diff --git a/resources/templates/provision/yealink/t21p/y000000000052.cfg b/resources/templates/provision/yealink/t21p/y000000000052.cfg index aa5bcd3736..62f732e738 100644 --- a/resources/templates/provision/yealink/t21p/y000000000052.cfg +++ b/resources/templates/provision/yealink/t21p/y000000000052.cfg @@ -41,15 +41,15 @@ network.pc_port.dhcp_server = 1 ####################################################################################### ## VLAN ## ####################################################################################### -network.vlan.internet_port_enable = 0 +{if isset($yealink_vlan_enable)}network.vlan.internet_port_enable = {$yealink_vlan_enable}{else}network.vlan.internet_port_enable = 0{/if} #Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. #Require reboot; -network.vlan.internet_port_vid = +network.vlan.internet_port_vid = {$yealink_vlan_id} -#Configure the VLAN priority, it ranges from 0 (default) to 7. -#Require reboot; -network.vlan.internet_port_priority = +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = {$yealink_vlan_cos} #Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled; #Require reboot; @@ -297,7 +297,7 @@ watch_dog.enable = sip.use_23_as_pound = #Enable or disable the RFC2543 Hold feature; 0-Disabled (default), 1-Enabled; -sip.rfc2543_hold = +sip.rfc2543_hold = {$yealink_rfc2543_hold} #Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); sip.use_out_bound_in_dialog = @@ -402,7 +402,7 @@ lang.wui = lang.gui = English ####################################################################################### -## Time ## +## Time Settings ## ####################################################################################### #Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. @@ -417,13 +417,13 @@ local_time.ntp_server1 = {$ntp_server_primary} local_time.ntp_server2 = {$ntp_server_secondary} #Configure the update interval (in seconds) when using the NTP server. The default value is 1000. -local_time.interval = +local_time.interval = {$yealink_time_update} -#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); -local_time.summer_time = +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = {$yealink_dst_enable} #Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; -local_time.dst_time_type = +local_time.dst_time_type = {$yealink_dst_type} #Configure the start time of DST. The default value is 1/1/0. #If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. @@ -447,7 +447,7 @@ local_time.date_format = {$yealink_date_format} local_time.dhcp_time = {$yealink_dhcp_time} #Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0. -local_time.manual_time_enable = +local_time.manual_time_enable = 0 ####################################################################################### ## Auto Redial ## @@ -638,8 +638,11 @@ features.group_listen_in_talking_enable = features.call_completion_enable = #Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default); -features.direct_ip_call_enable = 0 -sip.trust_ctrl=1 +features.direct_ip_call_enable = {$yealink_direct_ip_call_enable} +sip.trust_ctrl = {$yealink_trust_ctrl} + +#It enables or disables the IP phone to display the feature name instead of the feature access code when dialing and in talk;(0-Disabled;1-Enabled) +features.hide_feature_access_codes.enable = {$yealink_hide_feature_access_codes_enable} #Configure the power Indicator LED to turn on or turn off; 0-On (default), 1-Off; features.power_led_on = 1 @@ -658,6 +661,12 @@ features.idle_talk_power_led_flash_enable = #Enbale or disable the server to release the BLA line automatically; 0-Disabled (default), 1-Enabled; features.auto_release_bla_line = +#It enables or disables the IP phone to display the pop-up message box when it receives a new voice mail. +features.voice_mail_popup.enable = {$yealink_voice_mail_popup_enable} + +#It enables or disables the IP phone to display the pop-up message box when it misses a call. +features.missed_call_popup.enable = {$yealink_missed_call_popup_enable} + ####################################################################################### ## Features FWD ## @@ -673,8 +682,8 @@ features.fwd_diversion_enable = ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = -features.dnd.on_code = -features.dnd.off_code = +features.dnd.on_code = *78 +features.dnd.off_code = *79 features.dnd.emergency_enable = 1 features.dnd.emergency_authorized_number = @@ -682,7 +691,7 @@ features.dnd.emergency_authorized_number = ## Features BLF ## ####################################################################################### #Configure the LED flashing mode of the BLF key (line key). The value is 0(default) or 1. -features.blf_led_mode = +features.blf_led_mode = {$yealink_blf_led_mode} features.blf_list_version = 0 