From 61da142d13f4a0cb4a03474b70d8ebfc49eea9c1 Mon Sep 17 00:00:00 2001 From: Len Date: Thu, 5 Oct 2017 21:44:31 -0400 Subject: [PATCH] Update {$mac}.cfg --- .../provision/yealink/t46s/{$mac}.cfg | 3356 ++--------------- 1 file changed, 357 insertions(+), 2999 deletions(-) diff --git a/resources/templates/provision/yealink/t46s/{$mac}.cfg b/resources/templates/provision/yealink/t46s/{$mac}.cfg index 3eae18687f..08a474902f 100644 --- a/resources/templates/provision/yealink/t46s/{$mac}.cfg +++ b/resources/templates/provision/yealink/t46s/{$mac}.cfg @@ -1,12 +1,81 @@ + #!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## +##account.X.*:(T54S/T48G/T48S/T46G/T46S/T29G: X ranges from 1 to 16. T52S/T42G/T42S: X ranges from 1 to 12. T41P/T41S/T27P/T27G: X ranges from 1 to 6. T40P/T40G/T23P/T23G: X ranges from 1 to 3. T21(P) E2: X ranges from 1 to 2.)## ####################################################################################### -## Account 1 Basic Settings ## +## Trnasfer ## ####################################################################################### -## ranges from 1 to 6; -##account.X.enable = +account.1.phone_setting.call_appearance.transfer_via_new_linekey= + + +####################################################################################### +## Conference ## +####################################################################################### +account.1.phone_setting.call_appearance.conference_via_new_linekey= + + +####################################################################################### +## Anonymous ## +####################################################################################### +account.1.anonymous_call.server_base_only = +account.1.send_anonymous_rejection_code = +account.1.anonymous_reject_offcode = +account.1.anonymous_reject_oncode = +account.1.reject_anonymous_call= +account.1.anonymous_call_offcode = +account.1.anonymous_call_oncode = +account.1.anonymous_call = +account.1.send_anonymous_code = + + + +####################################################################################### +## Call Configuration ## +####################################################################################### +account.1.music_server_uri= +account.1.music_on_hold_type= +account.1.auto_label.rule= +account.1.auto_label.enable= +account.1.number_of_linekey= +account.1.phone_setting.call_appearance.calls_per_linekey= + + +####################################################################################### +## Codec ## +####################################################################################### +account.1.codec.ilbc_15_2kbps.priority= +account.1.codec.ilbc_15_2kbps.enable= +account.1.codec.ilbc_13_33kbps.priority= +account.1.codec.ilbc_13_33kbps.enable = +account.1.codec.pcma.enable= +account.1.codec.pcma.priority= +account.1.codec.pcmu.enable= +account.1.codec.pcmu.priority= +account.1.codec.opus.priority = +account.1.codec.opus.enable= +account.1.codec.opus.para= +account.1.codec.g726_40.enable= +account.1.codec.g726_40.priority= +account.1.codec.g726_32.enable= +account.1.codec.g726_32.priority= +account.1.codec.g726_24.enable= +account.1.codec.g726_24.priority= +account.1.codec.g726_16.enable= +account.1.codec.g726_16.priority= +account.1.codec.g723_63.priority= +account.1.codec.g723_63.enable= +account.1.codec.g723_53.priority= +account.1.codec.g723_53.enable= +account.1.codec.g729.priority= +account.1.codec.g729.enable= +account.1.codec.g722.priority= +account.1.codec.g722.enable= + +################################################################ +# Account Register ## +################################################################ {if isset($user_password_1) } account.1.enable = 1 {else} @@ -17,463 +86,332 @@ account.1.display_name = {$display_name_1} account.1.auth_name = {$auth_id_1} account.1.password = {$user_password_1} account.1.user_name = {$user_id_1} -account.1.sip_server_host = {$server_address_1} -account.1.sip_server_port = {$sip_port_1} -account.1.outbound_host = {$outbound_proxy_1} -account.1.outbound_port = {$sip_port_1} -{if isset($yealink_sip_listen_port)}account.1.sip_listen_port = {$yealink_sip_listen_port}{else}account.1.sip_listen_port = 5060{/if} -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} -{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} -{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if} -{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} -account.1.outbound_proxy.1.address = {$outbound_proxy_primary_1} -account.1.outbound_proxy.2.address = {$outbound_proxy_secondary_1} -account.1.outbound_proxy_enable = {if isset($outbound_proxy_primary_1)}1{else}0{/if} +account.1.sip_server.1.address= {$server_address_1} +account.1.sip_server.1.port= {$sip_port_1} + + +{if $sip_transport_1 == 'udp'}account.1.sip_server.1.transport_type = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.sip_server.1.transport_type = 1{/if} +{if $sip_transport_1 == 'tls'}account.1.sip_server.1.transport_type = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.sip_server.1.transport_type = 3{/if} + +account.1.sip_server.1.expires= {$register_expires_1} +account.1.sip_server.1.retry_counts= 3 + +account.1.sip_server.2.address= {$server_address_2} +account.1.sip_server.2.port= {$sip_port_2} + + +{if $sip_transport_1 == 'udp'}account.1.sip_server.2.transport_type = 0{/if} +{if $sip_transport_1 == 'tcp'}account.1.sip_server.2.transport_type = 1{/if} +{if $sip_transport_1 == 'tls'}account.1.sip_server.2.transport_type = 2{/if} +{if $sip_transport_1 == 'dns srv'}account.1.sip_server.2.transport_type = 3{/if} + +account.1.sip_server.2.expires= {$register_expires_2} +account.1.sip_server.2.retry_counts= 3 + +account.1.outbound_proxy_enable= {if isset($outbound_proxy_primary_1)}1{else}0{/if} + +account.1.outbound_proxy.1.address= {$outbound_proxy_primary_1} {if isset($outbound_proxy_1_port)} account.1.outbound_proxy.1.port = {$outbound_proxy_1_port} {else} account.1.outbound_proxy.1.port = 5060 {/if} + +account.1.outbound_proxy.2.address= {$outbound_proxy_secondary_1} + {if isset($outbound_proxy_1_port)} account.1.outbound_proxy.2.port = {$outbound_proxy_2_port} {else} account.1.outbound_proxy.2.port = 5060 {/if} -####################################################################################### -## Failback ## -####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 - -account.1.reregister_enable = 0 -account.1.retry_counts = -account.1.failback_mode = 0 -account.1.failback_timeout = 3600 -account.1.naptr_build = 0 -account.1.fallback.redundancy_type = 0 -account.1.fallback.timeout = 120 -account.1.sip_server.1.address = -{if $sip_transport_1 == 'dns srv'} -account.1.sip_server.1.port = 0 -{else} -account.1.sip_server.1.port = {$sip_port_1} -{/if} -#Configure the register expiry time (in seconds), the default value is 3600. -account.1.sip_server.1.expires = {$register_expires_1} -account.1.sip_server.1.retry_counts = 3 -account.1.sip_server.1.failback_mode = 0 -account.1.sip_server.1.failback_timeout = 3600 -account.1.sip_server.1.register_on_enable = 0 -account.1.sip_server.2.address = -account.1.sip_server.2.port = 5060 -account.1.sip_server.2.expires = 3600 -account.1.sip_server.2.retry_counts = 3 -account.1.sip_server.2.failback_mode = 0 -account.1.sip_server.2.failback_timeout = 3600 -account.1.sip_server.2.register_on_enable = 0 -account.1.dns_cache_type = 1 - -account.1.dns_cache_a.1.name = -account.1.dns_cache_a.1.ip = -account.1.dns_cache_a.1.ttl = 300 - -account.1.dns_cache_srv.1.name = -account.1.dns_cache_srv.1.port = 0 -account.1.dns_cache_srv.1.priority = 0 -account.1.dns_cache_srv.1.target = -account.1.dns_cache_srv.1.weight = 0 -account.1.dns_cache_srv.1.ttl = 300 -account.1.dns_cache_naptr.1.name = -account.1.dns_cache_naptr.1.flags = -account.1.dns_cache_naptr.1.order = 0 -account.1.dns_cache_naptr.1.preference = 0 -account.1.dns_cache_naptr.1.replace = -account.1.dns_cache_naptr.1.service = -account.1.dns_cache_naptr.1.ttl = 300 - -account.1.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.1.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.1.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.1.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.1.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.1.srv_ttl_timer_enable = -account.1.proxy_require = +account.1.outbound_proxy_fallback_interval= +account.1.nat.nat_traversal= -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.1.register_mac = -account.1.register_line = +################################################################ +# Account Basic ## +################################################################ +account.1.proxy_require= +account.1.auto_answer= -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.1.reg_fail_retry_interval = +################################################################ +# Account Advanced ## +################################################################ +account.1.nat.udp_update_enable= 3 +account.1.nat.udp_update_time= 30 +account.1.nat.rport= {$yealink_rport} -######################################################################### -## NAT Settings ## -######################################################################### +account.1.dtmf.type= +account.1.dtmf.info_type= +account.1.dtmf.dtmf_payload= +account.1.100rel_enable= {$yealink_retransmission} -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} +account.1.subscribe_register= +account.1.cid_source= {$yealink_cid_source} +account.1.enable_user_equal_phone= +account.1.srtp_encryption= {$yealink_srtp_encryption} +account.1.ptime= 20 +account.1.register_line= +account.1.register_mac= +account.1.reg_fail_retry_interval= +account.1.unregister_on_reboot= -#Configure the STUN server address. -account.1.nat.stun_server = {$stun_server} +account.1.session_timer.refresher= +account.1.session_timer.expires= +account.1.session_timer.enable= {$yealink_session_timer} -#Configure the STUN server port, the default value is 3478. -account.1.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} +account.1.conf_type= +account.1.sip_server_type= -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.1.nat.udp_update_enable = 3 -#Specify the keep-alive interval (in seconds), the default value is 30. -account.1.nat.udp_update_time = 30 +################################################################ +# SIP Backup Server ## +################################################################ +account.1.outbound_proxy.1.register_on_enable= +account.1.outbound_proxy.1.failback_timeout= +account.1.outbound_proxy.1.failback_mode= +account.1.outbound_proxy.1.retry_counts= +account.1.outbound_proxy.1.only_signal_with_registered= +account.1.outbound_proxy.1.failback_subscribe.enable= +account.1.outbound_proxy.1.invite_retry_counts= -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.1.nat.rport = {$yealink_rport} +account.1.sip_server.1.register_on_enable= 0 +account.1.sip_server.1.failback_timeout= 3600 +account.1.sip_server.1.failback_mode= 0 +account.1.sip_server.1.failback_subscribe.enable= +account.1.sip_server.1.only_signal_with_registered= +account.1.sip_server.1.invite_retry_counts= + +account.1.outbound_proxy.2.register_on_enable= +account.1.outbound_proxy.2.failback_timeout= +account.1.outbound_proxy.2.failback_mode= +account.1.outbound_proxy.2.retry_counts= +account.1.outbound_proxy.2.only_signal_with_registered= +account.1.outbound_proxy.2.failback_subscribe.enable= +account.1.outbound_proxy.2.invite_retry_counts= + +account.1.sip_server.2.register_on_enable= +account.1.sip_server.2.failback_timeout= +account.1.sip_server.2.failback_mode= +account.1.sip_server.2.failback_subscribe.enable= +account.1.sip_server.2.only_signal_with_registered= +account.1.sip_server.2.invite_retry_counts= + +account.1.static_cache_pri= +account.1.dns_cache_type= +account.1.naptr_build= +account.1.fallback.timeout= +account.1.fallback.redundancy_type= +account.1.reg_failed_retry_max_time= +account.1.reg_failed_retry_min_time= +account.1.redundancy_with_reg_fail.enable = + + +################################################################ +# SIP Basic config ## +################################################################ +account.1.contact_take_line_param.enable= +account.1.update_ack_while_dialing= +account.1.srtp_lifetime= +account.1.third_part_request_with_route.enable= +account.1.insert_outbound_in_route.enable= +account.1.path.enable= +account.1.rereg_with_auth.enable= +account.1.sub_fail_retry_interval= +account.1.transfer_refer_to_contact_header.enable= +account.1.hold_use_inactive= +account.1.gruu.enable= +account.1.dial_tone= +account.1.call_id_mode= +account.1.subscribe_expires_overlap= +account.1.register_expires_overlap= +account.1.call_info= +account.1.custom_ua= +account.1.mwi_parse_terminated= +account.1.check_cseq.enable= +account.1.check_to_tag.enable= +account.1.vq_rtcpxr.collector_server_port= +account.1.vq_rtcpxr.collector_server_host= +account.1.vq_rtcpxr.collector_name= +account.1.compact_header_enable= +account.1.cp_source= +account.1.cid_source_ppi= +account.1.cid_source_privacy= + +account.1.alert_info= +account.1.picture_info_enable= ####################################################################################### -## AccountX