From 3c8058b1c6ade8cb74ca1a2be6ced26c91d255ae Mon Sep 17 00:00:00 2001 From: blackc2004 Date: Fri, 4 Sep 2015 09:38:48 -0700 Subject: [PATCH] {$mac}.cfg --- .../provision/yealink/cp860/{$mac}.cfg | 2943 +++++++++++++++++ 1 file changed, 2943 insertions(+) create mode 100644 resources/templates/provision/yealink/cp860/{$mac}.cfg diff --git a/resources/templates/provision/yealink/cp860/{$mac}.cfg b/resources/templates/provision/yealink/cp860/{$mac}.cfg new file mode 100644 index 0000000000..412339f6a2 --- /dev/null +++ b/resources/templates/provision/yealink/cp860/{$mac}.cfg @@ -0,0 +1,2943 @@ +#!version:1.0.0.1 REV 71 + +##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## + +####################################################################################### +## Account 1 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_1) } +account.1.enable = 1 +{else} +account.1.enable = 0 +{/if} +account.1.label = {$display_name_1} +account.1.display_name = {$display_name_1} +account.1.auth_name = {$auth_id_1} +account.1.password = {$user_password_1} +account.1.user_name = {$user_id_1} +account.1.sip_server_host = {$server_address_1} +account.1.sip_server_port = {$sip_port_1} +account.1.outbound_proxy_enable = +account.1.outbound_host = {$outbound_proxy_1} +account.1.outbound_port = 5060 +account.1.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} +{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} + + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.1.reregister_enable = 0 +account.1.retry_counts = +account.1.failback_mode = 0 +account.1.failback_timeout = 3600 +account.1.naptr_build = 0 +account.1.fallback.redundancy_type = 0 +account.1.fallback.timeout = 120 +account.1.sip_server.1.address = +account.1.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.sip_server.1.expires = {$register_expires_1} +account.1.sip_server.1.retry_counts = 3 +account.1.sip_server.1.failback_mode = 0 +account.1.sip_server.1.failback_timeout = 3600 +account.1.sip_server.1.register_on_enable = 0 +account.1.sip_server.2.address = +account.1.sip_server.2.port = 5060 +account.1.sip_server.2.expires = 3600 +account.1.sip_server.2.retry_counts = 3 +account.1.sip_server.2.failback_mode = 0 +account.1.sip_server.2.failback_timeout = 3600 +account.1.sip_server.2.register_on_enable = 0 +account.1.dns_cache_type = 1 + +account.1.dns_cache_a.1.name = +account.1.dns_cache_a.1.ip = +account.1.dns_cache_a.1.ttl = 300 + +account.1.dns_cache_srv.1.name = +account.1.dns_cache_srv.1.port = 0 +account.1.dns_cache_srv.1.priority = 0 +account.1.dns_cache_srv.1.target = +account.1.dns_cache_srv.1.weight = 0 +account.1.dns_cache_srv.1.ttl = 300 +account.1.dns_cache_naptr.1.name = +account.1.dns_cache_naptr.1.flags = +account.1.dns_cache_naptr.1.order = 0 +account.1.dns_cache_naptr.1.preference = 0 +account.1.dns_cache_naptr.1.replace = +account.1.dns_cache_naptr.1.service = +account.1.dns_cache_naptr.1.ttl = 300 + +account.1.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.1.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.1.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.1.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.1.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.1.srv_ttl_timer_enable = +account.1.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = 0 + +account.1.nat.stun_server = +account.1.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.1.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = {$yealink_rport_1} + + +####################################################################################### +## AccountX Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +voice_mail.number.1 = {$voicemail_number} + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.1.subscribe_mwi = 1 +account.1.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = 1 + +account.1.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.1.blf.blf_list_uri = + +account.1.blf_list_code = +account.1.blf_list_barge_in_code = +account.1.blf.subscribe_period = 1800 + +account.1.blf.subscribe_event = +account.1.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.1.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.1.bla_number = +account.1.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.1.codec.Y.enable = +#The type of the specified codec. +#account.1.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.1.codec.Y.priority = +#The payload of the specified codec. +#account.1.codec.Y.rtpmap = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =0 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = 0 +account.1.codec.7.payload_type = iLBC +account.1.codec.7.priority = 0 +account.1.codec.7.rtpmap = 106 + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = G726-16 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 103 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = G726-24 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 104 + +account.1.codec.10.enable = 0 +account.1.codec.10.payload_type = G726-32 +account.1.codec.10.priority = 0 +account.1.codec.10.rtpmap = 102 + +account.1.codec.11.enable = 0 +account.1.codec.11.payload_type = G726-40 +account.1.codec.11.priority = 0 +account.1.codec.11.rtpmap = 105 + +account.1.codec.12.enable = 0 +account.1.codec.12.payload_type = GSM +account.1.codec.12.priority = 0 +account.1.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.1.anonymous_call = 0 +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +account.1.reject_anonymous_call = +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.1.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.1.group_pickup_code = +account.1.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.1.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.1.alert_info_url_enable = + +#Assign a ringtone for account1. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.1.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.1.ringtone.ring_type = Resource:Ring2.wav +account.1.ringtone.ring_type = + +account.1.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.1.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.1.conf_uri = + +####################################################################################### +## cid_source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.1.cid_source = + +account.1.cid_source_privacy = 1 +account.1.cid_source_ppi = 1 +account.1.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.1.music_on_hold_type = + +account.1.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.1.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.1.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.1.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.1.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.1.dnd.enable = +account.1.dnd.on_code = +account.1.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### + +account.1.always_fwd.enable = +account.1.always_fwd.target = +account.1.always_fwd.off_code = +account.1.always_fwd.on_code = + +account.1.busy_fwd.enable = +account.1.busy_fwd.target = +account.1.busy_fwd.off_code = +account.1.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.1.timeout_fwd.enable = +account.1.timeout_fwd.target = +account.1.timeout_fwd.timeout = +account.1.timeout_fwd.off_code = +account.1.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.1.hoteling.enable = 0 +account.1.hoteling.user_id = 0 +account.1.hoteling.password = 0 +account.1.