#!version:1.0.0.1 REV70 ##File header "#!version:1.0.0.1" can not be edited or deleted.## ####################################################################################### ## Account1 Settings ## ####################################################################################### #Enable or disable the account 1; 0-Disabled (default), 1-Enabled; account.1.enable = 1 #Configure the label displayed on the LCD screen for account 1. account.1.label = {$display_name_1} #Configure the display name of account 1. account.1.display_name = {$display_name_1} #Configure the username and password for register authentication. account.1.auth_name = {$auth_id_1} account.1.password = {$user_password_1} #Configure the register user name. account.1.user_name = {$user_id_1} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; account.1.sip_trust_ctrl = 1 #Configure the SIP server address. account.1.sip_server_host = {$server_address_1} #Specify the port for the SIP server. The default value is 5060. account.1.sip_server_port = {$sip_port_1} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.1.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. account.1.outbound_host = {$outbound_proxy_1} #Specify the server port, the default value is 5060. account.1.outbound_port = #Specify the IP address or domain name of the backup SIP server. #Require reboot; account.1.backup_sip_server_host = #Specify the backup SIP server port, the default value is 5060. #Require reboot; account.1.backup_sip_server_port = account.1.sip_server_host_readonly = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; {if $sip_transport_1 == 'udp'}account.1.transport = 0{/if} {if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if} {if $sip_transport_1 == 'tls'}account.1.transport = 2{/if} {if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.1.backup_outbound_host = #Specify the port of the backup outbound proxy server, the default value is 5060. account.1.backup_outbound_port = #Configure the voice mail number of account 1. voice_mail.number.1 = *97 #Configure the proxy server to account 1. account.1.proxy_require = #Configure the call mode; 0-Voice, 1-Video (default); account.1.call_option.call_mode = #Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); account.1.call_option.local_video_enable = #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.1.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.1.anonymous_call_oncode = account.1.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.1.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.1.anonymous_reject_oncode = account.1.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.1.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.1.expires = {$register_expires_1} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.1.100rel_enable = #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.1.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.1.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.1.subscribe_mwi = #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.1.subscribe_mwi_expires = #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.1.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.1.cp_source = #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.1.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.1.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.1.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.1.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.1.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.1.ptime = #Assign account 1 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; account.1.shared_line = #Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. account.1.bla_number = account.1.bla_subscribe_period = #Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; account.1.dialoginfo_callpickup = #Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; account.1.auto_answer = #Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); account.1.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.1.subscribe_mwi_to_vm = #Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled; account.1.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.1.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.1.reg_fail_retry_interval = #Configure the conference type; 0-Local (default), 2-Network Conference; account.1.conf_type = #Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". account.1.conf_uri = #Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". account.1.blf.blf_list_uri = #Configure the BLF subscribe period (in seconds), the default value is 1800. account.1.blf.subscribe_period = #Configure the pickup code of BLF List. account.1.blf_list_code = #Configure the bargein code. account.1.blf_list_barge_in_code = #Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; account.1.sip_server_type = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.1.enable_signal_encode = #Configure the key for encoding. account.1.signal_encode_key = #Configure the music on hold server; account.1.music_server_uri = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.1.dtmf.type = #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.1.