Advance Settings ## +## History ## ####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = +account.1.missed_calllog= -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.1.advanced.timer_t1 = -account.1.advanced.timer_t2 = -account.1.advanced.timer_t4 = -voice_mail.number.1 = {$voicemail_number} +####################################################################################### +## Forward ## +####################################################################################### +account.1.timeout_fwd.off_code= +account.1.timeout_fwd.on_code= +account.1.timeout_fwd.timeout= +account.1.timeout_fwd.target= +account.1.timeout_fwd.enable= +account.1.busy_fwd.off_code= +account.1.busy_fwd.on_code= +account.1.busy_fwd.target= +account.1.busy_fwd.enable= +account.1.always_fwd.off_code= +account.1.always_fwd.on_code= +account.1.always_fwd.target= +account.1.always_fwd.enable= + + +####################################################################################### +## DND ## +####################################################################################### +account.1.dnd.enable= +account.1.dnd.off_code= +account.1.dnd.on_code= + + + +####################################################################################### +## Voice Mail ## +####################################################################################### +voice_mail.number.1= {$voicemail_number} +account.1.subscribe_mwi= +account.1.subscribe_mwi_to_vm= +account.1.subscribe_mwi_expires= +account.1.display_mwi.enable= + +####################################################################################### +## Auto Dial ## +####################################################################################### +account.1.auto_dial_enable= +account.1.auto_dial_num= ####################################################################################### -## Subscribe ## +## Preference&Status ## ####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = +account.1.ringtone.ring_type= -account.1.subscribe_mwi = 1 -account.1.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.1.subscribe_mwi_to_vm = 1 - -account.1.subscribe_acd_expires= 3600 +####################################################################################### +## Digitmap ## +####################################################################################### +account.1.dialplan.digitmap.enable= +account.1.dialplan.digitmap.string= +account.1.dialplan.digitmap.no_match_action= +account.1.dialplan.digitmap.interdigit_short_timer= +account.1.dialplan.digitmap.interdigit_long_timer= +account.1.dialplan.digitmap.apply_to.press_send= +account.1.dialplan.digitmap.apply_to.forward= +account.1.dialplan.digitmap.apply_to.history_dial= +account.1.dialplan.digitmap.apply_to.directory_dial= +account.1.dialplan.digitmap.apply_to.on_hook_dial= +account.1.dialplan.digitmap.active.on_hook_dialing= ####################################################################################### -## BLF List ## +## Rings Settings ## ####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.1.blf.blf_list_uri = - -account.1.blf_list_code = -account.1.blf_list_barge_in_code = -account.1.blf.subscribe_period = 1800 - -account.1.blf.subscribe_event = -account.1.out_dialog_blf_enable = 0 +account.1.alert_info_url_enable= ####################################################################################### -## BLA/SCA ## +## BLF/BLF List ## ####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_1) } -account.1.shared_line = {$shared_line_1} -{else} -account.1.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.1.bla_number = -account.1.bla_subscribe_period = 300 +account.1.blf.blf_list_uri= +account.1.blf_list_barge_in_code= +account.1.blf_list_code= +account.1.blf_list_retrieve_call_parked_code= +account.1.blf.subscribe_period= +account.1.blf.match_host.enable= +account.1.out_dialog_blf_enable= +account.1.blf.subscribe_event= ####################################################################################### -## Audio Codec ## +## SCA ## ####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.1.codec.Y.enable = -#The type of the specified codec. -#account.1.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.1.codec.Y.priority = -#The payload of the specified codec. -#account.1.codec.Y.rtpmap = +account.1.shared_line= {$shared_line_1} +account.1.line_seize.expires= +account.1.shared_line_one_touch_bargein.enable= +account.1.shared_line_one_touch_retrieve.enable= +account.1.sca_manage_interface_display_time= +account.1.shared_line_callpull_code= -account.1.codec.1.enable = 1 -account.1.codec.1.payload_type = PCMU -account.1.codec.1.priority = 2 -account.1.codec.1.rtpmap = 0 +####################################################################################### +## BLA ## +####################################################################################### +account.1.bla_number= +account.1.bla_subscribe_period= +account.1.bla.notify_with_expire.enable= +account.1.bla.subscribe_uri_build_type= -account.1.codec.2.enable = 1 -account.1.codec.2.payload_type = PCMA -account.1.codec.2.priority = 3 -account.1.codec.2.rtpmap = 8 - -account.1.codec.3.enable = 0 -account.1.codec.3.payload_type = G723_53 -account.1.codec.3.priority =0 -account.1.codec.3.rtpmap = 4 - -account.1.codec.4.enable = 0 -account.1.codec.4.payload_type = G723_63 -account.1.codec.4.priority = 0 -account.1.codec.4.rtpmap = 4 - -account.1.codec.5.enable = 1 -account.1.codec.5.payload_type = G729 -account.1.codec.5.priority = 3 -account.1.codec.5.rtpmap = 18 - -account.1.codec.6.enable = 1 -account.1.codec.6.payload_type = G722 -account.1.codec.6.priority = 1 -account.1.codec.6.rtpmap = 9 - -account.1.codec.7.enable = 0 -account.1.codec.7.payload_type = iLBC -account.1.codec.7.priority = 0 -account.1.codec.7.rtpmap = 106 - -account.1.codec.8.enable = 0 -account.1.codec.8.payload_type = G726-16 -account.1.codec.8.priority = 0 -account.1.codec.8.rtpmap = 103 - -account.1.codec.9.enable = 0 -account.1.codec.9.payload_type = G726-24 -account.1.codec.9.priority = 0 -account.1.codec.9.rtpmap = 104 - -account.1.codec.10.enable = 0 -account.1.codec.10.payload_type = G726-32 -account.1.codec.10.priority = 0 -account.1.codec.10.rtpmap = 102 - -account.1.codec.11.enable = 0 -account.1.codec.11.payload_type = G726-40 -account.1.codec.11.priority = 0 -account.1.codec.11.rtpmap = 105 - -account.1.codec.12.enable = 0 -account.1.codec.12.payload_type = GSM -account.1.codec.12.priority = 0 -account.1.codec.12.rtpmap = 3 +####################################################################################### +## Call Park ## +####################################################################################### +account.1.callpark_enable= ####################################################################################### -## Audio Advanced ## +## Broadsoft ACD ## ####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.1.srtp_encryption = {$yealink_srtp_encryption} - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.1.ptime = +account.1.acd.enable= +account.1.acd.available= +account.1.acd.unavailable_reason_enable= +account.1.acd.initial_state= +account.1.subscribe_acd_expires= ####################################################################################### -## Anonymous Call ## +## Broadsoft ACD Call Center ## ####################################################################################### -account.1.anonymous_call = 0 -account.1.anonymous_call_oncode = -account.1.anonymous_call_offcode = +##account.X.reason_code.Y= +##account.X.reason_code_name.Y= +##account.X.bw_disp_code.Y= +##account.X.bw_disp_code_name.Y= +##account.X.supervisor_info_code.Y= +##account.X.supervisor_info_code_name.Y= +##The value Y must be continuous. -account.1.reject_anonymous_call = -account.1.anonymous_reject_oncode = -account.1.anonymous_reject_offcode = +account.1.reason_code.1= +account.1.reason_code_name.1= +account.1.bw_disp_code.1= +account.1.bw_disp_code_name.1= +account.1.supervisor_info_code.1= +account.1.supervisor_info_code_name.1= ####################################################################################### -## Pickup Code ## +## Broadsoft Call Center ## ####################################################################################### -account.1.dialoginfo_callpickup = 0 +account.1.call_center.call_info_enable= +account.1.call_center.show_call_info_time= +account.1.call_center.disp_code_enable= +account.1.call_center.trace_enable= +account.1.call_center.emergency_enable= +account.1.call_center.queue_status_enable= +account.1.call_center.queue_status_light_enable = + -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.1.group_pickup_code = -account.1.direct_pickup_code = ####################################################################################### -## DTMF ## +## Broadsoft Hoteling ## ####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.1.dtmf.type = +account.1.hoteling.enable= +account.1.hoteling.user_id= +account.1.hoteling.password= +account.1.hoteling.expires= +account.1.hoteling.auto_login_enable= -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.1.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.1.dtmf.dtmf_payload = ####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.1.alert_info_url_enable = - -#Assign a ringtone for account1. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.1.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.1.ringtone.ring_type = Resource:Ring2.wav -account.1.ringtone.ring_type = - -account.1.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.1.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.1.conf_uri = - -####################################################################################### -## cid_source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.1.cid_source = {$yealink_cid_source} - -account.1.cid_source_privacy = 1 -account.1.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.1.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.1.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.1.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.1.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.1.music_on_hold_type = - -account.1.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.1.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.1.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.1.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.1.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.1.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.1.dnd.enable = -account.1.dnd.on_code = -account.1.dnd.off_code = - -####################################################################################### -## Call Forward ## -####################################################################################### - -account.1.always_fwd.enable = -account.1.always_fwd.target = -account.1.always_fwd.off_code = -account.1.always_fwd.on_code = - -account.1.busy_fwd.enable = -account.1.busy_fwd.target = -account.1.busy_fwd.off_code = -account.1.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.1.timeout_fwd.enable = -account.1.timeout_fwd.target = -account.1.timeout_fwd.timeout = -account.1.timeout_fwd.off_code = -account.1.