#!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## ####################################################################################### ## Network CDP ## ####################################################################################### static.network.cdp.enable = {$yealink_cdp_enable} static.network.cdp.packet_interval = {$yealink_cdp_packet_interval} ####################################################################################### ## Network IPv6 ## ####################################################################################### static.network.ipv6_static_dns_enable = static.network.ipv6_icmp_v6.enable = static.network.ipv6_secondary_dns = static.network.ipv6_primary_dns = static.network.ipv6_internet_port.gateway = static.network.ipv6_internet_port.ip = static.network.ipv6_internet_port.type = static.network.ipv6_prefix = ####################################################################################### ## Hostname ## ####################################################################################### static.network.dhcp_host_name = ####################################################################################### ## Network Internet ## ####################################################################################### static.network.ip_address_mode = {$yealink_ip_address_mode} static.network.vlan.pc_port_mode = {if isset($dns_server_primary)}static.network.static_dns_enable = 1{else}static.network.static_dns_enable = 0{/if} static.network.pc_port.enable = 1 static.network.primary_dns = {$dns_server_primary} static.network.secondary_dns = {$dns_server_secondary} static.network.internet_port.gateway = static.network.internet_port.mask = static.network.internet_port.ip = static.network.internet_port.type = #####v84SP4新需求新增### static.features.network_test.check_policy= static.features.network_test.enable= static.features.network_test.host= static.features.network_test.period= static.features.network_unavailable_test.period= static.network.dns.retry_times= static.network.preference= static.network.redundancy.failback.timeout= static.network.redundancy.mode= static.network.static_nat.addr= {$yealink_static_nat} static.network.static_nat.enable= {if isset($yealink_static_nat)}1{else}0{/if} static.security.server_ssl_method= ####################################################################################### ## Network Advanced ## ####################################################################################### ##It configures the transmission mode and speed of the Internet (WAN) port. ##0-Auto Negotiate ##1-Full Duplex 10Mbps ##2-Full Duplex 100Mbps ##3-Half Duplex 10Mbps ##4-Half Duplex 100Mbps ##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) ##The default value is 0.It takes effect after a reboot. static.network.internet_port.speed_duplex = ##It configures the transmission mode and speed of the PC (LAN) port. ##0-Auto Negotiate ##1-Full Duplex 10Mbps ##2-Full Duplex 100Mbps ##3-Half Duplex 10Mbps ##4-Half Duplex 100Mbps ##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP phones) ##The default value is 0.It takes effect after a reboot. static.network.pc_port.speed_duplex = ##It enable or disable to use A record of TTL ##The defalue value is 1;0-Disable 1-Enable static.network.dns.ttl_enable = ##It configures the LAN MTU ##The default value is 1500,.Integer from 128 to 1500.It takes effect after a reboot. static.network.mtu_value = static.network.dhcp.option60type= static.network.dns.last_cache_expired.enable= static.network.dns.last_cache_expired = static.network.dns.query_timeout = ####################################################################################### ## VLAN ## ####################################################################################### static.network.vlan.internet_port_priority = {$yealink_vlan_cos} static.network.vlan.internet_port_vid = {$yealink_vlan_id} {if isset($yealink_vlan_enable)}static.network.vlan.internet_port_enable = {$yealink_vlan_enable}{else}static.network.vlan.internet_port_enable = 0{/if} static.network.vlan.pc_port_priority = {$yealink_vlan_pc_cos} static.network.vlan.pc_port_vid = {$yealink_vlan_pc_id} {if isset($yealink_vlan_pc_enable)}static.network.vlan.pc_port_enable = {$yealink_vlan_pc_enable}{else}static.network.vlan.pc_port_enable = 0{/if} ##It configures LLDP or manually VLAN can't obtain IP, whether to switch to other methods of VLAN or closed VLAN to get IP ##(Except T19P/T21P Models) 0-Disable 1-Enable static.network.vlan.vlan_change.enable = ####################################################################################### ## WEB Port ## ####################################################################################### ##It configures the HTTP port for web server access. ##The default value is 80.It takes effect after a reboot. static.network.port.http = ##It configures the HTTPS port for web server access. ##The default value is 443.It takes effect after a reboot. static.network.port.https = static.wui.https_enable = static.wui.http_enable = ####################################################################################### ## QoS ## ####################################################################################### ##It configures the audio QoS. ##The default value is 46.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.audiotos = ##It configures the SIP QoS. ##The default value is 26.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.signaltos = ##It configures the video QoS. ##The default value is 34.It takes effect after a reboot.Integer from 0 to 63 static.network.qos.videotos = ####################################################################################### ## 802.1X ## ####################################################################################### static.network.802_1x.mode = static.network.802_1x.identity = static.network.802_1x.md5_password = static.network.802_1x.root_cert_url = static.network.802_1x.client_cert_url = ##It configure the mouth of the PC 802.1 x - logoff function.It takes effect after a reboot. ##The default value is 0-Dsable , 1-Enable static.network.802_1x.proxy_eap_logoff.enable = static.network.802_1x.eap_fast_provision_mode = static.network.802_1x.anonymous_identity = ####################################################################################### ## OpenVPN(Except T19P Model) ## ####################################################################################### static.network.vpn_enable = static.openvpn.url = ####################################################################################### ## LLDP ## ####################################################################################### static.network.lldp.enable = {$yealink_lldp_enable} static.network.lldp.packet_interval = {$yealink_lldp_packet_interval} ####################################################################################### ## Span to PC ## ####################################################################################### static.network.span_to_pc_port = ####################################################################################### ## RTP Port ## ####################################################################################### static.sip.min_udp_port= static.sip.max_udp_port= static.sip.min_tcp_port= static.sip.max_tcp_port= #####V84SP4新需求新增#### features.rtp_symmetric.enable= phone_setting.early_media.rtp_sniffer.timeout= ####################################################################################### ## Syslog ## ####################################################################################### static.syslog.enable = static.syslog.server = static.syslog.level = static.syslog.server_port = static.syslog.transport_type = static.syslog.facility = static.syslog.prepend_mac_address.enable = static.local_log.enable = static.local_log.level = static.local_log.max_file_size = ####V84SP4新需求新增##### syslog.usb.enable= ####################################################################################### ## TR069 ## ####################################################################################### static.managementserver.enable = static.managementserver.username = static.managementserver.password = static.managementserver.url = static.managementserver.connection_request_username = static.managementserver.connection_request_password = static.managementserver.periodic_inform_enable = static.managementserver.periodic_inform_interval = ####################################################################################### ## Autoprovision ## ## ####################################################################################### ### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server. ### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone, ### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC-local.cfg file on the provisioning server. ### 0-Disabled, 1-Enabled. The default value is 0. static.auto_provision.custom.sync = ### It enables or disables the phone to protect personalized configuration settings even after auto provisioning. ### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning. ### 0-Disabled, 1-Enabled. The default value is 0. static.auto_provision.custom.protect = static.auto_provision.custom.sync.path = static.auto_provision.custom.upload_method= static.auto_provision.attempt_expired_time = ##V83 Add static.auto_provision.authentication.expired_time = static.auto_provision.connect.keep_alive = static.auto_provision.inactivity_time_expire = custom.auto_provision.save_rps_info.enable= static.auto_provision.attempt_before_failed = static.auto_provision.retry_delay_after_file_transfer_failed= static.auto_provision.server.type = static.auto_provision.update_file_mode = static.auto_provision.prompt.enable = ####################################################################################### ## Autop Mode ## ####################################################################################### static.auto_provision.power_on = {$yealink_autop_power_on} ####################################################################################### ## Autop PNP ## ####################################################################################### static.auto_provision.pnp_enable = {$yealink_autop_pnp} ####################################################################################### ## Autop DHCP ## ####################################################################################### static.auto_provision.dhcp_option.enable = static.auto_provision.dhcp_option.list_user_options = ####################################################################################### ## Autop Repeat ## ####################################################################################### static.auto_provision.repeat.enable = {$yealink_autop_repeat_enable} static.auto_provision.repeat.minutes = {$yealink_autop_repeat_minutes} ####################################################################################### ## Autop Weekly ## ####################################################################################### static.auto_provision.weekly.enable = {$yealink_autop_weekly_enable} static.auto_provision.weekly.dayofweek = {$yealink_autop_weekly_dayofweek} static.auto_provision.weekly.begin_time = {$yealink_autop_weekly_begin_time} static.auto_provision.weekly.end_time = {$yealink_autop_weekly_end_time} static.auto_provision.weekly_upgrade_interval = {$yealink_autop_weekly_interval} ####################################################################################### ## Autop URL ## ####################################################################################### static.auto_provision.server.url = {$yealink_provision_url} static.auto_provision.server.username = {$http_auth_username} static.auto_provision.server.password = {$http_auth_password} ####################################################################################### ## Autop AES Key ## ####################################################################################### ##It configures the AES key for decrypting the Common CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. ##The default value is blank. static.auto_provision.aes_key_16.com = ##It configures the AES key for decrypting the MAC-Oriented CFG file. The valid characters contain: 0 ~ 9, A ~ Z, a ~ z. ##The default value is blank. static.auto_provision.aes_key_16.mac = static.auto_provision.aes_key_in_file = ##It configures the access URL of the custom MAC-Oriented CFG file. ##The default value is blank. static.custom_mac_cfg.url = ##It configures the value (vendor name of the device) of DHCP option 60. ##The default value is yealink. static.auto_provision.dhcp_option.option60_value = ##It configuration phone update to restart automatically.It takes effect after a reboot. ##0-Disable 1-Enable static.auto_provision.reboot_force.enable = ####################################################################################### ## Autop wildcard ## ####################################################################################### static.auto_provision.url_wildcard.pn = ####################################################################################### ## Autop Code ## ####################################################################################### ##It configures the name of the code for triggering auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.name = ##It configures the code for triggering auto provisioning. ##Valid characters are digits, # and *.Example:static.autoprovision.1.code = *99The default value is blank. ##It takes effect after a reboot. static.autoprovision.1.code = ##It configures the access URL of auto provisioning server.The default value is blank. ##It takes effect after a reboot. static.autoprovision.1.url = ##It configures the user name for authentication during auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.user = ##It configures the password for authentication during auto provisioning. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.password = ##It configures the AES key for decrypting the Common CFG file. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.com_aes = ##It configures the AES key for decrypting the MAC-Oriented CFG file. ##The default value is blank.It takes effect after a reboot. static.autoprovision.1.mac_aes = ######V84SP4新需求新增#### static.auto_provision.config_version.com= static.auto_provision.config_version.mac= static.auto_provision.custom.upload_method= static.auto_provision.dhcp_option.list_user6_options= static.auto_provision.dns_resolv_nosys= static.auto_provision.dns_resolv_nretry= static.auto_provision.dns_resolv_timeout= static.auto_provision.encryption.call_log= static.auto_provision.encryption.directory= static.auto_provision.pnp_check_url.enable= static.auto_provision.user_agent_mac.enable= ####################################################################################### ## Watch Dog ## ####################################################################################### static.watch_dog.enable = ####################################################################################### ## SIP Advanced ## ####################################################################################### sip.use_23_as_pound = sip.rfc2543_hold = {$yealink_rfc2543_hold} sip.use_out_bound_in_dialog = sip.reg_surge_prevention = sip.send_response_by_request = sip.notify_reboot_enable = sip.disp_incall_to_info = sip.listen_port = sip.tls_listen_port = sip.trust_ctrl = {$yealink_trust_ctrl} static.sip.nat_stun.enable = static.sip.nat_stun.server = static.sip.nat_stun.port = {if isset($stun_port)}{$stun_port}{else}3478{/if} sip.timer_t1 = sip.timer_t2 = sip.timer_t4 = ##It is ASCII conversion into corresponding symbols. ##The defalult value is blank. 0-Disable 1-Enable sip.escape_characters.enable = ##The default value is 0 ( said according to the transmission mode configured to listen on port),1- ##1-said at the same time to monitor TCP and UDP ##2-said to monitor TCP and UDP at the same time, and from the BLF - the LIST to subscribe to the contact with a transport = TCP parameters sip.listen_mode= {if isset($yealink_sip_listen_port)}sip.listen_port = {$yealink_sip_listen_port}{else}sip.listen_port = 5060{/if} ##The default value is 0.(contracting out the random contact, via port to carry fixed port).It takes effect after a reboot. ##1-the out-contracting port random contact, via port to carry ##2-the out-contracting ports fixed contact, via carry fix sip.tcp_port_random_mode = sip.call_fail_use_reason.enable= {$yealink_sip_call_fail_use_reason_enable} sip.cid_source.preference= ##V83 Add sip.request_validation.event= sip.request_validation.digest.realm= sip.request_validation.digest.list= sip.request_validation.source.list= ####V84SP4新需求新增####### phone_setting.disable_account_without_username.enable= sip.dhcp.option120.mode= sip.dns_transport_type= sip.loopback.auto_answer.mode= sip.loopback.enable= sip.loopback_type= sip.mac_in_ua= sip.pkt_loopback_directed_payload= sip.pkt_loopback_encapsulated_payload= sip.pkt_loopback_mode= sip.reliable_protocol.timerae.enable= sip.requesturi.e164.addglobalprefix= sip.reserve_characters= sip.sdp_early_answer_or_offer= sip.send_keepalive_by_socket= sip.skip_redundant_failover_addr= sip.sub_refresh_random= sip.unreg_with_socket_close= static.ice.enable= static.sip.nat_turn.enable= static.sip.nat_turn.password= static.sip.nat_turn.port= static.sip.nat_turn.server= static.sip.nat_turn.username= ####################################################################################### ## Echo Cancellation ## ####################################################################################### voice.vad = {$yealink_vad} voice.cng = {$yealink_cng} voice.echo_cancellation = {$yealink_echo_cancellation} voice.ans_nb.enable = voice.tns.enable = ####################################################################################### ## Jitter Buffer ## ####################################################################################### voice.jib.adaptive = {$yealink_jib_adaptive} voice.jib.min = {$yealink_jib_min} voice.jib.max = {$yealink_jib_max} voice.jib.normal = {$yealink_jib_normal} ####################################################################################### ## Tones ## ####################################################################################### voice.tone.country = {$yealink_voice_tone_country} voice.tone.dial = voice.tone.ring = voice.tone.busy = voice.tone.congestion = voice.tone.callwaiting = voice.tone.dialrecall = voice.tone.info = voice.tone.stutter = voice.tone.autoanswer = ####################################################################################### ## Volume ## ####################################################################################### voice.handfree_send = voice.handset_send = voice.headset_send = voice.headset.autoreset_spk_vol= voice.handset.autoreset_spk_vol= voice.handfree.autoreset_spk_vol= ####################################################################################### ## Transfer ## ####################################################################################### ##It enables or disables the transferee party’s phone to prompt a missed call on the LCD screen before displaying ##the caller ID when performing a semi-attended transfer.0-Enabled,1-Disabled ##The default value is 1. transfer.semi_attend_tran_enable = {$yealink_transfer_semi_attended} ##It enables or disables the phone to complete the blind transfer through on-hook.0-Disabled,1-Enabled . ##The default value is 1. transfer.blind_tran_on_hook_enable = {$yealink_transfer_blind_on_hook} ##It enables or disables the phone to transfer call to the two parties after a local conference call hangs up. ##0-Disabled,1-Enabled. ##The default value is 0. transfer.tran_others_after_conf_enable = {$yealink_transfer_after_conf} ##It enables or disables the phone to complete the attended transfer through on-hook. ##0-Disabled,1-Enabled. ##The default value is 1. transfer.on_hook_trans_enable = {$yealink_transfer_onhook} ##It configures the DSS key behavior during an active call when user presses the DSS ##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key. ##0-New Call,1-Attended Transfer,2-Blind Transfer. ##The default value is 2. transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode} ####################################################################################### ## Language Settings ## ####################################################################################### ##It configures the language of the web user interface. lang.wui = {$yealink_language_web} ##It configures the language of the phone user interface. ##The default value is English. lang.gui = {$yealink_language_gui} gui_lang.url = gui_lang.delete = wui_lang.url = wui_lang_note.url = wui_lang.delete = ####################################################################################### ## Auto Redial ## ####################################################################################### auto_redial.enable = auto_redial.interval = auto_redial.times = ####################################################################################### ## Zero Touch ## ####################################################################################### static.zero_touch.enable = {$yealink_zero_touch_enable} static.zero_touch.wait_time = {$yealink_zero_touch_wait_time} static.features.hide_zero_touch_url.enable = {$yealink_zero_touch_hide} static.zero_touch.network_fail_wait_times = {$yealink_zero_touch_wait} static.zero_touch.network_fail_delay_times = {$yealink_zero_touch_delay} ####################################################################################### ## Dial Plan ## ####################################################################################### dialplan.area_code.code = dialplan.area_code.min_len = dialplan.area_code.max_len = dialplan.area_code.line_id = ### X ranges from 1 to 10 ###dialplan.block_out.number.x = ###dialplan.block_out.line_id.x = dialplan.block_out.number.1 = dialplan.block_out.line_id.1 = ###X ranges from 1 to 100 ###dialplan.dialnow.rule.X = ###dialplan.dialnow.line_id.X = dialplan.dialnow.rule.1 = {$yealink_dialplan_dialnow_rule_1} dialplan.dialnow.line_id.1 = ###X ranges from 1 to 100 ###dialplan.replace.prefix.X = ###dialplan.replace.replace.X = ###dialplan.replace.line_id.X = dialplan.replace.prefix.1 = dialplan.replace.replace.1 = dialplan.replace.line_id.1 = dialplan_dialnow.url = phone_setting.dialnow_delay = dialplan_replace_rule.url = ####################################################################################### ## Remote Phonebook(Except T20P Model) ## ####################################################################################### ###X ranges from 1 to 5 ###remote_phonebook.data.X.url = ###remote_phonebook.data.X.name = {if isset($yealink_remote_phonebook_1_url) } remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url} {else} remote_phonebook.data.1.url = https://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=users {/if} {if isset($yealink_remote_phonebook_1_name) } remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name} {else} remote_phonebook.data.1.name = Users {/if} = remote_phonebook.display_name = ###It enables or disables the phone to update the data of the remote phone book at a time when accessing the remote phone book. ###0-Disabled, 1-Enabled. The default value is 0. features.remote_phonebook.enter_update_enable = ##It enables or disables the phone to perform a remote phone book search when receiving an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. features.remote_phonebook.enable = {$yealink_remote_phonebook_enable} ##It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server. ##The value 0 means the phone will not regularly update the data of the remote phone book from the remote phone book server. ##The default value is 21600.Integer from 3600 to 2592000,and 0. features.remote_phonebook.flash_time = ####V84SP4新增#### directory_setting.remote_phone_book.enable= directory_setting.remote_phone_book.priority= search_in_dialing.remote_phone_book.enable= search_in_dialing.remote_phone_book.priority= ####################################################################################### ## LDAP ## ####################################################################################### ##It enables or disables LDAP feature.0-Disabled,1-Enabled. ##The default value is 0. ldap.enable = {$ldap_enable} ##It