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.1.dtmf.info_type = #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; account.1.compact_header_enable = #Enable or disable the ACD feature on account 1; 0-Disabled (default), 1-Enable; account.1.acd.enable = #Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; account.1.acd.available = #Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); account.1.acd.initial_state = #Configure the user ID and password to login the ACD system. account.1.acd.user_id = account.1.acd.password = #Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); account.1.acd.auto_login_enable = #Configure the unavailable reason and unavailable reason code. account.1.acd.unavailable_reason = account.1.acd.reason_code.code = #Enable or disable the hoteling feature on account 1; 0-Disabled (default), 1-Enabled; #Require reboot; account.1.hoteling.enable = #Configure the hoteling user ID and password. #Require reboot; account.1.hoteling.user_id = account.1.hoteling.password = #Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; #Require reboot; account.1.hoteling.auto_login_enable = ######################################################################### ## NAT Settings ## ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.1.nat.nat_traversal = #Configure the STUN server address. account.1.nat.stun_server = #Configure the STUN server port, the default value is 3478. account.1.nat.stun_port = #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.1.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.1.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.1.nat.rport = #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = account.1.advanced.timer_t2 = account.1.advanced.timer_t4 = #Configure the audio and video attributes. account.1.advanced.audio_bandwidth = 0 account.1.advanced.video_frame_rate = 25 account.1.advanced.video_i_frame_refresh_time = 30 account.1.advanced.video_bandwidth = 0 account.1.advanced.total_bandwidth = 0 #Assign a ringtone for account 1. The system ring tones are: common (default), Ring1.wav, Ring2.wav,¡­¡­Ring8.wav. #If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav #If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav account.1.ringtone.ring_type = #Audio codecs for account 1 (Y ranges from 1 to 7). #account.1.codec.y.enable = #account.1.codec.y.payload_type = #account.1.codec.y.priority = #account.1.codec.y.rtpmap = account.1.codec.1.enable = 1 account.1.codec.1.payload_type = PCMU account.1.codec.1.priority = 2 account.1.codec.1.rtpmap = 8 account.1.codec.2.enable = 1 account.1.codec.2.payload_type = PCMA account.1.codec.2.priority = 1 account.1.codec.2.rtpmap = 0 account.1.codec.3.enable = 1 account.1.codec.3.payload_type = G729 account.1.codec.3.priority =3 account.1.codec.3.rtpmap = 18 account.1.codec.4.enable = 1 account.1.codec.4.payload_type = G722 account.1.codec.4.priority = 4 account.1.codec.4.rtpmap = 9 account.1.codec.5.enable = 0 account.1.codec.5.payload_type = G723 account.1.codec.5.priority = 5 account.1.codec.5.rtpmap = 4 account.1.codec.6.enable = 0 account.1.codec.6.payload_type = AACLC account.1.codec.6.priority = 6 account.1.codec.6.rtpmap = 102 account.1.codec.7.enable = 0 account.1.codec.7.payload_type = iLBC account.1.codec.7.priority = 7 account.1.codec.7.rtpmap = 122 #Video codecs for account 1 (X ranges from 1 to 3) #account.1.video_codec.xxxxx.enable = #account.1.video_codec.x.priority = #account.1.video_codec.x.payload_type = #account.1.video_codec.x.rtpmap = #account.1.video_codec.x.para = account.1.video_codec.1.enable = 1 account.1.video_codec.1.priority = 1 account.1.video_codec.1.payload_type = H264 account.1.video_codec.1.rtpmap = 99 account.1.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 account.1.video_codec.2.enable = 1 account.1.video_codec.2.priority = 2 account.1.video_codec.2.payload_type = H263 account.1.video_codec.2.rtpmap = 34 account.1.video_codec.2.para = CIF=1; QCIF=1 account.1.video_codec.3.enable = 1 account.1.video_codec.3.priority = 3 account.1.video_codec.3.payload_type = mp4v-es account.1.video_codec.3.rtpmap = 102 account.1.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 ####################################################################################### ## Account2 Settings ## ####################################################################################### #Enable or disable the account 2; 0-Disabled (default), 1-Enabled; account.2.enable = 1 #Configure the label displayed on the LCD screen for account 2. account.2.label = {$display_name_2} #Configure the display name of account 2. account.2.display_name = {$display_name_2} #Configure the username and password for register authentication. account.2.auth_name = {$auth_id_2} account.2.password = {$user_password_2} #Configure the register user name. account.2.user_name = {$user_id_2} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; account.2.sip_trust_ctrl = #Configure the SIP server address. account.2.sip_server_host = {$server_address_2} #Specify the port for the SIP server. The default value is 5060. account.2.sip_server_port = {$sip_port_2} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.2.