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## -####################################################################################### -account.1.hoteling.enable = 0 -account.1.hoteling.user_id = 0 -account.1.hoteling.password = 0 -account.1.hoteling.auto_login_enable = 0 - -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.1.acd.enable = 0 -account.1.acd.unavailable_reason_enable = 0 -account.1.acd.available = 0 -account.1.acd.initial_state = 1 - -####################################################################################### -## Broadsoft ACD Call Center ## -####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.1.bw_acd_reason_code.Y = 500(lunch time) -account.1.bw_acd_reason_code.1 = - -account.1.reason_code.1 = -account.1.reason_code_name.1 = 0 -account.1.bw_disp_code.1 = -account.1.bw_disp_code_name.1 = -account.1.supervisor_info_code.1 = -account.1.supervisor_info_code_name.1 = - -####################################################################################### -## Broadsoft Call Center ## -####################################################################################### -account.1.call_center.call_info_enable = 0 -account.1.call_center.show_call_info_time = 30 -account.1.call_center.disp_code_enable = 0 -account.1.call_center.trace_enable = 0 -account.1.call_center.emergency_enable = 0 -account.1.call_center.queue_status_enable = 0 -account.1.call_center.queue_status_light_enable = 0 - -####################################################################################### -## Broadsoft XSI ## +## Broadsoft XSI ## ####################################################################################### account.1.xsi.user = account.1.xsi.password = @@ -483,2636 +421,56 @@ account.1.xsi.port = ####################################################################################### -## Account 2 Basic Settings ## +## Call Pickup ## ####################################################################################### -## ranges from 1 to 6; -##account.X.enable = -{if isset($user_password_2) } -account.2.enable = 1 -{else} -account.2.enable = 0 -{/if} -account.2.label = {$display_name_2} -account.2.display_name = {$display_name_2} -account.2.auth_name = {$auth_id_2} -account.2.password = {$user_password_2} -account.2.user_name = {$user_id_2} -account.2.sip_server_host = {$server_address_2} -account.2.sip_server_port = {$sip_port_2} -account.2.outbound_host = {$outbound_proxy_2} -account.2.outbound_port = 5060 -account.2.sip_listen_port = 5060 -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} -{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} -{if $sip_transport_2 == 'tls'}account.2.transport = 2{/if} -{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} +account.1.direct_pickup_code = +account.1.group_pickup_code = +account.1.dialoginfo_callpickup = +account.1.refresh_remote_id.enable = -account.2.outbound_proxy.1.address = {$outbound_proxy_primary_2} -account.2.outbound_proxy.2.address = {$outbound_proxy_secondary_2} -account.2.outbound_proxy_enable = {if isset($outbound_proxy_primary_2)}1{else}0{/if} ####################################################################################### -## Failback ## +## Broadsoft Call Recording ## ####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 +account.1.call_recording.enable= -account.2.reregister_enable = 0 -account.2.retry_counts = -account.2.failback_mode = 0 -account.2.failback_timeout = 3600 -account.2.naptr_build = 0 -account.2.fallback.redundancy_type = 0 -account.2.fallback.timeout = 120 -account.2.sip_server.1.address = -account.2.sip_server.1.port = 5060 -#Configure the register expiry time (in seconds), the default value is 3600. -account.2.sip_server.1.expires = {$register_expires_2} -account.2.sip_server.1.retry_counts = 3 -account.2.sip_server.1.failback_mode = 0 -account.2.sip_server.1.failback_timeout = 3600 -account.2.sip_server.1.register_on_enable = 0 -account.2.sip_server.2.address = -account.2.sip_server.2.port = 5060 -account.2.sip_server.2.expires = 3600 -account.2.sip_server.2.retry_counts = 3 -account.2.sip_server.2.failback_mode = 0 -account.2.sip_server.2.failback_timeout = 3600 -account.2.sip_server.2.register_on_enable = 0 -account.2.dns_cache_type = 1 - -account.2.dns_cache_a.1.name = -account.2.dns_cache_a.1.ip = -account.2.dns_cache_a.1.ttl = 300 - -account.2.dns_cache_srv.0.name = -account.2.dns_cache_srv.0.port = 0 -account.2.dns_cache_srv.0.priority = 0 -account.2.dns_cache_srv.0.target = -account.2.dns_cache_srv.0.weight = 0 -account.2.dns_cache_srv.0.ttl = 300 -account.2.dns_cache_naptr.0.name = -account.2.dns_cache_naptr.0.flags = -account.2.dns_cache_naptr.0.order = 0 -account.2.dns_cache_naptr.0.preference = 0 -account.2.dns_cache_naptr.0.replace = -account.2.dns_cache_naptr.0.service = -account.2.dns_cache_naptr.0.ttl = 300 - -account.2.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.2.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.2.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.2.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.2.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.2.srv_ttl_timer_enable = -account.2.proxy_require = - - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.2.register_mac = -account.2.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.2.reg_fail_retry_interval = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.2.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} - -#Configure the STUN server address. -account.2.nat.stun_server = {$stun_server} - -#Configure the STUN server port, the default value is 3478. -account.2.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.2.nat.udp_update_enable = 1 - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.2.nat.udp_update_time = 30 - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.2.nat.rport = {$yealink_rport} - - -####################################################################################### -## Account2 Advance Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.2.advanced.timer_t1 = 0.5 -account.2.advanced.timer_t2 = 4 -account.2.advanced.timer_t4 = 5 - -voice_mail.number.2 = *97 - - -####################################################################################### -## Subscribe ## -####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = - -account.2.subscribe_mwi = 1 -account.2.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.2.subscribe_mwi_to_vm = 1 - -account.2.subscribe_acd_expires= 3600 - - -####################################################################################### -## BLF List ## -####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.2.blf.blf_list_uri = - -account.2.blf_list_code = -account.2.blf_list_barge_in_code = -account.2.blf.subscribe_period = 1800 - -account.2.blf.subscribe_event = -account.2.out_dialog_blf_enable = 0 - - -####################################################################################### -## BLA/SCA ## -####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_2) } -account.2.shared_line = {$shared_line_2} -{else} -account.2.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.2.bla_number = -account.2.bla_subscribe_period = 300 - -####################################################################################### -## Audio Codec ## -####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.2.codec.Y.enable = -#The type of the specified codec. -#account.2.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.2.codec.Y.priority = -#The payload of the specified codec. -#account.2.codec.Y.rtpmap = - -account.2.codec.1.enable = 1 -account.2.codec.1.payload_type = PCMU -account.2.codec.1.priority = 2 -account.2.codec.1.rtpmap = 0 - -account.2.codec.2.enable = 1 -account.2.codec.2.payload_type = PCMA -account.2.codec.2.priority = 3 -account.2.codec.2.rtpmap = 8 - -account.2.codec.3.enable = 0 -account.2.codec.3.payload_type = G723_53 -account.2.codec.3.priority =0 -account.2.codec.3.rtpmap = 4 - -account.2.codec.4.enable = 0 -account.2.codec.4.payload_type = G723_63 -account.2.codec.4.priority = 0 -account.2.codec.4.rtpmap = 4 - -account.2.codec.5.enable = 1 -account.2.codec.5.payload_type = G729 -account.2.codec.5.priority = 3 -account.2.codec.5.rtpmap = 18 - -account.2.codec.6.enable = 1 -account.2.codec.6.payload_type = G722 -account.2.codec.6.priority = 1 -account.2.codec.6.rtpmap = 9 - -account.2.codec.7.enable = 0 -account.2.codec.7.payload_type = iLBC -account.2.codec.7.priority = 0 -account.2.codec.7.rtpmap = 106 - -account.2.codec.8.enable = 0 -account.2.codec.8.payload_type = G726-16 -account.2.codec.8.priority = 0 -account.2.codec.8.rtpmap = 103 - -account.2.codec.9.enable = 0 -account.2.codec.9.payload_type = G726-24 -account.2.codec.9.priority = 0 -account.2.codec.9.rtpmap = 104 - -account.2.codec.10.enable = 0 -account.2.codec.10.payload_type = G726-32 -account.2.codec.10.priority = 0 -account.2.codec.10.rtpmap = 102 - -account.2.codec.11.enable = 0 -account.2.codec.11.payload_type = G726-40 -account.2.codec.11.priority = 0 -account.2.codec.11.rtpmap = 105 - -account.2.codec.12.enable = 0 -account.2.codec.12.payload_type = GSM -account.2.codec.12.priority = 0 -account.2.codec.12.rtpmap = 3 - - -####################################################################################### -## Audio Advanced ## -####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.2.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.2.ptime = - - -####################################################################################### -## Anonymous Call ## -####################################################################################### -account.2.anonymous_call = 0 -account.2.anonymous_call_oncode = -account.2.anonymous_call_offcode = - -account.2.reject_anonymous_call = -account.2.anonymous_reject_oncode = -account.2.anonymous_reject_offcode = - -####################################################################################### -## Pickup Code ## -####################################################################################### -account.2.dialoginfo_callpickup = 0 - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.2.group_pickup_code = -account.2.direct_pickup_code = - -####################################################################################### -## DTMF ## -####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.2.dtmf.type = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.2.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.2.dtmf.dtmf_payload = - -####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.2.alert_info_url_enable = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav -account.2.ringtone.ring_type = - -account.2.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.2.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.2.conf_uri = - -####################################################################################### -## cid source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.2.cid_source = {$yealink_cid_source} - -account.2.cid_source_privacy = 1 -account.2.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.2.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.2.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.2.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.2.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.2.music_on_hold_type = - -account.2.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.2.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.2.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.2.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.2.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.2.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.2.dnd.enable = -account.2.dnd.on_code = -account.2.dnd.off_code = - -####################################################################################### -## Call Forward ## -####################################################################################### -#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; -account.2.always_fwd.enable = -account.2.always_fwd.target = -account.2.always_fwd.off_code = -account.2.always_fwd.on_code = - -account.2.busy_fwd.enable = -account.2.busy_fwd.target = -account.2.busy_fwd.off_code = -account.2.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.2.timeout_fwd.enable = -account.2.timeout_fwd.target = -account.2.timeout_fwd.timeout = -account.2.timeout_fwd.off_code = -account.2.