#!version:1.0.0.1 #{$microtime} ##File header "#!version:1.0.0.1" can not be edited or deleted.## ####################################################################################### ## Account 1 Settings ## ####################################################################################### #Basic Settings account.1.enable = {if isset($account.1.password)}1{else}0{/if}{""} account.1.label = {$account.1.display_name} account.1.display_name = {$account.1.display_name} account.1.user_name = {$account.1.user_id} account.1.auth_name = {$account.1.user_id} account.1.password = {$account.1.password} account.1.sip_server_host = {$account.1.server_address} account.1.sip_server_port = {$account.1.sip_port} account.1.transport = {if $account.1.sip_transport == 'udp'}0{/if}{if $account.1.sip_transport == 'tcp'}1{/if}{if $account.1.sip_transport == 'tls'}2{/if}{if $account.1.sip_transport == 'dns srv'}3{/if}{""} account.1.expires = {$account.1.register_expires} account.1.outbound_host = {$account.1.outbound_proxy} account.1.outbound_port = {$account.1.sip_port} #Server Redundancy account.1.sip_server.2.address= {$account.1.server.2.address} account.1.sip_server.2.port= {$account.1.sip_port} account.1.sip_server.2.transport_type = {if $account.1.sip_transport == 'udp'}0{/if}{if $account.1.sip_transport == 'tcp'}1{/if}{if $account.1.sip_transport == 'tls'}2{/if}{if $account.1.sip_transport == 'dns srv'}3{/if}{""} account.1.sip_server.2.expires= {$account.1.register_expires} account.1.retry_counts = 3 #Basic Proxy Settings account.1.outbound_proxy_enable= {if isset($account.1.outbound_proxy_primary)}1{else}0{/if}{""} account.1.outbound_proxy.1.address = {$account.1.outbound_proxy_primary} account.1.outbound_proxy.1.port = {if isset($account.1.sip_port)}{$account.1.sip_port}{else}5060{/if}{""} account.1.outbound_proxy.2.address = {$account.1.outbound_proxy_secondary} account.1.outbound_proxy.2.port = {if isset($account.1.sip_port)}{$account.1.sip_port}{else}5060{/if}{""} account.1.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.1.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.1.anonymous_call_oncode = account.1.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.1.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.1.anonymous_reject_oncode = account.1.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.1.sip_listen_port = #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.1.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.1.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.1.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.1.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.1.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.1.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.1.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.1.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.1.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.1.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.1.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.1.srtp_encryption = {$yealink_srtp_encryption} #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.1.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.1.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.1.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.1.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.1.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.1.enable_signal_encode = #Configure the key for encoding. account.1.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.1.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.1.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.1.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.1.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.1.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify; account.1.nat.udp_update_enable = 3 #Specify the keep-alive interval (in seconds), the default value is 30. account.1.nat.udp_update_time = 30 #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.1.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.1.advanced.timer_t1 = account.1.advanced.timer_t2 = account.1.advanced.timer_t4 = account.1.codec.1.enable = {if isset($yealink_codec_pcmu_enable)}1{else}0{/if} account.1.codec.1.payload_type = PCMU account.1.codec.1.priority = {if isset($yealink_codec_pcmu_priority)}{$yealink_codec_pcmu_priority}{else}0{/if} account.1.codec.1.rtpmap = 0 account.1.codec.2.enable = {if isset($yealink_codec_pcma_enable)}1{else}0{/if} account.1.codec.2.payload_type = PCMA account.1.codec.2.priority = {if isset($yealink_codec_pcma_priority)}{$yealink_codec_pcma_priority}{else}0{/if} account.1.codec.2.rtpmap = 8 account.1.codec.3.enable = {if isset($yealink_codec_g723_53_enable)}1{else}0{/if} account.1.codec.3.payload_type = G723_53 account.1.codec.3.priority ={if isset($yealink_codec_g723_53_priority)}{$yealink_codec_g723_53_priority}{else}0{/if} account.1.codec.3.rtpmap = 4 account.1.codec.4.enable = {if isset($yealink_codec_g723_63_enable)}1{else}0{/if} account.1.codec.4.payload_type = G723_63 account.1.codec.4.priority = {if isset($yealink_codec_g723_63_priority)}{$yealink_codec_g723_63_priority}{else}0{/if} account.1.codec.4.rtpmap = 4 account.1.codec.5.enable = {if isset($yealink_codec_g729_enable)}1{else}0{/if} account.1.codec.5.payload_type = G729 account.1.codec.5.priority = {if isset($yealink_codec_g729_priority)}{$yealink_codec_g729_priority}{else}0{/if} account.1.codec.5.rtpmap = 18 account.1.codec.6.enable = {if isset($yealink_codec_g722_enable)}1{else}0{/if} account.1.codec.6.payload_type = G722 account.1.codec.6.priority = {if isset($yealink_codec_g722_priority)}{$yealink_codec_g722_priority}{else}0{/if} account.1.codec.6.rtpmap = 9 account.1.codec.7.enable = {if isset($yealink_codec_iLBC_enable)}1{else}0{/if} account.1.codec.7.payload_type = iLBC account.1.codec.7.priority = {if isset($yealink_codec_iLBC_priority)}{$yealink_codec_iLBC_priority}{else}0{/if} account.1.codec.7.rtpmap = 106 account.1.codec.8.enable = {if isset($yealink_codec_g726_16_enable)}1{else}0{/if} account.1.codec.8.payload_type = G726-16 account.1.codec.8.priority = {if isset($yealink_codec_g726_16_priority)}{$yealink_codec_g726_16_priority}{else}0{/if} account.1.codec.8.rtpmap = 103 account.1.codec.9.enable = {if isset($yealink_codec_g726_24_enable)}1{else}0{/if} account.1.codec.9.payload_type = G726-24 account.1.codec.9.priority = {if isset($yealink_codec_g726_24_priority)}{$yealink_codec_g726_24_priority}{else}0{/if} account.1.codec.9.rtpmap = 104 account.1.codec.10.enable = {if isset($yealink_codec_g726_32_enable)}1{else}0{/if} account.1.codec.10.payload_type = G726-32 account.1.codec.10.priority = {if isset($yealink_codec_g726_32_priority)}{$yealink_codec_g726_32_priority}{else}0{/if} account.1.codec.10.rtpmap = 102 account.1.codec.11.enable = {if isset($yealink_codec_g726_40_enable)}1{else}0{/if} account.1.codec.11.payload_type = G726-40 account.1.codec.11.priority = {if isset($yealink_codec_g726_40_priority)}{$yealink_codec_g726_40_priority}{else}0{/if} account.1.codec.11.rtpmap = 105 account.1.codec.12.enable = {if isset($yealink_codec_gsm_enable)}1{else}0{/if} account.1.codec.12.payload_type = GSM account.1.codec.12.priority = {if isset($yealink_codec_gsm_priority)}{$yealink_codec_gsm_priority}{else}0{/if} account.1.codec.12.rtpmap = 3 account.1.codec.13.enable = {if isset($yealink_codec_opus_enable)}1{else}0{/if} account.1.codec.13.payload_type = opus account.1.codec.13.priority = {if isset($yealink_codec_opus_priority)}{$yealink_codec_opus_priority}{else}0{/if} account.1.codec.13.rtpmap = 106 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.1.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.1.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.1.busy_fwd.enable = account.1.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.1.timeout_fwd.enable = account.1.timeout_fwd.target = account.1.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account1; 0-Disabled (default), 1-Enabled; account.1.dnd.enable = #Configure the DND on code and off code for account1. account.1.sip_trust_ctrl = 1 ####################################################################################### ## Account 2 Settings ## ####################################################################################### #Basic Settings account.2.enable = {if isset($account.2.password) }1{else}0{/if}{""} account.2.label = {$account.2.display_name} account.2.display_name = {$account.2.display_name} account.2.user_name = {$account.2.user_id} account.2.auth_name = {$account.2.user_id} account.2.password = {$account.2.password} account.2.sip_server_host = {$account.2.server_address} account.2.sip_server_port = {$account.2.sip_port} account.2.transport = {if $account.2.sip_transport == 'udp'}0{/if}{if $account.2.sip_transport == 'tcp'}1{/if}{if $account.2.sip_transport == 'tls'}2{/if}{if $account.2.sip_transport == 'dns srv'}3{/if}{""} account.2.expires = {$account.2.register_expires} account.2.outbound_host = {$account.2.outbound_proxy} account.2.outbound_port = {$account.2.sip_port} #Server Redundancy account.2.sip_server.2.address= {$account.2.server.2.address} account.2.sip_server.2.port= {$account.2.sip_port} account.2.sip_server.2.transport_type = {if $account.2.sip_transport == 'udp'}0{/if}{if $account.2.sip_transport == 'tcp'}1{/if}{if $account.2.sip_transport == 'tls'}2{/if}{if $account.2.sip_transport == 'dns srv'}3{/if}{""} account.2.sip_server.2.expires= {$account.2.register_expires} account.2.retry_counts = 3 #Basic Proxy Settings account.2.outbound_proxy_enable= {if isset($account.2.outbound_proxy_primary)}1{else}0{/if}{""} account.2.outbound_proxy.1.address = {$account.2.outbound_proxy_primary} account.2.outbound_proxy.1.port = {if isset($account.2.sip_port)}{$account.2.sip_port}{else}5060{/if}{""} account.2.outbound_proxy.2.address = {$account.2.outbound_proxy_secondary} account.2.outbound_proxy.2.port = {if isset($account.2.sip_port)}{$account.2.sip_port}{else}5060{/if}{""} account.2.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.2.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.2.anonymous_call_oncode = account.2.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.2.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.2.anonymous_reject_oncode = account.2.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.2.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.2.expires = {$account.2.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.2.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.2.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.2.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.2.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.2.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.2.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.2.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.2.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.2.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.2.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.2.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.2.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.2.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.2.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.2.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.2.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.2.enable_signal_encode = #Configure the key for encoding. account.2.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.2.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.2.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.2.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.2.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.2.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.2.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.2.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.2.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.2.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.2.advanced.timer_t1 = account.2.advanced.timer_t2 = account.2.advanced.timer_t4 = account.2.codec.1.enable = 1 account.2.codec.1.payload_type = PCMU account.2.codec.1.priority = 1 account.2.codec.1.rtpmap = 0 account.2.codec.2.enable = 1 account.2.codec.2.payload_type = PCMA account.2.codec.2.priority = 2 account.2.codec.2.rtpmap = 8 account.2.codec.3.enable = 0 account.2.codec.3.payload_type = G723_53 account.2.codec.3.priority =0 account.2.codec.3.rtpmap = 4 account.2.codec.4.enable = 0 account.2.codec.4.payload_type = G723_63 account.2.codec.4.priority = 0 account.2.codec.4.rtpmap = 4 account.2.codec.5.enable = 1 account.2.codec.5.payload_type = G729 account.2.codec.5.priority = 3 account.2.codec.5.rtpmap = 18 account.2.codec.6.enable = 1 account.2.codec.6.payload_type = G722 account.2.codec.6.priority = 4 account.2.codec.6.rtpmap = 9 account.2.codec.7.enable = 0 account.2.codec.7.payload_type = G726-32 account.2.codec.7.priority = 0 account.2.codec.7.rtpmap = 2 account.2.codec.8.enable = 0 account.2.codec.8.payload_type = iLBC_13_3 account.2.codec.8.priority = 0 account.2.codec.8.rtpmap = 97 account.2.codec.9.enable = 0 account.2.codec.9.payload_type = iLBC_15_2 account.2.codec.9.priority = 0 account.2.