dbxe
/
fusionpbx
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fusionpbx/resources/templates/provision/grandstream/dp750/{$mac}.xml

3390 lines
90 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="utf-8"?>
<gs_provision version="1">
<config version="1">
<!-- ######################################################################################## -->
<!-- # Configuration template for DP750 firmware version 1.0.2.16 ## -->
<!-- ######################################################################################## -->
<!-- ######################## -->
<!-- # Profiles Settings ## -->
<!-- ######################## -->
<!-- ################ -->
<!-- # Profile 1 ## -->
<!-- ################ -->
<!-- ################################# -->
<!-- # Profile 1/General Settings ## -->
<!-- ################################# -->
<!-- Profile Active. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($account.1.password)}
<P271>1</P271>
{else}
<P271>0</P271>
{/if}
<!-- Primary SIP Server -->
<!-- String: serveraddress -->
<P47>{$account.1.server_address}</P47>
<!-- Failover SIP Server -->
<!-- String: serveraddress -->
<P967></P967>
<!-- Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4567>0</P4567>
<!-- Outbound Proxy -->
<!-- String: serveraddress -->
<P48>{$account.1.outbound_proxy}</P48>
<!-- Voice Mail Access Number -->
<!-- String -->
<P27680>*97</P27680>
<!-- ################################# -->
<!-- # Profile 1/Network Settings ## -->
<!-- ################################# -->
<!-- Layer 3 QoS SIP Diff-Serv (default 24) -->
<!-- Number -->
<!-- Mandatory -->
<P5046>24</P5046>
<!-- Layer 3 QoS RTP Diff-Serv (default 46) -->
<!-- Number -->
<!-- Mandatory -->
<P5050>46</P5050>
<!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!-- Number: 0,1,2,3 -->
<!-- Mandatory -->
{if isset($grandstream_dns_mode_1) }
<P103>{$grandstream_dns_mode_1}</P103>
{else}
<P103>0</P103>
{/if}
<!-- Primary IP -->
<!-- IP address -->
<P2308></P2308>
<!-- Backup IP1 -->
<!-- IP address -->
<P2309></P2309>
<!-- Backup IP2 -->
<!-- IP address -->
<P2310></P2310>
<!-- NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{if isset($grandstream_nat_traversal_1) }
<P52>{$grandstream_nat_traversal_1}</P52>
{else}
<P52>0</P52>
{/if}
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. -->
<!-- String: ipaddress -->
<P101></P101>
<!-- Proxy-Require (A SIP extension to enable firewall penetration) -->
<!-- String: ipaddress -->
<P197></P197>
<!-- ############################################ -->
<!-- # Profile 1/SIP Settings/Basic Settings ## -->
<!-- ############################################ -->
<!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{$tp=0}
{if $account.1.sip_transport == 'udp'}{$tp=0}{/if}
{if $account.1.sip_transport == 'tcp'}{$tp=1}{/if}
{if $account.1.sip_transport == 'tls'}{$tp=2}{/if}
{if $account.1.sip_transport == 'dns srv'}{$tp=1}{/if}
<P130>{$tp}</P130>
<!-- SIP Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P31>1</P31>
<!-- Unregister On Reboot. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P81>0</P81>
<!-- Add Auth Header On Initial REGISTER -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2359>0</P2359>
<!-- Outgoing call without Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P109>1</P109>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!-- Number: 1 to 64800 -->
<!-- Mandatory -->
<P32>{$account.1.register_expires}</P32>
<!-- SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30) -->
<!-- Number: 1 to 3600 -->
<!-- Mandatory -->
<P138>20</P138>
<!-- SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec. -->
<!-- Number 0 to 3600 -->
<!-- Mandatory -->
<P26002>1200</P26002>
<!-- Reregister before Expiration -->
<!-- Number -->
<!-- Mandatory -->
<P2330>0</P2330>
<!-- Local SIP port (default 5060) -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P40>5060</P40>
<!-- Use Random SIP Port 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P78>0</P78>
<!-- SIP T1 Timeout. RFC 3261 T1 value. -->
<!-- 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. -->
<!-- Number: 50,100,200,400,800 -->
<!-- Mandatory -->
<P209>50</P209>
<!-- SIP T2 Timeout. RFC 3261 T2 value. -->
<!-- 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!-- Number: 1600,3200,200,400,800 -->
<!-- Mandatory -->
<P250>400</P250>
<!-- SIP TIMER D. Config Timer D defined in RFC 3261. -->
<!-- Range 0-64 sec. Default 0 -->
<!-- Number: 0-64 -->
<!-- Mandatory -->
<P2387>0</P2387>
<!-- Remove OBP from Route Header. 0 - no, 1 - yes -->