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. account.2.outbound_host = #Specify the server port, the default value is 5060. account.2.outbound_port = #Specify the IP address or domain name of the backup SIP server. #Require reboot; account.2.backup_sip_server_host = #Specify the backup SIP server port, the default value is 5060. #Require reboot; account.2.backup_sip_server_port = account.2.sip_server_host_readonly = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; {if $sip_transport_2 == 'udp'}account.2.transport = 0{/if} {if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if} {if $sip_transport_2 == 'tls'}account.2.transport = 2{/if} {if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.2.backup_outbound_host = #Specify the port of the backup outbound proxy server, the default value is 5060. account.2.backup_outbound_port = #Configure the voice mail number of account 2. voice_mail.number.2 = *97 #Configure the proxy server to account 2. account.2.proxy_require = #Configure the call mode; 0-Voice, 1-Video (default); account.2.call_option.call_mode = #Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); account.2.call_option.local_video_enable = #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.2.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.2.anonymous_call_oncode = account.2.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.2.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.2.anonymous_reject_oncode = account.2.anonymous_reject_offcode = #Configure the SIP port for account 2, the default value is 5060. account.2.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.2.expires = {$register_expires_2} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.2.100rel_enable = #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.2.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.2.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi = #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.2.subscribe_mwi_expires = #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.2.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.2.cp_source = #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.2.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.2.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.2.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.2.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.2.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.2.ptime = #Assign account 2 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; account.2.shared_line = #Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. account.2.bla_number = account.2.bla_subscribe_period = #Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; account.2.dialoginfo_callpickup = #Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; account.2.auto_answer = #Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); account.2.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi_to_vm = #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.2.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.2.register_line = #Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30. account.2.reg_fail_retry_interval = #Configure the conference type; 0-Local (default), 2-Network Conference; account.2.conf_type = #Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". account.2.conf_uri = #Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". account.2.blf.blf_list_uri = #Configure the BLF subscribe period (in seconds), the default value is 1800. account.2.blf.subscribe_period = #Configure the pickup code of BLF List. account.2.blf_list_code = #Configure the bargein code. account.2.blf_list_barge_in_code = #Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; account.2.sip_server_type = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.2.enable_signal_encode = #Configure the key for encoding. account.2.signal_encode_key = #Configure the music on hold server; account.2.music_server_uri = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.2.dtmf.type = #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.2.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.2.dtmf.info_type = #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; account.2.compact_header_enable = #Enable or disable the ACD feature on account 2; 0-Disabled (default), 1-Enable; account.2.acd.enable = #Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; account.2.acd.available = #Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); account.2.acd.initial_state = #Configure the user ID and password to login the ACD system. account.2.acd.user_id = account.2.acd.password = #Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); account.2.acd.auto_login_enable = #Configure the unavailable reason and unavailable reason code. account.2.acd.unavailable_reason = account.2.acd.reason_code.code = #Enable or disable the hoteling feature on account 2; 0-Disabled (default), 1-Enabled; #Require reboot; account.2.hoteling.enable = #Configure the hoteling user ID and password. #Require reboot; account.2.hoteling.user_id = account.2.hoteling.password = #Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; #Require reboot; account.2.hoteling.auto_login_enable = ######################################################################### ## NAT Settings ## ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.2.nat.nat_traversal = #Configure the STUN server address. account.2.nat.stun_server = #Configure the STUN server port, the default value is 3478. account.2.nat.stun_port = #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.2.