.10.priority = 0 +account.1.codec.10.rtpmap = 2 + +account.1.codec.11.enable = 0 +account.1.codec.11.payload_type = G726-40 +account.1.codec.11.priority = 0 +account.1.codec.11.rtpmap = 104 + +account.1.codec.12.enable = 0 +account.1.codec.12.payload_type = iLBC_13_3 +account.1.codec.12.priority = 0 +account.1.codec.12.rtpmap = 97 + +account.1.codec.13.enable = 0 +account.1.codec.13.payload_type = iLBC_15_2 +account.1.codec.13.priority = 0 +account.1.codec.13.rtpmap = 97 + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 2; 0-Disabled (default), 1-Enabled; +account.2.enable = 1 + +#Configure the label displayed on the LCD screen for account 2. +account.2.label = {$display_name_2} + +#Configure the display name of account 2. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$user_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = {$sip_port_2} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.2.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = {$outbound_proxy_2} + +#Specify the server port, the default value is 5060. +account.2.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + +#Configure the voice mail number of account 2. +voice_mail.number.2 = *97 + +#Configure the proxy server to account 2. +account.2.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.2.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 2, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = {$register_expires_2} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.2.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.2.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.2.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Assign account 2 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.2.shared_line = + +#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.2.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 2, the settings on a per-account basis take precedence over the settings on the phone. +account.2.group_pickup_code = +account.2.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.2.blf_list_code = + +#Configure the bargein code. +account.2.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.2.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.2.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.2.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.2.idle_screen_enable = + +#Define the access URL of the customized theme. +account.2.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.2.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = + +#Configure the STUN server address. +account.2.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.2.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.2.picture_info_enable = + +#Audio codecs for account 2 (Y ranges from 1 to 13). +#account.2.codec.Y.enable = +#account.2.codec.Y.payload_type = +#account.2.codec.Y.priority = +#account.2.codec.Y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =4 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = +account.2.codec.7.payload_type = +account.2.codec.7.priority = +account.2.codec.7.rtpmap = + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = G726-16 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 112 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = G726-24 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 102 + +account.2.codec.10.enable = 0 +account.2.codec.10.payload_type = G726-32 +account.2.codec.10.priority = 0 +account.2.codec.10.rtpmap = 2 + +account.2.codec.11.enable = 0 +account.2.codec.11.payload_type = G726-40 +account.2.codec.11.priority = 0 +account.2.codec.11.rtpmap = 104 + +account.2.codec.12.enable = 0 +account.2.codec.12.payload_type = iLBC_13_3 +account.2.codec.12.priority = 0 +account.2.codec.12.rtpmap = 97 + +account.2.codec.13.enable = 0 +account.2.codec.13.payload_type = iLBC_15_2 +account.2.codec.13.priority = 0 +account.2.codec.13.rtpmap = 97 + +####################################################################################### +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 3; 0-Disabled (default), 1-Enabled; +account.3.enable = + +#Configure the label displayed on the LCD screen for account 3. +account.3.label = {$display_name_3} + +#Configure the display name of account 3. +account.3.display_name = {$display_name_3} + +#Configure the username and password for register authentication. +account.3.auth_name = {$user_id_3} +account.3.password = {$user_password_3} + +#Configure the register user name. +account.3.user_name = {$user_id_3} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.3.sip_server_host = {$server_address_3} + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = {$sip_port_3} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.3.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = {$outbound_proxy_3} + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + +#Configure the voice mail number of account 3. +voice_mail.number.3 = + +#Configure the proxy server to account 3. +account.3.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.3.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 3, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = {$register_expires_3} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.3.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.3.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.3.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Assign account 3 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.3.shared_line = + +#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.3.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 3, the settings on a per-account basis take precedence over the settings on the phone. +account.3.group_pickup_code = +account.3.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.3.blf_list_code = + +#Configure the bargein code. +account.3.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.3.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.3.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.3.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.3.idle_screen_enable = + +#Define the access URL of the customized theme. +account.3.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.3.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = + +#Configure the STUN server address. +account.3.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.3.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.3.picture_info_enable = + +#Audio codecs for account 3 (Y ranges from 1 to 13). +#account.3.codec.Y.enable = +#account.3.codec.Y.payload_type = +#account.3.codec.Y.priority = +#account.3.codec.Y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =4 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = +account.3.codec.7.payload_type = +account.3.codec.7.priority = +account.3.codec.7.rtpmap = + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = G726-16 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 112 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = G726-24 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 102 + +account.3.codec.10.enable = 0 +account.3.codec.10.payload_type = G726-32 +account.3.codec.10.priority = 0 +account.3.codec.10.rtpmap = 2 + +account.3.codec.11.enable = 0 +account.3.codec.11.payload_type = G726-40 +account.3.codec.11.priority = 0 +account.3.codec.11.rtpmap = 104 + +account.3.codec.12.enable = 0 +account.3.codec.12.payload_type = iLBC_13_3 +account.3.codec.12.priority = 0 +account.3.codec.12.rtpmap = 97 + +account.3.codec.13.enable = 0 +account.3.codec.13.payload_type = iLBC_15_2 +account.3.codec.13.priority = 0 +account.3.codec.13.rtpmap = 97 + +####################################################################################### +## Account4 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 4; 0-Disabled (default), 1-Enabled; +account.4.enable = + +#Configure the label displayed on the LCD screen for account 4. +account.4.label = {$display_name_4} + +#Configure the display name of account 4. +account.4.display_name = {$display_name_4} + +#Configure the username and password for register authentication. +account.4.auth_name = {$user_id_4} +account.4.password = {$user_password_4} + +#Configure the register user name. +account.4.user_name = {$user_id_4} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.4.sip_server_host = {$server_address_4} + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = {$sip_port_4} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.4.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = {$outbound_proxy_4} + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4== 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + +#Configure the voice mail number of account 4. +voice_mail.number.4 = + +#Configure the proxy server to account 4. +account.4.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.4.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 4, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = {$register_expires_4} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.4.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.4.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Assign account 4 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.4.shared_line = + +#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.4.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 4, the settings on a per-account basis take precedence over the settings on the phone. +account.4.group_pickup_code = +account.4.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.4.blf_list_code = + +#Configure the bargein code. +account.4.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.4.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.4.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.4.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.4.idle_screen_enable = + +#Define the access URL of the customized theme. +account.4.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.4.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = + +#Configure the STUN server address. +account.4.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + +#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.4.ringtone.ring_type = + +#Enable or disable the phone to download the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Audio codecs for account 4 (Y ranges from 1 to 13). +#account.4.codec.Y.enable = +#account.4.codec.Y.payload_type = +#account.4.codec.Y.priority = +#account.4.codec.Y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =4 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = +account.4.codec.7.payload_type = +account.4.codec.7.priority = +account.4.codec.7.rtpmap = + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = G726-16 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 112 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = G726-24 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 102 + +account.4.codec.10.enable = 0 +account.4.codec.10.payload_type = G726-32 +account.4.codec.10.priority = 0 +account.4.codec.10.rtpmap = 2 + +account.4.codec.11.enable = 0 +account.4.codec.11.payload_type = G726-40 +account.4.codec.11.priority = 0 +account.4.codec.11.rtpmap = 104 + +account.4.codec.12.enable = 0 +account.4.codec.12.payload_type = iLBC_13_3 +account.4.codec.12.priority = 0 +account.4.codec.12.rtpmap = 97 + +account.4.codec.13.enable = 0 +account.4.codec.13.payload_type = iLBC_15_2 +account.4.codec.13.priority = 0 +account.4.codec.13.rtpmap = 97 + +####################################################################################### +## Account5 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 5; 0-Disabled (default), 1-Enabled; +account.5.enable = + +#Configure the label displayed on the LCD screen for account 5. +account.5.label = {$display_name_5} + +#Configure the display name of account 5. +account.5.display_name = {$display_name_5} + +#Configure the username and password for register authentication. +account.5.auth_name = {$user_id_5} +account.5.password = {$user_password_5} + +#Configure the register user name. +account.5.user_name = {$user_id_5} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.5.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.5.sip_server_host = {$server_address_5} + +#Specify the port for the SIP server. The default value is 5060. +account.5.sip_server_port = {$sip_port_5} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.5.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.5.outbound_host = {$outbound_proxy_5} + +#Specify the server port, the default value is 5060. +account.5.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.5.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.5.backup_outbound_port = + +#Configure the voice mail number of account 5. +voice_mail.number.5 = + +#Configure the proxy server to account 5. +account.5.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.5.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.5.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +#Configure the SIP port for account 5, the default value is 5060. +account.5.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.expires = {$register_expires_5} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.5.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.5.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.5.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.5.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.5.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + +#Assign account 5 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.5.shared_line = + +#Configure BLA number for account 5 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.5.bla_number = +account.5.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.5.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 5, the settings on a per-account basis take precedence over the settings on the phone. +account.5.group_pickup_code = +account.5.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.5.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.5.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 5 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.5.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.5.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.5.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.5.blf_list_code = + +#Configure the bargein code. +account.5.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.5.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.5.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.5.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.5.idle_screen_enable = + +#Define the access URL of the customized theme. +account.5.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.5.enable_signal_encode = + +#Configure the key for encoding. +account.5.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.5.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.5.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = + +#Configure the STUN server address. +account.5.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.5.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.5.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.5.advanced.timer_t1 = +account.5.advanced.timer_t2 = +account.5.advanced.timer_t4 = + +#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.5.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.5.picture_info_enable = + +#Audio codecs for account5 (Y ranges from 1 to 13). +#account.5.codec.Y.enable = +#account.5.codec.Y.payload_type = +#account.5.codec.Y.priority = +#account.5.codec.Y.rtpmap = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =4 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = +account.5.codec.7.payload_type = +account.5.codec.7.priority = +account.5.codec.7.rtpmap = + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = G726-16 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 112 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = G726-24 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 102 + +account.5.codec.10.enable = 0 +account.5.codec.10.payload_type = G726-32 +account.5.codec.10.priority = 0 +account.5.codec.10.rtpmap = 2 + +account.5.codec.11.enable = 0 +account.5.codec.11.payload_type = G726-40 +account.5.codec.11.priority = 0 +account.5.codec.11.rtpmap = 104 + +account.5.codec.12.enable = 0 +account.5.codec.12.payload_type = iLBC_13_3 +account.5.codec.12.priority = 0 +account.5.codec.12.rtpmap = 97 + +account.5.codec.13.enable = 0 +account.5.codec.13.payload_type = iLBC_15_2 +account.5.codec.13.priority = 0 +account.5.codec.13.rtpmap = 97 + +####################################################################################### +## Account6 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 6; 0-Disabled (default), 1-Enabled; +account.6.enable = + +#Configure the label displayed on the LCD screen for account 6. +account.6.label = {$display_name_6} + +#Configure the display name of account 6. +account.6.display_name = {$display_name_6} + +#Configure the username and password for register authentication. +account.6.auth_name = {$user_id_6} +account.6.password = {$user_id_6} + +#Configure the register user name. +account.6.user_name = {$user_id_6} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.6.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.6.sip_server_host = {$server_address_6} + +#Specify the port for the SIP server. The default value is 5060. +account.6.sip_server_port = {$sip_port_6} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.6.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.6.outbound_host = {$outbound_proxy_6} + +#Specify the server port, the default value is 5060. +account.6.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.6.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.6.backup_outbound_port = + +#Configure the voice mail number of account 6. +voice_mail.number.6 = + +#Configure the proxy server to account 6. +account.6.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.6.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.6.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = + +#Configure the SIP port for account 6, the default value is 5060. +account.6.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.6.expires = {$register_expires_6} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.6.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.6.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.6.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.6.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.6.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.6.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.6.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.6.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.6.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.6.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.6.ptime = + +#Assign account 6 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.6.shared_line = + +#Configure BLA number for account 6 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.6.bla_number = +account.6.