<!-- NUmber: 0,1 -->
<!-- Mandatory -->
<P4562>0</P4562>
<!-- Support SIP Instance ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P288>1</P288>
<!-- Hold Target Before Refer 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P26003>1</P26003>
<!-- Refer-To Use Target Contact. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P135></P135>
<!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($subscribe_mwi)}
<P99>{$subscribe_mwi}</P99>
{else}
<P99>0</P99>
{/if}
<!-- Enable 100rel. 0 - No, 1 - Yes -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P272>0</P272>
<!-- Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P63>0</P63>
<!-- Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1406>0</P1406>
<!-- Disable Multiple m Line in SDP. 0 - No, 1 - Yes -->
<P137>0</P137>
<!-- Use Privacy Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2338>0</P2338>
<!-- Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2339>0</P2339>
<!-- ########################################### -->
<!-- # Profile 1/SIP Settings/Session Timer ## -->
<!-- ########################################### -->
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<!-- Number: 90 to 64800 -->
<!-- Mandatory -->
<P260>180</P260>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!-- Number 90 to 64800 -->
<!-- Mandatory -->
<P261>90</P261>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P262>0</P262>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P263>0</P263>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P264>0</P264>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P266>0</P266>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!-- Number: 1,2 -->
<!-- Mandatory -->
<P267>1</P267>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P265>0</P265>
<!-- ############################################### -->
<!-- # Profile 1/SIP Settings/Security Settings ## -->
<!-- ############################################### -->
<!-- Validate Incoming Messages. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4340>0</P4340>
<!-- Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes) -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P258>0</P258>
<!-- Allow Incoming SIP Messages from SIP Proxy Only -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P243>0</P243>
<!-- Authenticate incoming INVITE -->
<!-- Number: 0,1 -->
<P2346>0</P2346>
<!-- Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2311>0</P2311>
<!-- Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2367>0</P2367>
<!-- Trusted CA certificates. -->
<!-- String -->
<P2386></P2386>
<!-- ############################### -->
<!-- # Profile 1/Audio Settings ## -->
<!-- ############################### -->
<!-- Preferred DTMF Method 1 -->
<!-- 100 - In-audio, 101 - RFC2833, 102 - SIP INFO -->
<!-- Priority 1 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P850>101</P850>
<!-- Preferred DTMF Method 2 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P851>102</P851>
<!-- Preferred DTMF Method 3 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P852>100</P852>
<!-- Disable DTMF Negotiation. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4825>0</P4825>
<!-- DTMF Payload Type -->
<!-- Number: 96 to 127 -->
<P79>101</P79>
<!-- Preferred Vocoder -->
<!-- 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, -->
<!-- 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band) -->
<!-- Choice 1. -->
<!-- Mandatory -->
<!-- <P57>0</P57> -->
<P57>0</P57>
<!-- Choice 2. -->
<!-- Mandatory -->
<!-- <P58>8</P58> -->
<P58>8</P58>
<!-- Choice 3. -->
<!-- Mandatory -->
<!-- <P59>4</P59> -->
<P59>4</P59>
<!-- Choice 4. -->
<!-- Mandatory -->
<!-- <P60>18</P60> -->
<P60>18</P60>
<!-- Choice 5. -->
<!-- Mandatory -->
<!-- <P61>2</P61> -->
<P61>2</P61>
<!-- Choice 6. -->
<!-- Mandatory -->
<!-- <P62>98</P62> -->
<P62>98</P62>
<!-- Choice 7. -->
<!-- Mandatory -->
<!-- <P46>104</P46> -->
<P46>104</P46>
<!-- Choice 8. -->
<!-- Mandatory -->
<!-- <P98>100</P98> -->
<P98>100</P98>
<!-- Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!-- Number: 1 to 4 -->
<P37>2</P37>
<!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P49>0</P49>
<!-- G726-32 Packing Mode. 0 - ITU, 1 - IETF -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2323>0</P2323>
<!-- iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P97>0</P97>
<!-- iLBC payload type. Between 96 and 127, default is 97. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P96>97</P96>
<!-- Disable OPUS stereo in SDP, default is 0. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P20529></P20529>
