From c99272a15b2c9985fca62d31dafdbd8799537e4c Mon Sep 17 00:00:00 2001 From: Mark Crane Date: Fri, 7 Feb 2014 11:02:22 +0000 Subject: [PATCH] Add the Yealink w52p. --- .../provision/yealink/w52p/y000000000025.cfg | 458 +++++++ .../provision/yealink/w52p/{$mac}.cfg | 1206 +++++++++++++++++ 2 files changed, 1664 insertions(+) create mode 100644 resources/templates/provision/yealink/w52p/y000000000025.cfg create mode 100644 resources/templates/provision/yealink/w52p/{$mac}.cfg diff --git a/resources/templates/provision/yealink/w52p/y000000000025.cfg b/resources/templates/provision/yealink/w52p/y000000000025.cfg new file mode 100644 index 0000000000..b892b780dc --- /dev/null +++ b/resources/templates/provision/yealink/w52p/y000000000025.cfg @@ -0,0 +1,458 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Network ## +####################################################################################### + + +#Configure the username and password for PPPOE connection. +#Require reboot; +network.pppoe.user = +network.pppoe.password = + +#Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled; +#Require reboot; +network.vlan.internet_port_enable = 0 + +#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1. +#Require reboot; +network.vlan.internet_port_vid = + +#Configure the VLAN priority, it ranges from 0 (default) to 7. +#Require reboot; +network.vlan.internet_port_priority = + +#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default); +#Require reboot; +network.vlan.dhcp_enable = + +#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255. +#Multiple options separated by a comma. It supports up to 5 options in all. +#Require reboot; +network.vlan.dhcp_option = + +#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535. +#Require reboot; +network.port.http = +network.port.https = + +#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 12780. +#Require reboot; +network.port.max_rtpport = + +#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780. +#Require reboot; +network.port.min_rtpport = + +#Configure the voice QOS. It ranges from 0 to 63, the default value is 40. +#Require reboot; +network.qos.rtptos = + +#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26. +#Require reboot; +network.qos.signaltos = + +#Configure the 802.1x mode; 0-Disabled (default), 1-Enabled (EAP-MD5); +#Require reboot; +network.802_1x.mode = + +#Configure the username and password for 802.1x authentication. +#Require reboot; +network.802_1x.identity = +network.802_1x.md5_password = + +#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.vpn_enable = + +#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default); +#Require reboot; +network.lldp.enable = + +#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60. +#Require reboot; +network.lldp.packet_interval = + +####################################################################################### +## Syslog Server ## +####################################################################################### + +#Configure the syslog mode; 0-Local, 1-Server,the default value is 0; +#Require reboot; +syslog.mode = + +#Configure the IP address of the syslog server; +#Require reboot; +syslog.server = + +#Configure the syslog level. It ranges from 0 to 6, the default value is 3. +#Require reboot; +syslog.log_level = + +####################################################################################### +## Auto Provisioning ## +####################################################################################### + +#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled(default); +auto_provision.pnp_enable = 1 + +#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default); +auto_provision.mode = 1 + +#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled; +auto_provision.repeat.enable = 1 + +#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440. +auto_provision.repeat.minutes = + +#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled; +auto_provision.weekly.enalbe = + +#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly. +auto_provision.weekly.mask = +auto_provision.weekly.begin_time = +auto_provision.weekly.end_time = + +#Configure the URL of the auto provisioning server. +auto_provision.server.url = http://{$server_address_1} + +#Configure the username and password for downloading. +auto_provision.server.username = +auto_provision.server.password = + +#Configure the domain name of the PNP server. +auto_provision.pnp_domain_name = + +#Configure the PNP vendor information. +auto_provision.pnp_event_vendor = + +#Configure the name of the Common configuration file. +auto_provision.common_file_name = + +#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default); +auto_provision.dhcp_enable = + +#Configure the value (manufacturer of the device) of DHCP option 60. +auto_provision.dhcp_option.option60_value = + +#Configure the custom DHCP option number. It ranges from 128 to 254. +auto_provision.dhcp_option.list_user_options = + +#Configure AES key (16 characters) for decrypting the common CFG file. +auto_provision.aes_key_16.com = + +#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file. +auto_provision.aes_key_16.mac = + +####################################################################################### +## Phone Features ## +####################################################################################### + +#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default); +sip.use_out_bound_in_dialog = + +#Configure the registration random time (in seconds). It ranges from 0 (default) to 60. +sip.reg_surge_prevention = + +#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call; +#0-Disabled, 1-Enabled (default); +transfer.semi_attend_tran_enable = + +#Enable or disable the phone to complete