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.1.acd.enable = 0 +account.1.acd.unavailable_reason_enable = 0 +account.1.acd.available = 0 +account.1.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.1.bw_acd_reason_code.Y = 500(lunch time) +account.1.bw_acd_reason_code.1 = + +account.1.reason_code.1 = +account.1.reason_code_name.1 = 0 +account.1.bw_disp_code.1 = +account.1.bw_disp_code_name.1 = +account.1.supervisor_info_code.1 = +account.1.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.1.call_center.call_info_enable = 0 +account.1.call_center.show_call_info_time = 30 +account.1.call_center.disp_code_enable = 0 +account.1.call_center.trace_enable = 0 +account.1.call_center.emergency_enable = 0 +account.1.call_center.queue_status_enable = 0 +account.1.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.1.xsi.user = +account.1.xsi.password = +account.1.xsi.host = +account.1.xsi.server_type = +account.1.xsi.port = + + +####################################################################################### +## Account 2 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_2) } +account.2.enable = 1 +{else} +account.2.enable = 0 +{/if} +account.2.label = {$display_name_2} +account.2.display_name = {$display_name_2} +account.2.auth_name = {$auth_id_2} +account.2.password = {$user_password_2} +account.2.user_name = {$user_id_2} +account.2.sip_server_host = {$server_address_2} +account.2.sip_server_port = {$sip_port_2} +account.2.outbound_proxy_enable = +account.2.outbound_host = {$outbound_proxy_2} +account.2.outbound_port = 5060 +account.2.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} +{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} +{if $sip_transport_2 == 'tls'}account.2.transport = 2{/if} +{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} + + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.2.reregister_enable = 0 +account.2.retry_counts = +account.2.failback_mode = 0 +account.2.failback_timeout = 3600 +account.2.naptr_build = 0 +account.2.fallback.redundancy_type = 0 +account.2.fallback.timeout = 120 +account.2.sip_server.1.address = +account.2.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.sip_server.1.expires = {$register_expires_2} +account.2.sip_server.1.retry_counts = 3 +account.2.sip_server.1.failback_mode = 0 +account.2.sip_server.1.failback_timeout = 3600 +account.2.sip_server.1.register_on_enable = 0 +account.2.sip_server.2.address = +account.2.sip_server.2.port = 5060 +account.2.sip_server.2.expires = 3600 +account.2.sip_server.2.retry_counts = 3 +account.2.sip_server.2.failback_mode = 0 +account.2.sip_server.2.failback_timeout = 3600 +account.2.sip_server.2.register_on_enable = 0 +account.2.dns_cache_type = 1 + +account.2.dns_cache_a.1.name = +account.2.dns_cache_a.1.ip = +account.2.dns_cache_a.1.ttl = 300 + +account.2.dns_cache_srv.0.name = +account.2.dns_cache_srv.0.port = 0 +account.2.dns_cache_srv.0.priority = 0 +account.2.dns_cache_srv.0.target = +account.2.dns_cache_srv.0.weight = 0 +account.2.dns_cache_srv.0.ttl = 300 +account.2.dns_cache_naptr.0.name = +account.2.dns_cache_naptr.0.flags = +account.2.dns_cache_naptr.0.order = 0 +account.2.dns_cache_naptr.0.preference = 0 +account.2.dns_cache_naptr.0.replace = +account.2.dns_cache_naptr.0.service = +account.2.dns_cache_naptr.0.ttl = 300 + +account.2.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.2.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.2.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.2.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.2.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.2.srv_ttl_timer_enable = +account.2.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = 0 + +account.2.nat.stun_server = +account.2.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.2.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = {$yealink_rport_2} + + +####################################################################################### +## Account2 Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.2.advanced.timer_t1 = 0.5 +account.2.advanced.timer_t2 = 4 +account.2.advanced.timer_t4 = 5 + +voice_mail.number.2 = *97 + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.2.subscribe_mwi = 1 +account.2.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = 1 + +account.2.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.2.blf.blf_list_uri = + +account.2.blf_list_code = +account.2.blf_list_barge_in_code = +account.2.blf.subscribe_period = 1800 + +account.2.blf.subscribe_event = +account.2.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.2.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.2.bla_number = +account.2.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.2.codec.Y.enable = +#The type of the specified codec. +#account.2.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.2.codec.Y.priority = +#The payload of the specified codec. +#account.2.codec.Y.rtpmap = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =0 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = 0 +account.2.codec.7.payload_type = iLBC +account.2.codec.7.priority = 0 +account.2.codec.7.rtpmap = 106 + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = G726-16 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 103 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = G726-24 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 104 + +account.2.codec.10.enable = 0 +account.2.codec.10.payload_type = G726-32 +account.2.codec.10.priority = 0 +account.2.codec.10.rtpmap = 102 + +account.2.codec.11.enable = 0 +account.2.codec.11.payload_type = G726-40 +account.2.codec.11.priority = 0 +account.2.codec.11.rtpmap = 105 + +account.2.codec.12.enable = 0 +account.2.codec.12.payload_type = GSM +account.2.codec.12.priority = 0 +account.2.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.2.anonymous_call = 0 +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +account.2.reject_anonymous_call = +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.2.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.2.group_pickup_code = +account.2.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.2.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.2.alert_info_url_enable = + +#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav +account.2.ringtone.ring_type = + +account.2.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.2.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.2.conf_uri = + +####################################################################################### +## cid source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.2.cid_source = + +account.2.cid_source_privacy = 1 +account.2.cid_source_ppi = 1 +account.2.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.2.music_on_hold_type = + +account.2.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.2.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.2.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.2.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.2.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.2.dnd.enable = +account.2.dnd.on_code = +account.2.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; +account.2.always_fwd.enable = +account.2.always_fwd.target = +account.2.always_fwd.off_code = +account.2.always_fwd.on_code = + +account.2.busy_fwd.enable = +account.2.busy_fwd.target = +account.2.busy_fwd.off_code = +account.2.