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.2.nat.rport = #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = account.2.advanced.timer_t2 = account.2.advanced.timer_t4 = #Configure the audio and video attributes. account.2.advanced.audio_bandwidth = 0 account.2.advanced.video_frame_rate = 25 account.2.advanced.video_i_frame_refresh_time = 30 account.2.advanced.video_bandwidth = 0 account.2.advanced.total_bandwidth = 0 #Assign a ringtone for account 2. The system ring tones are: common (default), Ring1.wav, Ring2.wav,¡­¡­Ring8.wav. #If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav #If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav account.2.ringtone.ring_type = #Audio codecs for account 2 (Y ranges from 1 to 7). #account.2.codec.y.enable = #account.2.codec.y.payload_type = #account.2.codec.y.priority = #account.2.codec.y.rtpmap = account.2.codec.1.enable = 1 account.2.codec.1.payload_type = PCMU account.2.codec.1.priority = 2 account.2.codec.1.rtpmap = 8 account.2.codec.2.enable = 1 account.2.codec.2.payload_type = PCMA account.2.codec.2.priority = 1 account.2.codec.2.rtpmap = 0 account.2.codec.3.enable = 1 account.2.codec.3.payload_type = G729 account.2.codec.3.priority =3 account.2.codec.3.rtpmap = 18 account.2.codec.4.enable = 1 account.2.codec.4.payload_type = G722 account.2.codec.4.priority = 4 account.2.codec.4.rtpmap = 9 account.2.codec.5.enable = 0 account.2.codec.5.payload_type = G723 account.2.codec.5.priority = 5 account.2.codec.5.rtpmap = 4 account.2.codec.6.enable = 0 account.2.codec.6.payload_type = AACLC account.2.codec.6.priority = 6 account.2.codec.6.rtpmap = 102 account.2.codec.7.enable = 0 account.2.codec.7.payload_type = iLBC account.2.codec.7.priority = 7 account.2.codec.7.rtpmap = 122 #Video codecs for account 2 (X ranges from 1 to 3) #account.2.video_codec.xxxxx.enable = #account.2.video_codec.x.priority = #account.2.video_codec.x.payload_type = #account.2.video_codec.x.rtpmap = #account.2.video_codec.x.para = account.2.video_codec.1.enable = 1 account.2.video_codec.1.priority = 1 account.2.video_codec.1.payload_type = H264 account.2.video_codec.1.rtpmap = 99 account.2.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 account.2.video_codec.2.enable = 1 account.2.video_codec.2.priority = 2 account.2.video_codec.2.payload_type = H263 account.2.video_codec.2.rtpmap = 34 account.2.video_codec.2.para = CIF=1; QCIF=1 account.2.video_codec.3.enable = 1 account.2.video_codec.3.priority = 3 account.2.video_codec.3.payload_type = mp4v-es account.2.video_codec.3.rtpmap = 102 account.2.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 ####################################################################################### ## Account3 Settings ## ####################################################################################### #Enable or disable the account 3; 0-Disabled (default), 1-Enabled; account.3.enable = #Configure the label displayed on the LCD screen for account 3. account.3.label = {$display_name_3} #Configure the display name of account 3. account.3.display_name = {$display_name_3} #Configure the username and password for register authentication. account.3.auth_name = {$auth_id_3} account.3.password = {$user_password_3} #Configure the register user name. account.3.user_name = {$user_id_3} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; account.3.sip_trust_ctrl = 1 #Configure the SIP server address. account.3.sip_server_host = {$server_address_3} #Specify the port for the SIP server. The default value is 5060. account.3.sip_server_port = {$sip_port_3} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.3.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. account.3.outbound_host = {$outbound_proxy_3} #Specify the server port, the default value is 5060. account.3.outbound_port = #Specify the IP address or domain name of the backup SIP server. #Require reboot; account.3.backup_sip_server_host = #Specify the backup SIP server port, the default value is 5060. #Require reboot; account.3.backup_sip_server_port = account.3.sip_server_host_readonly = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; {if $sip_transport_3 == 'udp'}account.3.transport = 0{/if} {if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if} {if $sip_transport_3 == 'tls'}account.3.transport = 2{/if} {if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.3.backup_outbound_host = #Specify the port of the backup outbound proxy server, the default value is 5060. account.3.backup_outbound_port = #Configure the voice mail number of account 3. voice_mail.number.3 = #Configure the proxy server to account 3. account.3.proxy_require = #Configure the call mode; 0-Voice, 1-Video (default); account.3.call_option.call_mode = #Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); account.3.call_option.local_video_enable = #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.3.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.3.anonymous_call_oncode = account.3.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.3.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.3.anonymous_reject_oncode = account.3.anonymous_reject_offcode = #Configure the SIP port for account 3, the default value is 5060. account.3.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.3.expires = {$register_expires_3} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.3.100rel_enable = #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.3.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.3.