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## -####################################################################################### -account.2.hoteling.enable = 0 -account.2.hoteling.user_id = 0 -account.2.hoteling.password = 0 -account.2.hoteling.auto_login_enable = 0 - -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.2.acd.enable = 0 -account.2.acd.unavailable_reason_enable = 0 -account.2.acd.available = 0 -account.2.acd.initial_state = 1 - -####################################################################################### -## Broadsoft ACD Call Center ## -####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.2.bw_acd_reason_code.Y = 500(lunch time) -account.2.bw_acd_reason_code.1 = - -account.2.reason_code.1 = -account.2.reason_code_name.1 = 0 -account.2.bw_disp_code.1 = -account.2.bw_disp_code_name.1 = -account.2.supervisor_info_code.1 = -account.2.supervisor_info_code_name.1 = - -####################################################################################### -## Broadsoft Call Center ## -####################################################################################### -account.2.call_center.call_info_enable = 0 -account.2.call_center.show_call_info_time = 30 -account.2.call_center.disp_code_enable = 0 -account.2.call_center.trace_enable = 0 -account.2.call_center.emergency_enable = 0 -account.2.call_center.queue_status_enable = 0 -account.2.call_center.queue_status_light_enable = 0 - -####################################################################################### -## Broadsoft XSI ## -####################################################################################### -account.2.xsi.user = -account.2.xsi.password = -account.2.xsi.host = -account.2.xsi.server_type = -account.2.xsi.port = - - -####################################################################################### -## Time ## -####################################################################################### -#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. -#local_time.time_zone = +8 -#local_time.time_zone_name = China(Beijing) -local_time.time_zone = {$yealink_time_zone} -local_time.time_zone_name = {$yealink_time_zone_name} - - -####################################################################################### -## NETWORK ## -####################################################################################### -##0-ipv4, 1-ipv6, 2-ipv4&ipv6 -network.ip_address_mode = 2 - -network.ipv6_prefix = 64 -network.ipv6_internet_port.type = -network.ipv6_internet_port.ip = -network.ipv6_internet_port.gateway = -network.ipv6_primary_dns = -network.ipv6_secondary_dns = -network.ipv6_icmp_v6.enable = - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -{if isset($dns_server_primary)} -network.primary_dns = {$dns_server_primary} -{/if} -{if isset($dns_server_secondary)} -network.secondary_dns = {$dns_server_secondary} -{/if} -{if isset($dns_server_primary)} -network.static_dns_enable = 1 -{else}network.static_dns_enable = 0 -{/if} - -####################################################################################### -## Account 3 Basic Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.enable = -{if isset($user_password_3) } -account.3.enable = 1 -{else} -account.3.enable = 0 -{/if} -account.3.label = {$display_name_3} -account.3.display_name = {$display_name_3} -account.3.auth_name = {$auth_id_3} -account.3.password = {$user_password_3} -account.3.user_name = {$user_id_3} -account.3.sip_server_host = {$server_address_3} -account.3.sip_server_port = {$sip_port_3} -account.3.outbound_host = {$outbound_proxy_3} -account.3.outbound_port = 5060 -account.3.sip_listen_port = 5060 -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} -{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} -{if $sip_transport_3 == 'tls'}account.3.transport = 2{/if} -{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} - -account.3.outbound_proxy.1.address = {$outbound_proxy_primary_3} -account.3.outbound_proxy.2.address = {$outbound_proxy_secondary_3} -account.3.outbound_proxy_enable = {if isset($outbound_proxy_primary_3)}1{else}0{/if} - -####################################################################################### -## Failback ## -####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 - -account.3.reregister_enable = 0 -account.3.retry_counts = -account.3.failback_mode = 0 -account.3.failback_timeout = 3600 -account.3.naptr_build = 0 -account.3.fallback.redundancy_type = 0 -account.3.fallback.timeout = 120 -account.3.sip_server.1.address = -account.3.sip_server.1.port = 5060 -#Configure the register expiry time (in seconds), the default value is 3600. -account.3.sip_server.1.expires = {$register_expires_3} -account.3.sip_server.1.retry_counts = 3 -account.3.sip_server.1.failback_mode = 0 -account.3.sip_server.1.failback_timeout = 3600 -account.3.sip_server.1.register_on_enable = 0 -account.3.sip_server.2.address = -account.3.sip_server.2.port = 5060 -account.3.sip_server.2.expires = 3600 -account.3.sip_server.2.retry_counts = 3 -account.3.sip_server.2.failback_mode = 0 -account.3.sip_server.2.failback_timeout = 3600 -account.3.sip_server.2.register_on_enable = 0 -account.3.dns_cache_type = 1 - -account.3.dns_cache_a.1.name = -account.3.dns_cache_a.1.ip = -account.3.dns_cache_a.1.ttl = 300 - -account.3.dns_cache_srv.0.name = -account.3.dns_cache_srv.0.port = 0 -account.3.dns_cache_srv.0.priority = 0 -account.3.dns_cache_srv.0.target = -account.3.dns_cache_srv.0.weight = 0 -account.3.dns_cache_srv.0.ttl = 300 -account.3.dns_cache_naptr.0.name = -account.3.dns_cache_naptr.0.flags = -account.3.dns_cache_naptr.0.order = 0 -account.3.dns_cache_naptr.0.preference = 0 -account.3.dns_cache_naptr.0.replace = -account.3.dns_cache_naptr.0.service = -account.3.dns_cache_naptr.0.ttl = 300 - -account.3.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.3.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.3.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.3.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.3.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.3.srv_ttl_timer_enable = -account.3.proxy_require = - - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.3.register_mac = -account.3.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.3.reg_fail_retry_interval = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} - -#Configure the STUN server address. -account.3.nat.stun_server = {$stun_server} - -#Configure the STUN server port, the default value is 3478. -account.3.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.3.nat.udp_update_enable = 1 - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.3.nat.udp_update_time = 30 - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.3.nat.rport = {$yealink_rport} - - -####################################################################################### -## Account3 Advance Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.3.advanced.timer_t1 = 0.5 -account.3.advanced.timer_t2 = 4 -account.3.advanced.timer_t4 = 5 - -voice_mail.number.3 = *97 - - -####################################################################################### -## Subscribe ## -####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = - -account.3.subscribe_mwi = 1 -account.3.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.3.subscribe_mwi_to_vm = 1 - -account.3.subscribe_acd_expires= 3600 - - -####################################################################################### -## BLF List ## -####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.3.blf.blf_list_uri = - -account.3.blf_list_code = -account.3.blf_list_barge_in_code = -account.3.blf.subscribe_period = 1800 - -account.3.blf.subscribe_event = -account.3.out_dialog_blf_enable = 0 - - -####################################################################################### -## BLA/SCA ## -####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_3) } -account.3.shared_line = {$shared_line_3} -{else} -account.3.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.3.bla_number = -account.3.bla_subscribe_period = 300 - -####################################################################################### -## Audio Codec ## -####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.3.codec.Y.enable = -#The type of the specified codec. -#account.3.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.3.codec.Y.priority = -#The payload of the specified codec. -#account.3.codec.Y.rtpmap = - -account.3.codec.1.enable = 1 -account.3.codec.1.payload_type = PCMU -account.3.codec.1.priority = 2 -account.3.codec.1.rtpmap = 0 - -account.3.codec.2.enable = 1 -account.3.codec.2.payload_type = PCMA -account.3.codec.2.priority = 3 -account.3.codec.2.rtpmap = 8 - -account.3.codec.3.enable = 0 -account.3.codec.3.payload_type = G723_53 -account.3.codec.3.priority =0 -account.3.codec.3.rtpmap = 4 - -account.3.codec.4.enable = 0 -account.3.codec.4.payload_type = G723_63 -account.3.codec.4.priority = 0 -account.3.codec.4.rtpmap = 4 - -account.3.codec.5.enable = 1 -account.3.codec.5.payload_type = G729 -account.3.codec.5.priority = 3 -account.3.codec.5.rtpmap = 18 - -account.3.codec.6.enable = 1 -account.3.codec.6.payload_type = G722 -account.3.codec.6.priority = 1 -account.3.codec.6.rtpmap = 9 - -account.3.codec.7.enable = 0 -account.3.codec.7.payload_type = iLBC -account.3.codec.7.priority = 0 -account.3.codec.7.rtpmap = 106 - -account.3.codec.8.enable = 0 -account.3.codec.8.payload_type = G726-16 -account.3.codec.8.priority = 0 -account.3.codec.8.rtpmap = 103 - -account.3.codec.9.enable = 0 -account.3.codec.9.payload_type = G726-24 -account.3.codec.9.priority = 0 -account.3.codec.9.rtpmap = 104 - -account.3.codec.10.enable = 0 -account.3.codec.10.payload_type = G726-32 -account.3.codec.10.priority = 0 -account.3.codec.10.rtpmap = 102 - -account.3.codec.11.enable = 0 -account.3.codec.11.payload_type = G726-40 -account.3.codec.11.priority = 0 -account.3.codec.11.rtpmap = 105 - -account.3.codec.12.enable = 0 -account.3.codec.12.payload_type = GSM -account.3.codec.12.priority = 0 -account.3.codec.12.rtpmap = 3 - - -####################################################################################### -## Audio Advanced ## -####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.3.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.3.ptime = - - -####################################################################################### -## Anonymous Call ## -####################################################################################### -account.3.anonymous_call = 0 -account.3.anonymous_call_oncode = -account.3.anonymous_call_offcode = - -account.3.reject_anonymous_call = -account.3.anonymous_reject_oncode = -account.3.anonymous_reject_offcode = - -####################################################################################### -## Pickup Code ## -####################################################################################### -account.3.dialoginfo_callpickup = 0 - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.3.group_pickup_code = -account.3.direct_pickup_code = - -####################################################################################### -## DTMF ## -####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.3.dtmf.type = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.3.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.3.dtmf.dtmf_payload = - -####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.3.alert_info_url_enable = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav -account.3.ringtone.ring_type = - -account.3.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.3.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.3.conf_uri = - -####################################################################################### -## cid source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.3.cid_source = {$yealink_cid_source} - -account.3.cid_source_privacy = 1 -account.3.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.3.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.3.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.3.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.3.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.3.music_on_hold_type = - -account.3.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.3.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.3.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.3.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.3.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.3.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.3.dnd.enable = -account.3.dnd.on_code = -account.3.dnd.off_code = - -####################################################################################### -## Call Forward ## -####################################################################################### -#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; -account.3.always_fwd.enable = -account.3.always_fwd.target = -account.3.always_fwd.off_code = -account.3.always_fwd.on_code = - -account.3.busy_fwd.enable = -account.3.busy_fwd.target = -account.3.busy_fwd.off_code = -account.3.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.3.timeout_fwd.enable = -account.3.timeout_fwd.target = -account.3.timeout_fwd.timeout = -account.3.timeout_fwd.off_code = -account.3.