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.6.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 6, the settings on a per-account basis take precedence over the settings on the phone. +account.6.group_pickup_code = +account.6.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.6.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.6.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.6.register_mac = +account.6.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 6 fails to register. It ranges from 0 to 1800, the default value is 30. +account.6.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.6.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.6.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.6.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.6.blf_list_code = + +#Configure the bargein code. +account.6.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.6.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.6.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.6.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.6.idle_screen_enable = + +#Define the access URL of the customized theme. +account.6.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.6.enable_signal_encode = + +#Configure the key for encoding. +account.6.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.6.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.6.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.6.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.6.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.6.nat.nat_traversal = + +#Configure the STUN server address. +account.6.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.6.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.6.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.6.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.6.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.6.advanced.timer_t1 = +account.6.advanced.timer_t2 = +account.6.advanced.timer_t4 = + +#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.6.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.6.picture_info_enable = + +#Audio codecs for account6 (Y ranges from 1 to 13). +#account.6.codec.Y.enable = +#account.6.codec.Y.payload_type = +#account.6.codec.Y.priority = +#account.6.codec.Y.rtpmap = + +account.6.codec.1.enable = 1 +account.6.codec.1.payload_type = PCMU +account.6.codec.1.priority = 1 +account.6.codec.1.rtpmap = 0 + +account.6.codec.2.enable = 1 +account.6.codec.2.payload_type = PCMA +account.6.codec.2.priority = 2 +account.6.codec.2.rtpmap = 8 + +account.6.codec.3.enable = 0 +account.6.codec.3.payload_type = G723_53 +account.6.codec.3.priority =4 +account.6.codec.3.rtpmap = 4 + +account.6.codec.4.enable = 0 +account.6.codec.4.payload_type = G723_63 +account.6.codec.4.priority = 0 +account.6.codec.4.rtpmap = 4 + +account.6.codec.5.enable = 1 +account.6.codec.5.payload_type = G729 +account.6.codec.5.priority = 3 +account.6.codec.5.rtpmap = 18 + +account.6.codec.6.enable = 1 +account.6.codec.6.payload_type = G722 +account.6.codec.6.priority = 4 +account.6.codec.6.rtpmap = 9 + +account.6.codec.7.enable = +account.6.codec.7.payload_type = +account.6.codec.7.priority = +account.6.codec.7.rtpmap = + +account.6.codec.8.enable = 0 +account.6.codec.8.payload_type = G726-16 +account.6.codec.8.priority = 0 +account.6.codec.8.rtpmap = 112 + +account.6.codec.9.enable = 0 +account.6.codec.9.payload_type = G726-24 +account.6.codec.9.priority = 0 +account.6.codec.9.rtpmap = 102 + +account.6.codec.10.enable = 0 +account.6.codec.10.payload_type = G726-32 +account.6.codec.10.priority = 0 +account.6.codec.10.rtpmap = 2 + +account.6.codec.11.enable = 0 +account.6.codec.11.payload_type = G726-40 +account.6.codec.11.priority = 0 +account.6.codec.11.rtpmap = 104 + +account.6.codec.12.enable = 0 +account.6.codec.12.payload_type = iLBC_13_3 +account.6.codec.12.priority = 0 +account.6.codec.12.rtpmap = 97 + +account.6.codec.13.enable = 0 +account.6.codec.13.payload_type = iLBC_15_2 +account.6.codec.13.priority = 0 +account.6.codec.13.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### + +#Enable or disable the always forward; 0-Disabled (default), 1-Enabled; +forward.always.enable = + +#Configure the target number that the phone will forward the call to. +forward.always.target = + +#Configure the on code and off code to always forward. +forward.always.on_code = +forward.always.off_code = + +#Enable or disable the busy forward; 0-Disabled (default), 1-Enabled; +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10. +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; +forward.international.enable = diff --git a/resources/templates/provision/yealink/t32g/y000000000032.cfg b/resources/templates/provision/yealink/t32g/y000000000032.cfg new file mode 100644 index 0000000000..fbdda984d6 --- /dev/null +++ b/resources/templates/provision/yealink/t32g/y000000000032.cfg @@ -0,0 +1,1215 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server. +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Configure the PC port type; 0-Router, 1-Bridge (default); +#Require reboot; +network.bridge_mode = + +#Configure the IP address and mask when the PC port is configured as Router. +#Require reboot; +network.pc_port.ip = +network.pc_port.mask = + +#Enable or disable the DHCP server when the PC port is configured as Router; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.pc_port.dhcp_server = + +#Define the DHCP IP address range. The default is from 10.0.0.10 to 10.0.0.100. +network.dhcp.start_ip = +network.dhcp.end_ip = + +#Enable or disable the VLAN of WAN port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vlan.pc_port_enable = + +#Configure the VLAN ID, it ranges from 0 to 4094, the default value is 1. +#Require reboot; +network.vlan.pc_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.pc_port_priority = + +#Configure the access type of the web server; 0-Disabled, 1-HTTP & HTTPS (default), 2-HTTP Only, 3-HTTPS Only; +#Require reboot; +network.web_server_type = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 46. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-EAP-MD5, 2-EAP-TLS, 3-PEAP-MSCHAPV2; +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 120. +#Require reboot; +network.lldp.packet_interval = + +#Enable or disable the phone to obtain DNS from DHCP; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.static_dns_enable = + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the IP address of the syslog server. +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## TR069 ## +####################################################################################### + +#The TR069 feature is only applicable to some designated firmware versions. +#All settings of TR069 require reboot. +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; +managementserver.enable = + +#Configure the username and password for the phone to authenticate with the ACS. +managementserver.username = +managementserver.password = + +#Configure the access URL of the ACS. +managementserver.url = + +#Configure the username and password for the phone to authenticate the connection requests. +managementserver.connection_request_username = +managementserver.connection_request_password = + +#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; +managementserver.periodic_inform_enable = + +#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. +managementserver.periodic_inform_interval = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled (default); +auto_provision.pnp_enable = + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enable = + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly; +#auto_provision.weekly.mask = 0123456 +#auto_provision.weekly.begin_time = 00:00 +#auto_provision.weekly.end_time = 00:00 + +auto_provision.weekly.mask = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Configure the username and password for downloading. +auto_provision.server.username = +auto_provision.server.password = + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_option.enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. +#Require reboot; +#"X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.name = + +#Configure the auto provisioning code. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.x.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.user = +#autoprovision.x.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.x.com_aes = +#autoprovision.x.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + +autoprovision.2.name = +autoprovision.2.code = +autoprovision.2.url = +autoprovision.2.user = +autoprovision.2.password = +autoprovision.2.com_aes = +autoprovision.2.mac_aes = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); +sip.use_23_as_pound = + +#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; +sip.rfc2543_hold = + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +sip.check_autop_result_before_register = + +sip.send_response_by_request = + +#Enable or disable the phone to reboot when receiving SIP notify messages; 0-Disabled, 1-Enabled (default); +sip.notify_reboot_enable = + +#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); +watch_dog.enable = + +#Enable or disable the redirect feature; 0-Disabled (default), 1-Enabled; +redirect.enable = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled,1-Enabled(default); +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default); +transfer.dsskey_deal_type = + +#Enable or disable the conference initiator to transfer the call when hanging up; +#0-Disabled(default),1-Enabled; +transfer.tran_others_after_conf_enable = + +####################################################################################### +## Voice ## +####################################################################################### + +#Enable or disable the voice activity detection feature; 0-Disbaled (default), 1-Enabled; +voice.vad = + +#Enable or disable the comfortable noise generator; 0-Disabled, 1-Enabled (default); +voice.cng = + +#Enable or disable the echo canceller; 0-Disabled, 1-Enabled (default); +voice.echo_cancellation = + +#Configure the volume of the side tone. It ranges from -48 to 0, the default value is -3. +voice.side_tone= + +#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29. +#Require reboot; +voice.handfree_send = +voice.handset_send = +voice.headset_send = + +#Configure the type of jitter buffer; 0-Fixed, 1-Adaptive (default); +voice.jib.adaptive = + +#Configure the minimum delay, maximum delay and normal delay. The default values are 0, 300, 120. +voice.jib.min = +voice.jib.max = +voice.jib.normal = + +#Define the voice tone, the valid values can be Custom (default) or voice tone of different countries. For example, United States, France, Germany and so on. +#voice.tone.country = Custom +voice.tone.country = + +#Customize the tone when the "voice.tone.country" is configured as Custom. +#The value format: Frequency/Duration. +#Frequency ranges from 200 to 7000. When 0 is used to define the frequency, it means a pause between tones. +#A tone can be composited at most four different frequencies (the value format is: F1+F2+F3+F4). +#Duration is the time duration (in milliseconds) of ringing the tone. It ranges from 0 to 30000ms. +#At most eight tones can be configured for dial, ring, busy and so on, each tone is separated by comma. +#For example, voice.tone.dial = 100/200,200/150,300+400+500+1200/1000,0/1200,500+900/800,5000+2000+3000/6000,0/1500,3600/1800 +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.congestion = +voice.tone.callwaiting = +voice.tone.dialrecall = +voice.tone.record= +voice.tone.info = +voice.tone.stutter = +voice.tone.message = +voice.tone.autoanswer = + +#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.spk_vol = +voice.handset.spk_vol = +voice.headset.spk_vol = + +#Configure the dial tone volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 8. +voice.handfree.tone_vol = +voice.handset.tone_vol = +voice.headset.tone_vol = + +#Configure the ring volume. It ranges from 0 to 15, the default value is 8. +voice.ring_vol= + +#Configure the Speaker volume when in the group listening mode. It ranges from 0 to 15, the default value is 8. +voice.group_spk_vol = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = + +#Define the login username and password of the user, var and administrator. +#If your username is defined as: security.user_name.admin = adminuser. +#and your password must like this: security.user_password = adminuser:adminpassword. +#adminuser is the value of "security.user_name.admin"; adminpassword is the password you want to set. +#security.user_name.admin = adminuser +#security.user_password = adminuser:adminpwd +#security.user_name.user = user1 +#security.user_password = user1:user1pwd +#security.user_name.var = varuser +#security.user_password = varuser:adminpwd + +security.user_name.user = +security.user_name.admin = +security.user_name.var = +security.user_password = + +#Enable or disable the 3-level permissions (open var); 0-Disabled (default), 1-Enabled; +#Require reboot; +security.var_enable = + +####################################################################################### +## Customize the softkey ## +####################################################################################### +#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking. +custom_softkey_call_failed.url = +custom_softkey_call_in.url = +custom_softkey_connecting.url = +custom_softkey_dialing.url = +custom_softkey_ring_back.url = +custom_softkey_talking.url = + +####################################################################################### +## Memory Key (For T38G only) ## +####################################################################################### +#X ranges from 1 to 10; +#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. +#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. +#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. +#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. +#memorykey.x.type--Assign the desired feature to the memory key. +#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS +# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL +# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser +# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group +#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#memorykey.x.sub_type = + +# Configure Memory Key1 +memorykey.1.line = +memorykey.1.value = +memorykey.1.pickup_value = +memorykey.1.type = +memorykey.1.xml_phonebook = +memorykey.1.sub_type = + +# Configure Memory Key2 +memorykey.2.line = +memorykey.2.value = +memorykey.2.pickup_value = +memorykey.2.type = +memorykey.2.xml_phonebook = +memorykey.2.sub_type = + +# Configure Memory Key3 +memorykey.3.line = +memorykey.3.value = +memorykey.3.pickup_value = +memorykey.3.type = +memorykey.3.xml_phonebook = +memorykey.3.sub_type = + +# Configure DSS Key4 +memorykey.4.line = +memorykey.4.value = +memorykey.4.pickup_value = +memorykey.4.type = +memorykey.4.xml_phonebook = +memorykey.4.sub_type = + +# Configure Memory Key5 +memorykey.5.line = +memorykey.5.value = +memorykey.5.pickup_value = +memorykey.5.type = +memorykey.5.xml_phonebook = +memorykey.5.sub_type = + +# Configure Memory Key6 +memorykey.6.line = +memorykey.6.value = +memorykey.6.pickup_value = +memorykey.6.type = +memorykey.6.xml_phonebook = +memorykey.6.sub_type = + +# Configure Memory Key7 +memorykey.7.line = +memorykey.7.value = +memorykey.7.pickup_value = +memorykey.7.type = +memorykey.7.xml_phonebook = +memorykey.7.sub_type = + +# Configure Memory Key8 +memorykey.8.line = +memorykey.8.value = +memorykey.8.pickup_value = +memorykey.8.type = +memorykey.8.xml_phonebook = +memorykey.8.sub_type = + +# Configure Memory Key9 +memorykey.9.line = +memorykey.9.value = +memorykey.9.pickup_value = +memorykey.9.type = +memorykey.9.xml_phonebook = +memorykey.9.sub_type = + +# Configure Memory Key10 +memorykey.10.line = +memorykey.10.value = +memorykey.10.pickup_value = +memorykey.10.type = +memorykey.10.xml_phonebook = +memorykey.10.sub_type = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + +#Configure Line Key1 +linekey.1.line = +linekey.1.value = +linekey.1.pickup_value = +linekey.1.type = +linekey.1.xml_phonebook = +linekey.1.label = + +#Configure Line Key2 +linekey.2.line = +linekey.2.value = +linekey.2.pickup_value = +linekey.2.type = +linekey.2.xml_phonebook = +linekey.2.label = + +#Configure Line Key3 +linekey.3.line = +linekey.3.value = +linekey.3.pickup_value = +linekey.3.type = +linekey.3.xml_phonebook = +linekey.3.label = + +#Configure Line Key4 (for T38G only) +linekey.4.line = +linekey.4.value = +linekey.4.pickup_value = +linekey.4.type = +linekey.4.xml_phonebook = +linekey.4.label = + +#Configure Line Key5 (for T38G only) +linekey.5.line = +linekey.5.value = +linekey.5.pickup_value = +linekey.5.type = +linekey.5.xml_phonebook = +linekey.5.label = + +#Configure Line Key6 (for T38G only) +linekey.6.line = +linekey.6.value = +linekey.6.pickup_value = +linekey.6.type = +linekey.6.xml_phonebook = +linekey.6.label = + +########################################################################################## +## Programmable Key (For T38G only) ## +########################################################################################## +#X ranges from 1 to 15. +#programablekey.x.type--Customize the programmable key type. +#The valid types are: +#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom +#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook +#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock +#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. +#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. +#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. + +#programablekey.x.value = +#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#programablekey.x.history_type = + +#programablekey.x.label--This parameter is only available to the key 1 to key 4. + +programablekey.1.type = +programablekey.1.line = +programablekey.1.value = +programablekey.1.xml_phonebook = +programablekey.1.history_type = +programablekey.1.label = + +########################################################################################## +## Expansion Key Ł¨For T38G onlyŁ© ## +########################################################################################## +#X ranges from 1 to 6, Y ranges from 1 to 39. +#expansion_module.x.key.y.type = 37 (Switch by default) +#expansion_module.x.key.y.line = 0 +#expansion_module.x.key.y.value = +#expansion_module.x.key.y.pickup_value = +#expansion_module.x.key.y.label = + +#Each expansion module1 key1 +expansion_module.1.key.1.type = +expansion_module.1.key.1.line = +expansion_module.1.key.1.value = +expansion_module.1.key.1.pickup_value = +expansion_module.1.key.1.label = + +#Each expansion module1 key2 +expansion_module.1.key.2.type = +expansion_module.1.key.2.line = +expansion_module.1.key.2.value = +expansion_module.1.key.2.pickup_value = +expansion_module.1.key.2.label = + +#Each expansion module2 key1 +expansion_module.2.key.1.type = +expansion_module.2.key.1.line = +expansion_module.2.key.1.value = +expansion_module.2.key.1.pickup_value = +expansion_module.2.key.1.label = + +####################################################################################### +## Automatic Call Distribute ## +####################################################################################### +#Enable or disable the phone to automatically change the phone status to available; 0-Disabled (default), 1-Enabled; +acd.auto_available = + +#Configure the interval (in seconds) to automatically turn the state of the ACD agent to available. It ranges from 0 to 120, the default value is 60. +acd.auto_available_timer = + +####################################################################################### +# Action URL Settings ## +####################################################################################### + +#action_url.setup_completed--Inform the server that the phone has completed the startup. +#action_url.dnd_on-- Inform the server that the DND is activated on the phone. +#The value format is: http://IP address of server/help.xml?variable name=variable value. +#The valid variable values are: $mac--MAC address of phone, $ip--The current IP address of phone, $model--Phone model, $firmware--Phone firmware version. +#$active_url--The SIP URI of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_user--The username of the current account when the phone is in the incoming state, outgoing state or during conversation. +#$active_host--The host name of the current account when the phone is in the incoming state, the outgoing state or during conversation. +#$local--The SIP URI of the caller when outgoing calls or the SIP URI of the callee when receiving calls. +#$remote--The SIP URI of the callee when outgoing calls or the SIP URI of the caller when receiving calls. +#$display_local--The display name of the caller when outgoing calls or the display name of the callee when receiving calls. +#$display_remote--The display name of the callee when outgoing calls or the display name of the caller when receiving calls. +#$call_id--The caller ID when in the incoming state, the outgoing state or during conversation. +#For example, action_url.log_on = http://192.168.1.20/help.xml?mac=$mac + +action_url.setup_completed = +action_url.log_on = +action_url.log_off = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = +action_url.transfer_finished = +action_url.transfer_failed = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, Turkish, Portuguese, Spanish, Italian, French, Russian, Deutsch and Czech. +lang.wui = + +#Specify the LCD language, the valid values are: English (default), Chinese_S, Chinese_T, German, French, Turkish, Italian, Polish, Spanish and Portuguese. +#lang.gui = English +lang.gui = + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = +local_time.ntp_server2 = + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = + +#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank. +local_time.offset_time = + +#Configure the time format; 0-12 Hour, 1-24 Hour (default); +local_time.time_format = + +#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; +local_time.date_format = + +#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = + +#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. +local_time.manual_time_enable = + +####################################################################################### +## Hot Desking ## +####################################################################################### +#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled; +#hotdesking.startup_register_name_enable = 0 (default) +#hotdesking.startup_username_enable = 1 (default) +#hotdesking.startup_password_enable = 1 (default) +#hotdesking.startup_sip_server_enable = 1 (default) +#hotdesking.startup_outbound_enable = 0 (default) + +hotdesking.startup_register_name_enable = +hotdesking.startup_username_enable = +hotdesking.startup_password_enable = +hotdesking.startup_sip_server_enable = +hotdesking.startup_outbound_enable = + +#Enable or disable the phone to show the following items on the login wizard when pressing the Hot Desking DSS key; +#0-Disabled, 1-Enabled; +#hotdesking.dsskey_register_name_enable = 0 (default) +#hotdesking.dsskey_username_enable = 1 (default) +#hotdesking.dsskey_password_enable = 1 (default) +#hotdesking.dsskey_sip_server_enable = 1 (default) +#hotdesking.dsskey_outbound_enable = 0 (default) + +hotdesking.dsskey_register_name_enable = +hotdesking.dsskey_username_enable = +hotdesking.dsskey_password_enable = +hotdesking.dsskey_sip_server_enable = +hotdesking.dsskey_outbound_enable = + +####################################################################################### +## Distinctive Ring Tones ## +####################################################################################### + +#"X" ranges from 1 to 10; +#Configure the text to map the keywords contained in the "Alert-info" header. +#distinctive_ring_tones.alert_info.X.text = family +distinctive_ring_tones.alert_info.1.text = + +#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav. +#distinctive_ring_tones.alert_info.X.ringer = 1 +distinctive_ring_tones.alert_info.1.ringer = + +####################################################################################### +## Auto Redial ## +####################################################################################### + +#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; +auto_redial.enable = + +#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. +auto_redial.interval = + +#Configure the times of auto redialing . It ranges from 1 to 300. The default value is 10. +auto_redial.times = + +####################################################################################### +## Zero Touch ## +####################################################################################### +#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; +zero_touch.enable = + +#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. +zero_touch.wait_time = + +####################################################################################### +## Push XML ## +####################################################################################### + +push_xml.server = + +#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; +push_xml.block_in_calling = + +#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; +push_xml.sip_notify = + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = + +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma. E.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the dialnow rule. X ranges from 1 to 20. +#dialplan.dialnow.rule.x = +#dialplan.dialnow.line_id.x = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 20. +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## BSFT Phonebook ## +####################################################################################### + +#Configuration of BW phonebook. X ranges from 1 to 6. +#bw_phonebook.data.x.server = +#bw_phonebook.data.x.port = +#bw_phonebook.data.x.username = +#bw_phonebook.data.x.password = +#bw_phonebook.data.x.name = + +bw_phonebook.data.1.server = +bw_phonebook.data.1.port = +bw_phonebook.data.1.username = +bw_phonebook.data.1.password = +bw_phonebook.data.1.name = + +####################################################################################### +## BSFT Call Log ## +####################################################################################### + +#Configuration of the BW call log. X ranges from 1 to 3. +#bw_call_log.data.x.server = +#bw_call_log.data.x.port = +#bw_call_log.data.x.username = +#bw_call_log.data.x.password = +#bw_call_log.data.x.name = + +bw_call_log.data.1.server = +bw_call_log.data.1.port = +bw_call_log.data.1.username = +bw_call_log.data.1.password = +bw_call_log.data.1.name = + +#Enable or disable the phone to access the BSFT call log/phonebook directly when pressing the History/Directory soft keys; +#0-Disabled (default), 1-Enabled; +#Require reboot; +bw.calllog_and_dir = + +#Specify whether to display the BSFT call log on the web user interface; 0-Disabled, 1-Enabled (default); +#Require reboot; +bw.behave_calllog = + +#Specify whether to display the BSFT directory on the web user interface; 0-Disabled, 1-Enable (default); +#Require reboot; +bw.behave_bw_dir = + +#Enable or disable the feature key synchronization; 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +####################################################################################### +## Remote phonebook ## +####################################################################################### + +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +#remote_phonebook.data.x.url = +#remote_phonebook.data.x.name = + +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +####################################################################################### +## LDAP Settings ## +####################################################################################### +#Configure the search criteria for name and number lookups. +ldap.name_filter = +ldap.number_filter = + +ldap.host = 0.0.0.0 +ldap.port = 389 + +ldap.base = +ldap.user = +ldap.password = + +#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. +ldap.max_hits = + +ldap.name_attr = +ldap.numb_attr = +ldap.display_name = + +#Configure the LDAP version. The valid value is 2 or 3 (default). +ldap.version = + +#Conifugre the search delay time. It ranges from 0 to 2000 (default). +ldap.search_delay = + +#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; +ldap.call_in_lookup = + +#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; +ldap.ldap_sort = + +#Enable or disable the phone to query the LDAP server when in the pre-dialing or the dialing state; 0-Disabled (default), 1-Enabled; +ldap.dial_lookup = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 +features.dnd_refuse_code = + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = + +#Enable or disable the call completion feature; 0-Disabled (default), 1-Enabled; +features.call_completion_enable = + +features.dnd.on_code = +features.dnd.off_code = + +#Enable or disable the phone to receive the emergency call when in the DND mode; 0-Disabled, 1-Enabled (default); +features.dnd.emergency_enable = + +#Specify the emergency number, multiple numbers (at most three) are separated by comma. +features.dnd.emergency_authorized_number = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); +features.intercom.allow = + +#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; +features.intercom.mute = + +#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); +features.intercom.tone = + +#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); +features.intercom.barge = + +#Specify whether to display the contact name in the remote phonebook; 0-Disabled (default), 1-Enabled; +features.remote_phonebook.enable = + +#Set the interval (in seconds) the phone updates the remote phonebook. The default value is 3600. +features.remote_phonebook.flash_time = + +#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 2. +features.hotline_number = +features.hotline_delay = + +#Configure the repetition times of DTMF end packet. The valid values are 1, 2, 3 (default). +features.dtmf.repetition = + +#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. +features.busy_tone_delay = + +#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; +features.pound_key.mode = + +#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); +features.send_key_tone = +features.key_tone = + +features.redial_tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; +#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); +features.action_uri_limit_ip = + +#Enable or disable the transfer DSS key to perform the blind transfer; 0-Disabled, 1-Enabled (default); +features.dsskey_blind_tran = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = + +#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); +#Require reboot; +features.direct_ip_call_enable = + +#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; +features.ringer_device.is_use_headset = + +#Enable or disable the phone to pick up the call using the group pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.group_pickup_enable = + +#Configure the group pickup code. +features.pickup.group_pickup_code = + +#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled; +features.pickup.direct_pickup_enable = + +#Configure the directed pickup code. +features.pickup.direct_pickup_code = + +#Specify the way to notify the phone of the incoming call of the monitored user by visual or audio indicator; +#0-Disabled (default), 1-Enabled; +features.pickup.blf_visual_enable = +features.pickup.blf_audio_enable = + +#Enable or disable the phone to turn off the indicator LEDs of BLF and Call Park keys when the monitored states is idle. +#0-Disabled (default), 1-Enabled; +features.blf_and_callpark_idle_led_enable = + +#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. +phone_setting.inter_digit_time = + +#Configure the flash hook time (in milliseconds). It ranges from 0 to 799, the default value is 1. +phone_setting.flash_hook_timer = + +#Configure the keypad lock type; 0-Disabled (default), 1-Menu Key, 2-Function Key, 3-All Keys, 4-Lock&Answer; +phone_setting.lock = + +#Set the unlock password and expiry time (in seconds) of phone lock. It ranges from 0 to 3600, the default value of expiry time is 10. +phone_setting.phone_lock.unlock_pin = +phone_setting.phone_lock.lock_time_out = + +#Configure the ring tone for the phone. System ring tones are: Ring1.wav (default), Ring2.wavˇ­ˇ­Ring8.wav. +#You can configure the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Busy.wav +phone_setting.ring_type = + +#Configure the active backlight level. It ranges from 1 to 10, the default value is 2. +#The same level for different phones may result in different backlight intensities. +#The backlight level of T2xP ranges from 1 to 3. +phone_setting.active_backlight_level = + +#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. +phone_setting.inactive_backlight_level = + +#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800. +phone_setting.backlight_time = + +#Configure the phone background. +#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png +#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png +phone_setting.backgrounds = + +#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800. +phone_setting.screen_saver_time = + +#Configure the ring tone when the transfer fails. The valid values are: Ring1.wav.... Ring8.wav. +#phone_setting.ring_for_tranfailed = Ring1.wav +phone_setting.ring_for_tranfailed = + +#Enable or disable the phone to show the logon wizard during startup; 0-Disabled (default), 1-Enabled; +phone_setting.logon_wizard = + +#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; +phone_setting.predial_autodial = + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = + +#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1. +phone_setting.dialnow_delay = + +#Enable or disable the user to customize the softkey layout; 0-Disabled (default), 1-Enabled; +phone_setting.custom_softkey_enable = + +#Configure the phone theme; 0-Theme1 (default), 1-Theme2, 2-Theme3, 3-Theme4; +phone_setting.theme = + +#Configure the emergency number, each separated by comma. The default value is 112,911,110. +phone_setting.emergency.number = + +#Enable or disable the phone to display the short message automatically; 0-Disabled, 1-Enabled (default); +phone_setting.sms_popup_enable = + +#Enable or disable the phone to turn off the power LED when it is idle; 0-Disabled (default), 1-Enabled; +phone_setting.common_power_led_enable = + +#Enable or disable the phone to flash the power LED when receiving new voice mail or message; 0-Disabled (default), 1-Enabled; +phone_setting.mail_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when muting a call; 0-Disabled (default), 1-Enabled; +phone_setting.mute_power_led_flash_enable = + +#Enable or disable the phone to flash the power LED when placing a calll on hold; 0-Disabled (default), 1-Enabled; +phone_setting.hold_power_led_flash_enable = + +####################################################################################### +## Configure the access URL of firmware ## +####################################################################################### +firmware.url = + +####################################################################################### +## Configure the access URL of the customized ringtones ## +####################################################################################### +ringtone.url = + +#ringtone.delete = http://localhost/all,delete all the customized ring tones. +ringtone.delete = + +####################################################################################### +## Configure the access URL of language file ## +####################################################################################### +gui_lang.url = + +#gui_lang.delete =http://localhost/all, delete all the customized languages. +gui_lang.delete = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates. +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate. +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Dialnow Rule/Replace Rule ## +####################################################################################### +local_contact.data.url = +auto_dst.url = +dialplan_dialnow.url = +dialplan_replace_rule.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations. +custom_factory_configuration.url = + +####################################################################################### +## Call List ## +####################################################################################### +#Configure the access URL for downloading the call list. +#Require reboot +call_list.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar. +openvpn.url = + +####################################################################################### +## Configure the access URL of the Wallpaper ## +####################################################################################### +wallpaper_upload.url = + +####################################################################################### +## Configure the access URL of the Screensaver ## +####################################################################################### +#Configure the access URL for downloading the customized wallpaper. +screen_saver.pic.url = + +####################################################################################### +## Configuration files for Var ## +####################################################################################### +#Configure the access URL for downloading the files for var. +#Require reboot +web_item_level.url = + diff --git a/resources/templates/provision/yealink/t32g/{$mac}.cfg b/resources/templates/provision/yealink/t32g/{$mac}.cfg new file mode 100644 index 0000000000..ef0849cff9 --- /dev/null +++ b/resources/templates/provision/yealink/t32g/{$mac}.cfg @@ -0,0 +1,1887 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.1.