configures the criteria for searching the contact name attributes. ##Example:ldap.name_filter = (|(cn=%)(sn=%)). ##The default value is blank. ldap.name_filter = {$ldap_name_filter} ##It configures the criteria for searching the contact number attributes. ##Example:ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%)) ##The default value is blank. ldap.number_filter = {$ldap_number_filter} ##It configures the IP address or domain name of the LDAP server. ##The default value is blank. ldap.host = {$ldap_host} ##It configures the port of the LDAP server. ##The default value is 389.Integer from 1 to 65535. ldap.port = {$ldap_port} ##It configures the LDAP search base which corresponds to the location of the LDAP phonebook. ##Example:ldap.base = dc=yealink,dc=cn. ##The default value is blank. ldap.base = {$ldap_base} ##It configures the user name for accessing the LDAP server. ##The default value is blank. ldap.user = {$ldap_user} ##It configures the password for accessing the LDAP server. ##The default value is blank. ldap.password = {$ldap_password} ##It configures the maximum of the search results returned by the LDAP server to be displayed. ##The default value is 50.Integer from 1 to 32000. ldap.max_hits = {$ldap_max_hits} ##It configures the name attributes of each record to be returned by the LDAP server. ##Multiple attributes are separated by spaces.Example:ldap.name_attr =sn cn. ##The default value is blank. ldap.name_attr = {$ldap_name_attr} ##It configures the number attributes of each record to be returned by the LDAP server. ##Multiple attributes are separated by spaces.Example:ldap.numb_attr = Mobile ipPhone. ##The default value is blank. ldap.numb_attr = {$ldap_numb_attr} ##It configures the display name of the contact record displayed on the LCD screen. The value of this parameter must start with “%” symbol. ##Example:ldap.display_name = %cn ##The default value is blank. ldap.display_name = {$ldap_display_name} ##It configures the LDAP version. ##The default value is 3. ldap.version = {$ldap_version} ##It enables or disables the phone to perform an LDAP search when receiving an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. ldap.call_in_lookup = {$ldap_call_in_lookup} ##It enables or disables the phone to sort the search results in alphabetical order or numerical order. ##0-Disabled,1-Enabled. ##The default value is 0. ldap.ldap_sort = {$ldap_sort} ##It is the electricity + start, automatic search + 00 the beginning and the beginning of the numbe ##The default value is 0.(0-Disable,1-Enable )(Except T19P/T21P Models) ldap.incoming_call_special_search.enable = ##The default value is 0,value of 0 to 2, respectively the ldap, ldap + StarTLS and ldaps ldap.tls_mode = ldap.call_out_lookup = {$ldap_dial_lookup} ldap.customize_label= ####V84SP4新增#### directory_setting.ldap.enable= directory_setting.ldap.priority= search_in_dialing.ldap.enable= search_in_dialing.ldap.priority= ldap.anonymous_bind_operation.enable= ldap.custom_extra_attr_name= ldap.display_extra_attr= ldap.extra_attr= ldap.numb_display_mode= ldap.search_type= phone_setting.reverse_lookup.contact_list.replace.pattern= phone_setting.reverse_lookup.contact_list.replace.with= phone_setting.reverse_lookup.incoming_call.replace.pattern= phone_setting.reverse_lookup.incoming_call.replace.with= ####################################################################################### ## Features ## ####################################################################################### features.normal_refuse_code = features.auto_answer_delay = features.allow_mute = features.group_listen_in_talking_enable = features.call_completion_enable = features.call_num_filter = features.direct_ip_call_enable = {$yealink_direct_ip_call_enable} features.relog_offtime = features.ringer_device.is_use_headset = features.factory_pwd_enable = features.anonymous_response_code = features.show_action_uri_option = features.reset_by_long_press_enable = features.upload_server = features.call_log_show_num = features.call_invite_format = phone_setting.logon_wizard_forever_wait = features.caller_name_type_on_dialing = features.off_hook_answer.enable = features.auto_linekeys.enable = features.blf_pickup_only_send_code = ##It is configured in the middle of the screen shows the current default at the bottom of the account name. ##The default is 0.CNT version 1. features.reboot_in_talk_enable = features.barge_in_via_username.enable = features.flash_url_dsskey_led.enable = static.features.default_account = features.linekey_call_with_default_account = ####V84SP4新需求新增####### features.show_default_account= phone_setting.change_183_to_180= ####################################################################################### ## Features Forward ## ####################################################################################### features.fwd_mode = features.fwd_diversion_enable = ####v84SP4新需求新增### features.fwd.allow = {$yealink_fwd_allow} forward.idle_access_always_fwd.enable= phone_setting.ring_duration= ####################################################################################### ## Features DND ## ####################################################################################### features.dnd_mode = features.dnd.enable = {if isset($yealink_feature_key_sync) && $yealink_feature_key_sync == "1"} features.dnd.off_code = features.dnd.on_code = {else} features.dnd.off_code = {$yealink_dnd_off_code} features.dnd.on_code = {$yealink_dnd_on_code} {/if} features.dnd_refuse_code = features.dnd.emergency_enable = features.dnd.emergency_authorized_number = ###V84SP4新需求新增####### features.dnd.allow= {$yealink_dnd_allow} features.dnd.large_icon.enable= features.keep_dnd.enable= ####################################################################################### ## Features Bluetooth ## ####################################################################################### features.bluetooth_enable = features.bluetooth_enable static.bluetooth.function.enable = features.bluetooth_adapter_name= {$yealink_bluetooth_name} voice.bluetooth_headset_send= ####V85 add########## bluetooth.high_encryption.enable= ####################################################################################### ## Features BLF(BLF/BLF List) ## ####################################################################################### ##It configures BLF LED mode and provides four kinds of definition for the BLF/BLF list key LED status. ##For more information, refer to BLF LED Mode on page 218. ##The default value is 0. features.blf_led_mode = {$yealink_blf_led_mode} ##It enables or disables the phone to deal with the Version header in the BLF NOTIFY message sent by the server. ##0-Disabled,1-Enabled. ##The default value is 0.It takes effect after a reboot. features.blf_list_version = ###########V84SP4新需求加入####### blf.enhanced.callin.callin.action= blf.enhanced.callin.enable= blf.enhanced.callin.idle.action= blf.enhanced.callin.led= blf.enhanced.callin.talking.action= blf.enhanced.callout.callin.action= blf.enhanced.callout.enable= blf.enhanced.callout.idle.action= blf.enhanced.callout.led= blf.enhanced.callout.talking.action= blf.enhanced.dnd.enable= blf.enhanced.dnd.led= blf.enhanced.hold.enable= blf.enhanced.hold.led= blf.enhanced.idle.callin.action= blf.enhanced.idle.enable= blf.enhanced.idle.idle.action= blf.enhanced.idle.led= blf.enhanced.idle.talking.action= blf.enhanced.parked.callin.action= blf.enhanced.parked.enable= blf.enhanced.parked.idle.action= blf.enhanced.parked.led= blf.enhanced.parked.talking.action= blf.enhanced.talking.callin.action= blf.enhanced.talking.enable= blf.enhanced.talking.idle.action= blf.enhanced.talking.led= blf.enhanced.talking.talking.action= blf.listen_barge_in_code= blf.normal_barge_in_code= blf.whisper_barge_in_code= features.auto_release_bla_line= features.blf.intercom_mode.enable= features.blf.ring_type = {$yealink_blf_ring_type} features.blf.show_callinfo.enable= features.blf_extension.mode= ####################################################################################### ## Features Intercom ## ####################################################################################### features.intercom.allow = features.intercom.mute = features.intercom.tone = features.intercom.barge = features.intercom.led.enable = features.intercom.subscribe.enable = features.intercom.barge_in_dialing.enable= sip.intercom_sub.enable = #####V84SP4新需求新增####### features.intercom.feature_access_code= features.intercom.mode= ####################################################################################### ## Features Hotline ## ####################################################################################### ##It configures the hotline number. ##The default value is blank. features.hotline_number = ##It configures the delay time (in seconds) for the phone to dial out the hotline number automatically. ##The default value of delay time is 4.Integer from 0 to 10 features.hotline_delay = ####################################################################################### ## Features DTMF ## ####################################################################################### features.dtmf.hide = {$yealink_dtmf_hide} ###Except T20P Model features.dtmf.hide_delay = features.dtmf.repetition = features.dtmf.transfer = features.dtmf.replace_tran = features.dtmf.duration = features.dtmf.volume = features.play_local_dtmf_tone_enable = ####V84SP4新需求新增##### features.dtmf.min_interval= ####################################################################################### ## Features Audio Settings ## ####################################################################################### features.headset_prior = {$yealink_headset_prior} features.headset_training = features.alert_info_tone = features.busy_tone_delay = features.send_pound_key = features.key_as_send = features.send_key_tone = features.key_tone = features.play_hold_tone.enable = features.play_hold_tone.delay = features.redial_tone = features.partition_tone = ####################################################################################### ## Features Action URI ## ####################################################################################### features.action_uri_limit_ip = ####################################################################################### ## Features Prefix ## ####################################################################################### features.password_dial.enable = features.password_dial.prefix = features.password_dial.length = ####################################################################################### ## Features History ## ####################################################################################### features.save_call_history = features.redial_via_local_sip_server.enable= features.local_calllog.received.replace_rule= ##V83 Add features.calllog_detailed_information = static.auto_provision.local_calllog.write_delay.terminated= static.auto_provision.local_calllog.backup.path= static.auto_provision.local_calllog.backup.enable= ####V84SP4新需求新增####### features.call_log_merge.enable= search_in_dialing.history.enable= search_in_dialing.history.priority= ####################################################################################### ## Notification Popups ## ####################################################################################### features.voice_mail_popup.enable = {$yealink_voice_mail_popup_enable} features.missed_call_popup.enable = {$yealink_missed_call_popup_enable} features.forward_call_popup.enable = ####################################################################################### ## Ringtone ## ####################################################################################### ringtone.url = {$yealink_ringtone_url} ringtone.delete = {$yealink_ringtone_delete} ####################################################################################### ## Phone Settings ## ####################################################################################### phone_setting.inter_digit_time = {$yealink_inter_digit_time} phone_setting.ring_type = {$yealink_ring_type} phone_setting.ring_for_tranfailed = phone_setting.is_deal180 = phone_setting.show_code403 = phone_setting.ringback_timeout = phone_setting.ringing_timeout = {$yealink_ringing_timeout} phone_setting.page_tip = phone_setting.predial_autodial = 1 phone_setting.headsetkey_mode = static.phone_setting.reserve_certs_enable = phone_setting.called_party_info_display.enable = phone_setting.call_info_display_method = {$yealink_call_info_display_method} ####################################################################################### ## Power Led Settings ## ####################################################################################### phone_setting.common_power_led_enable = phone_setting.talk_and_dial_power_led_enable = phone_setting.mail_power_led_flash_enable = phone_setting.ring_power_led_flash_enable = phone_setting.mute_power_led_flash_enable= phone_setting.hold_and_held_power_led_flash_enable = phone_setting.missed_call_power_led_flash.enable = {$yealink_missed_call_power_led_flash_enable} ##It configures the level of the active backlight intensity. ##The default value is 8. phone_setting.active_backlight_level = ####################################################################################### ## Phone Setting Display ## ####################################################################################### ##It configures the backlight time (in seconds).0, 1, 15, 30, 60, 120, 300, 600 or 1800. phone_setting.backlight_time = {$yealink_backlight_time} {if isset($yealink_t54w_wallpaper_filename)} phone_setting.backgrounds = Config:{$yealink_t54w_wallpaper_filename} {else} phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png {/if} wallpaper_upload.url = {$yealink_t54w_wallpaper} expansion_module.backgrounds = {$yealink_wallpaper_expansion} ####################################################################################### ## Phone Setting BLF ## ####################################################################################### ###It enables or disables the phone to automatically configure the BLF list keys in order. ###0-Disabled,1-Enabled. ###The default value is 1. phone_setting.auto_blf_list_enable = ###It configures the order of BLF list keys assigned automatically. ###0-Line Keys->Extension Keys ###1-Extension Keys->Line Keys ###The default value is 0. phone_setting.blf_list_sequence_type = ####################################################################################### ## Key Lock ## ####################################################################################### ###It enables or disables keypad lock feature. ###0-Disabled,1-Enabled. ###The default value is 0. phone_setting.phone_lock.enable = {$yealink_lock_enable} ###It configures the password for unlocking the keypad. ###The default value is 123. phone_setting.phone_lock.unlock_pin = {$yealink_lock_pin} ###It configures the interval (in seconds) to automatically lock the keypad. ###The default value is 0 (the keypad is locked only by long pressing the pound key or pressing the keypad lock key) phone_setting.phone_lock.lock_time_out = {$yealink_lock_timeout} phone_setting.emergency.number = {$yealink_emergency_number} ######V84SP4新需求加入####### custom.features.dsskey_lock_type= custom.features.dsskey_unlock_password= ####################################################################################### ## Multicast ## ####################################################################################### ##multicast.listen_address.X.label ##multicast.paging_address.X.channel ##multicast.listen_address.X.ip_address ##multicast.paging_address.X.ip_address ##multicast.paging_address.X.label ##multicast.listen_address.X.channel ##multicast.listen_address.X.volume ##Multicast(X ranges from 1 to 31.) multicast.codec = multicast.paging_address.1.channel = multicast.paging_address.1.label = multicast.paging_address.1.ip_address = multicast.receive_priority.enable = {$yealink_multicast_receive_priority_enable} multicast.receive_priority.priority = {$yealink_multicast_receive_priority_priority} multicast.receive.use_speaker = {$yealink_multicast_receive_use_speaker} multicast.receive.enhance_volume = {$yealink_multicast_receive_enhance_volume} multicast.receive.ignore_dnd.priority = {$yealink_multicast_receive_ignore_dnd_priority} multicast.listen_address.1.channel = {$yealink_multicast_listen_address_1_channel} multicast.listen_address.1.label = {$yealink_multicast_listen_address_1_label} multicast.listen_address.1.ip_address = {$yealink_multicast_listen_address_1_ip_address} multicast.listen_address.1.volume = {$yealink_multicast_listen_address_1_volume} multicast.listen_address.2.channel = {$yealink_multicast_listen_address_2_channel} multicast.listen_address.2.label = {$yealink_multicast_listen_address_2_label} multicast.listen_address.2.ip_address = {$yealink_multicast_listen_address_2_ip_address} multicast.listen_address.2.volume = {$yealink_multicast_listen_address_2_volume} multicast.listen_address.3.channel = {$yealink_multicast_listen_address_3_channel} multicast.listen_address.3.label = {$yealink_multicast_listen_address_3_label} multicast.listen_address.3.ip_address = {$yealink_multicast_listen_address_3_ip_address} multicast.listen_address.3.volume = {$yealink_multicast_listen_address_3_volume} multicast.listen_address.4.channel = {$yealink_multicast_listen_address_4_channel} multicast.listen_address.4.label = {$yealink_multicast_listen_address_4_label} multicast.listen_address.4.ip_address = {$yealink_multicast_listen_address_4_ip_address} multicast.listen_address.4.volume = {$yealink_multicast_listen_address_4_volume} multicast.listen_address.5.channel = {$yealink_multicast_listen_address_5_channel} multicast.listen_address.5.label = {$yealink_multicast_listen_address_5_label} multicast.listen_address.5.ip_address = {$yealink_multicast_listen_address_5_ip_address} multicast.listen_address.5.volume = {$yealink_multicast_listen_address_5_volume} ####################################################################################### ## Super Search ## ####################################################################################### super_search.recent_call = super_search.url = {$yealink_super_search_url} ####################################################################################### ## Security ## ####################################################################################### ###Define the login username and password of the user, var and administrator. ###If you change the username of the administrator from "admin" to "admin1", your new administrator's username should be configured as: security.user_name.admin = admin1. ###If you change the password of the administrator from "admin" to "admin1pwd", your new administrator's password should be configured as: security.user_password = admin1:admin1pwd. ###The following examples change the user's username to "user23" and the user's password to "user23pwd". ###static.security.user_name.user = user23 ###static.security.user_password = user23:user23pwd ###The following examples change the var's username to "var55" and the var's password to "var55pwd". ###static.security.user_name.var = var55 ###static.security.user_password = var55:var55pwd {if isset($user_name) } static.security.user_name.user = {$user_name} static.security.user_password = {$user_name}:{$user_password} {/if} {if isset($admin_name) } static.security.user_name.admin = {$admin_name} static.security.user_password = {$admin_name}:{$admin_password} {/if} {if isset($var_name) } static.security.user_name.var = {$var_name} static.security.user_password = {$var_name}:{$var_password} {/if} ###It enables or disables the phone to only accept the certificates in the Trusted Certificates list. ###0-Disabled,1-Enabled. ###The default value is 1.It takes effect after a reboot. static.security.trust_certificates = {$yealink_trust_certificates} ###It configures the source certificates for the phone to authenticate for TLS connection. ###0-Default certificates,1-Custom certificates,2-All certificates. ###The default value is 0.It takes effect after a reboot. static.security.ca_cert = ###It configures the device certificates for the phone to send for TLS authentication. ###0-Default certificates,1-Custom certificates. ###The default value is 0.It takes effect after a reboot. static.security.dev_cert = ###It enables or disables the phone to mandatorily validate the CommonName or SubjectAltName of the certificate received from the connecting server. ###0-Disabled,1-Enabled. ###The default value is 0.It takes effect after a reboot. static.security.cn_validation = ##V83 Add phone_setting.reserve_certs_config.enable = security.tls_cipher_list = {$yealink_security_tls_cipher_list} ####################################################################################### ## User Mode ## ####################################################################################### ###It enables or disables the 3-level permissions (admin, user, var). ###0-Disabled,1-Enabled. ###The default value is 0.It takes effect after a reboot. static.security.var_enable = static.web_item_level.url = ####################################################################################### ## Trusted Certificates ## ####################################################################################### static.trusted_certificates.url = static.trusted_certificates.delete = ####################################################################################### ## Server Certificates ## ####################################################################################### static.server_certificates.url = static.server_certificates.delete = ####################################################################################### ## Conference ## ####################################################################################### features.local_conf.combine_with_one_press.enable= ####################################################################################### ## Line Key ## ####################################################################################### ###T58V/VP59 X ranges from 1 to 27 #linekey.X.type--Customize the linekey type. #The valid types are: #0-NA 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 7-Call Return 8-SMS 9-Directed Pickup 10-Call Park 11-DTMF 12-Voice Mail 13-Speed Dial #14-Intercom 15-Line 16-BLF 17-URL 18-Group Listening 20-Private Hold 22-XML Group 23-Group Pickup 24-Multicast Paging 25-Record 27-XML Browser #34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero Touch 42-ACD 45-Local Group 46-Network Group 49-Custom Button 50-Keypad Lock #55-Meet-Me Conference 56-Retrieve Park 57-Hoteling 58-ACD Grace 59-Sisp Code 60-Emergency 61-Directory 84-open door 85-video monitoring #0-NA #22-XML Group #38-LDAP #46-Network Group #17-URL ###linekey.X.line = ###linekey.X.value = ###linekey.X.type = ###linekey.X.xml_phonebook = ###linekey.X.label = ###linekey.X.extension {foreach $keys['line'] as $row} #Configure Line Key {$row.device_key_id} linekey.{$row.device_key_id}.line = {$row.device_key_line} linekey.{$row.device_key_id}.value = {$row.device_key_value} {if $row.device_key_type == "1" || $row.device_key_type == "16"} linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} {else} linekey.{$row.device_key_id}.extension = {$row.device_key_extension} {/if} linekey.{$row.device_key_id}.type = {$row.device_key_type} linekey.{$row.device_key_id}.xml_phonebook = linekey.{$row.device_key_id}.label = {$row.device_key_label} {/foreach} ###It configures the desired line to apply the key feature.Integer from 1 to 16 #linekey.1.line = ###It configures the value of the line key feature. ###For example, when setting the key feature to BLF, it configures the number of the monitored user. ###The default value is blank. #linekey.1.value = ###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature. ###It only applies to BLF and Meet-Me conference features. ###The default value is blank. #linekey.1.extension ###It configures the key feature for the line key X. #linekey.1.type = ###It configures the desired local group/XML group/network group for the line key X. ###It only applies to the Local Group, XML Group and Network Group features. #linekey.1.xml_phonebook = ###It configures the label displayed on the LCD screen for each line key. ###The default value is blank. #linekey.1.label = ########################################################################################## ## Programmable Key ## ########################################################################################## #T58VT56A/VP59 X ranges from 1 to 4,12 to 14 #programablekey.x.value = #programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #programablekey.x.history_type = #programablekey.x.label--This parameter is only available to the key 1 to key 4. #programablekey.X.type = #programablekey.X.line = #programablekey.X.extension= {foreach $keys["programmable"] as $row} programablekey.