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.2.timeout_fwd.enable = +account.2.timeout_fwd.target = +account.2.timeout_fwd.timeout = +account.2.timeout_fwd.off_code = +account.2.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.2.hoteling.enable = 0 +account.2.hoteling.user_id = 0 +account.2.hoteling.password = 0 +account.2.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.2.acd.enable = 0 +account.2.acd.unavailable_reason_enable = 0 +account.2.acd.available = 0 +account.2.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.2.bw_acd_reason_code.Y = 500(lunch time) +account.2.bw_acd_reason_code.1 = + +account.2.reason_code.1 = +account.2.reason_code_name.1 = 0 +account.2.bw_disp_code.1 = +account.2.bw_disp_code_name.1 = +account.2.supervisor_info_code.1 = +account.2.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.2.call_center.call_info_enable = 0 +account.2.call_center.show_call_info_time = 30 +account.2.call_center.disp_code_enable = 0 +account.2.call_center.trace_enable = 0 +account.2.call_center.emergency_enable = 0 +account.2.call_center.queue_status_enable = 0 +account.2.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.2.xsi.user = +account.2.xsi.password = +account.2.xsi.host = +account.2.xsi.server_type = +account.2.xsi.port = + + +####################################################################################### +## Time ## +####################################################################################### +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + + +####################################################################################### +## NETWORK ## +####################################################################################### +##0-ipv4, 1-ipv6, 2-ipv4&ipv6 +network.ip_address_mode = 2 + +network.ipv6_prefix = 64 +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = +network.ipv6_icmp_v6.enable = + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server; +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = +network.static_dns_enable = 0 + +####################################################################################### +## Account 3 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_3) } +account.3.enable = 1 +{else} +account.3.enable = 0 +{/if} +account.3.label = {$display_name_3} +account.3.display_name = {$display_name_3} +account.3.auth_name = {$auth_id_3} +account.3.password = {$user_password_3} +account.3.user_name = {$user_id_3} +account.3.sip_server_host = {$server_address_3} +account.3.sip_server_port = {$sip_port_3} +account.3.outbound_proxy_enable = +account.3.outbound_host = {$outbound_proxy_3} +account.3.outbound_port = 5060 +account.3.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} +{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} +{if $sip_transport_3 == 'tls'}account.3.transport = 2{/if} +{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.3.reregister_enable = 0 +account.3.retry_counts = +account.3.failback_mode = 0 +account.3.failback_timeout = 3600 +account.3.naptr_build = 0 +account.3.fallback.redundancy_type = 0 +account.3.fallback.timeout = 120 +account.3.sip_server.1.address = +account.3.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.sip_server.1.expires = {$register_expires_3} +account.3.sip_server.1.retry_counts = 3 +account.3.sip_server.1.failback_mode = 0 +account.3.sip_server.1.failback_timeout = 3600 +account.3.sip_server.1.register_on_enable = 0 +account.3.sip_server.2.address = +account.3.sip_server.2.port = 5060 +account.3.sip_server.2.expires = 3600 +account.3.sip_server.2.retry_counts = 3 +account.3.sip_server.2.failback_mode = 0 +account.3.sip_server.2.failback_timeout = 3600 +account.3.sip_server.2.register_on_enable = 0 +account.3.dns_cache_type = 1 + +account.3.dns_cache_a.1.name = +account.3.dns_cache_a.1.ip = +account.3.dns_cache_a.1.ttl = 300 + +account.3.dns_cache_srv.0.name = +account.3.dns_cache_srv.0.port = 0 +account.3.dns_cache_srv.0.priority = 0 +account.3.dns_cache_srv.0.target = +account.3.dns_cache_srv.0.weight = 0 +account.3.dns_cache_srv.0.ttl = 300 +account.3.dns_cache_naptr.0.name = +account.3.dns_cache_naptr.0.flags = +account.3.dns_cache_naptr.0.order = 0 +account.3.dns_cache_naptr.0.preference = 0 +account.3.dns_cache_naptr.0.replace = +account.3.dns_cache_naptr.0.service = +account.3.dns_cache_naptr.0.ttl = 300 + +account.3.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.3.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.3.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.3.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.3.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.3.srv_ttl_timer_enable = +account.3.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = 0 + +account.3.nat.stun_server = +account.3.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.3.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = {$yealink_rport_3} + + +####################################################################################### +## Account3 Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.3.advanced.timer_t1 = 0.5 +account.3.advanced.timer_t2 = 4 +account.3.advanced.timer_t4 = 5 + +voice_mail.number.3 = *97 + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.3.subscribe_mwi = 1 +account.3.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = 1 + +account.3.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.3.blf.blf_list_uri = + +account.3.blf_list_code = +account.3.blf_list_barge_in_code = +account.3.blf.subscribe_period = 1800 + +account.3.blf.subscribe_event = +account.3.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.3.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.3.bla_number = +account.3.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.3.codec.Y.enable = +#The type of the specified codec. +#account.3.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.3.codec.Y.priority = +#The payload of the specified codec. +#account.3.codec.Y.rtpmap = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =0 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = 0 +account.3.codec.7.payload_type = iLBC +account.3.codec.7.priority = 0 +account.3.codec.7.rtpmap = 106 + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = G726-16 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 103 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = G726-24 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 104 + +account.3.codec.10.enable = 0 +account.3.codec.10.payload_type = G726-32 +account.3.codec.10.priority = 0 +account.3.codec.10.rtpmap = 102 + +account.3.codec.11.enable = 0 +account.3.codec.11.payload_type = G726-40 +account.3.codec.11.priority = 0 +account.3.codec.11.rtpmap = 105 + +account.3.codec.12.enable = 0 +account.3.codec.12.payload_type = GSM +account.3.codec.12.priority = 0 +account.3.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.3.anonymous_call = 0 +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +account.3.reject_anonymous_call = +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.3.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.3.group_pickup_code = +account.3.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.3.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.3.alert_info_url_enable = + +#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav +account.3.ringtone.ring_type = + +account.3.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.3.