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.2.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.2.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.2.busy_fwd.enable = account.2.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.2.timeout_fwd.enable = account.2.timeout_fwd.target = account.2.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account2; 0-Disabled (default), 1-Enabled; account.2.dnd.enable = #Configure the DND on code and off code for account1. account.2.sip_trust_ctrl = 1 ####################################################################################### ## Account 3 Settings ## ####################################################################################### #Basic Settings account.3.enable = {if isset($account.3.password) }1{else}0{/if}{""} account.3.label = {$account.3.display_name} account.3.display_name = {$account.3.display_name} account.3.user_name = {$account.3.user_id} account.3.auth_name = {$account.3.user_id} account.3.password = {$account.3.password} account.3.sip_server_host = {$account.3.server_address} account.3.sip_server_port = {$account.3.sip_port} account.3.transport = {if $account.3.sip_transport == 'udp'}0{/if}{if $account.3.sip_transport == 'tcp'}1{/if}{if $account.3.sip_transport == 'tls'}2{/if}{if $account.3.sip_transport == 'dns srv'}3{/if}{""} account.3.expires = {$register_expires} account.3.outbound_host = {$outbound_proxy} account.3.outbound_port = {$sip_port} #Server Redundancy account.3.sip_server.2.address= {$account.3.server.2.address} account.3.sip_server.2.port= {$account.3.sip_port} account.3.sip_server.2.transport_type = {if $account.3.sip_transport == 'udp'}0{/if}{if $account.3.sip_transport == 'tcp'}1{/if}{if $account.3.sip_transport == 'tls'}2{/if}{if $account.3.sip_transport == 'dns srv'}3{/if}{""} account.3.sip_server.2.expires= {$account.3.register_expires} account.3.retry_counts = 3 #Basic Proxy Settings account.3.outbound_proxy_enable= {if isset($account.3.outbound_proxy_primary)}1{else}0{/if}{""} account.3.outbound_proxy.1.address = {$account.3.outbound_proxy_primary} account.3.outbound_proxy.1.port = {if isset($account.3.sip_port)}{$account.3.sip_port}{else}5060{/if}{""} account.3.outbound_proxy.2.address = {$account.3.outbound_proxy_secondary} account.3.outbound_proxy.2.port = {if isset($account.3.sip_port)}{$account.3.sip_port}{else}5060{/if}{""} a ccount.3.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.3.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.3.anonymous_call_oncode = account.3.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.3.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.3.anonymous_reject_oncode = account.3.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.3.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.3.expires = {$account.3.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.3.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.3.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.3.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.3.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.3.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.3.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.3.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.3.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.3.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.3.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.3.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.3.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.3.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.3.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.3.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.3.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.3.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.3.enable_signal_encode = #Configure the key for encoding. account.3.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.3.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.3.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.3.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.3.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.3.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.3.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.3.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.3.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.3.advanced.timer_t1 = account.3.advanced.timer_t2 = account.3.advanced.timer_t4 = account.3.codec.1.enable = 1 account.3.codec.1.payload_type = PCMU account.3.codec.1.priority = 1 account.3.codec.1.rtpmap = 0 account.3.codec.2.enable = 1 account.3.codec.2.payload_type = PCMA account.3.codec.2.priority = 2 account.3.codec.2.rtpmap = 8 account.3.codec.3.enable = 0 account.3.codec.3.payload_type = G723_53 account.3.codec.3.priority =0 account.3.codec.3.rtpmap = 4 account.3.codec.4.enable = 0 account.3.codec.4.payload_type = G723_63 account.3.codec.4.priority = 0 account.3.codec.4.rtpmap = 4 account.3.codec.5.enable = 1 account.3.codec.5.payload_type = G729 account.3.codec.5.priority = 3 account.3.codec.5.rtpmap = 18 account.3.codec.6.enable = 1 account.3.codec.6.payload_type = G722 account.3.codec.6.priority = 4 account.3.codec.6.rtpmap = 9 account.3.codec.7.enable = 0 account.3.codec.7.payload_type = G726-32 account.3.codec.7.priority = 0 account.3.codec.7.rtpmap = 2 account.3.codec.8.enable = 0 account.3.codec.8.payload_type = iLBC_13_3 account.3.codec.8.priority = 0 account.3.codec.8.rtpmap = 97 account.3.codec.9.enable = 0 account.3.codec.9.payload_type = iLBC_15_2 account.3.codec.9.priority = 0 account.3.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.3.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.3.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.3.busy_fwd.enable = account.3.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.3.timeout_fwd.enable = account.3.timeout_fwd.target = account.3.