{$row.device_key_id}.type = {$row.device_key_type} {if $row.device_key_type == "22" || $row.device_key_type == "47"} programablekey.{$row.device_key_id}.xml_phonebook = {$row.device_key_line} {else} programablekey.{$row.device_key_id}.line = {$row.device_key_line} programablekey.{$row.device_key_id}.value = {$row.device_key_value} {/if} programablekey.{$row.device_key_id}.extension = {$row.device_key_extension} programablekey.{$row.device_key_id}.label = {$row.device_key_label} programablekey.1.pickup_value ={$row.device_key_extension} programablekey.1.history_type = {/foreach} #programablekey.1.type = #programablekey.1.line = #programablekey.1.value = #programablekey.1.history_type = #programablekey.1.label = #programablekey.1.xml_phonebook = #programablekey.1.extension= ####################################################################################### ## Expansion Key ## ####################################################################################### ##expansion_module.X.key.Y.type ##expansion_module.X.key.Y.line ##expansion_module.X.key.Y.value ##expansion_module.X.key.Y.extension ##expansion_module.X.key.Y.label ##expansion_module.X.key.Y.xml_phonebook ## Expansion Key X ranges(SIP-T58/T56/VP59: X ranges from 1 to 3, Y ranges from 1 to 60）## {foreach $keys["expansion"] as $row} expansion_module.key.{$row.device_key_id}.type = {$row.device_key_type} expansion_module.key.{$row.device_key_id}.label = expansion_module.key.{$row.device_key_id}.value = {$row.device_key_value} expansion_module.key.{$row.device_key_id}.line = {$row.device_key_line} expansion_module.key.{$row.device_key_id}.extension = {$row.device_key_extension} expansion_module.key.{$row.device_key_id}.xml_phonebook = {$row.device_key_label} expansion_module.page_tip.blf_call_in.led = expansion_module.page_tip.blf_call_in.enable = {/foreach} ######V84SP4新需求新增####### expkey.type_range.custom= linekey.type_range.custom= programablekey.type_range.custom= phone_setting.keytype_sequence= phone_setting.uc_favorite_sequence_type= ####################################################################################### ## Forward Always ## ####################################################################################### forward.always.enable = forward.always.target = forward.always.on_code = {$yealink_forward_always_on_code} forward.always.off_code = {$yealink_forward_always_off_code} ####################################################################################### ## Forward Busy ## ####################################################################################### forward.busy.enable = forward.busy.target = forward.busy.on_code = forward.busy.off_code = ####################################################################################### ## Forward No Answer ## ####################################################################################### forward.no_answer.enable = forward.no_answer.target = forward.no_answer.timeout = forward.no_answer.on_code = forward.no_answer.off_code = ####v84SP4新需求新增### features.forward.no_answer.show_ring_times= ####################################################################################### ## Forward International ## ####################################################################################### ###It enables or disables the phone to forward incoming calls to international numbers. ###0-Disabled,1-Enabled. ###The default value is 1. forward.international.enable = ####################################################################################### ## Hotdesking Startup ## ####################################################################################### phone_setting.logon_wizard = ############## hotdesking.startup_register_name_enable = hotdesking.startup_username_enable = hotdesking.startup_password_enable = hotdesking.startup_sip_server_enable = hotdesking.startup_outbound_enable = ####################################################################################### ## Hotdesking Dsskey ## ####################################################################################### hotdesking.dsskey_register_name_enable = hotdesking.dsskey_username_enable = hotdesking.dsskey_password_enable = hotdesking.dsskey_sip_server_enable = hotdesking.dsskey_outbound_enable = ####################################################################################### ## Alert Info ## ####################################################################################### ###X ranges from 1 to 100 ###distinctive_ring_tones.alert_info.x.text = ###distinctive_ring_tones.alert_info.x.ringer = ###It configures the internal ringer text for distinctive ringtone. ###Example: distinctive_ring_tones.alert_info.1.text = Family ###The default value is blank. distinctive_ring_tones.alert_info.1.text = {$yealink_ring_text_1} distinctive_ring_tones.alert_info.2.text = {$yealink_ring_text_2} distinctive_ring_tones.alert_info.3.text = {$yealink_ring_text_3} distinctive_ring_tones.alert_info.4.text = {$yealink_ring_text_4} distinctive_ring_tones.alert_info.5.text = {$yealink_ring_text_5} distinctive_ring_tones.alert_info.6.text = {$yealink_ring_text_6} distinctive_ring_tones.alert_info.7.text = {$yealink_ring_text_7} distinctive_ring_tones.alert_info.8.text = {$yealink_ring_text_8} distinctive_ring_tones.alert_info.9.text = {$yealink_ring_text_9} distinctive_ring_tones.alert_info.10.text = {$yealink_ring_text_10} ###It configures the desired ring tones for each text. ###The value ranges from 1 to 8, the digit stands for the appropriate ringtone. ###Ring tones 6-8 are only applicable to SIP-T46G IP phones. ###The default value is 1. distinctive_ring_tones.alert_info.1.ringer = {$yealink_ring_file_1} distinctive_ring_tones.alert_info.2.ringer = {$yealink_ring_file_2} distinctive_ring_tones.alert_info.3.ringer = {$yealink_ring_file_3} distinctive_ring_tones.alert_info.4.ringer = {$yealink_ring_file_4} distinctive_ring_tones.alert_info.5.ringer = {$yealink_ring_file_5} distinctive_ring_tones.alert_info.6.ringer = {$yealink_ring_file_6} distinctive_ring_tones.alert_info.7.ringer = {$yealink_ring_file_7} distinctive_ring_tones.alert_info.8.ringer = {$yealink_ring_file_8} distinctive_ring_tones.alert_info.9.ringer = {$yealink_ring_file_9} distinctive_ring_tones.alert_info.10.ringer = {$yealink_ring_file_10} ####################################################################################### ## Call Waiting ## ####################################################################################### call_waiting.enable = {$yealink_call_waiting} call_waiting.tone = {$yealink_call_waiting_tone} call_waiting.on_code = call_waiting.off_code = ####################################################################################### ## Action URL ## ####################################################################################### action_url.setup_completed = action_url.registered = action_url.unregistered = action_url.register_failed = action_url.off_hook = action_url.on_hook = action_url.incoming_call = action_url.outgoing_call = action_url.call_established = action_url.dnd_on = action_url.dnd_off = action_url.always_fwd_on = action_url.always_fwd_off = action_url.busy_fwd_on = action_url.busy_fwd_off = action_url.no_answer_fwd_on = action_url.no_answer_fwd_off = action_url.transfer_call = action_url.blind_transfer_call = action_url.attended_transfer_call = action_url.hold = action_url.unhold = action_url.mute = action_url.unmute = action_url.missed_call = action_url.call_terminated = action_url.busy_to_idle = action_url.idle_to_busy = action_url.ip_change = action_url.forward_incoming_call = action_url.reject_incoming_call = action_url.answer_new_incoming_call = action_url.transfer_finished = action_url.transfer_failed = action_url.setup_autop_finish = action_url.held = action_url.unheld = #####V84SP4新需求加入####### action_url.peripheral_information= action_url.vpn_ip= ####################################################################################### ## Contact ## ####################################################################################### local_contact.data.url = local_contact.image.url = local_contact.icon.url = local_contact.data_photo_tar.url = local_contact.photo.url = static.directory_setting.url= https://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=favorite_setting.xml ####V84SP4新增#### directory.search_default_input_method= directory.search_type= {if isset($yealink_local_directory_enable)} directory_setting.local_directory.enable = {$yealink_local_directory_enable} {else} directory_setting.local_directory.enable = 1 {/if} directory_setting.local_directory.priority= search_in_dialing.local_directory.enable= search_in_dialing.local_directory.priority= phone_setting.contact_photo_display.enable= local_contact.icon_image.url= phone_setting.icon.delete= phone_setting.icon.url= local.dsskey_type_config.mode= local_contact.data.delete= local_contact.favorite.enable= phone_setting.favorite_sequence_type= phone_setting.search_t9.enable= ####################################################################################### ## Custom Factory Configuration ## ####################################################################################### static.custom_factory_configuration.url = static.features.custom_factory_config.enable = ####################################################################################### ## Custom Configuration ## ####################################################################################### static.configuration.url = ####################################################################################### ## Custom Softkey ## ####################################################################################### phone_setting.custom_softkey_enable = custom_softkey_call_failed.url = custom_softkey_call_in.url = custom_softkey_connecting.url = custom_softkey_ring_back.url = custom_softkey_talking.url = ####################################################################################### ## Configure the access URL of firmware ## ####################################################################################### ###It configures the access URL of the firmware file. ###The default value is blank.It takes effect after a reboot. static.firmware.url = {$yealink_firmware_url}/{$yealink_firmware_t54w} ####################################################################################### ## RTCP ## ####################################################################################### phone_setting.vq_rtcpxr.interval_report.enable = {$yealink_rtcpxr_interval_report_enable} phone_setting.vq_rtcpxr.session_report.enable = {$yealink_rtcpxr_report_enable} phone_setting.vq_rtcpxr.states_show_on_gui.enable = {$yealink_rtcpxr_show_gui_enable} phone_setting.vq_rtcpxr.states_show_on_web.enable = {$yealink_rtcpxr_show_web_enable} phone_setting.vq_rtcpxr_delay_threshold_critical = {$yealink_rtcpxr_delay_threshold_critical} phone_setting.vq_rtcpxr_delay_threshold_warning = {$yealink_rtcpxr_delay_threshold_warning} phone_setting.vq_rtcpxr_display_jitter.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_local_call_id.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_local_codec.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_moscq.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_moslq.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_packets_lost.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_remote_call_id.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_remote_codec.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_round_trip_delay.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_start_time.