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.3.subscribe_mwi = #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.3.subscribe_mwi_expires = #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.3.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.3.cp_source = #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.3.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.3.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.3.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.3.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.3.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.3.ptime = #Assign account 3 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; account.3.shared_line = #Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. account.3.bla_number = account.3.bla_subscribe_period = #Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; account.3.dialoginfo_callpickup = #Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; account.3.auto_answer = #Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); account.3.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.3.subscribe_mwi_to_vm = #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.3.register_mac = #Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); account.3.register_line = #Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30. account.3.reg_fail_retry_interval = #Configure the conference type; 0-Local (default), 2-Network Conference; account.3.conf_type = #Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". account.3.conf_uri = #Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". account.3.blf.blf_list_uri = #Configure the BLF subscribe period (in seconds), the default value is 1800. account.3.blf.subscribe_period = #Configure the pickup code of BLF List. account.3.blf_list_code = #Configure the bargein code. account.3.blf_list_barge_in_code = #Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; account.3.sip_server_type = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.3.enable_signal_encode = #Configure the key for encoding. account.3.signal_encode_key = #Configure the music on hold server; account.3.music_server_uri = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.3.dtmf.type = #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.3.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.3.dtmf.info_type = #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; account.3.compact_header_enable = #Enable or disable the ACD feature on account 3; 0-Disabled (default), 1-Enable; account.3.acd.enable = #Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; account.3.acd.available = #Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); account.3.acd.initial_state = #Configure the user ID and password to login the ACD system. account.3.acd.user_id = account.3.acd.password = #Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); account.3.acd.auto_login_enable = #Configure the unavailable reason and unavailable reason code. account.3.acd.unavailable_reason = account.3.acd.reason_code.code = #Enable or disable the hoteling feature on account 3; 0-Disabled (default), 1-Enabled; #Require reboot; account.3.hoteling.enable = #Configure the hoteling user ID and password. #Require reboot; account.3.hoteling.user_id = account.3.hoteling.password = #Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; #Require reboot; account.3.hoteling.auto_login_enable = ######################################################################### ## NAT Settings ## ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.3.nat.nat_traversal = #Configure the STUN server address. account.3.nat.stun_server = #Configure the STUN server port, the default value is 3478. account.3.nat.stun_port = #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.3.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.3.nat.rport = #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = account.3.advanced.timer_t2 = account.3.advanced.timer_t4 = #Configure the audio and video attributes. account.3.advanced.audio_bandwidth = 0 account.3.advanced.video_frame_rate = 25 account.3.advanced.video_i_frame_refresh_time = 30 account.3.advanced.video_bandwidth = 0 account.3.advanced.total_bandwidth = 0 #Assign a ringtone for account 3. The system ring tones are: common (default), Ring1.wav, Ring2.wav,¡­¡­Ring8.wav. #If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav #If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav account.3.ringtone.ring_type = #Audio codecs for account 3 (Y ranges from 1 to 7). #account.3.codec.y.enable = #account.3.codec.y.payload_type = #account.3.codec.y.priority = #account.3.codec.y.rtpmap = account.3.codec.1.enable = 1 account.3.codec.1.payload_type = PCMU account.3.codec.1.priority = 2 account.3.codec.1.rtpmap = 8 account.3.codec.2.enable = 1 account.3.codec.2.payload_type = PCMA account.3.codec.2.priority = 1 account.3.codec.2.rtpmap = 0 account.3.codec.3.enable = 1 account.3.codec.3.payload_type = G729 account.3.codec.3.priority =3 account.3.codec.3.rtpmap = 18 account.3.codec.4.enable = 1 account.3.codec.4.payload_type = G722 account.3.codec.4.priority = 4 account.3.codec.4.rtpmap = 9 account.3.codec.5.enable = 0 account.3.codec.5.payload_type = G723 account.3.codec.5.priority = 5 account.3.codec.5.rtpmap = 4 account.3.codec.6.enable = 0 account.3.codec.6.payload_type = AACLC account.3.codec.6.priority = 6 account.3.codec.6.rtpmap = 102 account.3.codec.7.enable = 0 account.3.codec.7.payload_type = iLBC account.3.codec.7.priority = 7 account.3.codec.7.rtpmap = 122 #Video codecs for account 3 (X ranges from 1 to 3) #account.3.video_codec.xxxxx.enable = #account.3.video_codec.x.priority = #account.3.video_codec.x.payload_type = #account.3.video_codec.x.rtpmap = #account.3.video_codec.x.para = account.3.video_codec.1.enable = 1 account.3.video_codec.1.priority = 1 account.3.video_codec.1.payload_type = H264 account.3.video_codec.1.rtpmap = 99 account.3.