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.3.conf_uri = + +####################################################################################### +## cid source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.3.cid_source = + +account.3.cid_source_privacy = 1 +account.3.cid_source_ppi = 1 +account.3.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.3.music_on_hold_type = + +account.3.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.3.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.3.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.3.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.3.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.3.dnd.enable = +account.3.dnd.on_code = +account.3.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; +account.3.always_fwd.enable = +account.3.always_fwd.target = +account.3.always_fwd.off_code = +account.3.always_fwd.on_code = + +account.3.busy_fwd.enable = +account.3.busy_fwd.target = +account.3.busy_fwd.off_code = +account.3.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.3.timeout_fwd.enable = +account.3.timeout_fwd.target = +account.3.timeout_fwd.timeout = +account.3.timeout_fwd.off_code = +account.3.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.3.hoteling.enable = 0 +account.3.hoteling.user_id = 0 +account.3.hoteling.password = 0 +account.3.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.3.acd.enable = 0 +account.3.acd.unavailable_reason_enable = 0 +account.3.acd.available = 0 +account.3.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.3.bw_acd_reason_code.Y = 500(lunch time) +account.3.bw_acd_reason_code.1 = + +account.3.reason_code.1 = +account.3.reason_code_name.1 = 0 +account.3.bw_disp_code.1 = +account.3.bw_disp_code_name.1 = +account.3.supervisor_info_code.1 = +account.3.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.3.call_center.call_info_enable = 0 +account.3.call_center.show_call_info_time = 30 +account.3.call_center.disp_code_enable = 0 +account.3.call_center.trace_enable = 0 +account.3.call_center.emergency_enable = 0 +account.3.call_center.queue_status_enable = 0 +account.3.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.3.xsi.user = +account.3.xsi.password = +account.3.xsi.host = +account.3.xsi.server_type = +account.3.xsi.port = + + +####################################################################################### +## Time ## +####################################################################################### +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + + +####################################################################################### +## NETWORK ## +####################################################################################### +##0-ipv4, 1-ipv6, 2-ipv4&ipv6 +network.ip_address_mode = 2 + +network.ipv6_prefix = 64 +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = +network.ipv6_icmp_v6.enable = + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server; +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + + +####################################################################################### +## Account 4 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_4) } +account.4.enable = 1 +{else} +account.4.enable = 0 +{/if} +account.4.label = {$display_name_4} +account.4.display_name = {$display_name_4} +account.4.auth_name = {$auth_id_4} +account.4.password = {$user_password_4} +account.4.user_name = {$user_id_4} +account.4.sip_server_host = {$server_address_4} +account.4.sip_server_port = {$sip_port_4} +account.4.outbound_proxy_enable = +account.4.outbound_host = {$outbound_proxy_4} +account.4.outbound_port = 5060 +account.4.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_4 == 'udp'}account.4.transport = 0{/if} +{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} +{if $sip_transport_4 == 'tls'}account.4.transport = 2{/if} +{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.4.reregister_enable = 0 +account.4.retry_counts = +account.4.failback_mode = 0 +account.4.failback_timeout = 3600 +account.4.naptr_build = 0 +account.4.fallback.redundancy_type = 0 +account.4.fallback.timeout = 120 +account.4.sip_server.1.address = +account.4.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.sip_server.1.expires = {$register_expires_4} +account.4.sip_server.1.retry_counts = 3 +account.4.sip_server.1.failback_mode = 0 +account.4.sip_server.1.failback_timeout = 3600 +account.4.sip_server.1.register_on_enable = 0 +account.4.sip_server.2.address = +account.4.sip_server.2.port = 5060 +account.4.sip_server.2.expires = 3600 +account.4.sip_server.2.retry_counts = 3 +account.4.sip_server.2.failback_mode = 0 +account.4.sip_server.2.failback_timeout = 3600 +account.4.sip_server.2.register_on_enable = 0 +account.4.dns_cache_type = 1 + +account.4.dns_cache_a.1.name = +account.4.dns_cache_a.1.ip = +account.4.dns_cache_a.1.ttl = 300 + +account.4.dns_cache_srv.1.name = +account.4.dns_cache_srv.1.port = 0 +account.4.dns_cache_srv.1.priority = 0 +account.4.dns_cache_srv.1.target = +account.4.dns_cache_srv.1.weight = 0 +account.4.dns_cache_srv.1.ttl = 300 +account.4.dns_cache_naptr.1.name = +account.4.dns_cache_naptr.1.flags = +account.4.dns_cache_naptr.1.order = 0 +account.4.dns_cache_naptr.1.preference = 0 +account.4.dns_cache_naptr.1.replace = +account.4.dns_cache_naptr.1.service = +account.4.dns_cache_naptr.1.ttl = 300 + +account.4.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.4.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.4.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.4.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.4.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.4.srv_ttl_timer_enable = +account.4.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = 0 + +account.4.nat.stun_server = +account.4.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.4.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = {$yealink_rport_4} + + +####################################################################################### +## Account4 Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.4.advanced.timer_t1 = 0.5 +account.4.advanced.timer_t2 = 4 +account.4.advanced.timer_t4 = 5 + +voice_mail.number.4 = *97 + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.4.subscribe_mwi = 1 +account.4.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = 1 + +account.4.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.4.blf.blf_list_uri = + +account.4.blf_list_code = +account.4.blf_list_barge_in_code = +account.4.blf.subscribe_period = 1800 + +account.4.blf.subscribe_event = +account.4.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.4.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.4.bla_number = +account.4.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.4.codec.Y.enable = +#The type of the specified codec. +#account.4.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.4.codec.Y.priority = +#The payload of the specified codec. +#account.4.codec.Y.rtpmap = + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =0 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = 0 +account.4.codec.7.payload_type = iLBC +account.4.codec.7.priority = 0 +account.4.codec.7.rtpmap = 106 + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = G726-16 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 103 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = G726-24 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 104 + +account.4.codec.10.enable = 0 +account.4.codec.10.payload_type = G726-32 +account.4.codec.10.priority = 0 +account.4.codec.10.rtpmap = 102 + +account.4.codec.11.enable = 0 +account.4.codec.11.payload_type = G726-40 +account.4.codec.11.priority = 0 +account.4.codec.11.rtpmap = 105 + +account.4.codec.12.enable = 0 +account.4.codec.12.payload_type = GSM +account.4.codec.12.priority = 0 +account.4.