the blind or attended transfer through on-hook; +#0-Disabled (default), 1-Enabled; +transfer.blind_tran_on_hook_enable = +transfer.on_hook_trans_enable = + +#Enable or disable to access the web user interface of phone using the http/https protocol; +#0-Disabled,1-Enabled (default); +#Require Reboot; +wui.https_enable = +wui.http_enable = + +#Enable or disable the feature key synchronization, 0-Disabled (default), 1-Enabled; +bw.feature_key_sync = + +####################################################################################### +## Security Settings ## +####################################################################################### + +#Enable or disable the phone to only accept the certificates in the Trusted Certificates list; +#0-Disabled, 1-Enabled (default); +security.trust_certificates = + +#Set the password of the user or the administrator, the value format is: user:password or admin:password; +#security.user_password = admin:admin +security.user_password = + +base.pin_code = + +####################################################################################### +## Language Settings ## +####################################################################################### + +#Specify the web language, the valid values are: English, Chinese_S, German, Italian and Turkish; +lang.wui = + +####################################################################################### +## Time Settings ## +####################################################################################### + +#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8. +#The default time zone name is China(Beijing). +#local_time.time_zone = +8 +#local_time.time_zone_name = China(Beijing) +local_time.time_zone = -7 +local_time.time_zone_name = + +#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org. +local_time.ntp_server1 = +local_time.ntp_server2 = + +#Configure the update interval (in seconds) when using the NTP server. The default value is 1000. +local_time.interval = + +#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default); +local_time.summer_time = 0 + +#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week; +local_time.dst_time_type = + +#Configure the start time of DST. The default value is 1/1/0. +#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20. +#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day. +#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January. +local_time.start_time = + +#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time. +local_time.end_time = + +#Configure the offset time (in minutes). It ranges from -300 to 300, the default value is 60. +local_time.offset_time = + +#Enable or disable the DHCP time, 0-Disabled (default), 1-Enabled; +local_time.dhcp_time = + +####################################################################################### +## Dial Plan ## +####################################################################################### + +#Configure the area code. +dialplan.area_code.code = +dialplan.area_code.min_len = 1 +dialplan.area_code.max_len = 15 + +#When applying the rule to multiple lines, each line ID separated by comma. +#e.g. dialplan.area_code.line_id = 1, 2, 3 +dialplan.area_code.line_id = + +#Configure the block out number. X ranges from 1 to 10. +#dialplan.block_out.number.x = +dialplan.block_out.number.1 = + +#When applying the rule to multiple lines, each line ID separated by comma, e.g. 1,2,3. +#dialplan.block_out.line_id.x = +dialplan.block_out.line_id.1 = + +#Configure the replace rule. X ranges from 1 to 10; +#dialplan.replace.prefix.x = +#dialplan.replace.replace.x = +#dialplan.replace.line_id.x = + +dialplan.replace.prefix.1 = +dialplan.replace.replace.1 = +dialplan.replace.line_id.1 = + +####################################################################################### +## Phone Settings ## +####################################################################################### + +#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here; +#features.dnd_refuse_code = 480 + +#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default). +features.normal_refuse_code = 486 + +account.X.dnd.on_code = +account.X.dnd.off_code = + +#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default); +call_waiting.enable = 1 + +#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default); +call_waiting.tone = + +#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default); +features.save_call_history = + +#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5. +features.relog_offtime = 5 + +#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default); +phone_setting.is_deal180 = 1 + +####################################################################################### +## Base_Upgrade ## +####################################################################################### +firmware.url = + +####################################################################################### +## Handset_upgrade ## +####################################################################################### + +over_the_air.url = +over_the_air.base_trigger = +over_the_air.handset_tip = + +####################################################################################### +## Certificates ## +####################################################################################### +trusted_certificates.url = + +#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates; +trusted_certificates.delete = + +server_certificates.url = + +#server_certificates.delete = http://localhost/all, delete the server certificate; +server_certificates.delete = + +####################################################################################### +## Local Contact/DST Time/Replace Rule ## +####################################################################################### +auto_dst.url = +dialplan_replace_rule.url = +blacklist.url = +handset.X.contact_list.url = + +####################################################################################### +## Customized Factory Configurations ## +####################################################################################### +#Configure the access URL for downloading the customized factory configurations; +custom_factory_configuration.url = + +####################################################################################### +## OpenVPN ## +####################################################################################### +#Configure the access URL for downloading the open VPN tar; +openvpn.url = + + +####################################################################################### +## Contacts ## +####################################################################################### +#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5. +remote_phonebook.data.X.url = +remote_phonebook.data.X.name = +directory.update_time_interval = 1440 + +#Network Phonebook +xsi.host = +xsi.user = +xsi.password = +bw_phonebook.group_enable = 1 +bw_phonebook.group_common_enable = 0 +bw_phonebook.enterprise_enable = 0 +bw_phonebook.enterprise_common_enable = 0 +bw_phonebook.personal_enable = 0 +bw_phonebook.update_interval = 1440 + +#Network Call Log +bw_phonebook.call_log_enable = 0 + + +####################################################################################### +## Tone ## +####################################################################################### +voice.tone.country = Custom +voice.tone.dial = +voice.tone.ring = +voice.tone.busy = +voice.tone.callwaiting = + + +####################################################################################### +## Number Assignment ## +####################################################################################### +#The line accept to incoming(1,2,3,4,5);X ranges from 1 to 5 +#handset.X.incoming_lines = 1,2,3,4 + +handset.1.incoming_lines = + +#The line accept to call out(1,2,3,4,5) +#handset.X.dial_out_lines = 1,2,5 +#handset.X.dial_out_default_line = 1 + +handset.1.dial_out_lines = +handset.1.dial_out_default_line = + +handset.1.name = + +####################################################################################### +## Auto Provisioning Code ## +####################################################################################### + +#This feature allows user to trigger the auto provisioning by pressing a predefined string on the phone. +#Require reboot; +#"X" ranges from 1 to 50 + +#Configure the auto provisioning name. +#The valid value is a string, the maximum length is 100. +#autoprovision.X.name = + +#Configure the auto provisioning code; +#The valid value is a string, the maximum length is 100. +#autoprovision.X.code = + +#Configure the URL of the auto provisioning server. +#The valid value is a string, the maximum length is 256. +#autoprovision.X.url = + +#Configure the username and password for downloading. +#The valid value is a string, the maximum length is 100. +#autoprovision.X.user = +#autoprovision.X.password = + +#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file. +#autoprovision.X.com_aes = +#autoprovision.X.mac_aes = + +autoprovision.1.name = +autoprovision.1.code = +autoprovision.1.url = +autoprovision.1.user = +autoprovision.1.password = +autoprovision.1.com_aes = +autoprovision.1.mac_aes = + + +####################################################################################### +## TR069 ## +####################################################################################### +#The TR069 feature is only applicable to some designated firmware version. +#All settings of TR069 require reboot. +#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled; + +managementserver.enable = +managementserver.username = +managementserver.password = +managementserver.url = +managementserver.periodic_inform_enable = +managementserver.periodic_inform_interval = +managementserver.connection_request_username = +managementserver.connection_request_password = + + +####################################################################################### +## SNMP ## +####################################################################################### +#Enable or disable the SNMP feature; 0-Disabled (default), 1-Enabled; +#Require reboot; +network.snmp.enable = +network.snmp.port = + +#Configure the IP address(es) of the trusted SNMP server,multiple IP addresses must be separated by a space. +#Require reboot; +network.snmp.trust_ip = + diff --git a/resources/templates/provision/yealink/w52p/{$mac}.cfg b/resources/templates/provision/yealink/w52p/{$mac}.cfg new file mode 100644 index 0000000000..504be6286c --- /dev/null +++ b/resources/templates/provision/yealink/w52p/{$mac}.cfg @@ -0,0 +1,1206 @@ +#!version:1.0.0.1 + +##File header "#!version:1.0.0.1" can not be edited or deleted.## + +####################################################################################### +## Account1 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.1.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.1.label = {$display_name_1} + +#Configure the display name of account 1. +account.1.display_name = {$display_name_1} + +#Configure the username and password for register authentication. +account.1.auth_name = {$user_id_1} +account.1.password = {$user_password_1} + +#Configure the register user name. +account.1.user_name = {$user_id_1} + +#Configure the SIP server address. +account.1.sip_server_host = {$server_address_1} + +#Specify the port for the SIP server. The default value is 5060. +account.1.sip_server_port = 5060 + +#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.1.outbound_proxy_enable = 1 + +#Specify the IP address or domain name of the outbound proxy server. +account.1.outbound_host = {$outbound_proxy_1} + +#Specify the server port, the default value is 5060. +account.1.outbound_port = 5060 + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +account.1.transport = + +#Configure the address of the backup outbound proxy server. +account.1.