<!-- OPUS Payload Type, default is 125. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P2385>125</P2385>
<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4363>0</P4363>
<!-- SRTP Mode -->
<!-- 0=Disabled -->
<!-- 1=Enabled but not forced -->
<!-- 2=Enabled and forced -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P183>0</P183>
<!-- Crypto Life Time -->
<!-- 0=Disabled -->
<!-- 1=Enabled -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2363>1</P2363>
<!-- Silence Suppression (VAD). 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P50>0</P50>
<!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P133>1</P133>
<!-- Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P132>1</P132>
<!-- ############################## -->
<!-- # Profile 1/Call Settings ## -->
<!-- ############################## -->
<!-- Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P29>0</P29>
<!-- Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!-- String Max Length: 32 -->
<P66></P66>
<!-- Dial Plan -->
<!-- String Max Length: 1024 -->
{if isset($grandstream_dial_plan) }
<P4200>{$grandstream_dial_plan}</P4200>
{else}
<P4200>{literal}{x+|*x+|*++|\p\a\r\k\+*x+| \f\l\o\w\+*x+}{/literal}</P4200>
{/if}
<!-- <P4200>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ | \+x+ | \p\a\r\k\+*x+ }</P4200> -->
<!-- Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P72>1</P72>
<!-- No Key Entry Timeout. Default - 4 seconds. -->
<!-- Number: 1 to 15 -->
<!-- Mandatory -->
<P85>4</P85>
<!-- Offhook Auto-Dial Delay (default is 0) -->
<!-- String: 0 to 60 -->
<P4045>0</P4045>
<!-- Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All -->
<P191>1</P191>
<!-- Disable Call Waiting Caller ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P714>0</P714>
<!-- Disable Call Waiting Tone. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P186>0</P186>
<!-- Disable Visual MWI. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P855>0</P855>
<!-- Transfer on Conference Hangup. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4560>0</P4560>
<!-- Ring Timeout. (10-300, default is 60 seconds) -->
<!-- Number: 10 to 300 -->
<!-- Mandatory -->
<P185>60</P185>
<!-- Hunting Group Ring Timeout. (5-300, default is 20 seconds) -->
<!-- Number: 5 to 300 -->
<!-- Mandatory -->
<P4330>20</P4330>
<!-- Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes). -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P65>0</P65>
<!-- Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P129>0</P129>
<!-- Special Feature -->
<!-- 100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA. -->
<!-- Number: 100, 102, 108, 109, 111, 114, 119, 120 -->
<!-- Mandatory -->
<P198>100</P198>
<!-- ################ -->
<!-- # Profile 2 ## -->
<!-- ################ -->
<!-- ################################# -->
<!-- # Profile 2/General Settings ## -->
<!-- ################################# -->
<!-- Profile Active. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($account.2.password)}
<P401>1</P401>
{else}
<P401>0</P401>
{/if}
<!-- Primary SIP Server -->
<!-- String: serveraddress -->
<P747>{$account.2.server_address}</P747>
<!-- Failover SIP Server -->
<!-- String: serveraddress -->
<P987></P987>
<!-- Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4568>0</P4568>
<!-- Outbound Proxy -->
<!-- String: serveraddress -->
<P748>{$account.2.outbound_proxy}</P748>
<!-- Voice Mail Access Number -->
<!-- String -->
<P27681>*97</P27681>
<!-- ################################# -->
<!-- # Profile 2/Network Settings ## -->
<!-- ################################# -->
<!-- Layer 3 QoS SIP Diff-Serv (default 24) -->
<!-- Number -->
<!-- Mandatory -->
<P5047>24</P5047>
<!-- Layer 3 QoS RTP Diff-Serv (default 46) -->
<!-- Number -->
<!-- Mandatory -->
<P5051>46</P5051>
<!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!-- Number: 0,1,2,3 -->
<!-- Mandatory -->
{if isset($account.2.dns_mode)}
<P702>{$account.2.dns_mode}</P702>
{else}
<P702>0</P702>
{/if}
<!-- Primary IP -->
<!-- IP address -->
<P2408></P2408>
<!-- Backup IP1 -->
<!-- IP address -->
<P2409></P2409>
<!-- Backup IP2 -->
<!-- IP address -->
<P2410></P2410>
<!-- NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{if isset($grandstream_nat_traversal_2) }
<P730>{$grandstream_nat_traversal_2}</P730>
{else}
<P730>0</P730>
{/if}
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. -->
<!-- String: ipaddress -->
<P866></P866>
<!-- Proxy-Require (A SIP extension to enable firewall penetration) -->