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account3; 0-Disabled (default), 1-Enabled; account.3.dnd.enable = #Configure the DND on code and off code for account3. account.3.sip_trust_ctrl = 1 ####################################################################################### ## Account 4 Settings ## ####################################################################################### #Basic Settings account.4.enable = {if isset($account.4.password) }1{else}0{/if}{""} account.4.label = {$account.4.display_name} account.4.display_name = {$account.4.display_name} account.4.user_name = {$account.4.user_id} account.4.auth_name = {$account.4.user_id} account.4.password = {$account.4.password} account.4.sip_server_host = {$account.4.server_address} account.4.sip_server_port = {$account.4.sip_port} account.4.transport = {if $account.4.sip_transport == 'udp'}0{/if}{if $account.4.sip_transport == 'tcp'}1{/if}{if $account.4.sip_transport == 'tls'}2{/if}{if $account.4.sip_transport == 'dns srv'}3{/if}{""} account.4.expires = {$account.4.register_expires} account.4.outbound_host = {$account.4.outbound_proxy} account.4.outbound_port = {$account.4.sip_port} #Server Redundancy account.4.sip_server.2.address= {$account.4.server.2.address} account.4.sip_server.2.port= {$account.4.sip_port} account.4.sip_server.2.transport_type = {if $account.4.sip_transport == 'udp'}0{/if}{if $account.4.sip_transport == 'tcp'}1{/if}{if $account.4.sip_transport == 'tls'}2{/if}{if $account.4.sip_transport == 'dns srv'}3{/if}{""} account.4.sip_server.2.expires= {$account.4.register_expires} account.4.retry_counts = 3 #Basic Proxy Settings account.4.outbound_proxy_enable= {if isset($account.4.outbound_proxy_primary)}1{else}0{/if}{""} account.4.outbound_proxy.1.address = {$account.4.outbound_proxy_primary} account.4.outbound_proxy.1.port = {if isset($account.4.sip_port)}{$account.4.sip_port}{else}5060{/if}{""} account.4.outbound_proxy.2.address = {$account.4.outbound_proxy_secondary} account.4.outbound_proxy.2.port = {if isset($account.4.sip_port)}{$account.4.sip_port}{else}5060{/if}{""} account.4.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.4.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.4.anonymous_call_oncode = account.4.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.4.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.4.anonymous_reject_oncode = account.4.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.4.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.4.expires = {$account.4.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.4.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.4.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.4.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.4.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.4.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.4.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.4.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.4.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.4.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.4.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.4.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.4.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.4.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.4.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.4.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.4.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.4.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.4.enable_signal_encode = #Configure the key for encoding. account.4.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.4.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.4.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.4.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.4.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.4.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.4.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.4.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.4.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.4.advanced.timer_t1 = account.4.advanced.timer_t2 = account.4.advanced.timer_t4 = account.4.codec.1.enable = 1 account.4.codec.1.payload_type = PCMU account.4.codec.1.priority = 1 account.4.codec.1.rtpmap = 0 account.4.codec.2.enable = 1 account.4.codec.2.payload_type = PCMA account.4.codec.2.priority = 2 account.4.codec.2.rtpmap = 8 account.4.codec.3.enable = 0 account.4.codec.3.payload_type = G723_53 account.4.codec.3.priority =0 account.4.codec.3.rtpmap = 4 account.4.codec.4.enable = 0 account.4.codec.4.payload_type = G723_63 account.4.codec.4.priority = 0 account.4.codec.4.rtpmap = 4 account.4.codec.5.enable = 1 account.4.codec.5.payload_type = G729 account.4.codec.5.priority = 3 account.4.codec.5.rtpmap = 18 account.4.codec.6.enable = 1 account.4.codec.6.payload_type = G722 account.4.codec.6.priority = 4 account.4.codec.6.rtpmap = 9 account.4.codec.7.enable = 0 account.4.codec.7.payload_type = G726-32 account.4.codec.7.priority = 0 account.4.codec.7.rtpmap = 2 account.4.codec.8.enable = 0 account.4.codec.8.payload_type = iLBC_13_3 account.4.codec.8.priority = 0 account.4.codec.8.rtpmap = 97 account.4.codec.9.enable = 0 account.4.codec.9.payload_type = iLBC_15_2 account.4.codec.9.priority = 0 account.4.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.4.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.4.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.4.busy_fwd.enable = account.4.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.4.timeout_fwd.enable = account.4.timeout_fwd.target = account.4.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account4; 0-Disabled (default), 1-Enabled; account.4.dnd.enable = #Configure the DND on code and off code for account4. account.4.sip_trust_ctrl = 1 ####################################################################################### ## Account 5 Settings ## ####################################################################################### #Basic Settings account.5.enable = {if isset($account.5.password) }1{else}0{/if}{""} account.5.label = {$account.5.display_name} account.5.display_name = {$account.5.display_name} account.5.user_name = {$account.5.user_id} account.5.auth_name = {$account.5.user_id} account.5.password = {$account.5.password} account.5.sip_server_host = {$account.5.server_address} account.5.sip_server_port = {$account.5.sip_port} account.5.transport = {if $account.5.sip_transport == 'udp'}0{/if}{if $account.5.sip_transport == 'tcp'}1{/if}{if $account.5.sip_transport == 'tls'}2{/if}{if $account.5.sip_transport == 'dns srv'}3{/if}{""} account.5.expires = {$account.5.register_expires} account.5.outbound_host = {$account.5.outbound_proxy} account.5.outbound_port = {$account.5.sip_port} #Server Redundancy account.5.sip_server.2.address= {$account.5.server.2.address} account.5.sip_server.2.port= {$account.5.sip_port} account.5.sip_server.2.transport_type = {if $account.5.sip_transport == 'udp'}0{/if}{if $account.5.sip_transport == 'tcp'}1{/if}{if $account.5.sip_transport == 'tls'}2{/if}{if $account.5.sip_transport == 'dns srv'}3{/if}{""} account.5.sip_server.2.expires= {$account.5.register_expires} account.5.retry_counts = 3 #Basic Proxy Settings account.5.outbound_proxy_enable= {if isset($account.5.outbound_proxy_primary)}1{else}0{/if}{""} account.5.outbound_proxy.1.address = {$account.5.outbound_proxy_primary} account.5.outbound_proxy.1.port = {if isset($account.5.sip_port)}{$account.5.sip_port}{else}5060{/if}{""} account.5.outbound_proxy.2.address = {$account.5.outbound_proxy_secondary} account.5.outbound_proxy.2.port = {if isset($account.5.sip_port)}{$account.4.sip_port}{else}5060{/if}{""} account.5.