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.1.backup_outbound_port = + + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.1.anonymous_call_oncode = +account.1.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.1.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.1.anonymous_reject_oncode = +account.1.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.1.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.1.expires = + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.1.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.1.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.1.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.1.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.1.cid_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.1.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.1.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.1.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.1.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.1.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.1.ptime = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.1.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.1.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.1.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.1.reg_fail_retry_interval = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.1.enable_signal_encode = + +#Configure the key for encoding. +account.1.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.1.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.1.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.1.dtmf.info_type = + + +####################################################################################### +## NAT Settings ## +####################################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.1.nat.nat_traversal = + +#Configure the STUN server address. +account.1.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.1.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.1.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.1.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.1.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.1.advanced.timer_t1 = +account.1.advanced.timer_t2 = +account.1.advanced.timer_t4 = + +account.1.codec.1.enable = 1 +account.1.codec.1.payload_type = PCMU +account.1.codec.1.priority = 1 +account.1.codec.1.rtpmap = 0 + +account.1.codec.2.enable = 1 +account.1.codec.2.payload_type = PCMA +account.1.codec.2.priority = 2 +account.1.codec.2.rtpmap = 8 + +account.1.codec.3.enable = 0 +account.1.codec.3.payload_type = G723_53 +account.1.codec.3.priority =0 +account.1.codec.3.rtpmap = 4 + +account.1.codec.4.enable = 0 +account.1.codec.4.payload_type = G723_63 +account.1.codec.4.priority = 0 +account.1.codec.4.rtpmap = 4 + +account.1.codec.5.enable = 1 +account.1.codec.5.payload_type = G729 +account.1.codec.5.priority = 3 +account.1.codec.5.rtpmap = 18 + +account.1.codec.6.enable = 1 +account.1.codec.6.payload_type = G722 +account.1.codec.6.priority = 4 +account.1.codec.6.rtpmap = 9 + +account.1.codec.7.enable = 0 +account.1.codec.7.payload_type = G726-32 +account.1.codec.7.priority = 0 +account.1.codec.7.rtpmap = 2 + +account.1.codec.8.enable = 0 +account.1.codec.8.payload_type = iLBC_13_3 +account.1.codec.8.priority = 0 +account.1.codec.8.rtpmap = 97 + +account.1.codec.9.enable = 0 +account.1.codec.9.payload_type = iLBC_15_2 +account.1.codec.9.priority = 0 +account.1.codec.9.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +account.1.always_fwd.enable = + +#Configure the target phonenumber that the phone will forward the call to; +account.1.always_fwd.target = + +#Configure the on/off code for always forward; + + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +account.1.busy_fwd.enable = +account.1.busy_fwd.target = + + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +account.1.timeout_fwd.enable = +account.1.timeout_fwd.target = +account.1.timeout_fwd.timeout = + + +####################################################################################### +## DND ## +####################################################################################### + +#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. +features.dnd_mode = + +#Enable or disable the DND feautre for account1; 0-Disabled (default), 1-Enabled; +account.1.dnd.enable = + +#Configure the DND on code and off code for account1. + + +####################################################################################### +## Account2 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.2.enable = 1 + +#Configure the label displayed on the LCD screen for account 1. +account.2.label = {$display_name_2} + +#Configure the display name of account 1. +account.2.display_name = {$display_name_2} + +#Configure the username and password for register authentication. +account.2.auth_name = {$user_id_2} +account.2.password = {$user_password_2} + +#Configure the register user name. +account.2.user_name = {$user_id_2} + +#Configure the SIP server address. +account.2.sip_server_host = {$server_address_2} + +#Specify the port for the SIP server. The default value is 5060. +account.2.sip_server_port = 5060 + +#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.2.