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$user_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = {$sip_port_1} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.1.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + +#Configure the voice mail number of account 1. +voice_mail.number.1 = *97 + +#Configure the proxy server to account 1. +account.1.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.1.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = {$register_expires_1} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.1.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.1.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Assign account 1 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.1.shared_line = + +#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.1.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.1.group_pickup_code = +account.1.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.1.blf_list_code = + +#Configure the bargein code. +account.1.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.1.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.1.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.1.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.1.idle_screen_enable = + +#Define the access URL of the customized theme. +account.1.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.1.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = + +#Configure the STUN server address. +account.1.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.1.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +#Assign a ringtone for account 1. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.1.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.1.picture_info_enable = + +#Audio codecs for account 1 (Y ranges from 1 to 13). +#account.1.codec.y.enable = +#account.1.codec.y.payload_type = +#account.1.codec.y.priority = +#account.1.codec.y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =4 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = +account.1.codec.7.payload_type = +account.1.codec.7.priority = +account.1.codec.7.rtpmap = + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = G726-16 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 112 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = G726-24 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 102 + +account.1.codec.10.enable = 0 +account.1.codec.10.payload_type = G726-32 +account.1.codec.10.priority = 0 +account.1.codec.10.rtpmap = 2 + +account.1.codec.11.enable = 0 +account.1.codec.11.payload_type = G726-40 +account.1.codec.11.priority = 0 +account.1.codec.11.rtpmap = 104 + +account.1.codec.12.enable = 0 +account.1.codec.12.payload_type = iLBC_13_3 +account.1.codec.12.priority = 0 +account.1.codec.12.rtpmap = 97 + +account.1.codec.13.enable = 0 +account.1.codec.13.payload_type = iLBC_15_2 +account.1.codec.13.priority = 0 +account.1.codec.13.rtpmap = 97 + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 2; 0-Disabled (default), 1-Enabled; +account.2.enable = 1 + +#Configure the label displayed on the LCD screen for account 2. +account.2.label = {$display_name_2} + +#Configure the display name of account 2. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$user_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = {$sip_port_2} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.2.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = {$outbound_proxy_2} + +#Specify the server port, the default value is 5060. +account.2.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + +#Configure the voice mail number of account 2. +voice_mail.number.2 = *97 + +#Configure the proxy server to account 2. +account.2.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.2.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 2, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = {$register_expires_2} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.2.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.2.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.2.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Assign account 2 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.2.shared_line = + +#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.2.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 2, the settings on a per-account basis take precedence over the settings on the phone. +account.2.group_pickup_code = +account.2.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.2.blf_list_code = + +#Configure the bargein code. +account.2.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.2.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.2.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.2.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.2.idle_screen_enable = + +#Define the access URL of the customized theme. +account.2.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.2.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = + +#Configure the STUN server address. +account.2.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +#Assign a ringtone for account 2. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.2.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.2.picture_info_enable = + +#Audio codecs for account 2 (Y ranges from 1 to 13). +#account.2.codec.Y.enable = +#account.2.codec.Y.payload_type = +#account.2.codec.Y.priority = +#account.2.codec.Y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =4 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = +account.2.codec.7.payload_type = +account.2.codec.7.priority = +account.2.codec.7.rtpmap = + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = G726-16 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 112 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = G726-24 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 102 + +account.2.codec.10.enable = 0 +account.2.codec.10.payload_type = G726-32 +account.2.codec.10.priority = 0 +account.2.codec.10.rtpmap = 2 + +account.2.codec.11.enable = 0 +account.2.codec.11.payload_type = G726-40 +account.2.codec.11.priority = 0 +account.2.codec.11.rtpmap = 104 + +account.2.codec.12.enable = 0 +account.2.codec.12.payload_type = iLBC_13_3 +account.2.codec.12.priority = 0 +account.2.codec.12.rtpmap = 97 + +account.2.codec.13.enable = 0 +account.2.codec.13.payload_type = iLBC_15_2 +account.2.codec.13.priority = 0 +account.2.codec.13.rtpmap = 97 + +####################################################################################### +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 3; 0-Disabled (default), 1-Enabled; +account.3.enable = + +#Configure the label displayed on the LCD screen for account 3. +account.3.label = {$display_name_3} + +#Configure the display name of account 3. +account.3.display_name = {$display_name_3} + +#Configure the username and password for register authentication. +account.3.auth_name = {$user_id_3} +account.3.password = {$user_password_3} + +#Configure the register user name. +account.3.user_name = {$user_id_3} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.3.sip_server_host = {$server_address_3} + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = {$sip_port_3} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.3.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = {$outbound_proxy_3} + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + +#Configure the voice mail number of account 3. +voice_mail.number.3 = + +#Configure the proxy server to account 3. +account.3.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.3.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 3, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = {$register_expires_3} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.3.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.3.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.3.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Assign account 3 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.3.shared_line = + +#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.3.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 3, the settings on a per-account basis take precedence over the settings on the phone. +account.3.group_pickup_code = +account.3.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.3.blf_list_code = + +#Configure the bargein code. +account.3.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.3.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.3.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.3.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.3.idle_screen_enable = + +#Define the access URL of the customized theme. +account.3.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.3.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = + +#Configure the STUN server address. +account.3.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +#Assign a ringtone for account 3. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.3.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.3.picture_info_enable = + +#Audio codecs for account 3 (Y ranges from 1 to 13). +#account.3.codec.Y.enable = +#account.3.codec.Y.payload_type = +#account.3.codec.Y.priority = +#account.3.codec.Y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =4 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = +account.3.codec.7.payload_type = +account.3.codec.7.priority = +account.3.codec.7.rtpmap = + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = G726-16 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 112 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = G726-24 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 102 + +account.3.codec.10.enable = 0 +account.3.codec.10.payload_type = G726-32 +account.3.codec.10.priority = 0 +account.3.codec.10.rtpmap = 2 + +account.3.codec.11.enable = 0 +account.3.codec.11.payload_type = G726-40 +account.3.codec.11.priority = 0 +account.3.codec.11.rtpmap = 104 + +account.3.codec.12.enable = 0 +account.3.codec.12.payload_type = iLBC_13_3 +account.3.codec.12.priority = 0 +account.3.codec.12.rtpmap = 97 + +account.3.codec.13.enable = 0 +account.3.codec.13.payload_type = iLBC_15_2 +account.3.codec.13.priority = 0 +account.3.codec.13.rtpmap = 97 + +####################################################################################### +## Account4 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 4; 0-Disabled (default), 1-Enabled; +account.4.enable = + +#Configure the label displayed on the LCD screen for account 4. +account.4.label = {$display_name_4} + +#Configure the display name of account 4. +account.4.display_name = {$display_name_4} + +#Configure the username and password for register authentication. +account.4.auth_name = {$user_id_4} +account.4.password = {$user_password_4} + +#Configure the register user name. +account.4.user_name = {$user_id_4} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.4.sip_server_host = {$server_address_4} + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = {$sip_port_4} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.4.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = {$outbound_proxy_4} + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4== 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + +#Configure the voice mail number of account 4. +voice_mail.number.4 = + +#Configure the proxy server to account 4. +account.4.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.4.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 4, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = {$register_expires_4} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.4.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.4.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Assign account 4 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.4.shared_line = + +#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.4.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 4, the settings on a per-account basis take precedence over the settings on the phone. +account.4.group_pickup_code = +account.4.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.4.blf_list_code = + +#Configure the bargein code. +account.4.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.4.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.4.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.4.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.4.idle_screen_enable = + +#Define the access URL of the customized theme. +account.4.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.4.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = + +#Configure the STUN server address. +account.4.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + +#Assign a ringtone for account 4. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.4.ringtone.ring_type = + +#Enable or disable the phone to download the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.4.picture_info_enable = + +#Audio codecs for account 4 (Y ranges from 1 to 13). +#account.4.codec.Y.enable = +#account.4.codec.Y.payload_type = +#account.4.codec.Y.priority = +#account.4.codec.Y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =4 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = +account.4.codec.7.payload_type = +account.4.codec.7.priority = +account.4.codec.7.rtpmap = + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = G726-16 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 112 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = G726-24 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 102 + +account.4.codec.10.enable = 0 +account.4.codec.10.payload_type = G726-32 +account.4.codec.10.priority = 0 +account.4.codec.10.rtpmap = 2 + +account.4.codec.11.enable = 0 +account.4.codec.11.payload_type = G726-40 +account.4.codec.11.priority = 0 +account.4.codec.11.rtpmap = 104 + +account.4.codec.12.enable = 0 +account.4.codec.12.payload_type = iLBC_13_3 +account.4.codec.12.priority = 0 +account.4.codec.12.rtpmap = 97 + +account.4.codec.13.enable = 0 +account.4.codec.13.payload_type = iLBC_15_2 +account.4.codec.13.priority = 0 +account.4.codec.13.rtpmap = 97 + +####################################################################################### +## Account5 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 5; 0-Disabled (default), 1-Enabled; +account.5.enable = + +#Configure the label displayed on the LCD screen for account 5. +account.5.label = {$display_name_5} + +#Configure the display name of account 5. +account.5.display_name = {$display_name_5} + +#Configure the username and password for register authentication. +account.5.auth_name = {$user_id_5} +account.5.password = {$user_password_5} + +#Configure the register user name. +account.5.user_name = {$user_id_5} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.5.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.5.sip_server_host = {$server_address_5} + +#Specify the port for the SIP server. The default value is 5060. +account.5.sip_server_port = {$sip_port_5} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.5.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.5.outbound_host = {$outbound_proxy_5} + +#Specify the server port, the default value is 5060. +account.5.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.5.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.5.backup_outbound_port = + +#Configure the voice mail number of account 5. +voice_mail.number.5 = + +#Configure the proxy server to account 5. +account.5.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.5.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.5.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +#Configure the SIP port for account 5, the default value is 5060. +account.5.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.expires = {$register_expires_5} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.5.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.5.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.5.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.5.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.5.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + +#Assign account 5 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.5.shared_line = + +#Configure BLA number for account 5 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.5.bla_number = +account.5.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.5.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 5, the settings on a per-account basis take precedence over the settings on the phone. +account.5.group_pickup_code = +account.5.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.5.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.5.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 5 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.5.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.5.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.5.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.5.blf_list_code = + +#Configure the bargein code. +account.5.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.5.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.5.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.5.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.5.idle_screen_enable = + +#Define the access URL of the customized theme. +account.5.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.5.enable_signal_encode = + +#Configure the key for encoding. +account.5.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.5.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.5.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = + +#Configure the STUN server address. +account.5.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.5.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.5.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.5.advanced.timer_t1 = +account.5.advanced.timer_t2 = +account.5.advanced.timer_t4 = + +#Assign a ringtone for account 5. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.5.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.5.picture_info_enable = + +#Audio codecs for account5 (Y ranges from 1 to 13). +#account.5.codec.Y.enable = +#account.5.codec.Y.payload_type = +#account.5.codec.Y.priority = +#account.5.codec.Y.rtpmap = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =4 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = +account.5.codec.7.payload_type = +account.5.codec.7.priority = +account.5.codec.7.rtpmap = + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = G726-16 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 112 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = G726-24 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 102 + +account.5.codec.10.enable = 0 +account.5.codec.10.payload_type = G726-32 +account.5.codec.10.priority = 0 +account.5.codec.10.rtpmap = 2 + +account.5.codec.11.enable = 0 +account.5.codec.11.payload_type = G726-40 +account.5.codec.11.priority = 0 +account.5.codec.11.rtpmap = 104 + +account.5.codec.12.enable = 0 +account.5.codec.12.payload_type = iLBC_13_3 +account.5.codec.12.priority = 0 +account.5.codec.12.rtpmap = 97 + +account.5.codec.13.enable = 0 +account.5.codec.13.payload_type = iLBC_15_2 +account.5.codec.13.priority = 0 +account.5.codec.13.rtpmap = 97 + +####################################################################################### +## Account6 Settings (For T38G only) ## +####################################################################################### + +#Enable or disable the account 6; 0-Disabled (default), 1-Enabled; +account.6.enable = + +#Configure the label displayed on the LCD screen for account 6. +account.6.label = {$display_name_6} + +#Configure the display name of account 6. +account.6.display_name = {$display_name_6} + +#Configure the username and password for register authentication. +account.6.auth_name = {$user_id_6} +account.6.password = {$user_id_6} + +#Configure the register user name. +account.6.user_name = {$user_id_6} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.6.