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.5.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.5.anonymous_call_oncode = account.5.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.5.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.5.anonymous_reject_oncode = account.5.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.5.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.5.expires = {$account.5.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.5.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.5.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.5.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.5.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.5.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.5.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.5.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.5.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.5.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.5.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.5.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.5.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.5.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.5.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.5.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.5.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.5.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.5.enable_signal_encode = #Configure the key for encoding. account.5.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.5.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.5.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.5.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.5.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.5.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.5.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.5.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.5.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.5.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.5.advanced.timer_t1 = account.5.advanced.timer_t2 = account.5.advanced.timer_t4 = account.5.codec.1.enable = 1 account.5.codec.1.payload_type = PCMU account.5.codec.1.priority = 1 account.5.codec.1.rtpmap = 0 account.5.codec.2.enable = 1 account.5.codec.2.payload_type = PCMA account.5.codec.2.priority = 2 account.5.codec.2.rtpmap = 8 account.5.codec.3.enable = 0 account.5.codec.3.payload_type = G723_53 account.5.codec.3.priority =0 account.5.codec.3.rtpmap = 4 account.5.codec.4.enable = 0 account.5.codec.4.payload_type = G723_63 account.5.codec.4.priority = 0 account.5.codec.4.rtpmap = 4 account.5.codec.5.enable = 1 account.5.codec.5.payload_type = G729 account.5.codec.5.priority = 3 account.5.codec.5.rtpmap = 18 account.5.codec.6.enable = 1 account.5.codec.6.payload_type = G722 account.5.codec.6.priority = 4 account.5.codec.6.rtpmap = 9 account.5.codec.7.enable = 0 account.5.codec.7.payload_type = G726-32 account.5.codec.7.priority = 0 account.5.codec.7.rtpmap = 2 account.5.codec.8.enable = 0 account.5.codec.8.payload_type = iLBC_13_3 account.5.codec.8.priority = 0 account.5.codec.8.rtpmap = 97 account.5.codec.9.enable = 0 account.5.codec.9.payload_type = iLBC_15_2 account.5.codec.9.priority = 0 account.5.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.5.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.5.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.5.busy_fwd.enable = account.5.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.5.timeout_fwd.enable = account.5.timeout_fwd.target = account.5.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; account.5.dnd.enable = #Configure the DND on code and off code for account5. account.5.sip_trust_ctrl = 1 voice_mail.number.1 = {$voicemail_number} ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, submask, gateway and DNS server. #Require reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = {if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}{""} {if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}{""} {if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}{""} ####################################################################################### ## Account 6 Settings ## ####################################################################################### #Basic Settings account.6.enable = {if isset($account.6.password) }1{else}0{/if}{""} account.6.label = {$account.6.display_name} account.6.display_name = {$account.6.display_name} account.6.user_name = {$account.6.user_id} account.6.auth_name = {$account.6.user_id} account.6.password = {$account.6.password} account.6.sip_server_host = {$account.6.server_address} account.6.sip_server_port = {$account.6.sip_port} account.6.transport = {if $account.6.sip_transport == 'udp'}0{/if}{if $account.6.sip_transport == 'tcp'}1{/if}{if $account.6.sip_transport == 'tls'}2{/if}{if $account.6.sip_transport == 'dns srv'}3{/if}{""} a ccount.6.expires = {$account.6.register_expires} account.6.outbound_host = {$account.6.outbound_proxy} account.6.outbound_port = {$account.6.sip_port} #Server Redundancy account.6.sip_server.2.address= {$account.6.server.2.address} account.6.sip_server.2.port= {$account.6.sip_port} account.6.sip_server.2.transport_type = {if $account.6.sip_transport == 'udp'}0{/if}{if $account.6.sip_transport == 'tcp'}1{/if}{if $account.6.sip_transport == 'tls'}2{/if}{if $account.6.sip_transport == 'dns srv'}3{/if}{""} account.6.sip_server.2.expires= {$account.6.register_expires} account.6.retry_counts = 3 #Basic Proxy Settings account.6.outbound_proxy_enable= {if isset($account.6.outbound_proxy_primary)}1{else}0{/if}{""} account.6.outbound_proxy.1.address = {$account.6.outbound_proxy_primary} account.6.outbound_proxy.1.port = {if isset($account.6.sip_port)}{$account.6.sip_port}{else}5060{/if}{""} account.6.outbound_proxy.2.address = {$account.6.outbound_proxy_secondary} account.6.outbound_proxy.2.port = {if isset($account.6.sip_port)}{$account.6.sip_port}{else}5060{/if}{""} account.6.