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.2.outbound_host = + +#Specify the server port, the default value is 5060. +account.2.outbound_port =5060 + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +account.2.transport = + +#Configure the address of the backup outbound proxy server. +account.2.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.2.backup_outbound_port = + + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.2.anonymous_call_oncode = +account.2.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.2.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.2.anonymous_reject_oncode = +account.2.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.2.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.2.expires = + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.2.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.2.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.2.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.2.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.2.cid_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.2.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.2.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.2.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.2.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.2.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.2.ptime = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.2.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.2.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.2.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.2.reg_fail_retry_interval = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.2.enable_signal_encode = + +#Configure the key for encoding. +account.2.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.2.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.2.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.2.dtmf.info_type = + + +####################################################################################### +## NAT Settings ## +####################################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.2.nat.nat_traversal = + +#Configure the STUN server address. +account.2.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.2.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.2.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.2.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.2.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.2.advanced.timer_t1 = +account.2.advanced.timer_t2 = +account.2.advanced.timer_t4 = + +account.2.codec.1.enable = 1 +account.2.codec.1.payload_type = PCMU +account.2.codec.1.priority = 1 +account.2.codec.1.rtpmap = 0 + +account.2.codec.2.enable = 1 +account.2.codec.2.payload_type = PCMA +account.2.codec.2.priority = 2 +account.2.codec.2.rtpmap = 8 + +account.2.codec.3.enable = 0 +account.2.codec.3.payload_type = G723_53 +account.2.codec.3.priority =0 +account.2.codec.3.rtpmap = 4 + +account.2.codec.4.enable = 0 +account.2.codec.4.payload_type = G723_63 +account.2.codec.4.priority = 0 +account.2.codec.4.rtpmap = 4 + +account.2.codec.5.enable = 1 +account.2.codec.5.payload_type = G729 +account.2.codec.5.priority = 3 +account.2.codec.5.rtpmap = 18 + +account.2.codec.6.enable = 1 +account.2.codec.6.payload_type = G722 +account.2.codec.6.priority = 4 +account.2.codec.6.rtpmap = 9 + +account.2.codec.7.enable = 0 +account.2.codec.7.payload_type = G726-32 +account.2.codec.7.priority = 0 +account.2.codec.7.rtpmap = 2 + +account.2.codec.8.enable = 0 +account.2.codec.8.payload_type = iLBC_13_3 +account.2.codec.8.priority = 0 +account.2.codec.8.rtpmap = 97 + +account.2.codec.9.enable = 0 +account.2.codec.9.payload_type = iLBC_15_2 +account.2.codec.9.priority = 0 +account.2.codec.9.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +account.2.always_fwd.enable = + +#Configure the target phonenumber that the phone will forward the call to; +account.2.always_fwd.target = + +#Configure the on/off code for always forward; + + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +account.2.busy_fwd.enable = +account.2.busy_fwd.target = + + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +account.2.timeout_fwd.enable = +account.2.timeout_fwd.target = +account.2.timeout_fwd.timeout = + + +####################################################################################### +## DND ## +####################################################################################### + +#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. +features.dnd_mode = + +#Enable or disable the DND feautre for account2; 0-Disabled (default), 1-Enabled; +account.2.dnd.enable = + +#Configure the DND on code and off code for account1. +## Account3 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.3.enable = + +#Configure the label displayed on the LCD screen for account 1. +account.3.label = + +#Configure the display name of account 1. +account.3.display_name = + +#Configure the username and password for register authentication. +account.3.auth_name = +account.3.password = + +#Configure the register user name. +account.3.user_name = + +#Configure the SIP server address. +account.3.sip_server_host = + +#Specify the port for the SIP server. The default value is 5060. +account.3.sip_server_port = + +#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.3.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.3.outbound_host = + +#Specify the server port, the default value is 5060. +account.3.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +account.3.transport = + +#Configure the address of the backup outbound proxy server. +account.3.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.3.backup_outbound_port = + + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.3.anonymous_call_oncode = +account.3.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.3.