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.6.sip_server_host = {$server_address_6} + +#Specify the port for the SIP server. The default value is 5060. +account.6.sip_server_port = {$sip_port_6} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.6.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.6.outbound_host = {$outbound_proxy_6} + +#Specify the server port, the default value is 5060. +account.6.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.6.backup_outbound_host = + +#Specify the port, the default value is 5060. +account.6.backup_outbound_port = + +#Configure the voice mail number of account 6. +voice_mail.number.6 = + +#Configure the proxy server to account 6. +account.6.proxy_require = + +#Enable or disable the use of the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.6.srv_ttl_timer_enable = + +#Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; +#Require reboot; +account.6.dns_srv_type = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.6.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = + +#Configure the SIP port for account 6, the default value is 5060. +account.6.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.6.expires = {$register_expires_6} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.6.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.6.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.6.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.6.subscribe_mwi_expires = + +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.6.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.6.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.6.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.6.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.6.enable_user_equal_phone = + +#Specify whether to encrypt the SIP messages; 0-Disabled, 1-Forced, 2-Negotiated; +account.6.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.6.ptime = + +#Assign account 6 as shared line; 0-Disabled (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.6.shared_line = + +#Configure BLA number for account 6 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.6.bla_number = +account.6.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.6.dialoginfo_callpickup = + +#Configure the directed and group pickup codes for account 6, the settings on a per-account basis take precedence over the settings on the phone. +account.6.group_pickup_code = +account.6.direct_pickup_code = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.6.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.6.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.6.register_mac = +account.6.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 6 fails to register. It ranges from 0 to 1800, the default value is 30. +account.6.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.6.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.6.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.6.blf.blf_list_uri = + +#Configure the pickup code of BLF List. +account.6.blf_list_code = + +#Configure the bargein code. +account.6.blf_list_barge_in_code = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.6.blf.subscribe_period = + +#Configure the ACD subscribe period (in seconds). It ranges from 120 to 3600 (default). +account.6.subscribe_acd_expires = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.6.sip_server_type = + +#Enable or disable the phone to use the customized theme; 0-Disabled (default), 1-Enabled; +account.6.idle_screen_enable = + +#Define the access URL of the customized theme. +account.6.idle_screen_url = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.6.enable_signal_encode = + +#Configure the key for encoding. +account.6.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.6.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.6.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.6.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.6.compact_header_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.6.nat.nat_traversal = + +#Configure the STUN server address. +account.6.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.6.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.6.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.6.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.6.nat.rport = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.6.advanced.timer_t1 = +account.6.advanced.timer_t2 = +account.6.advanced.timer_t4 = + +#Assign a ringtone for account 6. The system ring tones are: common.wav (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Ring2.wav +account.6.ringtone.ring_type = + +#Enable or disable the phone to display the picture when receiving the specified SIP message; 0-Disabled, 1-Enabled (default); +account.6.picture_info_enable = + +#Audio codecs for account6 (Y ranges from 1 to 13). +#account.6.codec.Y.enable = +#account.6.codec.Y.payload_type = +#account.6.codec.Y.priority = +#account.6.codec.Y.rtpmap = + +account.6.codec.1.enable = 1 +account.6.codec.1.payload_type = PCMU +account.6.codec.1.priority = 1 +account.6.codec.1.rtpmap = 0 + +account.6.codec.2.enable = 1 +account.6.codec.2.payload_type = PCMA +account.6.codec.2.priority = 2 +account.6.codec.2.rtpmap = 8 + +account.6.codec.3.enable = 0 +account.6.codec.3.payload_type = G723_53 +account.6.codec.3.priority =4 +account.6.codec.3.rtpmap = 4 + +account.6.codec.4.enable = 0 +account.6.codec.4.payload_type = G723_63 +account.6.codec.4.priority = 0 +account.6.codec.4.rtpmap = 4 + +account.6.codec.5.enable = 1 +account.6.codec.5.payload_type = G729 +account.6.codec.5.priority = 3 +account.6.codec.5.rtpmap = 18 + +account.6.codec.6.enable = 1 +account.6.codec.6.payload_type = G722 +account.6.codec.6.priority = 4 +account.6.codec.6.rtpmap = 9 + +account.6.codec.7.enable = +account.6.codec.7.payload_type = +account.6.codec.7.priority = +account.6.codec.7.rtpmap = + +account.6.codec.8.enable = 0 +account.6.codec.8.payload_type = G726-16 +account.6.codec.8.priority = 0 +account.6.codec.8.rtpmap = 112 + +account.6.codec.9.enable = 0 +account.6.codec.9.payload_type = G726-24 +account.6.codec.9.priority = 0 +account.6.codec.9.rtpmap = 102 + +account.6.codec.10.enable = 0 +account.6.codec.10.payload_type = G726-32 +account.6.codec.10.priority = 0 +account.6.codec.10.rtpmap = 2 + +account.6.codec.11.enable = 0 +account.6.codec.11.payload_type = G726-40 +account.6.codec.11.priority = 0 +account.6.codec.11.rtpmap = 104 + +account.6.codec.12.enable = 0 +account.6.codec.12.payload_type = iLBC_13_3 +account.6.codec.12.priority = 0 +account.6.codec.12.rtpmap = 97 + +account.6.codec.13.enable = 0 +account.6.codec.13.payload_type = iLBC_15_2 +account.6.codec.13.priority = 0 +account.6.codec.13.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### + +#Enable or disable the always forward; 0-Disabled (default), 1-Enabled; +forward.always.enable = + +#Configure the target number that the phone will forward the call to. +forward.always.target = + +#Configure the on code and off code to always forward. +forward.always.on_code = +forward.always.off_code = + +#Enable or disable the busy forward; 0-Disabled (default), 1-Enabled; +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10. +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = + +#Enable or disable the phone to forward the call to the international number (the prefix is 00); 0-Disabled (default), 1-Enabled; +forward.international.enable = diff --git a/resources/templates/provision/yealink/t38g/{$mac}.cfg b/resources/templates/provision/yealink/t38g/{$mac}.cfg index bf1bc8e69a..ef0849cff9 100644 --- a/resources/templates/provision/yealink/t38g/{$mac}.cfg +++ b/resources/templates/provision/yealink/t38g/{$mac}.cfg @@ -23,30 +23,33 @@ account.1.password = {$user_password_1} account.1.user_name = {$user_id_1} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.1.sip_trust_ctrl = +account.1.sip_trust_ctrl = 1 #Configure the SIP server address. account.1.sip_server_host = {$server_address_1} #Specify the port for the SIP server. The default value is 5060. -account.1.sip_server_port = 5060 +account.1.sip_server_port = {$sip_port_1} -#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.1.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.1.outbound_host = +account.1.outbound_host = {$outbound_proxy_1} #Specify the server port, the default value is 5060. account.1.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.1.transport = 1 +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.1.backup_outbound_host = -#Specify the port, the default value is 5060. +#Specify the port of the backup outbound proxy server, the default value is 5060. account.1.backup_outbound_port = #Configure the voice mail number of account 1. @@ -77,13 +80,13 @@ account.1.reject_anonymous_call = account.1.anonymous_reject_oncode = account.1.anonymous_reject_offcode = -#Configure the SIP port for account 1, the default value is 5060. +#Configure the SIP port for account 1, the default value is 5060. account.1.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.1.expires = +account.1.expires = {$register_expires_1} -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.1.100rel_enable = #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; @@ -102,13 +105,13 @@ account.1.subscribe_mwi_expires = account.1.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.1.cp_source = +account.1.cp_source = -#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.1.session_timer.enable = +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.1.session_timer.expires = +account.1.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.1.session_timer.refresher = @@ -145,8 +148,10 @@ account.1.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.1.subscribe_mwi_to_vm = -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.1.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. @@ -205,7 +210,7 @@ account.1.compact_header_enable = ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.1.nat.nat_traversal = +account.1.nat.nat_traversal = #Configure the STUN server address. account.1.nat.stun_server = @@ -327,30 +332,33 @@ account.2.password = {$user_password_2} account.2.user_name = {$user_id_2} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.2.sip_trust_ctrl = +account.2.sip_trust_ctrl = 1 #Configure the SIP server address. account.2.sip_server_host = {$server_address_2} #Specify the port for the SIP server. The default value is 5060. -account.2.sip_server_port = 5060 +account.2.sip_server_port = {$sip_port_2} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.2.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.2.outbound_host = +account.2.outbound_host = {$outbound_proxy_2} #Specify the server port, the default value is 5060. account.2.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.2.transport = +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.2.backup_outbound_host = -#Specify the port, the default value is 5060. +#Specify the port of the backup outbound proxy server, the default value is 5060. account.2.backup_outbound_port = #Configure the voice mail number of account 2. @@ -385,7 +393,7 @@ account.2.anonymous_reject_offcode = account.2.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.2.expires = +account.2.expires = {$register_expires_2} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.2.100rel_enable = @@ -394,7 +402,7 @@ account.2.100rel_enable = account.2.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; -account.2.subscribe_register = +account.2.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi = @@ -405,14 +413,14 @@ account.2.subscribe_mwi_expires = #Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; account.2.cid_source = -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.2.cp_source = -#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.2.session_timer.enable = +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.2.session_timer.expires = +account.2.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.2.session_timer.refresher = @@ -449,8 +457,10 @@ account.2.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi_to_vm = -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.2.register_line = #Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. @@ -493,7 +503,7 @@ account.2.enable_signal_encode = account.2.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.2.dtmf.type = +account.2.dtmf.type = #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.2.dtmf.dtmf_payload = @@ -509,7 +519,7 @@ account.2.compact_header_enable = ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.2.nat.nat_traversal = +account.2.nat.nat_traversal = #Configure the STUN server address. account.2.nat.stun_server = @@ -526,7 +536,7 @@ account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.2.nat.rport = -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = account.2.advanced.timer_t2 = account.2.advanced.timer_t4 = @@ -618,43 +628,46 @@ account.2.codec.13.rtpmap = 97 account.3.enable = #Configure the label displayed on the LCD screen for account 3. -account.3.label = +account.3.label = {$display_name_3} #Configure the display name of account 3. -account.3.display_name = +account.3.display_name = {$display_name_3} #Configure the username and password for register authentication. -account.3.auth_name = -account.3.password = +account.3.auth_name = {$user_id_3} +account.3.password = {$user_password_3} #Configure the register user name. -account.3.user_name = +account.3.user_name = {$user_id_3} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.3.sip_trust_ctrl = +account.3.sip_trust_ctrl = 1 #Configure the SIP server address. -account.3.sip_server_host = +account.3.sip_server_host = {$server_address_3} #Specify the port for the SIP server. The default value is 5060. -account.3.sip_server_port = +account.3.sip_server_port = {$sip_port_3} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.3.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.3.outbound_host = +account.3.outbound_host = {$outbound_proxy_3} #Specify the server port, the default value is 5060. account.3.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.3.transport = +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.3.backup_outbound_host = -#Specify the port, the default value is 5060. +#Specify the port of the backup outbound proxy server, the default value is 5060. account.3.backup_outbound_port = #Configure the voice mail number of account 3. @@ -689,7 +702,7 @@ account.3.anonymous_reject_offcode = account.3.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.3.expires = +account.3.expires = {$register_expires_3} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.3.100rel_enable = @@ -710,13 +723,13 @@ account.3.subscribe_mwi_expires = account.3.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.3.cp_source = +account.3.cp_source = #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.3.session_timer.enable = +account.3.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.3.session_timer.expires = +account.3.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.3.session_timer.refresher = @@ -753,8 +766,10 @@ account.3.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.3.subscribe_mwi_to_vm = -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); account.3.register_line = #Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. @@ -806,7 +821,7 @@ account.3.dtmf.dtmf_payload = account.3.dtmf.info_type = #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; -account.3.compact_header_enable = +account.3.compact_header_enable = ######################################################################### ## NAT Settings ## @@ -830,7 +845,7 @@ account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.3.nat.rport = -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = account.3.advanced.timer_t2 = account.3.advanced.timer_t4 = @@ -895,7 +910,7 @@ account.3.codec.9.priority = 0 account.3.codec.9.rtpmap = 102 account.3.codec.10.enable = 0 -account.3.codec.10.payload_type = G726-32 +account.3.codec.10.payload_type = G726-32 account.3.codec.10.priority = 0 account.3.codec.10.rtpmap = 2 @@ -922,43 +937,46 @@ account.3.codec.13.rtpmap = 97 account.4.enable = #Configure the label displayed on the LCD screen for account 4. -account.4.label = +account.4.label = {$display_name_4} #Configure the display name of account 4. -account.4.display_name = +account.4.display_name = {$display_name_4} #Configure the username and password for register authentication. -account.4.auth_name = -account.4.password = +account.4.auth_name = {$user_id_4} +account.4.password = {$user_password_4} #Configure the register user name. -account.4.user_name = +account.4.user_name = {$user_id_4} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.4.sip_trust_ctrl = +account.4.sip_trust_ctrl = 1 #Configure the SIP server address. -account.4.sip_server_host = +account.4.sip_server_host = {$server_address_4} #Specify the port for the SIP server. The default value is 5060. -account.4.sip_server_port = +account.4.sip_server_port = {$sip_port_4} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.4.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.4.outbound_host = +account.4.outbound_host = {$outbound_proxy_4} #Specify the server port, the default value is 5060. account.4.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.4.transport = +{if $sip_transport_4== 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.4.backup_outbound_host = -#Specify the port, the default value is 5060. +#Specify the port of the backup outbound proxy server, the default value is 5060. account.4.backup_outbound_port = #Configure the voice mail number of account 4. @@ -989,11 +1007,11 @@ account.4.reject_anonymous_call = account.4.anonymous_reject_oncode = account.4.anonymous_reject_offcode = -#Configure the SIP port for account 4, the default value is 5060. +#Configure the SIP port for account 4, the default value is 5060. account.4.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.4.expires = +account.4.expires = {$register_expires_4} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.4.100rel_enable = @@ -1016,11 +1034,11 @@ account.4.