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 account.3.video_codec.2.enable = 1 account.3.video_codec.2.priority = 2 account.3.video_codec.2.payload_type = H263 account.3.video_codec.2.rtpmap = 34 account.3.video_codec.2.para = CIF=1; QCIF=1 account.3.video_codec.3.enable = 1 account.3.video_codec.3.priority = 3 account.3.video_codec.3.payload_type = mp4v-es account.3.video_codec.3.rtpmap = 102 account.3.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 ####################################################################################### ## Account4 Settings ## ####################################################################################### #Enable or disable the account 4; 0-Disabled (default), 1-Enabled; account.4.enable = #Configure the label displayed on the LCD screen for account 4. account.4.label = {$display_name_4} #Configure the display name of account 4. account.4.display_name = {$display_name_4} #Configure the username and password for register authentication. account.4.auth_name = {$auth_id_4} account.4.password = {$user_password_4} #Configure the register user name. account.4.user_name = {$user_id_4} #Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled; account.4.sip_trust_ctrl = 1 #Configure the SIP server address. account.4.sip_server_host = {$server_address_4} #Specify the port for the SIP server. The default value is 5060. account.4.sip_server_port = {$sip_port_4} #Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled; account.4.outbound_proxy_enable = #Specify the IP address or domain name of the outbound proxy server. account.4.outbound_host = {$outbound_proxy_4} #Specify the server port, the default value is 5060. account.4.outbound_port = #Specify the IP address or domain name of the backup SIP server. #Require reboot; account.4.backup_sip_server_host = #Specify the backup SIP server port, the default value is 5060. #Require reboot; account.4.backup_sip_server_port = account.4.sip_server_host_readonly = #Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV; {if $sip_transport_4== 'udp'}account.4.transport = 0{/if} {if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if} {if $sip_transport_4 == 'tls'}account.4.transport = 2{/if} {if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if} #Configure the address of the backup outbound proxy server. account.4.backup_outbound_host = #Specify the port of the backup outbound proxy server, the default value is 5060. account.4.backup_outbound_port = #Configure the voice mail number of account 4. voice_mail.number.4 = #Configure the proxy server to account 4. account.4.proxy_require = #Configure the call mode; 0-Voice, 1-Video (default); account.4.call_option.call_mode = #Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default); account.4.call_option.local_video_enable = #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.4.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.4.anonymous_call_oncode = account.4.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.4.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.4.anonymous_reject_oncode = account.4.anonymous_reject_offcode = #Configure the SIP port for account 4, the default value is 5060. account.4.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.4.expires = {$register_expires_4} #Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled; account.4.100rel_enable = #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.4.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.4.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.4.subscribe_mwi = #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.4.subscribe_mwi_expires = #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.4.cid_source = #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.4.cp_source = #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.4.session_timer.enable = #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.4.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.4.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.4.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.4.