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_stop_time.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable = {$yealink_rtcpxr_disp_enable} phone_setting.vq_rtcpxr_interval_period = {$yealink_rtcpxr_interval} phone_setting.vq_rtcpxr_moslq_threshold_critical = {$yealink_rtcpxr_mos_threshold_critical} phone_setting.vq_rtcpxr_moslq_threshold_warning = {$yealink_rtcpxr_mos_threshold_warning} voice.rtcp.enable = {$yealink_rtcp_enable} voice.rtcp_xr.enable = {$yealink_rtcpxr_enable} voice.rtcp_cname = {$yealink_rtcp_cname} ####################################################################################### ## DNS ## ####################################################################################### dns_cache_a.1.name = dns_cache_a.1.ip = dns_cache_a.1.ttl = dns_cache_srv.1.name = dns_cache_srv.1.port = dns_cache_srv.1.priority = dns_cache_srv.1.target = dns_cache_srv.1.weight = dns_cache_srv.1.ttl = dns_cache_naptr.1.name = dns_cache_naptr.1.order = dns_cache_naptr.1.preference = dns_cache_naptr.1.replace = dns_cache_naptr.1.service = dns_cache_naptr.1.ttl = ####################################################################################### ## V80 Add ## ####################################################################################### ## Add Time 2015.6.26 static.network.attempt_expired_time = features.action_uri_force_autop = features.save_init_num_to_history.enable = 0 features.action_uri.enable = features.forward.emergency.enable = features.forward.emergency.authorized_number = features.auto_answer_tone.enable = features.ip_call.auto_answer.enable = action_url.headset = action_url.handfree action_url.cancel_callout = action_url.remote_busy = action_url.call_remote_canceled = action_url.call_waiting_on = action_url.call_waiting_off = sip.terminate_notify_sub_delay_time = voice.side_tone = static.security.default_access_level = ####################################################################################### ## Network WiFi ## ####################################################################################### ##static.wifi.X.label= ##static.wifi.X.ssid= ##static.wifi.X.priority= ##static.wifi.X.security_mode= ##static.wifi.X.cipher_type= ##static.wifi.X.password= ##static.wifi.X.eap_type= ##static.wifi.X.eap_user_name= ##static.wifi.x.eap_password= ##(X ranges from 1 to 5) static.wifi.enable = static.wifi.1.label = static.wifi.1.ssid = static.wifi.1.priority = static.wifi.1.security_mode = static.wifi.1.cipher_type = static.wifi.1.password = static.wifi.1.eap_type = static.wifi.1.eap_user_name = static.wifi.1.eap_password = ##V83 Add static.wifi.function.enable = ###V84SP4新需求新增##### static.network.wifi.internet_port.gateway= static.network.wifi.internet_port.ip= static.network.wifi.internet_port.mask= static.network.wifi.internet_port.type= static.network.wifi.ip_address_mode= static.network.wifi.ipv6_icmp_v6.enable= static.network.wifi.ipv6_internet_port.gateway= static.network.wifi.ipv6_internet_port.ip= static.network.wifi.ipv6_internet_port.type= static.network.wifi.ipv6_prefix= static.network.wifi.ipv6_primary_dns= static.network.wifi.ipv6_secondary_dns= static.network.wifi.ipv6_static_dns_enable= static.network.wifi.preference= static.network.wifi.primary_dns= static.network.wifi.secondary_dns= static.network.wifi.static_dns_enable= ####################################################################################### ## V80-SP2 Add ## ####################################################################################### ##Add Time 2016.5.26 features.power_saving.enable = {$yealink_ps_enabled} ##Written in minutes features.power_saving.office_hour.idle_timeout = {$yealink_ps_hour_timeout} features.power_saving.off_hour.idle_timeout = {$yealink_ps_offhour_timeout} features.power_saving.user_input_ext.idle_timeout = {$yealink_ps_idle_timeout} ##Written in 24hr, values should be comma delimited, e.g. 9,17 {if isset($yealink_ps_days_all)} features.power_saving.office_hour.monday = {$yealink_ps_days_all} features.power_saving.office_hour.tuesday = {$yealink_ps_days_all} features.power_saving.office_hour.wednesday = {$yealink_ps_days_all} features.power_saving.office_hour.thursday = {$yealink_ps_days_all} features.power_saving.office_hour.friday = {$yealink_ps_days_all} features.power_saving.office_hour.saturday = {$yealink_ps_days_all} features.power_saving.office_hour.sunday = {$yealink_ps_days_all} {elseif isset($yealink_ps_days_workweek)} features.power_saving.office_hour.monday = {$yealink_ps_days_workweek} features.power_saving.office_hour.tuesday = {$yealink_ps_days_workweek} features.power_saving.office_hour.wednesday = {$yealink_ps_days_workweek} features.power_saving.office_hour.thursday = {$yealink_ps_days_workweek} features.power_saving.office_hour.friday = {$yealink_ps_days_workweek} features.power_saving.office_hour.saturday = {$yealink_ps_day_saturday} features.power_saving.office_hour.sunday = {$yealink_ps_day_sunday} {else} features.power_saving.office_hour.monday = {$yealink_ps_day_monday} features.power_saving.office_hour.tuesday = {$yealink_ps_day_tuesday} features.power_saving.office_hour.wednesday = {$yealink_ps_day_wednesday} features.power_saving.office_hour.thursday = {$yealink_ps_day_thursday} features.power_saving.office_hour.friday = {$yealink_ps_day_friday} features.power_saving.office_hour.saturday = {$yealink_ps_day_saturday} features.power_saving.office_hour.sunday = {$yealink_ps_day_sunday} {/if} screensaver.wait_time = {$yealink_screensaver_wait} ##V83 Add features.power_saving.power_led_flash.off_time = {$yealink_ps_led_off} features.power_saving.power_led_flash.on_time = {$yealink_ps_led_on} screensaver.type = {$yealink_screensaver_type} ####################################################################################### ## Digitmap ## ####################################################################################### dialplan.digitmap.enable= dialplan.digitmap.string= dialplan.digitmap.no_match_action= dialplan.digitmap.interdigit_short_timer= dialplan.digitmap.interdigit_long_timer= dialplan.digitmap.apply_to.press_send= dialplan.digitmap.apply_to.forward= dialplan.digitmap.apply_to.history_dial= dialplan.digitmap.apply_to.directory_dial= dialplan.digitmap.apply_to.on_hook_dial= dialplan.digitmap.active.on_hook_dialing= #####V84SP4新增#### dialplan.transfer.mode= ##V83 Add dialplan.digitmap.apply_to.prefix_key = ####################################################################################### ## Emergency Dialplan ## ####################################################################################### dialplan.emergency.enable= dialplan.emergency.1.value= dialplan.emergency.server.1.address= dialplan.emergency.server.1.transport_type= dialplan.emergency.server.1.port= dialplan.emergency.1.server_priority= dialplan.emergency.custom_asserted_id= dialplan.emergency.asserted_id_source= #####V84SP4新增-E911#### ###(X ranges from 1 to 255.)######## ###dialplan.emergency.held.request_element.X.name=### ###dialplan.emergency.held.request_element.X.value=### dialplan.emergency.asserted_id.sip_account= dialplan.emergency.held.request_element.1.name= dialplan.emergency.held.request_element.1.value= dialplan.emergency.held.request_type= dialplan.emergency.held.secondary.server_url= dialplan.emergency.held.server_url= ####################################################################################### ## V81 Add ## ####################################################################################### static.auto_provision.flexible.enable = static.auto_provision.flexible.interval= static.auto_provision.flexible.begin_time = static.auto_provision.flexible.end_time = voice.jib.wifi.adaptive = voice.jib.wifi.min = voice.jib.wifi.max = voice.jib.wifi.normal = wui.quick_login = ##Multicast(X ranges from 1 to 31.) multicast.receive.use_speaker = multicast.listen_address.1.channel = multicast.paging_address.1.channel = features.keep_mute.enable = voice.tone.secondary_dial = ##Written in minutes features.power_saving.intelligent_mode = {$yealink_ps_intel_mode} features.blf_active_backlight.enable= {$yealink_blf_active_backlight} features.intercom.headset_prior.enable = ####################################################################################### ## Time&Date ## ####################################################################################### lcl.datetime.date.format = auto_dst.url = {$yealink_auto_dst_url} local_time.manual_time_enable = local_time.manual_ntp_srv_prior = local_time.time_format = {$yealink_time_format} local_time.date_format = {$yealink_date_format} local_time.dhcp_time = {$yealink_dhcp_time} local_time.summer_time = {$yealink_summer_time} local_time.dst_time_type = {$yealink_dst_type} local_time.start_time = {$yealink_time_zone_start_time} local_time.end_time = {$yealink_time_zone_end_time} local_time.offset_time = {$yealink_offset_time} local_time.interval = {$yealink_time_update} local_time.ntp_server1 = {$ntp_server_primary} local_time.ntp_server2 = {$ntp_server_secondary} local_time.time_zone = {$yealink_time_zone} local_time.time_zone_name = {$yealink_time_zone_name} ####V84SP4新需求新增####### lcl.datetime.date.format= ####################################################################################### ## Broadsoft ACD ## ####################################################################################### acd.enable= acd.auto_available_timer= ######V84SP4新增#### acd.available_fixed_display.enable= acd.disp_code_fixed_display.enable= acd.logout_fixed_display.enable= acd.trace_fixed_display.enable= features.homescreen_softkey.acd.enable= features.homescreen_softkey.acd.enable= ####################################################################################### ## Broadsoft Call Recording ## ####################################################################################### bw.call_recording.mode = ####################################################################################### ## Broadsoft Network Directory ## ####################################################################################### bw.calllog_and_dir = bw_phonebook.custom= bw_phonebook.enterprise_common_enable= bw_phonebook.enterprise_common_displayname= bw_phonebook.enterprise_enable= bw_phonebook.enterprise_displayname= bw_phonebook.group_common_enable= bw_phonebook.group_common_displayname= bw_phonebook.personal_enable= bw_phonebook.personal_displayname= bw_phonebook.group_enable= bw_phonebook.group_displayname = directory.update_time_interval ##V83 Add search_in_dialing.bw_directory.enable= search_in_dialing.bw_directory.priority= directory_setting.bw_directory.enable = directory_setting.bw_directory.priority = ####################################################################################### ## BSFT Setting ## ####################################################################################### bw.enable = ######V84SP4新需求加入####### bw.flexible_seating.remember_password.ldap.enable= bw.xsi.directory.alphabetized_by_lastname.enable= features.homescreen_softkey.hoteling.enable= features.homescreen_softkey.hoteling.enable= ####################################################################################### ## Broadsoft Visual Voice Mail ## ####################################################################################### bw.voice_mail.visual.enable= voice_mail.message_key.mode= bw.voice_mail.visual.display_videomail.enable= ####################################################################################### ## Broadsoft XSI ## ####################################################################################### bw.xsi.enable= sip.authentication_for_xsi = #####V84SP4新需求加入####### default_input_method.xsi_password= ####################################################################################### ## Features Sync ## ####################################################################################### call_waiting.mode = features.feature_key_sync.enable = {$yealink_feature_key_sync} features.dnd.feature_key_sync.local_processing.enable = features.dnd.feature_key_sync.enable = features.forward.feature_key_sync.enable= features.forward.feature_key_sync.local_processing.enable= ####################################################################################### ## Broadsoft Call Decline ## ####################################################################################### features.call_decline.enable = ####################################################################################### ## Call Park ## ####################################################################################### features.call_park.enable= features.call_park.park_mode= features.call_park.park_code= features.call_park.park_retrieve_code= features.call_park.park_visual_notify_enable= features.call_park.park_ring= features.call_park.group_enable= features.call_park.group_park_code= sip.call_park_without_blf= ####V84SP4新需求新增####### features.call_park.direct_send.enable= features.call_park.line_restriction.enable= features.call_park.park_mode= features.call_park.performby_holdhardkey.enable= features.parked_call_monitor.blf.ring_type= features.parked_call_monitor.blf_audio_enable= features.parked_call_monitor.blf_visual_enable= ####################################################################################### ## Broadsoft UC ## ####################################################################################### bw.xmpp.enable = features.uc_password = features.uc_username = bw.xmpp.presence_icon.mode = bw.xmpp.change_presence.force_manual.enable = bw.xmpp.change_presence.enable = features.uc_dir.match_tail_number= phone_setting.dsskey_directory_auto.enable= ##V83 Add directory_setting.bw_uc_buddies.enable = directory_setting.bw_uc_buddies.priority = search_in_dialing.bw_uc_buddies.enable = search_in_dialing.bw_uc_buddies.priority = ####################################################################################### ## Features Pickup ## ####################################################################################### features.pickup.group_pickup_enable = features.pickup.group_pickup_code = features.pickup.direct_pickup_enable = {$yealink_direct_pickup_enable} features.pickup.direct_pickup_code = ** features.pickup.blf_visual_enable = features.pickup.blf_audio_enable = ####V84SP4新需求新增####### features.pickup.blf_audio.list= features.pickup.blf_visual.list= features.pickup_display.method= ####################################################################################### ## Encryption ## ####################################################################################### static.auto_provision.encryption.config = ####################################################################################### ## Android phone-T58V/VP59 Add ## ####################################################################################### ##Add Time 2016.9.2 static.wifi.802_11e.enable = phone_setting.permit_silent_mode.enable = sip.h264.peer_resolution.default = ######doorphone.x(x ranges from 1 to 99)### ###features.doorphone.x.display_name = ###features.doorphone.x.full_screen = ###features.doorphone.x.phone_number = ###features.doorphone.x.send_audio = ###features.doorphone.x.send_video = ###features.doorphone.x.unlock_pin = ###features.doorphone.x.autopreview.enable = ###features.doorphone.x.httpapi.password = ###features.doorphone.x.httpapi.username = ###features.doorphone.x.video.stream.httpurl = ###features.doorphone.x.videopreview.enable = ###features.doorphone.x.device_model = features.doorphone.1.display_name = features.doorphone.1.full_screen = features.doorphone.1.phone_number = features.doorphone.1.send_audio = features.doorphone.1.send_video = features.doorphone.1.unlock_pin = features.doorphone.1.autopreview.enable = features.doorphone.1.httpapi.password = features.doorphone.1.httpapi.username = features.doorphone.1.video.stream.httpurl = features.doorphone.1.videopreview.enable = features.doorphone.1.device_model = features.doorphone.amount = features.csta_control.enable = static.network.ethernet_as_wifi.enable = static.security.default_ssl_method = {$yealink_security_default_ssl_method} features.video_call_bandwidth = video.enable = features.default_layout = ######V84新需求新增###### features.doorphone.X.autopreview_record.enable= features.doorphone.X.device_model= ####################################################################################### ## APP ## ####################################################################################### app.install_url = app.uninstall = {foreach $yealink_app_unavailable as $value}app.unavailable = {$value}{"\n"}{/foreach} app.autorun = pm.gms_install_url = pm.gms_uninstall = ####V84SP4新需求加入####### app.auto_arrange.enable= ####################################################################################### ## Broadsoft Emergency Call ## ####################################################################################### ##V83 Add bw.emergency_calling.enable = ####################################################################################### ## Broadsoft Network Calllog ## ####################################################################################### ##V83 Add bw.xsi.call_log.delete.enable = bw.xsi.call_log.multiple_accounts.enable = bw.xsi.call_log.enable= ####################################################################################### ## Broadsoft Network Directory ## ####################################################################################### bw.xsi.directory.enable= bw.xsi.directory.update.enable= ####################################################################################### ## EDK ## ####################################################################################### ##EDK Soft Keys(X ranges from 1 to 10) features.enhanced_dss_keys.enable= edk.id_mode.enable= softkey.X.position= softkey.X.use.conferenced= softkey.X.use.held= softkey.X.use.hold= softkey.X.use.transfer_ring_back= softkey.X.use.ring_back= softkey.X.use.call_failed= softkey.X.use.on_talk= softkey.X.use.transfer_connecting= softkey.X.use.connecting= softkey.X.use.incoming_call= softkey.X.use.idle= softkey.X.action= softkey.X.label= softkey.X.enable= edk.edklist.X.action= edk.edklist.X.mname= edk.edklist.X.enable= edk.edkprompt.X.enable= edk.edkprompt.X.label= edk.edkprompt.X.type= edk.edkprompt.X.userfeedback= edk.edkprompt.X.title = ####V84SP4新需求新增##### ###EDK Soft Keys(X ranges from 1 to 10) ###softkey.X.softkey_id= ###softkey.X.use.dialing= ###softkey.X.use.dialtone= softkey.1.softkey_id= softkey.1.use.dialing= softkey.1.use.dialtone= ####################################################################################### ## Voice Mail ## ####################################################################################### features.voice_mail_alert.enable= features.voice_mail_tone_enable= features.hide_feature_access_codes.enable = {$yealink_hide_feature_access_codes_enable} ####################################################################################### ## XML ## ####################################################################################### push_xml.server= push_xml.sip_notify= push_xml.block_in_calling= features.xml_browser.loading_tip.delay = #####V84SP4新增#### default_input_method.xml_browser_input_screen= features.xml_browser.pwd= features.xml_browser.user_name= hoteling.authentication_mode= push_xml.password= push_xml.phonebook.search.delay= push_xml.username= #####x ranges 1 to 5#### ###remote_phonebook.data.X.password= ###remote_phonebook.data.X.username= remote_phonebook.data.1.password= remote_phonebook.data.1.username= {if isset($yealink_remote_phonebook_2_name) } remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name} {else} remote_phonebook.data.2.name = Groups {/if} {if isset($yealink_remote_phonebook_2_url) } remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url} {else} remote_phonebook.data.2.url = https://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=groups {/if} {if isset($yealink_remote_phonebook_3_name) } remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name} {else} remote_phonebook.data.3.name = Extensions {/if} {if isset($yealink_remote_phonebook_3_url) } remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url} {else} remote_phonebook.data.3.url = https://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=extensions {/if} remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name} remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url} remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name} remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url} ####################################################################################### ## Features USB ## ####################################################################################### ##V83 Add static.usb.power.enable = static.usbdisk.function.enable = ####################################################################################### ## Acoustic Shield ## ####################################################################################### ##V83 Add features.acoustic_shield.level= features.acoustic_shield.mode= ####################################################################################### ## Google Contact ## ####################################################################################### ##V83 Add google_contact_server.enable= ####################################################################################### ## Camera ## ####################################################################################### camera.flicker = camera.status_bar_icon.enable= ##V83 Add static.camera.function.enable= ####################################################################################### ## Contact Other ## ####################################################################################### ##V83 Add phone_setting.search.highlight_keywords.enable = ####################################################################################### ## dsskey icon ## ####################################################################################### ##V83 Add dsskey.icon.url= dsskey.icon.delete= programablekey.1.icon= programablekey.2.icon= programablekey.3.icon= programablekey.4.icon= ####################################################################################### ## Call Recording ## ####################################################################################### features.usb_call_recording.enable= {$yealink_usb_record_enable} ####################################################################################### ## Log Backup ## ####################################################################################### static.auto_provision.local_log.backup.enable = static.auto_provision.local_log.backup.path = static.auto_provision.local_log.backup.upload_period = static.auto_provision.local_log.backup.append = static.auto_provision.local_log.backup.bootlog.upload_wait_time= static.auto_provision.local_log.backup.append.max_file_size = static.auto_provision.local_log.backup.append.limit_mode= ####################################################################################### ## Secure Domain List ## ####################################################################################### wui.secure_domain_list = ##V83 Add features.full_screen_in_call_enable= features.status_bar.hide= features.system_funtion_bar.hide= phone_setting.warnings_display.mode= phone_setting.browser.url= features.hide_world_clock.enable = ####V84SP4新增#### features.system_function_bar.hide= ####################################################################################### ## Dect ## ####################################################################################### ##V83 Add base.pin_code= static.base.repeater_mode.enable= base.pin_code_for_register= base.double_pin_code.enable= custom.handset.auto_answer.enable= custom.handset.auto_intercom= custom.handset.backlight_in_charger.enable= custom.handset.backlight_out_of_charger.enable= custom.handset.confirmation_tone.enable= custom.handset.date_format= custom.handset.eco_mode.enable=- custom.handset.keypad_light.enable= custom.handset.keypad_tone.enable= custom.handset.language= custom.handset.low_battery_tone.enable= custom.handset.missed_call_notify_light.enable= custom.handset.screen_saver.enable= custom.handset.time_format= custom.handset.voice_mail_notify_light.enable= custom.handset.wallpaper= handset.X.dial_out_default_line= handset.X.dial_out_lines= handset.X.hac.enable= handset.X.incoming_lines= handset.X.name= handset.X.contact_list.url= ## X