<!-- String: ipaddress -->
<P792></P792>
<!-- ############################################ -->
<!-- # Profile 2/SIP Settings/Basic Settings ## -->
<!-- ############################################ -->
<!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{$tp=0}
{if $account.2.sip_transport == 'udp'}{$tp=0}{/if}
{if $account.2.sip_transport == 'tcp'}{$tp=1}{/if}
{if $account.2.sip_transport == 'tls'}{$tp=2}{/if}
{if $account.2.sip_transport == 'dns srv'}{$tp=1}{/if}
<P830>{$tp}</P830>
<!-- SIP Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P731>1</P731>
<!-- Unregister On Reboot. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P752>0</P752>
<!-- Add Auth Header On Initial REGISTER -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2459>0</P2459>
<!-- Outgoing call without Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P813>1</P813>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!-- Number: 1 to 64800 -->
<!-- Mandatory -->
<P732>{$account.2.register_expires}</P732>
<!-- SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30) -->
<!-- Number: 1 to 3600 -->
<!-- Mandatory -->
<P471>30</P471>
<!-- SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec. -->
<!-- Number 0 to 3600 -->
<!-- Mandatory -->
<P26102>1200</P26102>
<!-- Reregister before Expiration -->
<!-- Number -->
<!-- Mandatory -->
<P2430>0</P2430>
<!-- Local SIP port (default 5060) -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P740>5060</P740>
<!-- Use Random SIP Port 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P778>0</P778>
<!-- SIP T1 Timeout. RFC 3261 T1 value. -->
<!-- 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. -->
<!-- Number: 50,100,200,400,800 -->
<!-- Mandatory -->
<P440>50</P440>
<!-- SIP T2 Timeout. RFC 3261 T2 value. -->
<!-- 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!-- Number: 1600,3200,200,400,800 -->
<!-- Mandatory -->
<P441>400</P441>
<!-- SIP TIMER D. Config Timer D defined in RFC 3261. -->
<!-- Range 0-64 sec. Default 0 -->
<!-- Number: 0-64 -->
<!-- Mandatory -->
<P2487>0</P2487>
<!-- Remove OBP from Route Header. 0 - no, 1 - yes -->
<!-- NUmber: 0,1 -->
<!-- Mandatory -->
<P4563>0</P4563>
<!-- Support SIP Instance ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P489>1</P489>
<!-- Hold Target Before Refer 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P26103>1</P26103>
<!-- Refer-To Use Target Contact. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P469></P469>
<!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($subscribe_mwi)}
<P709>{$subscribe_mwi}</P709>
{else}
<P709>0</P709>
{/if}
<!-- Enable 100rel. 0 - No, 1 - Yes -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P435>0</P435>
<!-- Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P763>0</P763>
<!-- Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P4895>0</P4895>
<!-- Disable Multiple m Line in SDP. 0 - No, 1 - Yes -->
<P487>0</P487>
<!-- Use Privacy Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2438>0</P2438>
<!-- Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2439>0</P2439>
<!-- ########################################### -->
<!-- # Profile 2/SIP Settings/Session Timer ## -->
<!-- ########################################### -->
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<!-- Number: 90 to 64800 -->
<!-- Mandatory -->
<P434>180</P434>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!-- Number 90 to 64800 -->
<!-- Mandatory -->
<P427>90</P427>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P428>0</P428>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P429>0</P429>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P430>0</P430>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P432>0</P432>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!-- Number: 1,2 -->
<!-- Mandatory -->
<P433>1</P433>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P431>0</P431>
<!-- ############################################### -->
<!-- # Profile 2/SIP Settings/Security Settings ## -->
<!-- ############################################### -->
<!-- Validate Incoming Messages. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4341>0</P4341>
<!-- Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes) -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P449>0</P449>
<!-- Allow Incoming SIP Messages from SIP Proxy Only -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P743>0</P743>
<!-- Authenticate incoming INVITE -->
<!-- Number: 0,1 -->
<P2446>0</P2446>
<!-- Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2411>0</P2411>