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.3.anonymous_reject_oncode = +account.3.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.3.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.3.expires = + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.3.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.3.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.3.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.3.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.3.cid_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.3.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.3.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.3.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.3.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.3.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.3.ptime = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.3.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.3.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.3.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.3.reg_fail_retry_interval = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.3.enable_signal_encode = + +#Configure the key for encoding. +account.3.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.3.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.3.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.3.dtmf.info_type = + + +####################################################################################### +## NAT Settings ## +####################################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.3.nat.nat_traversal = + +#Configure the STUN server address. +account.3.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.3.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.3.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.3.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.3.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.3.advanced.timer_t1 = +account.3.advanced.timer_t2 = +account.3.advanced.timer_t4 = + +account.3.codec.1.enable = 1 +account.3.codec.1.payload_type = PCMU +account.3.codec.1.priority = 1 +account.3.codec.1.rtpmap = 0 + +account.3.codec.2.enable = 1 +account.3.codec.2.payload_type = PCMA +account.3.codec.2.priority = 2 +account.3.codec.2.rtpmap = 8 + +account.3.codec.3.enable = 0 +account.3.codec.3.payload_type = G723_53 +account.3.codec.3.priority =0 +account.3.codec.3.rtpmap = 4 + +account.3.codec.4.enable = 0 +account.3.codec.4.payload_type = G723_63 +account.3.codec.4.priority = 0 +account.3.codec.4.rtpmap = 4 + +account.3.codec.5.enable = 1 +account.3.codec.5.payload_type = G729 +account.3.codec.5.priority = 3 +account.3.codec.5.rtpmap = 18 + +account.3.codec.6.enable = 1 +account.3.codec.6.payload_type = G722 +account.3.codec.6.priority = 4 +account.3.codec.6.rtpmap = 9 + +account.3.codec.7.enable = 0 +account.3.codec.7.payload_type = G726-32 +account.3.codec.7.priority = 0 +account.3.codec.7.rtpmap = 2 + +account.3.codec.8.enable = 0 +account.3.codec.8.payload_type = iLBC_13_3 +account.3.codec.8.priority = 0 +account.3.codec.8.rtpmap = 97 + +account.3.codec.9.enable = 0 +account.3.codec.9.payload_type = iLBC_15_2 +account.3.codec.9.priority = 0 +account.3.codec.9.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +account.3.always_fwd.enable = + +#Configure the target phonenumber that the phone will forward the call to; +account.3.always_fwd.target = + +#Configure the on/off code for always forward; + + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +account.3.busy_fwd.enable = +account.3.busy_fwd.target = + + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +account.3.timeout_fwd.enable = +account.3.timeout_fwd.target = +account.3.timeout_fwd.timeout = + + +####################################################################################### +## DND ## +####################################################################################### + +#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. +features.dnd_mode = + +#Enable or disable the DND feautre for account3; 0-Disabled (default), 1-Enabled; +account.3.dnd.enable = + +#Configure the DND on code and off code for account3. + +## Account4 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.4.enable = + +#Configure the label displayed on the LCD screen for account 1. +account.4.label = + +#Configure the display name of account 1. +account.4.display_name = + +#Configure the username and password for register authentication. +account.4.auth_name = +account.4.password = + +#Configure the register user name. +account.4.user_name = + +#Configure the SIP server address. +account.4.sip_server_host = + +#Specify the port for the SIP server. The default value is 5060. +account.4.sip_server_port = + +#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.4.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.4.outbound_host = + +#Specify the server port, the default value is 5060. +account.4.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +account.4.transport = + +#Configure the address of the backup outbound proxy server. +account.4.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.4.backup_outbound_port = + + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.4.anonymous_call_oncode = +account.4.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.4.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.4.anonymous_reject_oncode = +account.4.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.4.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.4.expires = + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.4.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.4.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.4.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.4.