diff --git a/resources/templates/provision/yealink/t42g/y000000000029.cfg b/resources/templates/provision/yealink/t42g/y000000000029.cfg index 03dae5ab05..7786605837 100644 --- a/resources/templates/provision/yealink/t42g/y000000000029.cfg +++ b/resources/templates/provision/yealink/t42g/y000000000029.cfg @@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t42s/y000000000067.cfg b/resources/templates/provision/yealink/t42s/y000000000067.cfg index 9a61192c22..a51c2faac0 100644 --- a/resources/templates/provision/yealink/t42s/y000000000067.cfg +++ b/resources/templates/provision/yealink/t42s/y000000000067.cfg @@ -441,7 +441,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t43u/y000000000107.cfg b/resources/templates/provision/yealink/t43u/y000000000107.cfg index 0478091b48..d96fc0a46b 100644 --- a/resources/templates/provision/yealink/t43u/y000000000107.cfg +++ b/resources/templates/provision/yealink/t43u/y000000000107.cfg @@ -478,7 +478,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t46g/y000000000028.cfg b/resources/templates/provision/yealink/t46g/y000000000028.cfg index 2baf85e40d..eec1f38196 100644 --- a/resources/templates/provision/yealink/t46g/y000000000028.cfg +++ b/resources/templates/provision/yealink/t46g/y000000000028.cfg @@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t46s/y000000000066.cfg b/resources/templates/provision/yealink/t46s/y000000000066.cfg index 7234c58adb..41eaf49dd1 100644 --- a/resources/templates/provision/yealink/t46s/y000000000066.cfg +++ b/resources/templates/provision/yealink/t46s/y000000000066.cfg @@ -441,7 +441,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t46u/y000000000108.cfg b/resources/templates/provision/yealink/t46u/y000000000108.cfg index fe540e8d73..f164a48382 100644 --- a/resources/templates/provision/yealink/t46u/y000000000108.cfg +++ b/resources/templates/provision/yealink/t46u/y000000000108.cfg @@ -478,7 +478,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t48g/y000000000035.cfg b/resources/templates/provision/yealink/t48g/y000000000035.cfg index b0ace85c2c..9a145e1e30 100644 --- a/resources/templates/provision/yealink/t48g/y000000000035.cfg +++ b/resources/templates/provision/yealink/t48g/y000000000035.cfg @@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t48s/y000000000065.cfg b/resources/templates/provision/yealink/t48s/y000000000065.cfg index 2daa9ec0e3..8048caf98c 100644 --- a/resources/templates/provision/yealink/t48s/y000000000065.cfg +++ b/resources/templates/provision/yealink/t48s/y000000000065.cfg @@ -481,7 +481,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t48u/y000000000109.cfg b/resources/templates/provision/yealink/t48u/y000000000109.cfg index c44e83a90d..b0f62c1116 100644 --- a/resources/templates/provision/yealink/t48u/y000000000109.cfg +++ b/resources/templates/provision/yealink/t48u/y000000000109.cfg @@ -478,7 +478,7 @@ features.password_dial.length= features.password_dial.prefix= features.password_dial.enable= features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 features.headset_training= features.headset_prior= diff --git a/resources/templates/provision/yealink/t49g/y000000000051.cfg b/resources/templates/provision/yealink/t49g/y000000000051.cfg index 20edaa8cdb..3c287b5c79 100644 --- a/resources/templates/provision/yealink/t49g/y000000000051.cfg +++ b/resources/templates/provision/yealink/t49g/y000000000051.cfg @@ -858,7 +858,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000028.cfg b/resources/templates/provision/yealink/t4x/y000000000028.cfg index b86d775276..ae2ce09001 100644 --- a/resources/templates/provision/yealink/t4x/y000000000028.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000028.cfg @@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000029.cfg b/resources/templates/provision/yealink/t4x/y000000000029.cfg index 2c3369fb13..9cb67ba58b 100644 --- a/resources/templates/provision/yealink/t4x/y000000000029.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000029.cfg @@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000036.cfg b/resources/templates/provision/yealink/t4x/y000000000036.cfg index f6731195df..9b0e12ca8a 100644 --- a/resources/templates/provision/yealink/t4x/y000000000036.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000036.cfg @@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000054.cfg b/resources/templates/provision/yealink/t4x/y000000000054.cfg index 3643a46a14..d5ca09c7ab 100644 --- a/resources/templates/provision/yealink/t4x/y000000000054.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000054.cfg @@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000065.cfg b/resources/templates/provision/yealink/t4x/y000000000065.cfg index 813a179824..9847522f47 100644 --- a/resources/templates/provision/yealink/t4x/y000000000065.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000065.cfg @@ -454,48 +454,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000066.cfg b/resources/templates/provision/yealink/t4x/y000000000066.cfg index 7c6957a478..79c347b862 100644 --- a/resources/templates/provision/yealink/t4x/y000000000066.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000066.cfg @@ -413,48 +413,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000067.cfg b/resources/templates/provision/yealink/t4x/y000000000067.cfg index 4cbb3f5341..f01c9254ac 100644 --- a/resources/templates/provision/yealink/t4x/y000000000067.