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.4.ptime = #Assign account 4 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance; account.4.shared_line = #Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300. account.4.bla_number = account.4.bla_subscribe_period = #Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled; account.4.dialoginfo_callpickup = #Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled; account.4.auto_answer = #Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default); account.4.missed_calllog = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.4.subscribe_mwi_to_vm = #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.4.register_mac = #Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default); account.4.register_line = #Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30. account.4.reg_fail_retry_interval = #Configure the conference type; 0-Local (default), 2-Network Conference; account.4.conf_type = #Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference". account.4.conf_uri = #Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist". account.4.blf.blf_list_uri = #Configure the BLF subscribe period (in seconds), the default value is 1800. account.4.blf.subscribe_period = #Configure the pickup code of BLF List. account.4.blf_list_code = #Configure the bargein code. account.4.blf_list_barge_in_code = #Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft; account.4.sip_server_type = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.4.enable_signal_encode = #Configure the key for encoding. account.4.signal_encode_key = #Configure the music on hold server; account.4.music_server_uri = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.4.dtmf.type = #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.4.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.4.dtmf.info_type = #Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled; account.4.compact_header_enable = #Enable or disable the ACD feature on account 4; 0-Disabled (default), 1-Enable; account.4.acd.enable = #Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable; account.4.acd.available = #Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default); account.4.acd.initial_state = #Configure the user ID and password to login the ACD system. account.4.acd.user_id = account.4.acd.password = #Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default); account.4.acd.auto_login_enable = #Configure the unavailable reason and unavailable reason code. account.4.acd.unavailable_reason = account.4.acd.reason_code.code = #Enable or disable the hoteling feature on account 4; 0-Disabled (default), 1-Enabled; #Require reboot; account.4.hoteling.enable = #Configure the hoteling user ID and password. #Require reboot; account.4.hoteling.user_id = account.4.hoteling.password = #Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled; #Require reboot; account.4.hoteling.auto_login_enable = ######################################################################### ## NAT Settings ## ######################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.4.nat.nat_traversal = #Configure the STUN server address. account.4.nat.stun_server = #Configure the STUN server port, the default value is 3478. account.4.nat.stun_port = #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.4.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.4.nat.rport = #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = account.4.advanced.timer_t2 = account.4.advanced.timer_t4 = #Configure the audio and video attributes. account.4.advanced.audio_bandwidth = 0 account.4.advanced.video_frame_rate = 25 account.4.advanced.video_i_frame_refresh_time = 30 account.4.advanced.video_bandwidth = 0 account.4.advanced.total_bandwidth = 0 #Assign a ringtone for account 4. The system ring tones are: common (default), Ring1.wav, Ring2.wav,¡­¡­Ring8.wav. #If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav #If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav account.4.ringtone.ring_type = #Audio codecs for account 4 (Y ranges from 1 to 7). #account.4.codec.y.enable = #account.4.codec.y.payload_type = #account.4.codec.y.priority = #account.4.codec.y.rtpmap = account.4.codec.1.enable = 1 account.4.codec.1.payload_type = PCMU account.4.codec.1.priority = 2 account.4.codec.1.rtpmap = 8 account.4.codec.2.enable = 1 account.4.codec.2.payload_type = PCMA account.4.codec.2.priority = 1 account.4.codec.2.rtpmap = 0 account.4.codec.3.enable = 1 account.4.codec.3.payload_type = G729 account.4.codec.3.priority =3 account.4.codec.3.rtpmap = 18 account.4.codec.4.enable = 1 account.4.codec.4.payload_type = G722 account.4.codec.4.priority = 4 account.4.codec.4.rtpmap = 9 account.4.codec.5.enable = 0 account.4.codec.5.payload_type = G723 account.4.codec.5.priority = 5 account.4.codec.5.rtpmap = 4 account.4.codec.6.enable = 0 account.4.codec.6.payload_type = AACLC account.4.codec.6.priority = 6 account.4.codec.6.rtpmap = 102 account.4.codec.7.enable = 0 account.4.codec.7.payload_type = iLBC account.4.codec.7.priority = 7 account.4.codec.7.rtpmap = 122 #Video codecs for account 4 (X ranges from 1 to 3) #account.4.video_codec.xxxxx.enable = #account.4.video_codec.x.priority = #account.4.video_codec.x.payload_type = #account.4.video_codec.x.rtpmap = #account.4.video_codec.x.para = account.4.video_codec.1.enable = 1 account.4.video_codec.1.priority = 1 account.4.video_codec.1.payload_type = H264 account.4.video_codec.1.rtpmap = 99 account.4.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880 account.4.video_codec.2.enable = 1 account.4.video_codec.2.priority = 2 account.4.video_codec.2.payload_type = H263 account.4.video_codec.2.rtpmap = 34 account.4.video_codec.2.para = CIF=1; QCIF=1 account.4.video_codec.3.enable = 1 account.4.video_codec.3.priority = 3 account.4.video_codec.3.payload_type = mp4v-es account.4.video_codec.3.rtpmap = 102 account.4.