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## -####################################################################################### -account.3.hoteling.enable = 0 -account.3.hoteling.user_id = 0 -account.3.hoteling.password = 0 -account.3.hoteling.auto_login_enable = 0 - -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.3.acd.enable = 0 -account.3.acd.unavailable_reason_enable = 0 -account.3.acd.available = 0 -account.3.acd.initial_state = 1 - -####################################################################################### -## Broadsoft ACD Call Center ## -####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.3.bw_acd_reason_code.Y = 500(lunch time) -account.3.bw_acd_reason_code.1 = - -account.3.reason_code.1 = -account.3.reason_code_name.1 = 0 -account.3.bw_disp_code.1 = -account.3.bw_disp_code_name.1 = -account.3.supervisor_info_code.1 = -account.3.supervisor_info_code_name.1 = - -####################################################################################### -## Broadsoft Call Center ## -####################################################################################### -account.3.call_center.call_info_enable = 0 -account.3.call_center.show_call_info_time = 30 -account.3.call_center.disp_code_enable = 0 -account.3.call_center.trace_enable = 0 -account.3.call_center.emergency_enable = 0 -account.3.call_center.queue_status_enable = 0 -account.3.call_center.queue_status_light_enable = 0 - -####################################################################################### -## Broadsoft XSI ## -####################################################################################### -account.3.xsi.user = -account.3.xsi.password = -account.3.xsi.host = -account.3.xsi.server_type = -account.3.xsi.port = - - -####################################################################################### -## NETWORK ## -####################################################################################### -##0-ipv4, 1-ipv6, 2-ipv4&ipv6 -network.ip_address_mode = 2 - -network.ipv6_prefix = 64 -network.ipv6_internet_port.type = -network.ipv6_internet_port.ip = -network.ipv6_internet_port.gateway = -network.ipv6_primary_dns = -network.ipv6_secondary_dns = -network.ipv6_icmp_v6.enable = - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if} -{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if} - -####################################################################################### -## Account 4 Basic Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.enable = -{if isset($user_password_4) } -account.4.enable = 1 -{else} -account.4.enable = 0 -{/if} -account.4.label = {$display_name_4} -account.4.display_name = {$display_name_4} -account.4.auth_name = {$auth_id_4} -account.4.password = {$user_password_4} -account.4.user_name = {$user_id_4} -account.4.sip_server_host = {$server_address_4} -account.4.sip_server_port = {$sip_port_4} -account.4.outbound_host = {$outbound_proxy_4} -account.4.outbound_port = 5060 -account.4.sip_listen_port = 5060 -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_4 == 'udp'}account.4.transport = 0{/if} -{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} -{if $sip_transport_4 == 'tls'}account.4.transport = 2{/if} -{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} - -account.4.outbound_proxy.1.address = {$outbound_proxy_primary_4} -account.4.outbound_proxy.2.address = {$outbound_proxy_secondary_4} -account.4.outbound_proxy_enable = {if isset($outbound_proxy_primary_4)}1{else}0{/if} - -####################################################################################### -## Failback ## -####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 - -account.4.reregister_enable = 0 -account.4.retry_counts = -account.4.failback_mode = 0 -account.4.failback_timeout = 3600 -account.4.naptr_build = 0 -account.4.fallback.redundancy_type = 0 -account.4.fallback.timeout = 120 -account.4.sip_server.1.address = -account.4.sip_server.1.port = 5060 -#Configure the register expiry time (in seconds), the default value is 3600. -account.4.sip_server.1.expires = {$register_expires_4} -account.4.sip_server.1.retry_counts = 3 -account.4.sip_server.1.failback_mode = 0 -account.4.sip_server.1.failback_timeout = 3600 -account.4.sip_server.1.register_on_enable = 0 -account.4.sip_server.2.address = -account.4.sip_server.2.port = 5060 -account.4.sip_server.2.expires = 3600 -account.4.sip_server.2.retry_counts = 3 -account.4.sip_server.2.failback_mode = 0 -account.4.sip_server.2.failback_timeout = 3600 -account.4.sip_server.2.register_on_enable = 0 -account.4.dns_cache_type = 1 - -account.4.dns_cache_a.1.name = -account.4.dns_cache_a.1.ip = -account.4.dns_cache_a.1.ttl = 300 - -account.4.dns_cache_srv.1.name = -account.4.dns_cache_srv.1.port = 0 -account.4.dns_cache_srv.1.priority = 0 -account.4.dns_cache_srv.1.target = -account.4.dns_cache_srv.1.weight = 0 -account.4.dns_cache_srv.1.ttl = 300 -account.4.dns_cache_naptr.1.name = -account.4.dns_cache_naptr.1.flags = -account.4.dns_cache_naptr.1.order = 0 -account.4.dns_cache_naptr.1.preference = 0 -account.4.dns_cache_naptr.1.replace = -account.4.dns_cache_naptr.1.service = -account.4.dns_cache_naptr.1.ttl = 300 - -account.4.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.4.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.4.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.4.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.4.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.4.srv_ttl_timer_enable = -account.4.proxy_require = - - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.4.register_mac = -account.4.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.4.reg_fail_retry_interval = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} - -#Configure the STUN server address. -account.4.nat.stun_server = {$stun_server} - -#Configure the STUN server port, the default value is 3478. -account.4.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.4.nat.udp_update_enable = 1 - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.4.nat.udp_update_time = 30 - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.4.nat.rport = {$yealink_rport} - - -####################################################################################### -## Account4 Advance Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.4.advanced.timer_t1 = 0.5 -account.4.advanced.timer_t2 = 4 -account.4.advanced.timer_t4 = 5 - -voice_mail.number.4 = *97 - - -####################################################################################### -## Subscribe ## -####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = - -account.4.subscribe_mwi = 1 -account.4.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.4.subscribe_mwi_to_vm = 1 - -account.4.subscribe_acd_expires= 3600 - - -####################################################################################### -## BLF List ## -####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.4.blf.blf_list_uri = - -account.4.blf_list_code = -account.4.blf_list_barge_in_code = -account.4.blf.subscribe_period = 1800 - -account.4.blf.subscribe_event = -account.4.out_dialog_blf_enable = 0 - - -####################################################################################### -## BLA/SCA ## -####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_4) } -account.4.shared_line = {$shared_line_4} -{else} -account.4.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.4.bla_number = -account.4.bla_subscribe_period = 300 - -####################################################################################### -## Audio Codec ## -####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.4.codec.Y.enable = -#The type of the specified codec. -#account.4.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.4.codec.Y.priority = -#The payload of the specified codec. -#account.4.codec.Y.rtpmap = - -account.4.codec.1.enable = 1 -account.4.codec.1.payload_type = PCMU -account.4.codec.1.priority = 1 -account.4.codec.1.rtpmap = 0 - -account.4.codec.2.enable = 1 -account.4.codec.2.payload_type = PCMA -account.4.codec.2.priority = 2 -account.4.codec.2.rtpmap = 8 - -account.4.codec.3.enable = 0 -account.4.codec.3.payload_type = G723_53 -account.4.codec.3.priority =0 -account.4.codec.3.rtpmap = 4 - -account.4.codec.4.enable = 0 -account.4.codec.4.payload_type = G723_63 -account.4.codec.4.priority = 0 -account.4.codec.4.rtpmap = 4 - -account.4.codec.5.enable = 1 -account.4.codec.5.payload_type = G729 -account.4.codec.5.priority = 3 -account.4.codec.5.rtpmap = 18 - -account.4.codec.6.enable = 1 -account.4.codec.6.payload_type = G722 -account.4.codec.6.priority = 4 -account.4.codec.6.rtpmap = 9 - -account.4.codec.7.enable = 0 -account.4.codec.7.payload_type = iLBC -account.4.codec.7.priority = 0 -account.4.codec.7.rtpmap = 106 - -account.4.codec.8.enable = 0 -account.4.codec.8.payload_type = G726-16 -account.4.codec.8.priority = 0 -account.4.codec.8.rtpmap = 103 - -account.4.codec.9.enable = 0 -account.4.codec.9.payload_type = G726-24 -account.4.codec.9.priority = 0 -account.4.codec.9.rtpmap = 104 - -account.4.codec.10.enable = 0 -account.4.codec.10.payload_type = G726-32 -account.4.codec.10.priority = 0 -account.4.codec.10.rtpmap = 102 - -account.4.codec.11.enable = 0 -account.4.codec.11.payload_type = G726-40 -account.4.codec.11.priority = 0 -account.4.codec.11.rtpmap = 105 - -account.4.codec.12.enable = 0 -account.4.codec.12.payload_type = GSM -account.4.codec.12.priority = 0 -account.4.codec.12.rtpmap = 3 - - -####################################################################################### -## Audio Advanced ## -####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.4.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.4.ptime = - - -####################################################################################### -## Anonymous Call ## -####################################################################################### -account.4.anonymous_call = 0 -account.4.anonymous_call_oncode = -account.4.anonymous_call_offcode = - -account.4.reject_anonymous_call = -account.4.anonymous_reject_oncode = -account.4.anonymous_reject_offcode = - -####################################################################################### -## Pickup Code ## -####################################################################################### -account.4.dialoginfo_callpickup = 0 - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.4.group_pickup_code = -account.4.direct_pickup_code = - -####################################################################################### -## DTMF ## -####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.4.dtmf.type = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.4.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.4.dtmf.dtmf_payload = - -####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.4.alert_info_url_enable = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav -account.4.ringtone.ring_type = - -account.4.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.4.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.4.conf_uri = - -####################################################################################### -## cid source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.4.cid_source = {$yealink_cid_source} - -account.4.cid_source_privacy = 1 -account.4.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.4.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.4.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.4.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.4.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.4.music_on_hold_type = - -account.4.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.4.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.4.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.4.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.4.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.4.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.4.dnd.enable = -account.4.dnd.on_code = -account.4.dnd.off_code = - -####################################################################################### -## Call Forward ## -####################################################################################### -#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; -account.4.always_fwd.enable = -account.4.always_fwd.target = -account.4.always_fwd.off_code = -account.4.always_fwd.on_code = - -account.4.busy_fwd.enable = -account.4.busy_fwd.target = -account.4.busy_fwd.off_code = -account.4.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.4.timeout_fwd.enable = -account.4.timeout_fwd.target = -account.4.timeout_fwd.timeout = -account.4.timeout_fwd.off_code = -account.4.