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000067.cfg @@ -413,48 +413,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000068.cfg b/resources/templates/provision/yealink/t4x/y000000000068.cfg index 84546c45cc..2cdf2935be 100644 --- a/resources/templates/provision/yealink/t4x/y000000000068.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000068.cfg @@ -413,48 +413,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000076.cfg b/resources/templates/provision/yealink/t4x/y000000000076.cfg index 7fec33aad9..9a20d25aea 100644 --- a/resources/templates/provision/yealink/t4x/y000000000076.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000076.cfg @@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0 phone_setting.called_party_info_display.enable = 1 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info -phone_setting.call_info_display_method = 0 +phone_setting.call_info_display_method = ${yealink_call_info_display_method} #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4. phone_setting.inter_digit_time = {$yealink_inter_digit_time} diff --git a/resources/templates/provision/yealink/t4x/y000000000107.cfg b/resources/templates/provision/yealink/t4x/y000000000107.cfg index 813a179824..9847522f47 100644 --- a/resources/templates/provision/yealink/t4x/y000000000107.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000107.cfg @@ -454,48 +454,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000108.cfg b/resources/templates/provision/yealink/t4x/y000000000108.cfg index 4225719b21..9de6943132 100644 --- a/resources/templates/provision/yealink/t4x/y000000000108.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000108.cfg @@ -413,48 +413,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = features.mute.autoanswer_mute.enable= features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000109.cfg b/resources/templates/provision/yealink/t4x/y000000000109.cfg index 813a179824..9847522f47 100644 --- a/resources/templates/provision/yealink/t4x/y000000000109.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000109.cfg @@ -454,48 +454,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = ####################################################################################### diff --git a/resources/templates/provision/yealink/t4x/y000000000116.cfg b/resources/templates/provision/yealink/t4x/y000000000116.cfg index 4cbb3f5341..f01c9254ac 100644 --- a/resources/templates/provision/yealink/t4x/y000000000116.cfg +++ b/resources/templates/provision/yealink/t4x/y000000000116.cfg @@ -413,48 +413,48 @@ features.anonymous_response_code= ####################################################################################### ## Call Configuration ## ####################################################################################### -phone_setting.incoming_call_when_dialing.priority= -phone_setting.hold_or_swap.mode= -features.play_held_tone.interval= -features.play_held_tone.delay= -features.play_held_tone.enable= -features.play_hold_tone.interval= -features.ignore_incoming_call.enable= -force.voice.ring_vol= -features.mute.autoanswer_mute.enable= +phone_setting.incoming_call_when_dialing.priority = +phone_setting.hold_or_swap.mode = +features.play_held_tone.interval = +features.play_held_tone.delay = +features.play_held_tone.enable = +features.play_hold_tone.interval = +features.ignore_incoming_call.enable = +force.voice.ring_vol = +features.mute.autoanswer_mute.enable = features.play_hold_tone.delay = phone_setting.end_call_net_disconnect.enable = -features.custom_auto_answer_tone.enable= -default_input_method.dialing= -features.speaker_mode.enable= -features.headset_mode.enable= -features.handset_mode.enable= +features.custom_auto_answer_tone.enable = +default_input_method.dialing = +features.speaker_mode.enable = +features.headset_mode.enable = +features.handset_mode.enable = features.conference.local.enable = -features.off_hook_answer.enable= -features.caller_name_type_on_dialing= -phone_setting.show_code403= -phone_setting.ring_for_tranfailed= -features.password_dial.length= -features.password_dial.prefix= -features.password_dial.enable= -features.group_listen_in_talking_enable= -phone_setting.call_info_display_method = 0 +features.off_hook_answer.enable = +features.caller_name_type_on_dialing = +phone_setting.show_code403 = +phone_setting.ring_for_tranfailed = +features.password_dial.length = +features.password_dial.prefix = +features.password_dial.enable = +features.group_listen_in_talking_enable = +phone_setting.call_info_display_method = ${yealink_call_info_display_method} phone_setting.called_party_info_display.enable = 1 -features.headset_training= -features.headset_prior= +features.headset_training = +features.headset_prior = features.dtmf.replace_tran = features.dtmf.transfer = phone_setting.ringing_timeout = {$yealink_ringing_timeout} -phone_setting.ringback_timeout= -features.hold_trans_delay= +phone_setting.ringback_timeout = +features.hold_trans_delay = transfer.multi_call_trans_enable = -features.keep_mute.enable= -linekey.1.shortlabel= +features.keep_mute.enable = +linekey.1.shortlabel = features.config_dsskey_length.shorten = transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} -features.auto_linekeys.enable= -phone_setting.call_appearance.calls_per_linekey= -features.linekey_call_with_default_account= +features.auto_linekeys.enable = +phone_setting.call_appearance.calls_per_linekey = +features.linekey_call_with_default_account = #######################################################################################