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; forward.always.enable = #Configure the target number that the phone will forward the call to. forward.always.target = #Configure the on/off code for always forward; forward.always.on_code = forward.always.off_code = #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; forward.busy.enable = forward.busy.target = forward.busy.on_code = forward.busy.off_code = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); forward.no_answer.enable = forward.no_answer.target = forward.no_answer.timeout = forward.no_answer.on_code = forward.no_answer.off_code = ####################################################################################### ## Line Key ## ####################################################################################### #The x of the parameter "linekey.x.line" ranges from 1 to 6. #The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1. #linekey.x.lable--Define the label for each line key. {foreach $keys as $row} {if $row.device_key_category == "line"} #Configure Line Key {$row.device_key_id} linekey.{$row.device_key_id}.line = {$row.device_key_line} linekey.{$row.device_key_id}.value = {$row.device_key_value} linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} linekey.{$row.device_key_id}.type = {$row.device_key_type} linekey.{$row.device_key_id}.xml_phonebook = linekey.{$row.device_key_id}.label = {$row.device_key_label} {/if} {/foreach} ####################################################################################### ## Memory Key (For T38G only) ## ####################################################################################### #X ranges from 1 to 10; #memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. #The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line. #But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1. #memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user. #memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF. #memorykey.x.type--Assign the desired feature to the memory key. #Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS # 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL # 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser # 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group #memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #memorykey.x.sub_type = {foreach $keys as $row} {if $row.device_key_category == "memory"} #Expansion Memory Key {$row.device_key_id} memorykey.{$row.device_key_id}.type = {$row.device_key_type} memorykey.{$row.device_key_id}.line = {$row.device_key_line} memorykey.{$row.device_key_id}.value = {$row.device_key_value} memorykey.{$row.device_key_id}.pickup_value = {$row.device_key_extension} memorykey.{$row.device_key_id}.label = {$row.device_key_label} memorykey.{$row.device_key_id}.xml_phonebook = memorykey.{$row.device_key_id}.sub_type = {/if} {/foreach} ########################################################################################## ## Programmable Key (For T38G only) ## ########################################################################################## #X ranges from 1 to 15. #programablekey.x.type--Customize the programmable key type. #The valid types are: #0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom #22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook #44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock #programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6. #The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line. #But, when the programmable key is configured as Pick Up, the value 0 stands for line 1. #programablekey.x.value = #programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group. #programablekey.x.history_type = #programablekey.x.label--This parameter is only available to the key 1 to key 4. programablekey.1.type = programablekey.1.line = programablekey.1.value = programablekey.1.xml_phonebook = programablekey.1.history_type = programablekey.1.label = ########################################################################################## ## Expansion Module 1 ## ########################################################################################## #X ranges from 1 to 16, Y ranges from 1 to 40. #expansion_module.x.key.y.type = 37 (Switch by default) #expansion_module.x.key.y.line = 0 #expansion_module.x.key.y.value = #expansion_module.x.key.y.pickup_value = #expansion_module.x.key.y.label = #expansion_module.X.key.Y.xml_phonebook = {foreach $keys as $row} {if $row.device_key_category == "expansion"} #Expansion module 1 key {$row.device_key_id} expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type} expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line} expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value} expansion_module.1.key.{$row.device_key_id}.pickup_value = {$row.device_key_extension} expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label} expansion_module.1.key.{$row.device_key_id}.xml_phonebook = {/if} {/foreach} ########################################################################################## ## Expansion Module 2 ## ########################################################################################## #Expansion module 2 key 1 #expansion_module.2.key.1.type = {$key_type_1} #expansion_module.2.key.1.line = {$key_id_1} #expansion_module.2.key.1.value = {$key_value_1} #expansion_module.2.key.1.pickup_value = #expansion_module.2.key.1.label = {$key_label_1} #expansion_module.2.key.1.xml_phonebook = #expansion_module.2.key.1.type = 37 #expansion_module.2.key.1.label = {$key_label_1}