rang from 1 to 5 over_the_air.base_trigger= over_the_air.handset_tip= over_the_air.handset_trigger= over_the_air.url= over_the_air.url.w52h= over_the_air.url.w56h= over_the_air.url.w53h= static.auto_provision.custom.handset.protect= static.auto_provision.handset_configured.enable= phone_setting.end_call_on_hook.enable= static.directory_setting.shared_contact.enable= shared_contact_list.url= features.ms.x.mode = features.ms.x.slave_handset_number = ####################################################################################### ## Metaswitch Setting-- EP包中配置，模板SP4开始去掉 ## ####################################################################################### ####################################################################################### ## Contact Backup ## ####################################################################################### static.auto_provision.local_contact.backup.path = static.auto_provision.local_contact.backup.enable= ####################################################################################### ## Call Configuration ## ####################################################################################### ######V84SP4新增#### default_input_method.dialing= features.auto_answer.first_call_only= features.auto_answer.ring_type= features.call.dialtone_time_out= features.call_out_history_by_off_hook.enable= features.conference.local.enable= features.conference.with_previous_call.enable= features.congestion_tone.codelist= features.custom_auto_answer_tone.enable= features.custom_softkey_dynamic.enable= features.handset_mode.enable= features.headset.ctrl_call.enable= features.headset_mode.enable= features.mute.autoanswer_mute.enable= features.no_answer_code= features.ignore_incoming_call.enable= features.play_held_tone.delay= features.play_held_tone.enable= features.play_held_tone.interval= features.play_hold_tone.interval= features.speaker_mode.enable= features.station_name.scrolling_display= features.station_name.value = features.transfer_keep_session2_after_failed.enable= force.voice.ring_vol = {$yealink_force_voice_ring_volume} phone_setting.incoming_call.horizontal_roll_interval= phone_setting.incoming_call.reject.enable= phone_setting.incoming_call_when_dialing.priority= {if isset($yealink_hold_or_swap_mode)}phone_setting.hold_or_swap.mode = {$yealink_hold_or_swap_mode}{else}phone_setting.hold_or_swap.mode = 0{/if} phone_setting.call_appearance.calls_per_linekey= phone_setting.call_appearance.conference_via_new_linekey= phone_setting.call_appearance.transfer_via_new_linekey={$yealink_transfer_via_new_linekey} phone_setting.call_display_name.mode= phone_setting.custom_softkey.apply_to_states= phone_setting.end_call_net_disconnect.enable= ####V84SP4新增-仅T58/VP59支持##### voice.handset.tia4965.enable = voice.headset.tia4965.enable = ####################################################################################### ## Genbend Setting ## ####################################################################################### ######V84SP4新需求新增#### directory_setting.gb_gab_directory.enable= directory_setting.gb_gab_directory.priority= directory_setting.gb_pab_directory.enable= directory_setting.gb_pab_directory.priority= directory_setting.presence_list.enable= directory_setting.presence_list.priority= search_in_dialing.gb_pab_directory.enable= search_in_dialing.gb_pab_directory.priority= gb.emergency_instant_messages.displaytimeout= gb.emergency_instant_messages.enable= features.emergency_instant_messages.ring_type= features.pab.enable features.pab.soupuser gb.presence.enable= gb.presence.line= gb.sopi.enable= gb.sopi.gab.enable= gb.sopi.gab.retain_search_filter= gb.sopi.pab.enable= gb.sopi.pab.match_in_calling.enable= gb.sopi.password= gb.sopi.service_url= gb.sopi.username= ####################################################################################### ## IME Settings ## ####################################################################################### ######V84SP4新需求新增##### gui_input_method.delete= gui_input_method.url= ####################################################################################### ## Codec ## ####################################################################################### ####V84SP4新需求新增#### voice.g726.aal2.enable= ####################################################################################### ## CP960特有的common配置 ## ####################################################################################### bluetooth.a2dp_sink= bluetooth.connect_confirm.enable= features.cp_star_connection.master.enable= features.cp_star_connection.master.mac= features.cp_star_connection.slave.X.mac= features.dect_mic.mute.mode= features.exit_dnd_mode_enable= features.play_mute_tone.enable= features.play_mute_tone.interval= static.network.port.max_rtpport= static.network.port.min_rtpport= ###shortcutkey(x ranges form 1 to 6) ###shortcutkey.X.icon= ###shortcutkey.X.label= ###shortcutkey.X.type= ###shortcutkey.X.value= shortcutkey.1.icon= shortcutkey.1.label= shortcutkey.1.type= shortcutkey.1.value= ####V85 add phone_setting.usb.pc_mode.audio_union= phone_setting.usb.pc_mode.default_conference= phone_setting.usb.pc_mode= ####################################################################################### ## V85 add ## ####################################################################################### auto_provision.allsettings.sync.path= auto_provision.allsettings.sync= bw.features.flash_time= bw.features_status.display_mode= bw.xsi.directory.server_search_type= dialplan.emergency.held.request_element.x.name= dialplan.emergency.held.request_element.x.value= dialplan.emergency.held.request_type= dialplan.emergency.held.secondary.server_url= dialplan.emergency.held.server_url= features.headset.group_listen_in_talking_enable= features.intercom.video.mute= features.noise_filtering_rev.enable= features.out_of_service_alert.enable= features.out_of_service_alert_time= features.paging_auto_resume.enable= features.recording_file.delete_method= features.recording_upload.enable= features.recording_upload.server.address= features.recording_upload.server.password= features.recording_upload.server.username= features.recording_upload_action= features.voice_mail_key_lamp_field.enable= hoteling.authorized_call.X.value= hoteling.http_request_server= hoteling.password= over_the_air.url.cp930w= phone_setting.autop_led_flash_enable= phone_setting.call_display_name.mode= phone_setting.call_remote_end_when_hold.busy_tone.enable= phone_setting.hide_dsskey.mode= phone_setting.idle_clock_display.enable= phone_setting.retain_pin.enable= phone_setting.voice.ring_vol_min= static.auto_provision.rsa_pri_key.delete= static.auto_provision.rsa_pri_key.enable= static.auto_provision.rsa_pri_key.url= static.network.l2tp_server.address= static.network.l2tp_server.password= static.network.l2tp_server.username= static.network.openvpn_file.url= static.network.pc_port.mode= static.network.set_fragment.enable= static.network.vpn.mode= static.wifi.x.802_1x.anonymous_identity= static.wifiap.channel= static.wifiap.dhcpd.mode= static.wifiap.dhcpd.segment= static.wifiap.enable= static.wifiap.generation= static.wifiap.password= static.wifiap.security_mode= static.wifiap.ssid= unify.enable= features.transfer_complete.prompt.enable = ####################################################################################### ## V86 add ## ####################################################################################### alarm.*.handset_stop.enable= alarm.*.name= alarm.*.pre_alarm.delay= alarm.*.pre_alarm.handset_stop.enable= alarm.*.ring.enable= alarm.*.trigger_delay= alarm.*.type= alarm.*.weekly.begin_time= alarm.*.weekly.dayofweek= alarm.*.weekly.end_time= alarm.server.address= alarm.server.expires= alarm.server.port= alarm.server.retry_counts= alarm.server.transport_type= ddp.*.features.pickup.blf_audio.list= ddp.*.features.pickup.blf_audio_enable= ddp.*.features.pickup.blf_visual.list= ddp.*.features.pickup.blf_visual_enable= ddp.*.linekey.*.extension= ddp.*.linekey.*.label= ddp.*.linekey.*.line= ddp.*.linekey.*.type= ddp.*.linekey.*.value= directory.containing_search.additional_sorting_mode= dm.enterprise_id= dm.site_id= features.accessibility.large_text.enable= features.analog_headset.mode= features.anonymous.feature_key_sync.enable= features.blf_key_state_display.enable= features.call_out_directory_by_off_hook.enable= features.caller_name_type_on_call= features.font.size= features.keep_mute.mode= features.missed_call_icon_event= features.network.8021x_upload.mode= features.transfer.mode= firmware.usb_headset.server= firmware.usb_headset.server.appid= firmware.usb_headset.server.special_num= firmware.usb_headset.url= gb.sopi.gab.default_search= gb.sopi.gab.default_search_keywords= gb.sopi.gab.default_search_type= handset.*.alarm.number= handset.*.alarm.template= static.network.dns_list.mode= static.network.wifi.dns_list.mode= over_the_air.url.t54w_dd10k= over_the_air.url.w59r= packet_capture.interface= phone_setting.called_party_info_display_method= phone_setting.fwd_and_dnd.suspension_prompt= phone_setting.headset_image.url= phone_setting.local_directory_order.type= phone_setting.message_call.rule= phone_setting.old_mail_display.enable= phone_setting.phone_lock.emergency.number_rule= phone_setting.recorder_tone.enable= phone_setting.vq_rtcpxr.min_callduration= phone_setting.wifi_security_check.enable= screensaver.xml_browser.url = {$yealink_screensaver_xml_url} static.security.802_1x.ca_cert= static.security.802_1x.cn_validation= static.security.802_1x.dev_cert= static.security.802_1x.ssl_method= static.security.802_1x.tls_cipher_list= static.security.802_1x.trust_certificates= static.security.auto_provision.ca_cert= static.security.auto_provision.cn_validation= static.security.auto_provision.dev_cert= static.security.auto_provision.ssl_method= static.security.auto_provision.tls_cipher_list= static.security.auto_provision.trust_certificates= static.security.dm.ca_cert= static.security.dm.cn_validation= static.security.dm.dev_cert= static.security.dm.ssl_method= static.security.dm.tls_cipher_list= static.security.dm.trust_certificates= static.security.ldap.ca_cert= static.security.remote_phonebook.ca_cert= static.security.remote_phonebook.cn_validation= static.security.remote_phonebook.dev_cert= static.security.remote_phonebook.ssl_method= static.security.remote_phonebook.tls_cipher_list= static.security.remote_phonebook.trust_certificates= static.security.sip.ca_cert= static.security.sip.cn_validation= static.security.sip.dev_cert= static.security.sip.ssl_method= static.security.sip.tls_cipher_list= static.security.sip.trust_certificates= static.security.sopi.ca_cert= static.security.sopi.cn_validation= static.security.sopi.dev_cert= static.security.sopi.ssl_method= static.security.sopi.tls_cipher_list= static.security.sopi.trust_certificates= static.security.tr069.ca_cert= static.security.tr069.cn_validation= static.security.tr069.dev_cert= static.security.tr069.ssl_method= static.security.tr069.tls_cipher_list= static.security.tr069.trust_certificates= static.security.web_limited_access_level= static.security.web_server.cn_validation= static.security.web_server.dev_cert= static.security.web_server.ssl_method= static.security.web_server.tls_cipher_list= static.security.web_server.trust_certificates= static.security.xml_browser.ca_cert= static.security.xml_browser.cn_validation= static.security.xml_browser.dev_cert= static.security.xml_browser.ssl_method= static.security.xml_browser.tls_cipher_list= static.static.security.xml_browser.trust_certificates= static.security.xmpp_xsi.ca_cert= static.security.xmpp_xsi.cn_validation= static.security.xmpp_xsi.dev_cert= static.security.xmpp_xsi.ssl_method= static.security.xmpp_xsi.tls_cipher_list= static.security.xmpp_xsi.trust_certificates= server_certificates.*.url= server_certificates.url= sip.emergency_call.mode= static.security.password_use_default.mode= voice.intercom.tone_vol= wifiap.brocast_ssid=1 xmlbrowser_icon.delete= xmlbrowser_icon_upload.url= ####################################################################################### ## T58W add ## ####################################################################################### features.lower_your_voice_alarm.enable=