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## -####################################################################################### -account.4.hoteling.enable = 0 -account.4.hoteling.user_id = 0 -account.4.hoteling.password = 0 -account.4.hoteling.auto_login_enable = 0 - -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.4.acd.enable = 0 -account.4.acd.unavailable_reason_enable = 0 -account.4.acd.available = 0 -account.4.acd.initial_state = 1 - -####################################################################################### -## Broadsoft ACD Call Center ## -####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.4.bw_acd_reason_code.Y = 500(lunch time) -account.4.bw_acd_reason_code.1 = - -account.4.reason_code.1 = -account.4.reason_code_name.1 = 0 -account.4.bw_disp_code.1 = -account.4.bw_disp_code_name.1 = -account.4.supervisor_info_code.1 = -account.4.supervisor_info_code_name.1 = - -####################################################################################### -## Broadsoft Call Center ## -####################################################################################### -account.4.call_center.call_info_enable = 0 -account.4.call_center.show_call_info_time = 30 -account.4.call_center.disp_code_enable = 0 -account.4.call_center.trace_enable = 0 -account.4.call_center.emergency_enable = 0 -account.4.call_center.queue_status_enable = 0 -account.4.call_center.queue_status_light_enable = 0 - -####################################################################################### -## Broadsoft XSI ## -####################################################################################### -account.4.xsi.user = -account.4.xsi.password = -account.4.xsi.host = -account.4.xsi.server_type = -account.4.xsi.port = - - -####################################################################################### -## NETWORK ## -####################################################################################### -##0-ipv4, 1-ipv6, 2-ipv4&ipv6 -network.ip_address_mode = 2 - -network.ipv6_prefix = 64 -network.ipv6_internet_port.type = -network.ipv6_internet_port.ip = -network.ipv6_internet_port.gateway = -network.ipv6_primary_dns = -network.ipv6_secondary_dns = -network.ipv6_icmp_v6.enable = - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if} -{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if} - -####################################################################################### -## Account 5 Basic Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.enable = -{if isset($user_password_5) } -account.5.enable = 1 -{else} -account.5.enable = 0 -{/if} -account.5.label = {$display_name_5} -account.5.display_name = {$display_name_5} -account.5.auth_name = {$auth_id_5} -account.5.password = {$user_password_5} -account.5.user_name = {$user_id_5} -account.5.sip_server_host = {$server_address_5} -account.5.sip_server_port = {$sip_port_5} -account.5.outbound_host = {$outbound_proxy_5} -account.5.outbound_port = 5060 -account.5.sip_listen_port = 5060 -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_5 == 'udp'}account.5.transport = 0{/if} -{if $sip_transport_5 == 'tcp'}account.5.transport = 1{/if} -{if $sip_transport_5 == 'tls'}account.5.transport = 2{/if} -{if $sip_transport_5 == 'dns srv'}account.5.transport = 3{/if} - -account.5.outbound_proxy.1.address = {$outbound_proxy_primary_5} -account.5.outbound_proxy.2.address = {$outbound_proxy_secondary_5} -account.5.outbound_proxy_enable = {if isset($outbound_proxy_primary_5)}1{else}0{/if} - -####################################################################################### -## Failback ## -####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 - -account.5.reregister_enable = 0 -account.5.retry_counts = -account.5.failback_mode = 0 -account.5.failback_timeout = 3600 -account.5.naptr_build = 0 -account.5.fallback.redundancy_type = 0 -account.5.fallback.timeout = 120 -account.5.sip_server.1.address = -account.5.sip_server.1.port = 5060 -#Configure the register expiry time (in seconds), the default value is 3600. -account.5.sip_server.1.expires = {$register_expires_5} -account.5.sip_server.1.retry_counts = 3 -account.5.sip_server.1.failback_mode = 0 -account.5.sip_server.1.failback_timeout = 3600 -account.5.sip_server.1.register_on_enable = 0 -account.5.sip_server.2.address = -account.5.sip_server.2.port = 5060 -account.5.sip_server.2.expires = 3600 -account.5.sip_server.2.retry_counts = 3 -account.5.sip_server.2.failback_mode = 0 -account.5.sip_server.2.failback_timeout = 3600 -account.5.sip_server.2.register_on_enable = 0 -account.5.dns_cache_type = 1 - -account.5.dns_cache_a.1.name = -account.5.dns_cache_a.1.ip = -account.5.dns_cache_a.1.ttl = 300 - -account.5.dns_cache_srv.1.name = -account.5.dns_cache_srv.1.port = 0 -account.5.dns_cache_srv.1.priority = 0 -account.5.dns_cache_srv.1.target = -account.5.dns_cache_srv.1.weight = 0 -account.5.dns_cache_srv.1.ttl = 300 -account.5.dns_cache_naptr.1.name = -account.5.dns_cache_naptr.1.flags = -account.5.dns_cache_naptr.1.order = 0 -account.5.dns_cache_naptr.1.preference = 0 -account.5.dns_cache_naptr.1.replace = -account.5.dns_cache_naptr.1.service = -account.5.dns_cache_naptr.1.ttl = 300 - -account.5.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.5.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.5.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.5.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.5.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.5.srv_ttl_timer_enable = -account.5.proxy_require = - - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.5.register_mac = -account.5.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.5.reg_fail_retry_interval = - -######################################################################### -## NAT Settings ## -######################################################################### - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.5.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if} - -#Configure the STUN server address. -account.5.nat.stun_server = {$stun_server} - -#Configure the STUN server port, the default value is 3478. -account.5.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if} - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.5.nat.udp_update_enable = 1 - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.5.nat.udp_update_time = 30 - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.5.nat.rport = {$yealink_rport} - - -####################################################################################### -## Account5 Advance Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.5.advanced.timer_t1 = 0.5 -account.5.advanced.timer_t2 = 4 -account.5.advanced.timer_t4 = 5 - -voice_mail.number.5 = *97 - - -####################################################################################### -## Subscribe ## -####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = - -account.5.subscribe_mwi = 1 -account.5.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.5.subscribe_mwi_to_vm = 1 - -account.5.subscribe_acd_expires= 3600 - - -####################################################################################### -## BLF List ## -####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.5.blf.blf_list_uri = - -account.5.blf_list_code = -account.5.blf_list_barge_in_code = -account.5.blf.subscribe_period = 1800 - -account.5.blf.subscribe_event = -account.5.out_dialog_blf_enable = 0 - - -####################################################################################### -## BLA/SCA ## -####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_5) } -account.5.shared_line = {$shared_line_5} -{else} -account.5.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.5.bla_number = -account.5.bla_subscribe_period = 300 - -####################################################################################### -## Audio Codec ## -####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.5.codec.Y.enable = -#The type of the specified codec. -#account.5.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.5.codec.Y.priority = -#The payload of the specified codec. -#account.5.codec.Y.rtpmap = - -account.5.codec.1.enable = 1 -account.5.codec.1.payload_type = PCMU -account.5.codec.1.priority = 1 -account.5.codec.1.rtpmap = 0 - -account.5.codec.2.enable = 1 -account.5.codec.2.payload_type = PCMA -account.5.codec.2.priority = 2 -account.5.codec.2.rtpmap = 8 - -account.5.codec.3.enable = 0 -account.5.codec.3.payload_type = G723_53 -account.5.codec.3.priority =0 -account.5.codec.3.rtpmap = 4 - -account.5.codec.4.enable = 0 -account.5.codec.4.payload_type = G723_63 -account.5.codec.4.priority = 0 -account.5.codec.4.rtpmap = 4 - -account.5.codec.5.enable = 1 -account.5.codec.5.payload_type = G729 -account.5.codec.5.priority = 3 -account.5.codec.5.rtpmap = 18 - -account.5.codec.6.enable = 1 -account.5.codec.6.payload_type = G722 -account.5.codec.6.priority = 4 -account.5.codec.6.rtpmap = 9 - -account.5.codec.7.enable = 0 -account.5.codec.7.payload_type = iLBC -account.5.codec.7.priority = 0 -account.5.codec.7.rtpmap = 106 - -account.5.codec.8.enable = 0 -account.5.codec.8.payload_type = G726-16 -account.5.codec.8.priority = 0 -account.5.codec.8.rtpmap = 103 - -account.5.codec.9.enable = 0 -account.5.codec.9.payload_type = G726-24 -account.5.codec.9.priority = 0 -account.5.codec.9.rtpmap = 104 - -account.5.codec.10.enable = 0 -account.5.codec.10.payload_type = G726-32 -account.5.codec.10.priority = 0 -account.5.codec.10.rtpmap = 102 - -account.5.codec.11.enable = 0 -account.5.codec.11.payload_type = G726-40 -account.5.codec.11.priority = 0 -account.5.codec.11.rtpmap = 105 - -account.5.codec.12.enable = 0 -account.5.codec.12.payload_type = GSM -account.5.codec.12.priority = 0 -account.5.codec.12.rtpmap = 3 - - -####################################################################################### -## Audio Advanced ## -####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.5.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.5.ptime = - - -####################################################################################### -## Anonymous Call ## -####################################################################################### -account.5.anonymous_call = 0 -account.5.anonymous_call_oncode = -account.5.anonymous_call_offcode = - -account.5.reject_anonymous_call = -account.5.anonymous_reject_oncode = -account.5.anonymous_reject_offcode = - -####################################################################################### -## Pickup Code ## -####################################################################################### -account.5.dialoginfo_callpickup = 0 - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.5.group_pickup_code = -account.5.direct_pickup_code = - -####################################################################################### -## DTMF ## -####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.5.dtmf.type = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.5.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.5.dtmf.dtmf_payload = - -####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.5.alert_info_url_enable = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav -account.5.ringtone.ring_type = - -account.5.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.5.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.5.conf_uri = - -####################################################################################### -## cid source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.5.cid_source = {$yealink_cid_source} - -account.5.cid_source_privacy = 1 -account.5.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.5.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.5.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.5.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.5.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.5.music_on_hold_type = - -account.5.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.5.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.5.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.5.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.5.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.5.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.5.dnd.enable = -account.5.dnd.on_code = -account.5.dnd.off_code = - -####################################################################################### -## Call Forward ## -####################################################################################### -#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; -account.5.always_fwd.enable = -account.5.always_fwd.target = -account.5.always_fwd.off_code = -account.5.always_fwd.on_code = - -account.5.busy_fwd.enable = -account.5.busy_fwd.target = -account.5.busy_fwd.off_code = -account.5.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.5.timeout_fwd.enable = -account.5.timeout_fwd.target = -account.5.timeout_fwd.timeout = -account.5.timeout_fwd.off_code = -account.5.