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.6.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.6.anonymous_call_oncode = account.6.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.6.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.6.anonymous_reject_oncode = account.6.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.6.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.6.expires = {$account.6.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.6.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.6.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.6.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.6.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.6.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.6.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.6.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.6.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.6.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.6.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.6.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.6.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.6.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.6.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.6.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.6.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.6.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.6.enable_signal_encode = #Configure the key for encoding. account.6.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.6.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.6.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.6.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.6.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.6.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.6.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.6.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.6.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.6.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.6.advanced.timer_t1 = account.6.advanced.timer_t2 = account.6.advanced.timer_t4 = account.6.codec.1.enable = 1 account.6.codec.1.payload_type = PCMU account.6.codec.1.priority = 1 account.6.codec.1.rtpmap = 0 account.6.codec.2.enable = 1 account.6.codec.2.payload_type = PCMA account.6.codec.2.priority = 2 account.6.codec.2.rtpmap = 8 account.6.codec.3.enable = 0 account.6.codec.3.payload_type = G723_63 account.6.codec.3.priority =0 account.6.codec.3.rtpmap = 4 account.6.codec.4.enable = 0 account.6.codec.4.payload_type = G723_63 account.6.codec.4.priority = 0 account.6.codec.4.rtpmap = 4 account.6.codec.5.enable = 1 account.6.codec.5.payload_type = G729 account.6.codec.5.priority = 3 account.6.codec.5.rtpmap = 18 account.6.codec.6.enable = 1 account.6.codec.6.payload_type = G722 account.6.codec.6.priority = 4 account.6.codec.6.rtpmap = 9 account.6.codec.7.enable = 0 account.6.codec.7.payload_type = G726-32 account.6.codec.7.priority = 0 account.6.codec.7.rtpmap = 2 account.6.codec.8.enable = 0 account.6.codec.8.payload_type = iLBC_13_3 account.6.codec.8.priority = 0 account.6.codec.8.rtpmap = 97 account.6.codec.9.enable = 0 account.6.codec.9.payload_type = iLBC_15_2 account.6.codec.9.priority = 0 account.6.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.6.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.6.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.6.busy_fwd.enable = account.6.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.6.timeout_fwd.enable = account.6.timeout_fwd.target = account.6.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; account.6.dnd.enable = #Configure the DND on code and off code for account5. account.6.sip_trust_ctrl = 1 voice_mail.number.1 = {$voicemail_number} ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, submask, gateway and DNS server. #Require reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = {if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}{""} {if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}{""} {if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}{""} ####################################################################################### ## Account 7 Settings ## ####################################################################################### #Basic Settings account.7.enable = {if isset($account.7.user_password) }1{else}0{/if}{""} account.7.label = {$account.7.display_name} account.7.display_name = {$account.7.display_name} account.7.user_name = {$account.7.user_id} account.7.auth_name = {$account.7.user_id} account.7.password = {$account.7.user_password} account.7.sip_server_host = {$account.7.server_address} account.7.sip_server_port = {$account.7.sip_port} account.7.transport = {if $account.7.sip_transport == 'udp'}0{/if}{if $account.7.sip_transport == 'tcp'}1{/if}{if $account.7.sip_transport == 'tls'}2{/if}{if $account.7.sip_transport == 'dns srv'}3{/if}{""} account.7.expires = {$account.7.register_expires} account.7.outbound_host = {$account.7.outbound_proxy} account.7.outbound_port = {$account.7.sip_port} #Server Redundancy account.7.sip_server.2.address= {$account.7.server_address} account.7.sip_server.2.port= {$account.7.sip_port} account.7.sip_server.2.transport_type = {if $account.7.sip_transport == 'udp'}0{/if}{if $account.7.sip_transport == 'tcp'}1{/if}{if $account.7.sip_transport == 'tls'}2{/if}{if $account.7.sip_transport == 'dns srv'}3{/if}{""} account.7.sip_server.2.expires= {$account.7.register_expires} account.7.retry_counts = 3 #Basic Proxy Settings account.7.outbound_proxy_enable= {if isset($account.7.outbound_proxy_primary)}1{else}0{/if}{""} account.7.outbound_proxy.1.address = {$account.7.outbound_proxy_primary} account.7.outbound_proxy.1.port = {if isset($account.7.sip_port)}{$account.7.outbound_sip_port}{else}5060{/if}{""} account.7.outbound_proxy.2.address = {$account.7.outbound_proxy_secondary} account.7.outbound_proxy.2.port = {if isset($account.7.sip_port)}{$account.7.sip_port}{else}5060{/if}{""} account.7.