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.4.cp_source = -#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.4.session_timer.enable = +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.4.session_timer.expires = +account.4.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.4.session_timer.refresher = @@ -1057,8 +1075,10 @@ account.4.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.4.subscribe_mwi_to_vm = -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); account.4.register_line = #Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. @@ -1134,7 +1154,7 @@ account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.4.nat.rport = -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = account.4.advanced.timer_t2 = account.4.advanced.timer_t4 = @@ -1229,38 +1249,41 @@ account.4.codec.13.rtpmap = 97 account.5.enable = #Configure the label displayed on the LCD screen for account 5. -account.5.label = +account.5.label = {$display_name_5} #Configure the display name of account 5. -account.5.display_name = +account.5.display_name = {$display_name_5} #Configure the username and password for register authentication. -account.5.auth_name = -account.5.password = +account.5.auth_name = {$user_id_5} +account.5.password = {$user_password_5} #Configure the register user name. -account.5.user_name = +account.5.user_name = {$user_id_5} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.5.sip_trust_ctrl = +account.5.sip_trust_ctrl = 1 #Configure the SIP server address. -account.5.sip_server_host = +account.5.sip_server_host = {$server_address_5} #Specify the port for the SIP server. The default value is 5060. -account.5.sip_server_port = +account.5.sip_server_port = {$sip_port_5} -#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.5.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.5.outbound_host = +account.5.outbound_host = {$outbound_proxy_5} #Specify the server port, the default value is 5060. account.5.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.5.transport = +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.5.backup_outbound_host = @@ -1300,7 +1323,7 @@ account.5.anonymous_reject_offcode = account.5.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.5.expires = +account.5.expires = {$register_expires_5} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.5.100rel_enable = @@ -1320,14 +1343,14 @@ account.5.subscribe_mwi_expires = #Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; account.5.cid_source = -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.5.cp_source = +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.5.cp_source = -#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.5.session_timer.enable = +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.5.session_timer.expires = +account.5.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.5.session_timer.refresher = @@ -1364,7 +1387,7 @@ account.5.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.5.subscribe_mwi_to_vm = -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; account.5.register_mac = account.5.register_line = @@ -1533,38 +1556,41 @@ account.5.codec.13.rtpmap = 97 account.6.enable = #Configure the label displayed on the LCD screen for account 6. -account.6.label = +account.6.label = {$display_name_6} #Configure the display name of account 6. -account.6.display_name = +account.6.display_name = {$display_name_6} #Configure the username and password for register authentication. -account.6.auth_name = -account.6.password = +account.6.auth_name = {$user_id_6} +account.6.password = {$user_id_6} #Configure the register user name. -account.6.user_name = +account.6.user_name = {$user_id_6} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; -account.6.sip_trust_ctrl = +account.6.sip_trust_ctrl = 1 #Configure the SIP server address. -account.6.sip_server_host = +account.6.sip_server_host = {$server_address_6} #Specify the port for the SIP server. The default value is 5060. -account.6.sip_server_port = +account.6.sip_server_port = {$sip_port_6} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.6.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. -account.6.outbound_host = +account.6.outbound_host = {$outbound_proxy_6} #Specify the server port, the default value is 5060. -account.6.outbound_port = +account.6.outbound_port = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -account.6.transport = +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.6.backup_outbound_host = @@ -1584,7 +1610,7 @@ account.6.srv_ttl_timer_enable = #Configure the type of DNS-SRV query; 0-UDP, TCP and TLS (default), 1-UDP, 2-TCP, 3-TLS; #Require reboot; -account.6.dns_srv_type = +account.6.dns_srv_type = #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.6.anonymous_call = @@ -1604,7 +1630,7 @@ account.6.anonymous_reject_offcode = account.6.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. -account.6.expires = +account.6.expires = {$register_expires_6} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.6.100rel_enable = @@ -1625,13 +1651,13 @@ account.6.subscribe_mwi_expires = account.6.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.6.cp_source = +account.6.cp_source = -#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; -account.6.session_timer.enable = +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.6.session_timer.expires = +account.6.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.6.session_timer.refresher = @@ -1839,7 +1865,7 @@ forward.always.enable = #Configure the target number that the phone will forward the call to. forward.always.target = -#Configure the on code and off code of always forward. +#Configure the on code and off code to always forward. forward.always.on_code = forward.always.off_code = @@ -1849,7 +1875,7 @@ forward.busy.target = forward.busy.on_code = forward.busy.off_code = -#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; +#Enable or disable the no answer forward; 0-Disabled (default), 1-Enabled; #Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 10. forward.no_answer.enable = forward.no_answer.target = diff --git a/resources/templates/provision/yealink/vp530/y0000000000530.cfg b/resources/templates/provision/yealink/vp530/y0000000000530.cfg new file mode 100644 index 0000000000..ad54905dc2 --- /dev/null +++ b/resources/templates/provision/yealink/vp530/y0000000000530.cfg @@ -0,0 +1,1021 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, submask, gateway and DNS server. +#Require reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns = +network.secondary_dns = + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = + +#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 11800. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 40. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-Enabled (EAP-MD5); +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60. +#Require reboot; +network.lldp.packet_interval = + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the syslog mode; 1-Local, 2-Server; +#Require reboot; +syslog.mode = + +#Configure the IP address of the syslog server; +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## TR069 ## +####################################################################################### + +#The TR069 feature is only applicable to some designated firmware versions; +#All settings of TR069 require reboot; +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; +managementserver.enable = + +#Configure the username and password for the phone to authenticate with the ACS; +managementserver.username = +managementserver.password = + +#Configure the access URL of the ACS; +managementserver.url = + +#Configure the username and password for the phone to authenticate the connection requests; +managementserver.connection_request_username = +managementserver.connection_request_password = + +#Enable or disable the phone to inform the ACS of its configuration; 0-Disabled (default), 1-Enabled; +managementserver.periodic_inform_enable = 0 + +#Configure the interval (in seconds) the phone to inform the ACS of its configuration. The default value is 60. +managementserver.periodic_inform_interval = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled(default); +auto_provision.pnp_enable = + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enalbe = 0 + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly. +auto_provision.weekly.mask = 0123456 +auto_provision.weekly.begin_time = 00:00 +auto_provision.weekly.end_time = 00:00 + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = + +#Configure the username and password for downloading. +auto_provision.server.username = +auto_provision.server.password = + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by dialing a predefined string on the phone, when there is no available accounts. +#Require reboot; +# "X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The value format is String, the maximum length is 100; +#autoprovision.x.name = + +#Configure the auto provisioning code. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.x.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.x.user = +#autoprovision.x.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.x.com_aes = +#autoprovision.x.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + +autoprovision.2.name = +autoprovision.2.code = +autoprovision.2.url = +autoprovision.2.user = +autoprovision.2.password = +autoprovision.2.com_aes = +autoprovision.2.mac_aes = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to escape the pound key as percent sign followed by 23 when dialing out; 0-Disabled, 1-Enabled (default); +sip.use_23_as_pound = + +#Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; +sip.rfc2543_hold = + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +#Enable or disable the WatchDog feature; 0-Disabled, 1-Enabled (default); +watch_dog.enable = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled (default), 1-Enabled; +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Enable or disable the conference initiator to transfer the call when hanging up; +#0-Disabled (default), 1-Enabled; +transfer.tran_others_after_conf_enable = + +#Enable or disable to access the web user interface of phone using the http/https protocol; +#0-Disabled,1-Enabled (default); +#Require Reboot; +wui.https_enable = +wui.http_enable = + +#Enable or disable the feature key synchronization, 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +#Enable or disable the conference feature on the phone, 0-Disabled, 1-Enabled(default); +#Require reboot; +features.conference_enable = + +#Enable or disable the hoteling feature, 0-Disabled (default), 1-Enabled; +#Require reboot; +features.hoteling.enable = + +#Enable or disable the ACD feature on the phone, 0-Disabled (default), 1-Enabled; +#Require reboot; +acd.enable = + +####################################################################################### +## Voice ## +####################################################################################### + +#Configure the receiving volume of Speaker, Handset and Headset. It ranges from 0 to 15, the default value is 5. +voice.handfree.spk_vol = +voice.handset.spk_vol = +voice.headset.spk_vol = + +#Configure the ring volume. It ranges from 0 to 15, the default value is 5. +voice.ring_vol = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = + +#Set the password of the user or the administrator, the value format is: user:password or admin:password; +#security.user_password = admin:admin123 +security.user_password = + +####################################################################################### +## DSS Key ## +####################################################################################### + +#memorykey.x.line: Configure the desired line to apply the key feature. It ranges from 0 to 4. +#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. +#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. +#memorykey.x.value: Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. +#memorykey.x.pickup_value: Enter the pickup code, this parameter is only appilicable to BLF. +#memorykey.x.type: Assign the desired feature to the memory key. +#Valid types are:: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 10-Call Park +# 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL 18-Group Listening 19-Public Hold 20-Private Hold +# 21-Shared Line 22-XML Group 23-Group Pickup 24- Paging 25-Record 27-XMLbrowser 35-URLRecord 37-Switch 38-LDAP 39-BLF List +# 40-Prefix 41- Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group +#memorykey.x.xml_phonebook: Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. +#memorykey.x.label: configure the label for each key dispalying on LCD screen. + +# Configure DSS Key1 +memorykey.1.line = +memorykey.1.value = +memorykey.1.pickup_value = +memorykey.1.type = +memorykey.1.xml_phonebook = +memorykey.1.label = + +# Configure DSS Key2 +memorykey.2.line = +memorykey.2.value = +memorykey.2.pickup_value = +memorykey.2.type = +memorykey.2.xml_phonebook = +memorykey.2.label = + +# Configure DSS Key3 +memorykey.3.line = +memorykey.3.value = +memorykey.3.pickup_value = +memorykey.3.type = +memorykey.3.xml_phonebook = +memorykey.3.label = + +# Configure DSS Key4 +memorykey.4.line = +memorykey.4.value = +memorykey.4.pickup_value = +memorykey.4.type = +memorykey.4.xml_phonebook = +memorykey.4.label = + +# Configure DSS Key5 +memorykey.5.line = +memorykey.5.value = +memorykey.5.pickup_value = +memorykey.5.type = +memorykey.5.xml_phonebook = +memorykey.5.label = + +# Configure DSS Key6 +memorykey.6.line = +memorykey.6.value = +memorykey.6.pickup_value = +memorykey.6.type = +memorykey.6.xml_phonebook = +memorykey.6.label = + +# Configure DSS Key7 +memorykey.7.line = +memorykey.7.value = +memorykey.7.pickup_value = +memorykey.7.type = +memorykey.7.xml_phonebook = +memorykey.7.label = + +# Configure DSS Key8 +memorykey.8.line = +memorykey.8.value = +memorykey.8.pickup_value = +memorykey.8.type = +memorykey.8.xml_phonebook = +memorykey.8.label = + +# Configure DSS Key9 +memorykey.9.line = +memorykey.9.value = +memorykey.9.pickup_value = +memorykey.9.type = +memorykey.9.xml_phonebook = +memorykey.9.label = + +# Configure DSS Key10 +memorykey.10.line = +memorykey.10.value = +memorykey.10.pickup_value = +memorykey.10.type = +memorykey.10.xml_phonebook = +memorykey.10.label = + +# Configure DSS Key11 +memorykey.11.line = +memorykey.11.value = +memorykey.11.pickup_value = +memorykey.11.type = +memorykey.11.xml_phonebook = +memorykey.11.label = + +# Configure DSS Key12 +memorykey.12.line = +memorykey.12.value = +memorykey.12.pickup_value = +memorykey.12.type = +memorykey.12.xml_phonebook = +memorykey.12.label = + +# Configure DSS Key13 +memorykey.13.line = +memorykey.13.value = +memorykey.13.pickup_value = +memorykey.13.type = +memorykey.13.xml_phonebook = +memorykey.13.label = + +# Configure DSS Key14 +memorykey.14.line = +memorykey.14.value = +memorykey.14.pickup_value = +memorykey.14.type = +memorykey.14.xml_phonebook = +memorykey.14.label = + +# Configure DSS Key15 +memorykey.15.line = +memorykey.15.value = +memorykey.15.pickup_value = +memorykey.15.type = +memorykey.15.xml_phonebook = +memorykey.15.label = + +# Configure DSS Key16 +memorykey.16.line = +memorykey.16.value = +memorykey.16.pickup_value = +memorykey.16.type = +memorykey.16.xml_phonebook = +memorykey.16.label = + +# Configure DSS Key17 +memorykey.17.line = +memorykey.17.value = +memorykey.17.pickup_value = +memorykey.17.type = +memorykey.17.xml_phonebook = +memorykey.17.label = + +# Configure DSS Key18 +memorykey.18.line = +memorykey.18.value = +memorykey.18.pickup_value = +memorykey.18.type = +memorykey.18.xml_phonebook = +memorykey.18.label = + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 4. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. + +#Configure Linekey1 +linekey.1.line = +linekey.1.value = +linekey.1.pickup_value = +linekey.1.type = +linekey.1.xml_phonebook = +linekey.1.label = + +#Configure Linekey2 +linekey.2.line = +linekey.2.value = +linekey.2.pickup_value = +linekey.2.type = +linekey.2.xml_phonebook = +linekey.2.label = + +#Configure Linekey3 +linekey.3.line = +linekey.3.value = +linekey.3.pickup_value = +linekey.3.type = +linekey.3.xml_phonebook = +linekey.3.label = + +#Configure Linekey4 +linekey.4.line = +linekey.4.value = +linekey.4.pickup_value = +linekey.4.type = +linekey.4.xml_phonebook = +linekey.4.label = + +####################################################################################### +# Action URL ## +####################################################################################### + +#action_url.incoming_call: configure the phone to send message to the specified server when receiving incoming call; +#action_url.dnd_on: configure the phone to send message to the specified server when DND feature is activated; +#The value format is: http://IP address of server/help.xml?mac=$mac +#action_url.log_on = http://192.168.1.20/help.xml?mac=$mac + +action_url.setup_completed = +action_url.log_on = +action_url.log_off = +action_url.register_failed = +action_url.off_hook = +action_url.on_hook = +action_url.incoming_call = +action_url.outgoing_call = +action_url.call_established = +action_url.dnd_on = +action_url.dnd_off = +action_url.always_fwd_on = +action_url.always_fwd_off = +action_url.busy_fwd_on = +action_url.busy_fwd_off = +action_url.no_answer_fwd_on = +action_url.no_answer_fwd_off = +action_url.transfer_call = +action_url.blind_transfer_call = +action_url.attended_transfer_call = +action_url.hold = +action_url.unhold = +action_url.mute = +action_url.unmute = +action_url.missed_call = +action_url.call_terminated = +action_url.busy_to_idle = +action_url.idle_to_busy = + +#Configure the phone to send message to the specified server when changing the IP address; +action_url.ip_change = + +#Configure the phone to send message to the specified server when forwarding or rejecting incoming call, or answering new incoming call; +action_url.forward_incoming_call = +action_url.reject_incoming_call = +action_url.answer_new_incoming_call = + +#Configure the phone to send message to the specified server when transfer finished/transfer failed; +action_url.transfer_finished = +action_url.transfer_failed = + +#Configure the phone to send message to the specified server when rejecting the new incoming call; +action_url.reject_new_incoming_call = + +#Configure the phone to send message to the specified server when the phone cancels to call out,the remote called party is busy or the remote party cancels the call; +action_url.cancel_callout = +action_url.remote_busy = +action_url.call_remote_canceled = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, German, Italian and Turkish; +lang.wui = + +#Specify the LCD language, the valid values are: English (default), Chinese_S, German, French, Turkish, Italiano, Polish and Portungues; +lang.gui = English + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = +local_time.ntp_server2 = + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = 1000 + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = 2 + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = 0 + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = 1/1/0 + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = 12/31/23 + +#Configure the offset time (in minutes). It ranges from -300 to 300, the default value is 60. +local_time.offset_time = + +#Configure the time format, 0-12 Hour, 1-24 Hour (default); +local_time.time_format = + +#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM; +local_time.date_format = + +#Enable or disable the DHCP time, 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = + +####################################################################################### +## Auto Redial ## +####################################################################################### + +#Enable or disable the auto redial feature; 0-Disabled (default), 1-Enabled; +auto_redial.enable = + +#Configure the interval (in seconds) to wait before redial. It ranges from 1 to 300. The default value is 10. +auto_redial.interval = 10 + +#Configure the times of auto redialing. It ranges from 1 to 300. The default value is 10. +auto_redial.times = 10 + +####################################################################################### +## Zero Touch ## +####################################################################################### + +#Enable or disable the zero-sp-touch; 0-Disabled (default), 1-Enabled; +zero_touch.enable = 0 + +#Configure the waiting time (in seconds) before canceling the zero-sp-touch. It ranges from 0 to 100, the default value is 5. +zero_touch.wait_time = 5 + +####################################################################################### +## Push XML ## +####################################################################################### +push_xml.server = + +#Enable or disable the phone to display the push XML interface when receiving an incoming call; 0-Disabled (default), 1-Enabled; +push_xml.block_in_calling = 0 + +#Enable or disable the phone to use the push XML via SIP Notify message; 0-Disabled (default), 1-Enabled; +push_xml.sip_notify = 0 + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma, e.