features.blf_and_callpark_idle_led_enable = 0 @@ -831,6 +840,15 @@ features.pickup.blf_audio_enable = ####################################################################################### ## Phone Setting ## ####################################################################################### +#Enable or disable the photo display on handset 0 = disable, 1= enable +phone_setting.contact_photo_display.enable = 0 + +#Enable or disable the called party information display 0 = disable 1 = enable +phone_setting.called_party_info_display.enable = 1 + +#Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info +phone_setting.call_info_display_method = 0 + #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = @@ -849,7 +867,7 @@ phone_setting.show_code403 = phone_setting.dialnow_delay = #Configure the emergency number, each separated by a comma. The default value is 112,911,110. -phone_setting.emergency.number = +phone_setting.emergency.number = {$yealink_emergency_number} #Configure the using mode of the headset key. The value is 0 or 1(default). phone_setting.page_tip = @@ -869,8 +887,8 @@ phone_setting.headsetkey_mode = #Enable or disabled mail power led flash. 0-Disabled, 1-Enabled. phone_setting.mail_power_led_flash_enable = 1 -#Disable missed call power led flash 0-Disabled, 1-Enabled -phone_setting.missed_call_power_led_flash.enable = 0 +#It enables or disables the power indicator LED to flash when the IP phone misses a call. +phone_setting.missed_call_power_led_flash.enable = {$yealink_missed_call_power_led_flash_enable} ####################################################################################### ## Phone Setting UI ## @@ -892,21 +910,21 @@ phone_setting.blf_list_sequence_type = ####################################################################################### ## Key Lock ## ####################################################################################### + #Configure the keypad lock type; 0-Disabled (default), 1-Enable -phone_setting.lock = +phone_setting.lock = {$yealink_lock_enable} #Configure the unlock password for the phone. The default value is 123. -phone_setting.phone_lock.unlock_pin = - +phone_setting.phone_lock.unlock_pin = {$yealink_lock_pin} #Configures the interval (in seconds) to automatically lock the IP phone. It ranges from 0 to 3600, the default value is 0. -phone_setting.phone_lock.lock_time_out = +phone_setting.phone_lock.lock_time_out = {$yealink_lock_timeout} #Configure the keypad lock type;0-All Keys(default), 1-Function Key, 2-Menu Key -phone_setting.phone_lock.lock_key_type = +phone_setting.phone_lock.lock_key_type = {$yealink_lock_key_type} #Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s. -phone_setting.backlight_time = +phone_setting.backlight_time = {$yealink_backlight_time} ####################################################################################### ## Wallpaper ## @@ -1151,7 +1169,6 @@ linekey.20.type = linekey.20.xml_phonebook = linekey.20.label = - linekey.21.line = linekey.21.value = linekey.21.extension = @@ -1159,7 +1176,6 @@ linekey.21.type = linekey.21.xml_phonebook = linekey.21.label = - linekey.22.line = linekey.22.value = linekey.22.extension = @@ -1202,7 +1218,7 @@ linekey.27.type = linekey.27.xml_phonebook = linekey.27.label = ####################################################################################### -## Programablekey ## +## Programable key ## ####################################################################################### #X ranges from 1 to 13. #programablekey.x.type--Customize the programmable key type. @@ -1220,13 +1236,13 @@ linekey.27.label = #programablekey.x.history_type = #programablekey.x.label--This parameter is only available to the key 1 to key 4. -programablekey.1.type = -programablekey.1.line = -programablekey.1.value = -programablekey.1.xml_phonebook = -programablekey.1.history_type = -programablekey.1.label = -programablekey.1.pickup_value = +#programablekey.1.type = +#programablekey.1.line = +#programablekey.1.value = +#programablekey.1.xml_phonebook = +#programablekey.1.history_type = +#programablekey.1.label = +#programablekey.1.pickup_value = ########################################################################################## ## Expansion Key ## @@ -1467,7 +1483,7 @@ server_certificates.delete = ## Contact ## ####################################################################################### #Before using these parameters, you should store the desired resource files to the provisioning server. -#For more information, refer to Yealink SIP-T21P IP Phone Family Administrator Guide. +#For more information, refer to Yealink SIP-T21p IP Phone Family Administrator Guide. local_contact.data.url = #######################################################################################