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.4.cid_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.4.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.4.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.4.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.4.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.4.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.4.ptime = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.4.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.4.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.4.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.4.reg_fail_retry_interval = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.4.enable_signal_encode = + +#Configure the key for encoding. +account.4.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.4.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.4.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.4.dtmf.info_type = + + +####################################################################################### +## NAT Settings ## +####################################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.4.nat.nat_traversal = + +#Configure the STUN server address. +account.4.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.4.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.4.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.4.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.4.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.4.advanced.timer_t1 = +account.4.advanced.timer_t2 = +account.4.advanced.timer_t4 = + + +account.4.codec.1.enable = 1 +account.4.codec.1.payload_type = PCMU +account.4.codec.1.priority = 1 +account.4.codec.1.rtpmap = 0 + +account.4.codec.2.enable = 1 +account.4.codec.2.payload_type = PCMA +account.4.codec.2.priority = 2 +account.4.codec.2.rtpmap = 8 + +account.4.codec.3.enable = 0 +account.4.codec.3.payload_type = G723_53 +account.4.codec.3.priority =0 +account.4.codec.3.rtpmap = 4 + +account.4.codec.4.enable = 0 +account.4.codec.4.payload_type = G723_63 +account.4.codec.4.priority = 0 +account.4.codec.4.rtpmap = 4 + +account.4.codec.5.enable = 1 +account.4.codec.5.payload_type = G729 +account.4.codec.5.priority = 3 +account.4.codec.5.rtpmap = 18 + +account.4.codec.6.enable = 1 +account.4.codec.6.payload_type = G722 +account.4.codec.6.priority = 4 +account.4.codec.6.rtpmap = 9 + +account.4.codec.7.enable = 0 +account.4.codec.7.payload_type = G726-32 +account.4.codec.7.priority = 0 +account.4.codec.7.rtpmap = 2 + +account.4.codec.8.enable = 0 +account.4.codec.8.payload_type = iLBC_13_3 +account.4.codec.8.priority = 0 +account.4.codec.8.rtpmap = 97 + +account.4.codec.9.enable = 0 +account.4.codec.9.payload_type = iLBC_15_2 +account.4.codec.9.priority = 0 +account.4.codec.9.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +account.4.always_fwd.enable = + +#Configure the target phonenumber that the phone will forward the call to; +account.4.always_fwd.target = + +#Configure the on/off code for always forward; + + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +account.4.busy_fwd.enable = +account.4.busy_fwd.target = + + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +account.4.timeout_fwd.enable = +account.4.timeout_fwd.target = +account.4.timeout_fwd.timeout = + + +####################################################################################### +## DND ## +####################################################################################### + +#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. +features.dnd_mode = + +#Enable or disable the DND feautre for account4; 0-Disabled (default), 1-Enabled; +account.4.dnd.enable = + +#Configure the DND on code and off code for account4. + + + +####################################################################################### +## Account5 Settings ## +####################################################################################### + +#Enable or disable the account 1; 0-Disabled (default), 1-Enabled; +account.5.enable = + +#Configure the label displayed on the LCD screen for account 1. +account.5.label = + +#Configure the display name of account 1. +account.5.display_name = + +#Configure the username and password for register authentication. +account.5.auth_name = +account.5.password = + +#Configure the register user name. +account.5.user_name = + +#Configure the SIP server address. +account.5.sip_server_host = + +#Specify the port for the SIP server. The default value is 5060. +account.5.sip_server_port = + +#Enable or disable to use the outbound proxy server; 0-Disabled (default), 1-Enabled; +account.5.outbound_proxy_enable = + +#Specify the IP address or domain name of the outbound proxy server. +account.5.outbound_host = + +#Specify the server port, the default value is 5060. +account.5.outbound_port = + +#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; +account.5.transport = + +#Configure the address of the backup outbound proxy server. +account.5.backup_outbound_host = + +#Specify the port of the backup outbound proxy server, the default value is 5060. +account.5.backup_outbound_port = + + +#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.anonymous_call = + +#Configure the on code and off code of the anonymous call feature. +account.5.anonymous_call_oncode = +account.5.anonymous_call_offcode = + +#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; +account.5.reject_anonymous_call = + +#Configure the on code and off code of the reject anonymous call feature. +account.5.anonymous_reject_oncode = +account.5.anonymous_reject_offcode = + +#Configure the SIP port for account 1, the default value is 5060. +account.5.sip_listen_port = + +#Configure the register expiry time (in seconds), the