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the dialnow rule for the phone. X ranges from 1 to 10; +#dialplan.dialnow.rule.x = +#dialplan.dialnow.line_id.x = + +dialplan.dialnow.rule.1 = +dialplan.dialnow.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 10; +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## BSFT Phonebook ## +####################################################################################### + +#Configuration of BW phonebook. X ranges from 1 to 6. +#bw_phonebook.display_name = +#bw_phonebook.data.x.server = +#bw_phonebook.data.x.port = +#bw_phonebook.data.x.username = +#bw_phonebook.data.x.password = +#bw_phonebook.data.x.name = + +bw_phonebook.display_name = +bw_phonebook.data.1.server = +bw_phonebook.data.1.port = +bw_phonebook.data.1.username = +bw_phonebook.data.1.password = +bw_phonebook.data.1.name = + +bw_phonebook.data.2.server = +bw_phonebook.data.2.port = +bw_phonebook.data.2.username = +bw_phonebook.data.2.password = +bw_phonebook.data.2.name = + +#X ranges from 1 to 6; +#Configure the search parameter of broadsoft phonebook version 1.0; +#bw_phonebook.search_list_v1.x = + +#Configure the search parameter of broadsoft phonebook version 2.0; +#bw_phonebook.search_list_v2.x = + +#Configure the mode of search parameters; 0-AND, 1-OR (default); +#bw_phonebook.search_mode_or.x = + +bw_phonebook.search_list_v1.1 = +bw_phonebook.search_list_v2.2 = +bw_phonebook.search_mode_or.3 = +####################################################################################### +## BSFT Call Log ## +####################################################################################### + +#Configuration of the BW call log. X ranges from 1 to 6. +#This feature is only applicable to some designated firmware version; +#bw_call_log.display_name = +#bw_call_log.data.x.server = +#bw_call_log.data.x.port = +#bw_call_log.data.x.username = +#bw_call_log.data.x.password = +#bw_call_log.data.x.name = + +bw_call_log.display_name = +bw_call_log.data.1.server = +bw_call_log.data.1.port = +bw_call_log.data.1.username = +bw_call_log.data.1.password = +bw_call_log.data.1.name = + +bw_call_log.data.2.server = +bw_call_log.data.2.port = +bw_call_log.data.2.username = +bw_call_log.data.2.password = +bw_call_log.data.2.name = + + + +####################################################################################### +## Remote Phonebook ## +####################################################################################### + +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +remote_phonebook.display_name = + +#remote_phonebook.data.x.url = +#remote_phonebook.data.X.name = +remote_phonebook.data.1.url = +remote_phonebook.data.1.name = + +remote_phonebook.data.2.url = +remote_phonebook.data.2.name = + +remote_phonebook.data.3.url = +remote_phonebook.data.3.name = + +remote_phonebook.data.4.url = +remote_phonebook.data.4.name = + +remote_phonebook.data.5.url = +remote_phonebook.data.5.name = + +#Configure the interval(in minutes) for the phone to update phonebook,(1440 by default); +directory.update_time_interval = + +#Enable or disable the phone to match the incoming call with the contact in the remote phonebook; 0-Disabled, 1-Enabled(default); +directory.incoming_call_match_enable = + +#Enable or disable the broadsoft directory; 0-Disabled (default), 1-Enabled; +bw.directory_enable = + +####################################################################################### +## LDAP Settings ## +####################################################################################### + +#Enable or disable the LDAP feature; 0-Disabled(default), 1-Enabled; +ldap.enable = +#Custom the display name of the LDAP. +ldap.customize_label = + +#Configure the search criteria for name and number lookups. +ldap.name_filter = +ldap.number_filter = + +ldap.host = +ldap.port = 389 + +ldap.base = +ldap.user = +ldap.password = + +#Specify the maximum of the displayed search results. It ranges from 1 to 32000, the default value is 50. +ldap.max_hits = 50 + +ldap.name_attr = +ldap.numb_attr = +ldap.display_name = + +#Configure the LDAP version. The valid value is 2 or 3 (default). +ldap.version = 3 + +#Enable or disable the phone to query the contact name from the LDAP server when receiving an incoming call; 0-Disabled (default), 1-Enabled; +ldap.call_in_lookup = 0 + +#Enable or disable the phone to sort the search results in alphabetical order; 0-Disabled (default), 1-Enabled; +ldap.ldap_sort = 0 + +####################################################################################### +## Phone Settings ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = 486 + +features.call_completion_enable = 0 +features.dnd.on_code = +features.dnd.off_code = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = 1 + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the intercom feature; 0-Disabled, 1-Enabled (default); +features.intercom.allow = + +#Enable or disable the phone to mute the Speaker when answering an intercom call; 0-Disabled (default), 1-Enabled; +features.intercom.mute = + +#Enable or disable the phone to play the intercom warning tone; 0-Disabled, 1-Enabled (default); +features.intercom.tone = + +#Enable or disable the phone to barge in an intercom call; 0-Disabled, 1-Enabled (default); +features.intercom.barge = + +#Configure the hotline number and delay time (in seconds). It ranges from 0 to 180, the default value of delay time is 4. +features.hotline_number = +features.hotline_delay = + +#Configure the delay time (in seconds) of playing busy tone when rejecting a call. The valid values are 0 (default), 3 and 5. +features.busy_tone_delay = + +#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key; +features.pound_key.mode = + +#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default); +features.send_key_tone = +features.key_tone = + +features.redial_tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the phone to receive the action URI request from the specified IP address(es) or any IP address; +#Enter multiple IP addresses (separated by comma) or "any"(stands for any IP address); +features.action_uri_limit_ip = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = 5 + +#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); +#Require reboot; +features.direct_ip_call_enable = 1 + +#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset; +features.ringer_device.is_use_headset = 0 + +#Enable or disable the phone to display the local camera when in the fullscreen state, 0-Disabled, 1-Enabled(default); +features.fullscreen_local_visible = 1 + +#Configure the time (in seconds) the phone automatically dial out the dialed digits. It ranges from 1 to 14, the default value is 4. +phone_setting.inter_digit_time = 4 + +#Configure the ring tone for the phone. System ring tones are: common (default), Ring1.wav, Ring2.wavˇ­ˇ­Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: phone_setting.ring_type = Custom:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: phone_setting.ring_type = Resource:Ring2.wav +phone_setting.ring_type = + +#Configure the active backlight level, Integer,1-10 (6 by default); +phone_setting.active_backlight_level = + +#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1. +phone_setting.inactive_backlight_level = 1 + +#Configure the backlight time (in seconds). The valid values are 1-Always on, 60 (default), 120, 300, 600, 1800. +phone_setting.backlight_time = + +#Configure the phone background. +#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png +#If you set the system image (1.jpg) as phone backgroup, the value is: phone_setting.backgrounds = Resource:1.jpg +phone_setting.backgrounds = + +#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled; +phone_setting.predial_autodial = 0 + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = 1 + +#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 4. +phone_setting.dialnow_delay = 4 + +#Enable or disable the phone to display the shortcut menu on the idle screen; 0-Disabled (default), 1-Enabled; +phone_setting.shortcuts_enable = 0 + +#Enable or disable the phone to display the recent call in the pre-dial interface; 0-Disabled, 1-Enabled (default); +super_search.recent_call = 1 + +#Enable or disable the phone to display the soft dialpad in the pre-dial interface; 0-Disabled, 1-Enabled (default); +super_search.dial_pad = 1 + +#Enable or disable the phone to hide the value N/A of the DSS key; 0-Disabled (default), 1-Enabled; +#Require reboot; +phone_setting.dsskey_hide_enable = + +#Enable or disable the phone to configure the soft key on the idle screen; 0-Disabled (default), 1-Enabled; +#Require reboot; +phone_setting.softkey_enable = + +#Enable or disable the phone to strip out the URL from the alert-info header; 0-Disabled, 1-Enabled (default); +phone_setting.parse_ring_url_enable = + +#Enable or disable the Tel mode; 0-SIP (default), 1-Tel; +phone_setting.tel_mode = + +#Enable or disable the action URL feature; 0-Disabled, 1-Enabled (default); +phone_setting.action_uri_enable = + +#Enable or disable the phone to display the Account menu icon; 0-Disabled, 1-Enabled (default); +#Require reboot; +phone_setting.account_show_enable = + +####################################################################################### +## Configure a server URL for firmware update ## +####################################################################################### +firmware.url = + +####################################################################################### +## Configure a server URL for customizing a ringtones ## +####################################################################################### +ringtone.url = + +#ringtone.delete = http://localhost/all,delete all the customized ring tones; +ringtone.delete = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates; +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate; +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Dialnow Rule/Replace Rule ## +####################################################################################### +local_contact.data.url = +auto_dst.url = +dialplan_dialnow.url = +dialplan_replace_rule.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations; +custom_factory_configuration.url = + +####################################################################################### +## Camera/Doorphone data/Contact image/Wallpaper ## +####################################################################################### +#Configure the access URL for downloading the camera data; +doorphone_data.url = + +#Configure access URL for downloading customized image of local contact; +local_contact_image.url = + +#Configure the server address for uploading a .tar file which contains mutiple contact images; +local_contact_image.tar.url = + +#Configure the access URL for downloading the customized wallpaper; +wallpaper_upload.url = + +####################################################################################### +## Call List ## +####################################################################################### +#Configure the access URL for downloading the call list; +#Require reboot; +call_list.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar; +openvpn.url = + +#Require reboot; +super_search.url = + +#Uploading the settings of the shortcut keys; +#Require reboot; +dialing_shortcut.url= diff --git a/resources/templates/provision/yealink/vp530/{$mac}.cfg b/resources/templates/provision/yealink/vp530/{$mac}.cfg new file mode 100644 index 0000000000..df9a2ef608 --- /dev/null +++ b/resources/templates/provision/yealink/vp530/{$mac}.cfg @@ -0,0 +1,1386 @@ +#!version:1.0.0.1 REV70 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.1.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$user_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = {$sip_port_1} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.1.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = + +#Specify the IP address or domain name of the backup SIP server. +#Require reboot; +account.1.backup_sip_server_host = + +#Specify the backup SIP server port, the default value is 5060. +#Require reboot; +account.1.backup_sip_server_port = + +account.1.sip_server_host_readonly = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + +#Configure the voice mail number of account 1. +voice_mail.number.1 = *97 + +#Configure the proxy server to account 1. +account.1.proxy_require = + +#Configure the call mode; 0-Voice, 1-Video (default); +account.1.call_option.call_mode = + +#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); +account.1.call_option.local_video_enable = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = {$register_expires_1} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.1.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.1.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Assign account 1 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.1.shared_line = + +#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.1.dialoginfo_callpickup = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.1.blf.subscribe_period = + +#Configure the pickup code of BLF List. +account.1.blf_list_code = + +#Configure the bargein code. +account.1.blf_list_barge_in_code = + +#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; +account.1.sip_server_type = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the music on hold server; +account.1.music_server_uri = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.1.compact_header_enable = + +#Enable or disable the ACD feature on account 1; 0-Disabled (default), 1-Enable; +account.1.acd.enable = + +#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; +account.1.acd.available = + +#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); +account.1.acd.initial_state = + +#Configure the user ID and password to login the ACD system. +account.1.acd.user_id = +account.1.acd.password = + +#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); +account.1.acd.auto_login_enable = + +#Configure the unavailable reason and unavailable reason code. +account.1.acd.unavailable_reason = +account.1.acd.reason_code.code = + +#Enable or disable the hoteling feature on account 1; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.hoteling.enable = + +#Configure the hoteling user ID and password. +#Require reboot; +account.1.hoteling.user_id = +account.1.hoteling.password = + +#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.1.hoteling.auto_login_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = + +#Configure the STUN server address. +account.1.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.1.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +#Configure the audio and video attributes. +account.1.advanced.audio_bandwidth = 0 +account.1.advanced.video_frame_rate = 25 +account.1.advanced.video_i_frame_refresh_time = 30 +account.1.advanced.video_bandwidth = 0 +account.1.advanced.total_bandwidth = 0 + +#Assign a ringtone for account 1. The system ring tones are: common (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav +account.1.ringtone.ring_type = + +#Audio codecs for account 1 (Y ranges from 1 to 7). +#account.1.codec.y.enable = +#account.1.codec.y.payload_type = +#account.1.codec.y.priority = +#account.1.codec.y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 2 +account.1.codec.1.rtpmap = 8 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 1 +account.1.codec.2.rtpmap = 0 + +account.1.codec.3.enable = 1 +account.1.codec.3.payload_type = G729 +account.1.codec.3.priority =3 +account.1.codec.3.rtpmap = 18 + +account.1.codec.4.enable = 1 +account.1.codec.4.payload_type = G722 +account.1.codec.4.priority = 4 +account.1.codec.4.rtpmap = 9 + +account.1.codec.5.enable = 0 +account.1.codec.5.payload_type = G723 +account.1.codec.5.priority = 5 +account.1.codec.5.rtpmap = 4 + +account.1.codec.6.enable = 0 +account.1.codec.6.payload_type = AACLC +account.1.codec.6.priority = 6 +account.1.codec.6.rtpmap = 102 + +account.1.codec.7.enable = 0 +account.1.codec.7.payload_type = iLBC +account.1.codec.7.priority = 7 +account.1.codec.7.rtpmap = 122 + +#Video codecs for account 1 (X ranges from 1 to 3) +#account.1.video_codec.xxxxx.enable = +#account.1.video_codec.x.priority = +#account.1.video_codec.x.payload_type = +#account.1.video_codec.x.rtpmap = +#account.1.video_codec.x.para = + +account.1.video_codec.1.enable = 1 +account.1.video_codec.1.priority = 1 +account.1.video_codec.1.payload_type = H264 +account.1.video_codec.1.rtpmap = 99 +account.1.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 + +account.1.video_codec.2.enable = 1 +account.1.video_codec.2.priority = 2 +account.1.video_codec.2.payload_type = H263 +account.1.video_codec.2.rtpmap = 34 +account.1.video_codec.2.para = CIF=1; QCIF=1 + +account.1.video_codec.3.enable = 1 +account.1.video_codec.3.priority = 3 +account.1.video_codec.3.payload_type = mp4v-es +account.1.video_codec.3.rtpmap = 102 +account.1.