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.7.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.7.anonymous_call_oncode = account.7.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.7.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.7.anonymous_reject_oncode = account.7.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.7.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.7.expires = {$register_expires_7} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.7.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.7.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.7.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.7.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.7.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.7.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.7.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.7.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.7.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.7.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.7.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.7.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.7.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.7.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.7.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.7.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.7.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.7.enable_signal_encode = #Configure the key for encoding. account.7.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.7.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.7.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.7.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.7.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.7.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.7.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.7.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.7.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.7.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.7.advanced.timer_t1 = account.7.advanced.timer_t2 = account.7.advanced.timer_t4 = account.7.codec.1.enable = 1 account.7.codec.1.payload_type = PCMU account.7.codec.1.priority = 1 account.7.codec.1.rtpmap = 0 account.7.codec.2.enable = 1 account.7.codec.2.payload_type = PCMA account.7.codec.2.priority = 2 account.7.codec.2.rtpmap = 8 account.7.codec.3.enable = 0 account.7.codec.3.payload_type = G723_73 account.7.codec.3.priority =0 account.7.codec.3.rtpmap = 4 account.7.codec.4.enable = 0 account.7.codec.4.payload_type = G723_73 account.7.codec.4.priority = 0 account.7.codec.4.rtpmap = 4 account.7.codec.5.enable = 1 account.7.codec.5.payload_type = G729 account.7.codec.5.priority = 3 account.7.codec.5.rtpmap = 18 account.7.codec.6.enable = 1 account.7.codec.6.payload_type = G722 account.7.codec.6.priority = 4 account.7.codec.6.rtpmap = 9 account.7.codec.7.enable = 0 account.7.codec.7.payload_type = G726-32 account.7.codec.7.priority = 0 account.7.codec.7.rtpmap = 2 account.7.codec.8.enable = 0 account.7.codec.8.payload_type = iLBC_13_3 account.7.codec.8.priority = 0 account.7.codec.8.rtpmap = 97 account.7.codec.9.enable = 0 account.7.codec.9.payload_type = iLBC_15_2 account.7.codec.9.priority = 0 account.7.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.7.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.7.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.7.busy_fwd.enable = account.7.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.7.timeout_fwd.enable = account.7.timeout_fwd.target = account.7.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; account.7.dnd.enable = #Configure the DND on code and off code for account5. account.7.sip_trust_ctrl = 1 voice_mail.number.1 = {$voicemail_number} ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, submask, gateway and DNS server. #Require reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = {if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}{""} {if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}{""} {if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}{""} ####################################################################################### ## Account 8 Settings ## ####################################################################################### #Basic Settings account.8.enable = {if isset($account.8.user_password) }1{else}0{/if}{""} account.8.label = {$account.8.display_name} account.8.display_name = {$account.8.display_name} account.8.user_name = {$account.8.user_id} account.8.auth_name = {$account.8.user_id} account.8.password = {$account.8.user_password} account.8.sip_server_host = {$account.8.server_address} account.8.sip_server_port = {$account.8.sip_port} account.8.transport = {if $account.8.sip_transport == 'udp'}0{/if}{if $account.8.sip_transport == 'tcp'}1{/if}{if $account.8.sip_transport == 'tls'}2{/if}{if $account.8.sip_transport == 'dns srv'}3{/if}{""} account.8.expires = {$account.8.register_expires} account.8.outbound_host = {$account.8.outbound_proxy} account.8.outbound_port = {$account.8.sip_port} #Server Redundancy account.8.sip_server.2.address= {$account.8.server_address} account.8.sip_server.2.port= {$account.8.sip_port} account.8.sip_server.2.transport_type = {if $account.8.sip_transport == 'udp'}0{/if}{if $account.8.sip_transport == 'tcp'}1{/if}{if $account.8.sip_transport == 'tls'}2{/if}{if $account.8.sip_transport == 'dns srv'}3{/if}{""} account.8.sip_server.2.expires= {$account.8.register_expires} account.8.retry_counts = 3 #Basic Proxy Settings account.8.outbound_proxy_enable= {if isset($account.8.outbound_proxy_primary)}1{else}0{/if}{""} account.8.outbound_proxy.1.address = {$account.8.outbound_proxy_primary} account.8.outbound_proxy.1.port = {if isset($account.8.sip_port)}{$account.8.sip_port}{else}5060{/if}{""} account.8.outbound_proxy.2.address = {$account.8.outbound_proxy_secondary} account.8.outbound_proxy.2.port = {if isset($account.8.sip_port)}{$account.8.sip_port}{else}5060{/if}{""} account.8.fallback.timeout = {$yealink_outbound_proxy_fallback_interval} #Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled; account.8.anonymous_call = #Configure the on code and off code of the anonymous call feature. account.8.anonymous_call_oncode = account.8.anonymous_call_offcode = #Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled; account.8.reject_anonymous_call = #Configure the on code and off code of the