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.4.anonymous_call = 0 +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +account.4.reject_anonymous_call = +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.4.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.4.group_pickup_code = +account.4.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.4.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.4.alert_info_url_enable = + +#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav +account.4.ringtone.ring_type = + +account.4.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.4.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.4.conf_uri = + +####################################################################################### +## cid source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.4.cid_source = + +account.4.cid_source_privacy = 1 +account.4.cid_source_ppi = 1 +account.4.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.4.music_on_hold_type = + +account.4.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.4.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.4.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.4.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.4.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.4.dnd.enable = +account.4.dnd.on_code = +account.4.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; +account.4.always_fwd.enable = +account.4.always_fwd.target = +account.4.always_fwd.off_code = +account.4.always_fwd.on_code = + +account.4.busy_fwd.enable = +account.4.busy_fwd.target = +account.4.busy_fwd.off_code = +account.4.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.4.timeout_fwd.enable = +account.4.timeout_fwd.target = +account.4.timeout_fwd.timeout = +account.4.timeout_fwd.off_code = +account.4.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.4.hoteling.enable = 0 +account.4.hoteling.user_id = 0 +account.4.hoteling.password = 0 +account.4.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.4.acd.enable = 0 +account.4.acd.unavailable_reason_enable = 0 +account.4.acd.available = 0 +account.4.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.4.bw_acd_reason_code.Y = 500(lunch time) +account.4.bw_acd_reason_code.1 = + +account.4.reason_code.1 = +account.4.reason_code_name.1 = 0 +account.4.bw_disp_code.1 = +account.4.bw_disp_code_name.1 = +account.4.supervisor_info_code.1 = +account.4.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.4.call_center.call_info_enable = 0 +account.4.call_center.show_call_info_time = 30 +account.4.call_center.disp_code_enable = 0 +account.4.call_center.trace_enable = 0 +account.4.call_center.emergency_enable = 0 +account.4.call_center.queue_status_enable = 0 +account.4.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.4.xsi.user = +account.4.xsi.password = +account.4.xsi.host = +account.4.xsi.server_type = +account.4.xsi.port = + + +####################################################################################### +## Time ## +####################################################################################### +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + + +####################################################################################### +## NETWORK ## +####################################################################################### +##0-ipv4, 1-ipv6, 2-ipv4&ipv6 +network.ip_address_mode = 2 + +network.ipv6_prefix = 64 +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = +network.ipv6_icmp_v6.enable = + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server; +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + +####################################################################################### +## Account 5 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_5) } +account.5.enable = 1 +{else} +account.5.enable = 0 +{/if} +account.5.label = {$display_name_5} +account.5.display_name = {$display_name_5} +account.5.auth_name = {$auth_id_5} +account.5.password = {$user_password_5} +account.5.user_name = {$user_id_5} +account.5.sip_server_host = {$server_address_5} +account.5.sip_server_port = {$sip_port_5} +account.5.outbound_proxy_enable = +account.5.outbound_host = {$outbound_proxy_5} +account.5.outbound_port = 5060 +account.5.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} +{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} +{if $sip_transport_5 == 'tls'}account.5.transport = 2{/if} +{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.5.reregister_enable = 0 +account.5.retry_counts = +account.5.failback_mode = 0 +account.5.failback_timeout = 3600 +account.5.naptr_build = 0 +account.5.fallback.redundancy_type = 0 +account.5.fallback.timeout = 120 +account.5.sip_server.1.address = +account.5.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.sip_server.1.expires = {$register_expires_5} +account.5.sip_server.1.retry_counts = 3 +account.5.sip_server.1.failback_mode = 0 +account.5.sip_server.1.failback_timeout = 3600 +account.5.sip_server.1.register_on_enable = 0 +account.5.sip_server.2.address = +account.5.sip_server.2.port = 5060 +account.5.sip_server.2.expires = 3600 +account.5.sip_server.2.retry_counts = 3 +account.5.sip_server.2.failback_mode = 0 +account.5.sip_server.2.failback_timeout = 3600 +account.5.sip_server.2.register_on_enable = 0 +account.5.dns_cache_type = 1 + +account.5.dns_cache_a.1.name = +account.5.dns_cache_a.1.ip = +account.5.dns_cache_a.1.ttl = 300 + +account.5.dns_cache_srv.1.name = +account.5.dns_cache_srv.1.port = 0 +account.5.dns_cache_srv.1.priority = 0 +account.5.dns_cache_srv.1.target = +account.5.dns_cache_srv.1.weight = 0 +account.5.dns_cache_srv.1.ttl = 300 +account.5.dns_cache_naptr.1.name = +account.5.dns_cache_naptr.1.flags = +account.5.dns_cache_naptr.1.order = 0 +account.5.dns_cache_naptr.1.preference = 0 +account.5.dns_cache_naptr.1.replace = +account.5.dns_cache_naptr.1.service = +account.5.dns_cache_naptr.1.ttl = 300 + +account.5.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.5.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.5.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.5.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.5.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.5.srv_ttl_timer_enable = +account.5.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = 0 + +account.5.nat.stun_server = +account.5.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.5.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = {$yealink_rport_5} + + +####################################################################################### +## Account5 Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.5.advanced.timer_t1 = 0.5 +account.5.advanced.timer_t2 = 4 +account.5.advanced.timer_t4 = 5 + +voice_mail.number.5 = *97 + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.5.subscribe_mwi = 1 +account.5.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = 1 + +account.5.