default value is 3600. +account.5.expires = + +#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); +account.5.100rel_enable = + +#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; +account.5.precondition = + +#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; +account.5.subscribe_register = + +#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi = + +#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. +account.5.subscribe_mwi_expires = + +#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; +account.5.cid_source = + +#Enable or disable the session timer; 0-Disabled (default), 1-Enabled; +account.5.session_timer.enable = + +#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. +account.5.session_timer.expires = + +#Configure the session timer refresher; 0-Uac (default), 1-Uas; +account.5.session_timer.refresher = + +#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; +account.5.enable_user_equal_phone = + +#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; +account.5.srtp_encryption = + +#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. +account.5.ptime = + +#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; +account.5.subscribe_mwi_to_vm = + +#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; +account.5.register_mac = + +#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); +account.5.register_line = + +#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. +account.5.reg_fail_retry_interval = + +#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); +account.5.enable_signal_encode = + +#Configure the key for encoding. +account.5.signal_encode_key = + +#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; +account.5.dtmf.type = + +#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. +account.5.dtmf.dtmf_payload = + +#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; +account.5.dtmf.info_type = + + +####################################################################################### +## NAT Settings ## +####################################################################################### + +#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; +account.5.nat.nat_traversal = + +#Configure the STUN server address. +account.5.nat.stun_server = + +#Configure the STUN server port, the default value is 3478. +account.5.nat.stun_port = + +#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); +account.5.nat.udp_update_enable = + +#Specify the keep-alive interval (in seconds), the default value is 30. +account.5.nat.udp_update_time = + +#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; +account.5.nat.rport = + +#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. +account.5.advanced.timer_t1 = +account.5.advanced.timer_t2 = +account.5.advanced.timer_t4 = + +account.5.codec.1.enable = 1 +account.5.codec.1.payload_type = PCMU +account.5.codec.1.priority = 1 +account.5.codec.1.rtpmap = 0 + +account.5.codec.2.enable = 1 +account.5.codec.2.payload_type = PCMA +account.5.codec.2.priority = 2 +account.5.codec.2.rtpmap = 8 + +account.5.codec.3.enable = 0 +account.5.codec.3.payload_type = G723_53 +account.5.codec.3.priority =0 +account.5.codec.3.rtpmap = 4 + +account.5.codec.4.enable = 0 +account.5.codec.4.payload_type = G723_63 +account.5.codec.4.priority = 0 +account.5.codec.4.rtpmap = 4 + +account.5.codec.5.enable = 1 +account.5.codec.5.payload_type = G729 +account.5.codec.5.priority = 3 +account.5.codec.5.rtpmap = 18 + +account.5.codec.6.enable = 1 +account.5.codec.6.payload_type = G722 +account.5.codec.6.priority = 4 +account.5.codec.6.rtpmap = 9 + +account.5.codec.7.enable = 0 +account.5.codec.7.payload_type = G726-32 +account.5.codec.7.priority = 0 +account.5.codec.7.rtpmap = 2 + +account.5.codec.8.enable = 0 +account.5.codec.8.payload_type = iLBC_13_3 +account.5.codec.8.priority = 0 +account.5.codec.8.rtpmap = 97 + +account.5.codec.9.enable = 0 +account.5.codec.9.payload_type = iLBC_15_2 +account.5.codec.9.priority = 0 +account.5.codec.9.rtpmap = 97 + +####################################################################################### +## Call Forward ## +####################################################################################### +#Enable or disable the always forward, 0-Disabled(default), 1-Enabled; +account.5.always_fwd.enable = + +#Configure the target phonenumber that the phone will forward the call to; +account.5.always_fwd.target = + +#Configure the on/off code for always forward; + + +#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; +account.5.busy_fwd.enable = +account.5.busy_fwd.target = + + +#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; +#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); +account.5.timeout_fwd.enable = +account.5.timeout_fwd.target = +account.5.timeout_fwd.timeout = + + +####################################################################################### +## DND ## +####################################################################################### + +#Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. +features.dnd_mode = + +#Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; +account.5.dnd.enable = + +#Configure the DND on code and off code for account5. + +####################################################################################### +voice_mail.number.1 = *97 +## Network ## +####################################################################################### + +#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; +#Require reboot; +network.internet_port.type = + +#Configure the static IP address, submask, gateway and DNS server. +#Require reboot; +network.internet_port.ip = +network.internet_port.mask = +network.internet_port.gateway = +network.primary_dns= +network.secondary_dns = \ No newline at end of file