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 2; 0-Disabled (default), 1-Enabled; +account.2.enable = 1 + +#Configure the label displayed on the LCD screen for account 2. +account.2.label = {$display_name_2} + +#Configure the display name of account 2. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$user_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = {$sip_port_2} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.2.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = + +#Specify the server port, the default value is 5060. +account.2.outbound_port = + +#Specify the IP address or domain name of the backup SIP server. +#Require reboot; +account.2.backup_sip_server_host = + +#Specify the backup SIP server port, the default value is 5060. +#Require reboot; +account.2.backup_sip_server_port = + +account.2.sip_server_host_readonly = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + +#Configure the voice mail number of account 2. +voice_mail.number.2 = *97 + +#Configure the proxy server to account 2. +account.2.proxy_require = + +#Configure the call mode; 0-Voice, 1-Video (default); +account.2.call_option.call_mode = + +#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); +account.2.call_option.local_video_enable = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 2, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = {$register_expires_2} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.2.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.2.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.2.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Assign account 2 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.2.shared_line = + +#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.2.dialoginfo_callpickup = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.2.blf.subscribe_period = + +#Configure the pickup code of BLF List. +account.2.blf_list_code = + +#Configure the bargein code. +account.2.blf_list_barge_in_code = + +#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; +account.2.sip_server_type = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the music on hold server; +account.2.music_server_uri = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.2.compact_header_enable = + +#Enable or disable the ACD feature on account 2; 0-Disabled (default), 1-Enable; +account.2.acd.enable = + +#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; +account.2.acd.available = + +#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); +account.2.acd.initial_state = + +#Configure the user ID and password to login the ACD system. +account.2.acd.user_id = +account.2.acd.password = + +#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); +account.2.acd.auto_login_enable = + +#Configure the unavailable reason and unavailable reason code. +account.2.acd.unavailable_reason = +account.2.acd.reason_code.code = + +#Enable or disable the hoteling feature on account 2; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.hoteling.enable = + +#Configure the hoteling user ID and password. +#Require reboot; +account.2.hoteling.user_id = +account.2.hoteling.password = + +#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.2.hoteling.auto_login_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = + +#Configure the STUN server address. +account.2.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +#Configure the audio and video attributes. +account.2.advanced.audio_bandwidth = 0 +account.2.advanced.video_frame_rate = 25 +account.2.advanced.video_i_frame_refresh_time = 30 +account.2.advanced.video_bandwidth = 0 +account.2.advanced.total_bandwidth = 0 + +#Assign a ringtone for account 2. The system ring tones are: common (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav +account.2.ringtone.ring_type = + +#Audio codecs for account 2 (Y ranges from 1 to 7). +#account.2.codec.y.enable = +#account.2.codec.y.payload_type = +#account.2.codec.y.priority = +#account.2.codec.y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 2 +account.2.codec.1.rtpmap = 8 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 1 +account.2.codec.2.rtpmap = 0 + +account.2.codec.3.enable = 1 +account.2.codec.3.payload_type = G729 +account.2.codec.3.priority =3 +account.2.codec.3.rtpmap = 18 + +account.2.codec.4.enable = 1 +account.2.codec.4.payload_type = G722 +account.2.codec.4.priority = 4 +account.2.codec.4.rtpmap = 9 + +account.2.codec.5.enable = 0 +account.2.codec.5.payload_type = G723 +account.2.codec.5.priority = 5 +account.2.codec.5.rtpmap = 4 + +account.2.codec.6.enable = 0 +account.2.codec.6.payload_type = AACLC +account.2.codec.6.priority = 6 +account.2.codec.6.rtpmap = 102 + +account.2.codec.7.enable = 0 +account.2.codec.7.payload_type = iLBC +account.2.codec.7.priority = 7 +account.2.codec.7.rtpmap = 122 + +#Video codecs for account 2 (X ranges from 1 to 3) +#account.2.video_codec.xxxxx.enable = +#account.2.video_codec.x.priority = +#account.2.video_codec.x.payload_type = +#account.2.video_codec.x.rtpmap = +#account.2.video_codec.x.para = + +account.2.video_codec.1.enable = 1 +account.2.video_codec.1.priority = 1 +account.2.video_codec.1.payload_type = H264 +account.2.video_codec.1.rtpmap = 99 +account.2.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 + +account.2.video_codec.2.enable = 1 +account.2.video_codec.2.priority = 2 +account.2.video_codec.2.payload_type = H263 +account.2.video_codec.2.rtpmap = 34 +account.2.video_codec.2.para = CIF=1; QCIF=1 + +account.2.video_codec.3.enable = 1 +account.2.video_codec.3.priority = 3 +account.2.video_codec.3.payload_type = mp4v-es +account.2.video_codec.3.rtpmap = 102 +account.2.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 + +####################################################################################### +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 3; 0-Disabled (default), 1-Enabled; +account.3.enable = + +#Configure the label displayed on the LCD screen for account 3. +account.3.label = {$display_name_3} + +#Configure the display name of account 3. +account.3.display_name = {$display_name_3} + +#Configure the username and password for register authentication. +account.3.auth_name = {$user_id_3} +account.3.password = {$user_password_3} + +#Configure the register user name. +account.3.user_name = {$user_id_3} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.3.sip_server_host = {$server_address_3} + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = {$sip_port_3} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.3.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = {$outbound_proxy_3} + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Specify the IP address or domain name of the backup SIP server. +#Require reboot; +account.3.backup_sip_server_host = + +#Specify the backup SIP server port, the default value is 5060. +#Require reboot; +account.3.backup_sip_server_port = + +account.3.sip_server_host_readonly = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + +#Configure the voice mail number of account 3. +voice_mail.number.3 = + +#Configure the proxy server to account 3. +account.3.proxy_require = + +#Configure the call mode; 0-Voice, 1-Video (default); +account.3.call_option.call_mode = + +#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); +account.3.call_option.local_video_enable = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 3, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = {$register_expires_3} + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.3.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.3.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.3.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Assign account 3 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.3.shared_line = + +#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.3.dialoginfo_callpickup = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.3.blf.subscribe_period = + +#Configure the pickup code of BLF List. +account.3.blf_list_code = + +#Configure the bargein code. +account.3.blf_list_barge_in_code = + +#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; +account.3.sip_server_type = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the music on hold server; +account.3.music_server_uri = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.3.compact_header_enable = + +#Enable or disable the ACD feature on account 3; 0-Disabled (default), 1-Enable; +account.3.acd.enable = + +#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; +account.3.acd.available = + +#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); +account.3.acd.initial_state = + +#Configure the user ID and password to login the ACD system. +account.3.acd.user_id = +account.3.acd.password = + +#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); +account.3.acd.auto_login_enable = + +#Configure the unavailable reason and unavailable reason code. +account.3.acd.unavailable_reason = +account.3.acd.reason_code.code = + +#Enable or disable the hoteling feature on account 3; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.hoteling.enable = + +#Configure the hoteling user ID and password. +#Require reboot; +account.3.hoteling.user_id = +account.3.hoteling.password = + +#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.3.hoteling.auto_login_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = + +#Configure the STUN server address. +account.3.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +#Configure the audio and video attributes. +account.3.advanced.audio_bandwidth = 0 +account.3.advanced.video_frame_rate = 25 +account.3.advanced.video_i_frame_refresh_time = 30 +account.3.advanced.video_bandwidth = 0 +account.3.advanced.total_bandwidth = 0 + +#Assign a ringtone for account 3. The system ring tones are: common (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav +account.3.ringtone.ring_type = + +#Audio codecs for account 3 (Y ranges from 1 to 7). +#account.3.codec.y.enable = +#account.3.codec.y.payload_type = +#account.3.codec.y.priority = +#account.3.codec.y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 2 +account.3.codec.1.rtpmap = 8 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 1 +account.3.codec.2.rtpmap = 0 + +account.3.codec.3.enable = 1 +account.3.codec.3.payload_type = G729 +account.3.codec.3.priority =3 +account.3.codec.3.rtpmap = 18 + +account.3.codec.4.enable = 1 +account.3.codec.4.payload_type = G722 +account.3.codec.4.priority = 4 +account.3.codec.4.rtpmap = 9 + +account.3.codec.5.enable = 0 +account.3.codec.5.payload_type = G723 +account.3.codec.5.priority = 5 +account.3.codec.5.rtpmap = 4 + +account.3.codec.6.enable = 0 +account.3.codec.6.payload_type = AACLC +account.3.codec.6.priority = 6 +account.3.codec.6.rtpmap = 102 + +account.3.codec.7.enable = 0 +account.3.codec.7.payload_type = iLBC +account.3.codec.7.priority = 7 +account.3.codec.7.rtpmap = 122 + +#Video codecs for account 3 (X ranges from 1 to 3) +#account.3.video_codec.xxxxx.enable = +#account.3.video_codec.x.priority = +#account.3.video_codec.x.payload_type = +#account.3.video_codec.x.rtpmap = +#account.3.video_codec.x.para = + +account.3.video_codec.1.enable = 1 +account.3.video_codec.1.priority = 1 +account.3.video_codec.1.payload_type = H264 +account.3.video_codec.1.rtpmap = 99 +account.3.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 + +account.3.video_codec.2.enable = 1 +account.3.video_codec.2.priority = 2 +account.3.video_codec.2.payload_type = H263 +account.3.video_codec.2.rtpmap = 34 +account.3.video_codec.2.para = CIF=1; QCIF=1 + +account.3.video_codec.3.enable = 1 +account.3.video_codec.3.priority = 3 +account.3.video_codec.3.payload_type = mp4v-es +account.3.video_codec.3.rtpmap = 102 +account.3.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 + +####################################################################################### +## Account4 Settings ## +####################################################################################### + +#Enable or disable the account 4; 0-Disabled (default), 1-Enabled; +account.4.enable = + +#Configure the label displayed on the LCD screen for account 4. +account.4.label = {$display_name_4} + +#Configure the display name of account 4. +account.4.display_name = {$display_name_4} + +#Configure the username and password for register authentication. +account.4.auth_name = {$user_id_4} +account.4.password = {$user_password_4} + +#Configure the register user name. +account.4.user_name = {$user_id_4} + +#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = 1 + +#Configure the SIP server address. +account.4.sip_server_host = {$server_address_4} + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = {$sip_port_4} + +#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.4.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = {$outbound_proxy_4} + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Specify the IP address or domain name of the backup SIP server. +#Require reboot; +account.4.backup_sip_server_host = + +#Specify the backup SIP server port, the default value is 5060. +#Require reboot; +account.4.backup_sip_server_port = + +account.4.sip_server_host_readonly = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4== 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + +#Configure the voice mail number of account 4. +voice_mail.number.4 = + +#Configure the proxy server to account 4. +account.4.proxy_require = + +#Configure the call mode; 0-Voice, 1-Video (default); +account.4.call_option.call_mode = + +#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); +account.4.call_option.local_video_enable = + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 4, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = {$register_expires_4} + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.4.cid_source = + +#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; +account.4.cp_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Assign account 4 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; +account.4.shared_line = + +#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = + +#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; +account.4.dialoginfo_callpickup = + +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +#Configure the BLF subscribe period (in seconds), the default value is 1800. +account.4.blf.subscribe_period = + +#Configure the pickup code of BLF List. +account.4.blf_list_code = + +#Configure the bargein code. +account.4.blf_list_barge_in_code = + +#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; +account.4.sip_server_type = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the music on hold server; +account.4.music_server_uri = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; +account.4.compact_header_enable = + +#Enable or disable the ACD feature on account 4; 0-Disabled (default), 1-Enable; +account.4.acd.enable = + +#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; +account.4.acd.available = + +#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); +account.4.acd.initial_state = + +#Configure the user ID and password to login the ACD system. +account.4.acd.user_id = +account.4.acd.password = + +#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); +account.4.acd.auto_login_enable = + +#Configure the unavailable reason and unavailable reason code. +account.4.acd.unavailable_reason = +account.4.acd.reason_code.code = + +#Enable or disable the hoteling feature on account 4; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.hoteling.enable = + +#Configure the hoteling user ID and password. +#Require reboot; +account.4.hoteling.user_id = +account.4.hoteling.password = + +#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; +#Require reboot; +account.4.hoteling.auto_login_enable = + +######################################################################### +## NAT Settings ## +######################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = + +#Configure the STUN server address. +account.4.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + +#Configure the audio and video attributes. +account.4.advanced.audio_bandwidth = 0 +account.4.advanced.video_frame_rate = 25 +account.4.advanced.video_i_frame_refresh_time = 30 +account.4.advanced.video_bandwidth = 0 +account.4.advanced.total_bandwidth = 0 + +#Assign a ringtone for account 4. The system ring tones are: common (default), Ring1.wav, Ring2.wav,ˇ­ˇ­Ring8.wav. +#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav +#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav +account.4.ringtone.ring_type = + +#Audio codecs for account 4 (Y ranges from 1 to 7). +#account.4.codec.y.enable = +#account.4.codec.y.payload_type = +#account.4.codec.y.priority = +#account.4.codec.y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 2 +account.4.codec.1.rtpmap = 8 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 1 +account.4.codec.2.rtpmap = 0 + +account.4.codec.3.enable = 1 +account.4.codec.3.payload_type = G729 +account.4.codec.3.priority =3 +account.4.codec.3.rtpmap = 18 + +account.4.codec.4.enable = 1 +account.4.codec.4.payload_type = G722 +account.4.codec.4.priority = 4 +account.4.codec.4.rtpmap = 9 + +account.4.codec.5.enable = 0 +account.4.codec.5.payload_type = G723 +account.4.codec.5.priority = 5 +account.4.codec.5.rtpmap = 4 + +account.4.codec.6.enable = 0 +account.4.codec.6.payload_type = AACLC +account.4.codec.6.priority = 6 +account.4.codec.6.rtpmap = 102 + +account.4.codec.7.enable = 0 +account.4.codec.7.payload_type = iLBC +account.4.codec.7.priority = 7 +account.4.codec.7.rtpmap = 122 + +#Video codecs for account 4 (X ranges from 1 to 3) +#account.4.video_codec.xxxxx.enable = +#account.4.video_codec.x.priority = +#account.4.video_codec.x.payload_type = +#account.4.video_codec.x.rtpmap = +#account.4.video_codec.x.para = + +account.4.video_codec.1.enable = 1 +account.4.video_codec.1.priority = 1 +account.4.video_codec.1.payload_type = H264 +account.4.video_codec.1.rtpmap = 99 +account.4.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 + +account.4.video_codec.2.enable = 1 +account.4.video_codec.2.priority = 2 +account.4.video_codec.2.payload_type = H263 +account.4.video_codec.2.rtpmap = 34 +account.4.video_codec.2.para = CIF=1; QCIF=1 + +account.4.video_codec.3.enable = 1 +account.4.video_codec.3.priority = 3 +account.4.video_codec.3.payload_type = mp4v-es +account.4.video_codec.3.rtpmap = 102 +account.4.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +forward.always.enable = + +#Configure the target number that the phone will forward the call to. +forward.always.target = + +#Configure the on/off code for always forward; +forward.always.on_code = +forward.always.off_code = + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +forward.busy.enable = +forward.busy.target = +forward.busy.on_code = +forward.busy.off_code = + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +forward.no_answer.enable = +forward.no_answer.target = +forward.no_answer.timeout = +forward.no_answer.on_code = +forward.no_answer.off_code = \ No newline at end of file