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.5.blf.blf_list_uri = + +account.5.blf_list_code = +account.5.blf_list_barge_in_code = +account.5.blf.subscribe_period = 1800 + +account.5.blf.subscribe_event = +account.5.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.5.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.5.bla_number = +account.5.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.5.codec.Y.enable = +#The type of the specified codec. +#account.5.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.5.codec.Y.priority = +#The payload of the specified codec. +#account.5.codec.Y.rtpmap = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =0 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = 0 +account.5.codec.7.payload_type = iLBC +account.5.codec.7.priority = 0 +account.5.codec.7.rtpmap = 106 + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = G726-16 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 103 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = G726-24 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 104 + +account.5.codec.10.enable = 0 +account.5.codec.10.payload_type = G726-32 +account.5.codec.10.priority = 0 +account.5.codec.10.rtpmap = 102 + +account.5.codec.11.enable = 0 +account.5.codec.11.payload_type = G726-40 +account.5.codec.11.priority = 0 +account.5.codec.11.rtpmap = 105 + +account.5.codec.12.enable = 0 +account.5.codec.12.payload_type = GSM +account.5.codec.12.priority = 0 +account.5.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.5.anonymous_call = 0 +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +account.5.reject_anonymous_call = +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.5.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.5.group_pickup_code = +account.5.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.5.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.5.alert_info_url_enable = + +#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav +account.5.ringtone.ring_type = + +account.5.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.5.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.5.conf_uri = + +####################################################################################### +## cid source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +account.5.cid_source_privacy = 1 +account.5.cid_source_ppi = 1 +account.5.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.5.music_on_hold_type = + +account.5.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.5.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.5.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.5.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.5.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.5.dnd.enable = +account.5.dnd.on_code = +account.5.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; +account.5.always_fwd.enable = +account.5.always_fwd.target = +account.5.always_fwd.off_code = +account.5.always_fwd.on_code = + +account.5.busy_fwd.enable = +account.5.busy_fwd.target = +account.5.busy_fwd.off_code = +account.5.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.5.timeout_fwd.enable = +account.5.timeout_fwd.target = +account.5.timeout_fwd.timeout = +account.5.timeout_fwd.off_code = +account.5.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.5.hoteling.enable = 0 +account.5.hoteling.user_id = 0 +account.5.hoteling.password = 0 +account.5.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.5.acd.enable = 0 +account.5.acd.unavailable_reason_enable = 0 +account.5.acd.available = 0 +account.5.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.5.bw_acd_reason_code.Y = 500(lunch time) +account.5.bw_acd_reason_code.1 = + +account.5.reason_code.1 = +account.5.reason_code_name.1 = 0 +account.5.bw_disp_code.1 = +account.5.bw_disp_code_name.1 = +account.5.supervisor_info_code.1 = +account.5.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.5.call_center.call_info_enable = 0 +account.5.call_center.show_call_info_time = 30 +account.5.call_center.disp_code_enable = 0 +account.5.call_center.trace_enable = 0 +account.5.call_center.emergency_enable = 0 +account.5.call_center.queue_status_enable = 0 +account.5.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.5.xsi.user = +account.5.xsi.password = +account.5.xsi.host = +account.5.xsi.server_type = +account.5.xsi.port = + + +####################################################################################### +## Time ## +####################################################################################### +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + + +####################################################################################### +## NETWORK ## +####################################################################################### +##0-ipv4, 1-ipv6, 2-ipv4&ipv6 +network.ip_address_mode = 2 + +network.ipv6_prefix = 64 +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = +network.ipv6_icmp_v6.enable = + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server; +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = + +####################################################################################### +## Account 6 Basic Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.enable = +{if isset($user_password_6) } +account.6.enable = 1 +{else} +account.6.enable = 0 +{/if} +account.6.label = {$display_name_6} +account.6.display_name = {$display_name_6} +account.6.auth_name = {$auth_id_6} +account.6.password = {$user_password_6} +account.6.user_name = {$user_id_6} +account.6.sip_server_host = {$server_address_6} +account.6.sip_server_port = {$sip_port_6} +account.6.outbound_proxy_enable = +account.6.outbound_host = {$outbound_proxy_6} +account.6.outbound_port = 5060 +account.6.sip_listen_port = 5060 +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} +{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} +{if $sip_transport_6 == 'tls'}account.6.transport = 2{/if} +{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} + +####################################################################################### +## Failback ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.reregister_enable = 0 + +account.6.reregister_enable = 0 +account.6.retry_counts = +account.6.failback_mode = 0 +account.6.failback_timeout = 3600 +account.6.naptr_build = 0 +account.6.fallback.redundancy_type = 0 +account.6.fallback.timeout = 120 +account.6.sip_server.1.address = +account.6.sip_server.1.port = 5060 +#Configure the register expiry time (in seconds), the default value is 3600. +account.6.sip_server.1.expires = {$register_expires_6} +account.6.sip_server.1.retry_counts = 3 +account.6.sip_server.1.failback_mode = 0 +account.6.sip_server.1.failback_timeout = 3600 +account.6.sip_server.1.register_on_enable = 0 +account.6.sip_server.2.address = +account.6.sip_server.2.port = 5060 +account.6.sip_server.2.expires = 3600 +account.6.sip_server.2.retry_counts = 3 +account.6.sip_server.2.failback_mode = 0 +account.6.sip_server.2.failback_timeout = 3600 +account.6.sip_server.2.register_on_enable = 0 +account.6.dns_cache_type = 1 + +account.6.dns_cache_a.1.name = +account.6.dns_cache_a.1.ip = +account.6.dns_cache_a.1.ttl = 300 + +account.6.dns_cache_srv.1.name = +account.6.dns_cache_srv.1.port = 0 +account.6.dns_cache_srv.1.priority = 0 +account.6.dns_cache_srv.1.target = +account.6.dns_cache_srv.1.weight = 0 +account.6.dns_cache_srv.1.ttl = 300 +account.6.dns_cache_naptr.1.name = +account.6.dns_cache_naptr.1.flags = +account.6.dns_cache_naptr.1.order = 0 +account.6.dns_cache_naptr.1.preference = 0 +account.6.dns_cache_naptr.1.replace = +account.6.dns_cache_naptr.1.service = +account.6.dns_cache_naptr.1.ttl = 300 + +account.6.static_cache_pri = 0 + +####################################################################################### +## Register Advanced ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.sip_server_type = + +#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; +account.6.sip_server_type = +#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; +account.6.unregister_on_reboot = + +#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; +account.6.sip_trust_ctrl = + +#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. +account.6.dns_query_timeout= + +#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; +account.6.srv_ttl_timer_enable = +account.6.proxy_require = + + +#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; +account.6.register_mac = +account.6.register_line = + +#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.6.reg_fail_retry_interval = + +######################################################################### +## NAT Settings ## +######################################################################### +## X ranges from 1 to 6; +##account.X.nat.nat_traversal = 0 + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.6.nat.nat_traversal = 0 + +account.6.nat.stun_server = +account.6.nat.stun_port = 3478 + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; +account.6.nat.udp_update_enable = 1 + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.6.nat.udp_update_time = 30 + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.6.nat.rport = {$yealink_rport_6} + + +####################################################################################### +## Account6 Advance Settings ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.advanced.timer_t1 = 0.5 +##voice_mail.number.X = + +#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. +account.6.advanced.timer_t1 = 0.5 +account.6.advanced.timer_t2 = 4 +account.6.advanced.timer_t4 = 5 + +voice_mail.number.6 = *97 + + +####################################################################################### +## Subscribe ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.subscribe_mwi = + +account.6.subscribe_mwi = 1 +account.6.subscribe_mwi_expires = 3600 + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.6.subscribe_mwi_to_vm = 1 + +account.6.subscribe_acd_expires= 3600 + + +####################################################################################### +## BLF List ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.blf.blf_list_uri = + +#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". +account.6.blf.blf_list_uri = + +account.6.blf_list_code = +account.6.blf_list_barge_in_code = +account.6.blf.subscribe_period = 1800 + +account.6.blf.subscribe_event = +account.6.out_dialog_blf_enable = 0 + + +####################################################################################### +## BLA/SCA ## +####################################################################################### +## X ranges from 1 to 6; +##account.X.shared_line = + +#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; +account.6.shared_line = + +#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. +account.6.bla_number = +account.6.bla_subscribe_period = 300 + +####################################################################################### +## Audio Codec ## +####################################################################################### +#Audio codecs for account1 (Y ranges from 1 to 11). +#Enable or disable the specified codec; 0-Disabled, 1-Enabled; +#account.6.codec.Y.enable = +#The type of the specified codec. +#account.6.codec.Y.payload_type = +#The priority of the specified codec. It's available when the codec is enabled. +#account.6.codec.Y.priority = +#The payload of the specified codec. +#account.6.codec.Y.rtpmap = + +account.6.codec.1.enable = 1 +account.6.codec.1.payload_type = PCMU +account.6.codec.1.priority = 1 +account.6.codec.1.rtpmap = 0 + +account.6.codec.2.enable = 1 +account.6.codec.2.payload_type = PCMA +account.6.codec.2.priority = 2 +account.6.codec.2.rtpmap = 8 + +account.6.codec.3.enable = 0 +account.6.codec.3.payload_type = G723_53 +account.6.codec.3.priority =0 +account.6.codec.3.rtpmap = 4 + +account.6.codec.4.enable = 0 +account.6.codec.4.payload_type = G723_63 +account.6.codec.4.priority = 0 +account.6.codec.4.rtpmap = 4 + +account.6.codec.5.enable = 1 +account.6.codec.5.payload_type = G729 +account.6.codec.5.priority = 3 +account.6.codec.5.rtpmap = 18 + +account.6.codec.6.enable = 1 +account.6.codec.6.payload_type = G722 +account.6.codec.6.priority = 4 +account.6.codec.6.rtpmap = 9 + +account.6.codec.7.enable = 0 +account.6.codec.7.payload_type = iLBC +account.6.codec.7.priority = 0 +account.6.codec.7.rtpmap = 106 + +account.6.codec.8.enable = 0 +account.6.codec.8.payload_type = G726-16 +account.6.codec.8.priority = 0 +account.6.codec.8.rtpmap = 103 + +account.6.codec.9.enable = 0 +account.6.codec.9.payload_type = G726-24 +account.6.codec.9.priority = 0 +account.6.codec.9.rtpmap = 104 + +account.6.codec.10.enable = 0 +account.6.codec.10.payload_type = G726-32 +account.6.codec.10.priority = 0 +account.6.codec.10.rtpmap = 102 + +account.6.codec.11.enable = 0 +account.6.codec.11.payload_type = G726-40 +account.6.codec.11.priority = 0 +account.6.codec.11.rtpmap = 105 + +account.6.codec.12.enable = 0 +account.6.codec.12.payload_type = GSM +account.6.codec.12.priority = 0 +account.6.codec.12.rtpmap = 3 + + +####################################################################################### +## Audio Advanced ## +####################################################################################### +#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.6.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.6.ptime = + + +####################################################################################### +## Anonymous Call ## +####################################################################################### +account.6.anonymous_call = 0 +account.6.anonymous_call_oncode = +account.6.anonymous_call_offcode = + +account.6.reject_anonymous_call = +account.6.anonymous_reject_oncode = +account.6.anonymous_reject_offcode = + +####################################################################################### +## Pickup Code ## +####################################################################################### +account.5.dialoginfo_callpickup = 0 + +#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. +account.6.group_pickup_code = +account.56.direct_pickup_code = + +####################################################################################### +## DTMF ## +####################################################################################### +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.6.dtmf.type = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; +account.6.dtmf.info_type = + +#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. +account.6.dtmf.dtmf_payload = + +####################################################################################### +## Alert info ## +####################################################################################### +#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); +account.6.alert_info_url_enable = + +#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. +#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav +#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav +account.6.ringtone.ring_type = + +account.6.picture_info_enable = 1 + +####################################################################################### +## Conference ## +####################################################################################### +#Configure the conference type; 0-Local (default), 2-Network Conference; +account.6.conf_type = + +#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". +account.6.conf_uri = + +####################################################################################### +## cid source ## +####################################################################################### +#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; +account.5.cid_source = + +account.6.cid_source_privacy = 1 +account.6.cid_source_ppi = 1 +account.6.cp_source = 0 + +####################################################################################### +## Session Timer ## +####################################################################################### +#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; +account.6.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.6.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.6.session_timer.refresher = + +####################################################################################### +## Music on Hold ## +####################################################################################### +#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; +#Require reboot; +account.6.music_on_hold_type = + +account.6.music_server_uri = + +####################################################################################### +## Advanced ## +####################################################################################### +#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; +account.6.auto_answer = + +#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); +account.6.missed_calllog = + +#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; +account.6.100rel_enable = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.6.enable_user_equal_phone = + +#Enbale or diable the simplified header field feature; 0-Disabled, 1-Enabled (default); +account.6.compact_header_enable = + +####################################################################################### +## DND ## +####################################################################################### +account.6.dnd.enable = +account.6.dnd.on_code = +account.6.dnd.off_code = + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; +account.6.always_fwd.enable = +account.6.always_fwd.target = +account.6.always_fwd.off_code = +account.6.always_fwd.on_code = + +account.6.busy_fwd.enable = +account.6.busy_fwd.target = +account.6.busy_fwd.off_code = +account.6.busy_fwd.on_code = + +#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; +#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. +account.6.timeout_fwd.enable = +account.6.timeout_fwd.target = +account.6.timeout_fwd.timeout = +account.6.timeout_fwd.off_code = +account.6.timeout_fwd.on_code = + +####################################################################################### +## Broadsoft Hoteling ## +####################################################################################### +account.6.hoteling.enable = 0 +account.6.hoteling.user_id = 0 +account.6.hoteling.password = 0 +account.6.hoteling.auto_login_enable = 0 + +####################################################################################### +## Broadsoft ACD ## +####################################################################################### +account.6.acd.enable = 0 +account.6.acd.unavailable_reason_enable = 0 +account.6.acd.available = 0 +account.6.acd.initial_state = 1 + +####################################################################################### +## Broadsoft ACD Call Center ## +####################################################################################### +#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) +#account.6.bw_acd_reason_code.Y = 500(lunch time) +account.6.bw_acd_reason_code.1 = + +account.6.reason_code.1 = +account.6.reason_code_name.1 = 0 +account.6.bw_disp_code.1 = +account.6.bw_disp_code_name.1 = +account.6.supervisor_info_code.1 = +account.6.supervisor_info_code_name.1 = + +####################################################################################### +## Broadsoft Call Center ## +####################################################################################### +account.6.call_center.call_info_enable = 0 +account.6.call_center.show_call_info_time = 30 +account.6.call_center.disp_code_enable = 0 +account.6.call_center.trace_enable = 0 +account.6.call_center.emergency_enable = 0 +account.6.call_center.queue_status_enable = 0 +account.6.call_center.queue_status_light_enable = 0 + +####################################################################################### +## Broadsoft XSI ## +####################################################################################### +account.6.xsi.user = +account.6.xsi.password = +account.6.xsi.host = +account.6.xsi.server_type = +account.6.xsi.port = + + +####################################################################################### +## Time ## +####################################################################################### +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = +local_time.time_zone_name = + + +####################################################################################### +## NETWORK ## +####################################################################################### +##0-ipv4, 1-ipv6, 2-ipv4&ipv6 +network.ip_address_mode = 2 + +network.ipv6_prefix = 64 +network.ipv6_internet_port.type = +network.ipv6_internet_port.ip = +network.ipv6_internet_port.gateway = +network.ipv6_primary_dns = +network.ipv6_secondary_dns = +network.ipv6_icmp_v6.enable = + +#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, subnet mask, gateway and DNS server; +#Require Reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns = +network.secondary_dns = +network.static_dns_enable = 0 + +####################################################################################### +## Line Key ## +####################################################################################### + +#The x of the parameter "linekey.x.line" ranges from 1 to 6. +#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. +#linekey.x.lable--Define the label for each line key. Meet-Me Conference "1" or BLF "16" require pick_value. + +{foreach $keys as $row} +{if $row.device_key_category == "line"} +#Configure Line Key {$row.device_key_id} +linekey.{$row.device_key_id}.line = {$row.device_key_line} +linekey.{$row.device_key_id}.value = {$row.device_key_value} +{if $row.device_key_type == "1" || $row.device_key_type == "16"} +linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} +{else} +linekey.{$row.device_key_id}.extension = {$row.device_key_extension} +{/if} +linekey.{$row.device_key_id}.type = {$row.device_key_type} +linekey.{$row.device_key_id}.xml_phonebook = +linekey.{$row.device_key_id}.label = {$row.device_key_label} + +{/if} +{/foreach}