reject anonymous call feature. account.8.anonymous_reject_oncode = account.8.anonymous_reject_offcode = #Configure the SIP port for account 1, the default value is 5060. account.8.sip_listen_port = #Configure the register expiry time (in seconds), the default value is 3600. account.8.expires = {$account.8.register_expires} #Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default); account.8.100rel_enable = {$yealink_retransmission} #Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled; account.8.precondition = #Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled; account.8.subscribe_register = #Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled; account.8.subscribe_mwi = 0 #Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600. account.8.subscribe_mwi_expires = 3600 #Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI; account.8.cid_source = {$yealink_cid_source} #Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916; account.8.cp_source = 2 #Enable or disable the session timer; 0-Disabled (default), 1-Enabled; account.8.session_timer.enable = {$yealink_session_timer} #Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999. account.8.session_timer.expires = #Configure the session timer refresher; 0-Uac (default), 1-Uas; account.8.session_timer.refresher = #Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled; account.8.enable_user_equal_phone = #Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated; account.8.srtp_encryption = #Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60. account.8.ptime = #Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled; account.8.subscribe_mwi_to_vm = 0 #Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled; account.8.register_mac = #Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default); account.8.register_line = #Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30. account.8.reg_fail_retry_interval = #Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4); account.8.enable_signal_encode = #Configure the key for encoding. account.8.signal_encode_key = #Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO; account.8.dtmf.type = {$yealink_dtmf_type} #Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101. account.8.dtmf.dtmf_payload = #Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event; account.8.dtmf.info_type = ####################################################################################### ## NAT Settings ## ####################################################################################### #Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN; account.8.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}{""} #Configure the STUN server address. account.8.nat.stun_server = {$stun_server} #Configure the STUN server port, the default value is 3478. account.8.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}{""} #Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default); account.8.nat.udp_update_enable = #Specify the keep-alive interval (in seconds), the default value is 30. account.8.nat.udp_update_time = #Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled; account.8.nat.rport = {$yealink_rport} #Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5. account.8.advanced.timer_t1 = account.8.advanced.timer_t2 = account.8.advanced.timer_t4 = account.8.codec.1.enable = 1 account.8.codec.1.payload_type = PCMU account.8.codec.1.priority = 1 account.8.codec.1.rtpmap = 0 account.8.codec.2.enable = 1 account.8.codec.2.payload_type = PCMA account.8.codec.2.priority = 2 account.8.codec.2.rtpmap = 8 account.8.codec.3.enable = 0 account.8.codec.3.payload_type = G723_83 account.8.codec.3.priority =0 account.8.codec.3.rtpmap = 4 account.8.codec.4.enable = 0 account.8.codec.4.payload_type = G723_83 account.8.codec.4.priority = 0 account.8.codec.4.rtpmap = 4 account.8.codec.5.enable = 1 account.8.codec.5.payload_type = G729 account.8.codec.5.priority = 3 account.8.codec.5.rtpmap = 18 account.8.codec.6.enable = 1 account.8.codec.6.payload_type = G722 account.8.codec.6.priority = 4 account.8.codec.6.rtpmap = 9 account.8.codec.7.enable = 0 account.8.codec.7.payload_type = G726-32 account.8.codec.7.priority = 0 account.8.codec.7.rtpmap = 2 account.8.codec.8.enable = 0 account.8.codec.8.payload_type = iLBC_13_3 account.8.codec.8.priority = 0 account.8.codec.8.rtpmap = 97 account.8.codec.9.enable = 0 account.8.codec.9.payload_type = iLBC_15_2 account.8.codec.9.priority = 0 account.8.codec.9.rtpmap = 97 ####################################################################################### ## Call Forward ## ####################################################################################### #Enable or disable the always forward, 0-Disabled(default), 1-Enabled; account.8.always_fwd.enable = #Configure the target phonenumber that the phone will forward the call to; account.8.always_fwd.target = #Configure the on/off code for always forward; #Enable or disable the busy forward, 0-Disabled(default), 1-Enabled; account.8.busy_fwd.enable = account.8.busy_fwd.target = #Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled; #Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default); account.8.timeout_fwd.enable = account.8.timeout_fwd.target = account.8.timeout_fwd.timeout = ####################################################################################### ## DND ## ####################################################################################### #Configure the DND key mode; 0-Phone mode (default), 1-Custom mode. features.dnd_mode = #Enable or disable the DND feautre for account5; 0-Disabled (default), 1-Enabled; account.8.dnd.enable = #Configure the DND on code and off code for account5. account.8.sip_trust_ctrl = 1 voice_mail.number.1 = {$voicemail_number} ####################################################################################### ## Network ## ####################################################################################### #Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address; #Require reboot; network.internet_port.type = #Configure the static IP address, submask, gateway and DNS server. #Require reboot; network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = {if isset($dns_server_primary)}network.primary_dns = {$dns_server_primary}{/if}{""} {if isset($dns_server_secondary)}network.secondary_dns = {$dns_server_secondary}{/if}{""} {if isset($dns_server_primary)}network.static_dns_enable = 1{else}network.static_dns_enable = 0{/if}{""}