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## -####################################################################################### -account.5.hoteling.enable = 0 -account.5.hoteling.user_id = 0 -account.5.hoteling.password = 0 -account.5.hoteling.auto_login_enable = 0 - -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.5.acd.enable = 0 -account.5.acd.unavailable_reason_enable = 0 -account.5.acd.available = 0 -account.5.acd.initial_state = 1 - -####################################################################################### -## Broadsoft ACD Call Center ## -####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.5.bw_acd_reason_code.Y = 500(lunch time) -account.5.bw_acd_reason_code.1 = - -account.5.reason_code.1 = -account.5.reason_code_name.1 = 0 -account.5.bw_disp_code.1 = -account.5.bw_disp_code_name.1 = -account.5.supervisor_info_code.1 = -account.5.supervisor_info_code_name.1 = - -####################################################################################### -## Broadsoft Call Center ## -####################################################################################### -account.5.call_center.call_info_enable = 0 -account.5.call_center.show_call_info_time = 30 -account.5.call_center.disp_code_enable = 0 -account.5.call_center.trace_enable = 0 -account.5.call_center.emergency_enable = 0 -account.5.call_center.queue_status_enable = 0 -account.5.call_center.queue_status_light_enable = 0 - -####################################################################################### -## Broadsoft XSI ## -####################################################################################### -account.5.xsi.user = -account.5.xsi.password = -account.5.xsi.host = -account.5.xsi.server_type = -account.5.xsi.port = - - -####################################################################################### -## NETWORK ## -####################################################################################### -##0-ipv4, 1-ipv6, 2-ipv4&ipv6 -network.ip_address_mode = 2 - -network.ipv6_prefix = 64 -network.ipv6_internet_port.type = -network.ipv6_internet_port.ip = -network.ipv6_internet_port.gateway = -network.ipv6_primary_dns = -network.ipv6_secondary_dns = -network.ipv6_icmp_v6.enable = - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if} -{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if} - -####################################################################################### -## Account 6 Basic Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.enable = -{if isset($user_password_6) } -account.6.enable = 1 -{else} -account.6.enable = 0 -{/if} -account.6.label = {$display_name_6} -account.6.display_name = {$display_name_6} -account.6.auth_name = {$auth_id_6} -account.6.password = {$user_password_6} -account.6.user_name = {$user_id_6} -account.6.sip_server_host = {$server_address_6} -account.6.sip_server_port = {$sip_port_6} -account.6.outbound_host = {$outbound_proxy_6} -account.6.outbound_port = 5060 -account.6.sip_listen_port = 5060 -#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; -{if $sip_transport_6 == 'udp'}account.6.transport = 0{/if} -{if $sip_transport_6 == 'tcp'}account.6.transport = 1{/if} -{if $sip_transport_6 == 'tls'}account.6.transport = 2{/if} -{if $sip_transport_6 == 'dns srv'}account.6.transport = 3{/if} - -account.6.outbound_proxy.1.address = {$outbound_proxy_primary_6} -account.6.outbound_proxy.2.address = {$outbound_proxy_secondary_6} -account.6.outbound_proxy_enable = {if isset($outbound_proxy_primary_6)}1{else}0{/if} - -####################################################################################### -## Failback ## -####################################################################################### -## ranges from 1 to 6; -##account.X.reregister_enable = 0 - -account.6.reregister_enable = 0 -account.6.retry_counts = -account.6.failback_mode = 0 -account.6.failback_timeout = 3600 -account.6.naptr_build = 0 -account.6.fallback.redundancy_type = 0 -account.6.fallback.timeout = 120 -account.6.sip_server.1.address = -account.6.sip_server.1.port = 5060 -#Configure the register expiry time (in seconds), the default value is 3600. -account.6.sip_server.1.expires = {$register_expires_6} -account.6.sip_server.1.retry_counts = 3 -account.6.sip_server.1.failback_mode = 0 -account.6.sip_server.1.failback_timeout = 3600 -account.6.sip_server.1.register_on_enable = 0 -account.6.sip_server.2.address = -account.6.sip_server.2.port = 5060 -account.6.sip_server.2.expires = 3600 -account.6.sip_server.2.retry_counts = 3 -account.6.sip_server.2.failback_mode = 0 -account.6.sip_server.2.failback_timeout = 3600 -account.6.sip_server.2.register_on_enable = 0 -account.6.dns_cache_type = 1 - -account.6.dns_cache_a.1.name = -account.6.dns_cache_a.1.ip = -account.6.dns_cache_a.1.ttl = 300 - -account.6.dns_cache_srv.1.name = -account.6.dns_cache_srv.1.port = 0 -account.6.dns_cache_srv.1.priority = 0 -account.6.dns_cache_srv.1.target = -account.6.dns_cache_srv.1.weight = 0 -account.6.dns_cache_srv.1.ttl = 300 -account.6.dns_cache_naptr.1.name = -account.6.dns_cache_naptr.1.flags = -account.6.dns_cache_naptr.1.order = 0 -account.6.dns_cache_naptr.1.preference = 0 -account.6.dns_cache_naptr.1.replace = -account.6.dns_cache_naptr.1.service = -account.6.dns_cache_naptr.1.ttl = 300 - -account.6.static_cache_pri = 0 - -####################################################################################### -## Register Advanced ## -####################################################################################### -## ranges from 1 to 6; -##account.X.sip_server_type = - -#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom; -account.6.sip_server_type = -#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled; -account.6.unregister_on_reboot = - -#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled; -account.6.sip_trust_ctrl = 1 - -#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8. -account.6.dns_query_timeout= - -#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled; -account.6.srv_ttl_timer_enable = -account.6.proxy_require = - - -#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; -account.6.register_mac = -account.6.register_line = - -#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30. -account.6.reg_fail_retry_interval = - -######################################################################### -## NAT Settings ## -######################################################################### -## ranges from 1 to 6; -##account.X.nat.nat_traversal = 0 - -#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; -account.6.nat.nat_traversal = 0 - -account.6.nat.stun_server = -account.6.nat.stun_port = 3478 - -#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; -account.6.nat.udp_update_enable = 1 - -#Specify the keep-alive interval (in seconds), the default value is 30. -account.6.nat.udp_update_time = 30 - -#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; -account.6.nat.rport = {$yealink_rport} - - -####################################################################################### -## Account6 Advance Settings ## -####################################################################################### -## ranges from 1 to 6; -##account.X.advanced.timer_t1 = 0.5 -##voice_mail.number.X = - -#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5. -account.6.advanced.timer_t1 = 0.5 -account.6.advanced.timer_t2 = 4 -account.6.advanced.timer_t4 = 5 - -voice_mail.number.6 = *97 - - -####################################################################################### -## Subscribe ## -####################################################################################### -## ranges from 1 to 6; -##account.X.subscribe_mwi = - -account.6.subscribe_mwi = 0 -account.6.subscribe_mwi_expires = 3600 - -#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; -account.6.subscribe_mwi_to_vm = 0 - -account.6.subscribe_acd_expires= 3600 - - -####################################################################################### -## BLF List ## -####################################################################################### -## ranges from 1 to 6; -##account.X.blf.blf_list_uri = - -#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". -account.6.blf.blf_list_uri = - -account.6.blf_list_code = -account.6.blf_list_barge_in_code = -account.6.blf.subscribe_period = 1800 - -account.6.blf.subscribe_event = -account.6.out_dialog_blf_enable = 0 - - -####################################################################################### -## BLA/SCA ## -####################################################################################### -## ranges from 1 to 6; -##account.X.shared_line = - -#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA; -{if isset($shared_line_6) } -account.6.shared_line = {$shared_line_6} -{else} -account.6.shared_line = 0 -{/if} - -#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. -account.6.bla_number = -account.6.bla_subscribe_period = 300 - -####################################################################################### -## Audio Codec ## -####################################################################################### -#Audio codecs for account1 (Y ranges from 1 to 11). -#Enable or disable the specified codec; 0-Disabled, 1-Enabled; -#account.6.codec.Y.enable = -#The type of the specified codec. -#account.6.codec.Y.payload_type = -#The priority of the specified codec. It's available when the codec is enabled. -#account.6.codec.Y.priority = -#The payload of the specified codec. -#account.6.codec.Y.rtpmap = - -account.6.codec.1.enable = 1 -account.6.codec.1.payload_type = PCMU -account.6.codec.1.priority = 1 -account.6.codec.1.rtpmap = 0 - -account.6.codec.2.enable = 1 -account.6.codec.2.payload_type = PCMA -account.6.codec.2.priority = 2 -account.6.codec.2.rtpmap = 8 - -account.6.codec.3.enable = 0 -account.6.codec.3.payload_type = G723_53 -account.6.codec.3.priority =0 -account.6.codec.3.rtpmap = 4 - -account.6.codec.4.enable = 0 -account.6.codec.4.payload_type = G723_63 -account.6.codec.4.priority = 0 -account.6.codec.4.rtpmap = 4 - -account.6.codec.5.enable = 1 -account.6.codec.5.payload_type = G729 -account.6.codec.5.priority = 3 -account.6.codec.5.rtpmap = 18 - -account.6.codec.6.enable = 1 -account.6.codec.6.payload_type = G722 -account.6.codec.6.priority = 4 -account.6.codec.6.rtpmap = 9 - -account.6.codec.7.enable = 0 -account.6.codec.7.payload_type = iLBC -account.6.codec.7.priority = 0 -account.6.codec.7.rtpmap = 106 - -account.6.codec.8.enable = 0 -account.6.codec.8.payload_type = G726-16 -account.6.codec.8.priority = 0 -account.6.codec.8.rtpmap = 103 - -account.6.codec.9.enable = 0 -account.6.codec.9.payload_type = G726-24 -account.6.codec.9.priority = 0 -account.6.codec.9.rtpmap = 104 - -account.6.codec.10.enable = 0 -account.6.codec.10.payload_type = G726-32 -account.6.codec.10.priority = 0 -account.6.codec.10.rtpmap = 102 - -account.6.codec.11.enable = 0 -account.6.codec.11.payload_type = G726-40 -account.6.codec.11.priority = 0 -account.6.codec.11.rtpmap = 105 - -account.6.codec.12.enable = 0 -account.6.codec.12.payload_type = GSM -account.6.codec.12.priority = 0 -account.6.codec.12.rtpmap = 3 - - -####################################################################################### -## Audio Advanced ## -####################################################################################### -#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated; -account.6.srtp_encryption = - -#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. -account.6.ptime = - - -####################################################################################### -## Anonymous Call ## -####################################################################################### -account.6.anonymous_call = 0 -account.6.anonymous_call_oncode = -account.6.anonymous_call_offcode = - -account.6.reject_anonymous_call = -account.6.anonymous_reject_oncode = -account.6.anonymous_reject_offcode = - -####################################################################################### -## Pickup Code ## -####################################################################################### -account.5.dialoginfo_callpickup = 0 - -#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone. -account.6.group_pickup_code = -account.56.direct_pickup_code = - -####################################################################################### -## DTMF ## -####################################################################################### -#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; -account.6.dtmf.type = - -#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event; -account.6.dtmf.info_type = - -#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101. -account.6.dtmf.dtmf_payload = - -####################################################################################### -## Alert info ## -####################################################################################### -#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default); -account.6.alert_info_url_enable = - -#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav. -#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav -#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav -account.6.ringtone.ring_type = - -account.6.picture_info_enable = 1 - -####################################################################################### -## Conference ## -####################################################################################### -#Configure the conference type; 0-Local (default), 2-Network Conference; -account.6.conf_type = - -#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". -account.6.conf_uri = - -####################################################################################### -## cid source ## -####################################################################################### -#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM; -account.6.cid_source = {$yealink_cid_source} - -account.6.cid_source_privacy = 1 -account.6.cid_source_ppi = 1 - -#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; -account.6.cp_source = 2 - -####################################################################################### -## Session Timer ## -####################################################################################### -#Enable or disable the session timer, 0-Disabled (default), 1-Enabled; -account.6.session_timer.enable = {$yealink_session_timer} - -#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. -account.6.session_timer.expires = - -#Configure the session timer refresher; 0-Uac (default), 1-Uas; -account.6.session_timer.refresher = - -####################################################################################### -## Music on Hold ## -####################################################################################### -#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server; -#Require reboot; -account.6.music_on_hold_type = - -account.6.music_server_uri = - -####################################################################################### -## Advanced ## -####################################################################################### -#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; -account.6.auto_answer = - -#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); -account.6.missed_calllog = - -#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; -account.6.100rel_enable = {$yealink_retransmission} - -#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; -account.6.enable_user_equal_phone = - -#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default); -account.6.compact_header_enable = - -####################################################################################### -## DND ## -####################################################################################### -account.6.dnd.enable = -account.6.dnd.on_code = -account.6.dnd.off_code = - -####################################################################################### -## Call Forward ## ####################################################################################### -#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled; -account.6.always_fwd.enable = -account.6.always_fwd.target = -account.6.always_fwd.off_code = -account.6.always_fwd.on_code = - -account.6.busy_fwd.enable = -account.6.busy_fwd.target = -account.6.busy_fwd.off_code = -account.6.busy_fwd.on_code = - -#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled; -#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2. -account.6.timeout_fwd.enable = -account.6.timeout_fwd.target = -account.6.timeout_fwd.timeout = -account.6.timeout_fwd.off_code = -account.6.timeout_fwd.on_code = - -####################################################################################### -## Broadsoft Hoteling ## +## Network Conferene ## ####################################################################################### -account.6.hoteling.enable = 0 -account.6.hoteling.user_id = 0 -account.6.hoteling.password = 0 -account.6.hoteling.auto_login_enable = 0 +account.1.conf_uri= -####################################################################################### -## Broadsoft ACD ## -####################################################################################### -account.6.acd.enable = 0 -account.6.acd.unavailable_reason_enable = 0 -account.6.acd.available = 0 -account.6.acd.initial_state = 1 ####################################################################################### -## Broadsoft ACD Call Center ## +## Broadsoft Call Decline ## ####################################################################################### -#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.) -#account.6.bw_acd_reason_code.Y = 500(lunch time) -account.6.bw_acd_reason_code.1 = +account.1.features.call_decline.enable = -account.6.reason_code.1 = -account.6.reason_code_name.1 = 0 -account.6.bw_disp_code.1 = -account.6.bw_disp_code_name.1 = -account.6.supervisor_info_code.1 = -account.6.supervisor_info_code_name.1 = ####################################################################################### -## Broadsoft Call Center ## +## Broadsoft Security Classification ## ####################################################################################### -account.6.call_center.call_info_enable = 0 -account.6.call_center.show_call_info_time = 30 -account.6.call_center.disp_code_enable = 0 -account.6.call_center.trace_enable = 0 -account.6.call_center.emergency_enable = 0 -account.6.call_center.queue_status_enable = 0 -account.6.call_center.queue_status_light_enable = 0 +account.1.security_classification.enable = -####################################################################################### -## Broadsoft XSI ## -####################################################################################### -account.6.xsi.user = -account.6.xsi.password = -account.6.xsi.host = -account.6.xsi.server_type = -account.6.xsi.port = ####################################################################################### -## NETWORK ## +## Broadsoft Flexible Seating ## ####################################################################################### -##0-ipv4, 1-ipv6, 2-ipv4&ipv6 -network.ip_address_mode = 2 +account.1.flexible_seating.enable= +account.1.hoteling.pin= +account.1.hoteling.mode= -network.ipv6_prefix = 64 -network.ipv6_internet_port.type = -network.ipv6_internet_port.ip = -network.ipv6_internet_port.gateway = -network.ipv6_primary_dns = -network.ipv6_secondary_dns = -network.ipv6_icmp_v6.enable = - -#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address; -#Require reboot; -network.internet_port.type = - -#Configure the static IP address, subnet mask, gateway and DNS server; -#Require Reboot; -network.internet_port.ip = -network.internet_port.mask = -network.internet_port.gateway = -{if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if} -{if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if} -{if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if} ####################################################################################### -## Line Key ## +## Features Sync ## ####################################################################################### - -#The x of the parameter "linekey.x.line" ranges from 1 to 6. -#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. -#linekey.x.lable--Define the label for each line key. Meet-Me Conference "1" or BLF "16" require pick_value. - -{foreach $keys['line'] as $row} -#Configure Line Key {$row.device_key_id} -linekey.{$row.device_key_id}.line = {$row.device_key_line} -linekey.{$row.device_key_id}.value = {$row.device_key_value} -{if $row.device_key_type == "1" || $row.device_key_type == "16"} -linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} -{else} -linekey.{$row.device_key_id}.extension = {$row.device_key_extension} -{/if} -linekey.{$row.device_key_id}.type = {$row.device_key_type} -linekey.{$row.device_key_id}.xml_phonebook = -linekey.{$row.device_key_id}.label = {$row.device_key_label} - -{/foreach} - +account.1.features.forward.feature_key_sync.local_processing.enable= +account.1.features.dnd.feature_key_sync.local_processing.enable = ####################################################################################### -## Memory Key (For T38G only) ## +## ACD ## ####################################################################################### -#X ranges from 1 to 10; -#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. -#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. -#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. -#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. -#memorykey.x.extension--Enter the pickup code, this parameter is only appilicable to BLF. -#memorykey.x.type--Assign the desired feature to the memory key. -#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS -# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL -# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser -# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group -#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. -#memorykey.x.sub_type = - -{foreach $keys["memory"] as $row} -#Expansion Memory Key {$row.device_key_id} -memorykey.{$row.device_key_id}.type = {$row.device_key_type} -memorykey.{$row.device_key_id}.line = {$row.device_key_line} -memorykey.{$row.device_key_id}.value = {$row.device_key_value} -memorykey.{$row.device_key_id}.extension = {$row.device_key_extension} -memorykey.{$row.device_key_id}.label = {$row.device_key_label} -memorykey.{$row.device_key_id}.xml_phonebook = -memorykey.{$row.device_key_id}.sub_type = - -{/foreach} - - -########################################################################################## -## Programmable Key (For T38G only) ## -########################################################################################## -#X ranges from 1 to 15. -#programablekey.x.type--Customize the programmable key type. -#The valid types are: -#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom -#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook -#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock -#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. -#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. -#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. - -{foreach $keys["programmable"] as $row} -programablekey.{$row.device_key_id}.type = {$row.device_key_type} -programablekey.{$row.device_key_id}.line = {$row.device_key_line} -programablekey.{$row.device_key_id}.value = {$row.device_key_value} -programablekey.{$row.device_key_id}.xml_phonebook = -programablekey.{$row.device_key_id}.history_type = -programablekey.{$row.device_key_id}.label = {$row.device_key_label} - -{/foreach} - -#programablekey.x.value = -#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. -#programablekey.x.history_type = - -#programablekey.x.label--This parameter is only available to the key 1 to key 4. - -#History -#programablekey.1.type = 28 -#programablekey.1.line = 1 -#programablekey.1.value = -#programablekey.1.xml_phonebook = -#programablekey.1.history_type = -#programablekey.1.label = - -#Directory -#programablekey.2.type = 29 -#programablekey.2.line = 1 -#programablekey.2.value = -#programablekey.2.xml_phonebook = -#programablekey.2.history_type = -#programablekey.2.label = - -#DND -programablekey.3.type = 5 -programablekey.3.line = 1 -programablekey.3.value = -programablekey.3.xml_phonebook = -programablekey.3.history_type = -programablekey.3.label = - -#Menu -#programablekey.4.type = 30 -#programablekey.4.line = -#programablekey.4.value = -#programablekey.4.xml_phonebook = -#programablekey.4.history_type = -#programablekey.4.label = - -########################################################################################## -## Expansion Module 1 ## -########################################################################################## -#X ranges from 1 to 16, Y ranges from 1 to 40. -#expansion_module.x.key.y.type = 37 (Switch by default) -#expansion_module.x.key.y.line = 0 -#expansion_module.x.key.y.value = -#expansion_module.x.key.y.extension = -#expansion_module.x.key.y.label = -#expansion_module.X.key.Y.xml_phonebook = - -{$rownum = 1} - -{foreach $keys["expansion"] as $row} -{if $rownum <= 40} -expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type} -expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line} -expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value} -expansion_module.1.key.{$row.device_key_id}.extension = {$row.device_key_extension} -expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label} -expansion_module.1.key.{$row.device_key_id}.xml_phonebook = -{else} -expansion_module.2.key.{$row.device_key_id - 40}.type = {$row.device_key_type} -expansion_module.2.key.{$row.device_key_id - 40}.line = {$row.device_key_line} -expansion_module.2.key.{$row.device_key_id - 40}.value = {$row.device_key_value} -expansion_module.2.key.{$row.device_key_id - 40}.extension = {$row.device_key_extension} -expansion_module.2.key.{$row.device_key_id - 40}.label = {$row.device_key_label} -expansion_module.2.key.{$row.device_key_id - 40}.xml_phonebook = -{/if} -{$rownum = $rownum + 1} - -{/foreach} - -########################################################################################## -## Expansion Module 2 ## -########################################################################################## - -#Expansion module 2 key 1 -#expansion_module.2.key.1.type = -#expansion_module.2.key.1.line = -#expansion_module.2.key.1.value = -#expansion_module.2.key.1.extension = -#expansion_module.2.key.1.label = -#expansion_module.2.key.1.xml_phonebook = -#expansion_module.2.key.1.type = -#expansion_module.2.key.1.label = +account.1.acd.available_url= +account.1.acd.away_url = +account.1.acd.refresh_url = +account.1.acd.call_information=