<!-- Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2467>0</P2467>
<!-- Trusted CA certificates. -->
<!-- String -->
<P2486></P2486>
<!-- ############################### -->
<!-- # Profile 2/Audio Settings ## -->
<!-- ############################### -->
<!-- Preferred DTMF Method 1 -->
<!-- 100 - In-audio, 101 - RFC2833, 102 - SIP INFO -->
<!-- Priority 1 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P860>101</P860>
<!-- Preferred DTMF Method 2 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P861>102</P861>
<!-- Preferred DTMF Method 3 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P862>100</P862>
<!-- Disable DTMF Negotiation. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4826>0</P4826>
<!-- DTMF Payload Type -->
<!-- Number: 96 to 127 -->
<P779>101</P779>
<!-- Preferred Vocoder -->
<!-- 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, -->
<!-- 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band) -->
<!-- Choice 1. -->
<!-- Mandatory -->
<P757>0</P757>
<!-- Choice 2. -->
<!-- Mandatory -->
<P758>8</P758>
<!-- Choice 3. -->
<!-- Mandatory -->
<P759>4</P759>
<!-- Choice 4. -->
<!-- Mandatory -->
<P760>18</P760>
<!-- Choice 5. -->
<!-- Mandatory -->
<P761>2</P761>
<!-- Choice 6. -->
<!-- Mandatory -->
<P762>98</P762>
<!-- Choice 7. -->
<!-- Mandatory -->
<P814>104</P814>
<!-- Choice 8. -->
<!-- Mandatory -->
<P815>100</P815>
<!-- Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!-- Number: 1 to 4 -->
<P737>2</P737>
<!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P749>0</P749>
<!-- G726-32 Packing Mode. 0 - ITU, 1 - IETF -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2423>0</P2423>
<!-- iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P705>0</P705>
<!-- iLBC payload type. Between 96 and 127, default is 97. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P704>97</P704>
<!-- Disable OPUS stereo in SDP, default is 0. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P20530></P20530>
<!-- OPUS Payload Type, default is 125. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P2485>125</P2485>
<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4364>0</P4364>
<!-- SRTP Mode -->
<!-- 0=Disabled -->
<!-- 1=Enabled but not forced -->
<!-- 2=Enabled and forced -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P443>0</P443>
<!-- Crypto Life Time -->
<!-- 0=Disabled -->
<!-- 1=Enabled -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2463>1</P2463>
<!-- Silence Suppression (VAD). 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P750>0</P750>
<!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P831>1</P831>
<!-- Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P832>1</P832>
<!-- ############################## -->
<!-- # Profile 2/Call Settings ## -->
<!-- ############################## -->
<!-- Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P729>0</P729>
<!-- Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!-- String Max Length: 32 -->
<P766></P766>
<!-- Dial Plan -->
<!-- String Max Length: 1024 -->
<P4201>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ }</P4201>
<!-- <P4201>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ | \+x+ | \p\a\r\k\+*x+ }</P4201> -->
<!-- Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P772>1</P772>
<!-- No Key Entry Timeout. Default - 4 seconds. -->
<!-- Number: 1 to 15 -->
<!-- Mandatory -->
<P292>4</P292>
<!-- Offhook Auto-Dial Delay (default is 0) -->
<!-- String: 0 to 60 -->
<P4046>0</P4046>
<!-- Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All -->
<P751>1</P751>
<!-- Disable Call Waiting Caller ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P823>0</P823>
<!-- Disable Call Waiting Tone. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P817>0</P817>
<!-- Disable Visual MWI. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P869>0</P869>
<!-- Transfer on Conference Hangup. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4561>0</P4561>
<!-- Ring Timeout. (10-300, default is 60 seconds) -->
<!-- Number: 10 to 300 -->
<!-- Mandatory -->
<P816>60</P816>
<!-- Hunting Group Ring Timeout. (5-300, default is 20 seconds) -->
<!-- Number: 5 to 300 -->
<!-- Mandatory -->
<P4331>20</P4331>
<!-- Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes). -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P765>0</P765>
<!-- Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P446>0</P446>
<!-- Special Feature -->
<!-- 100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA. -->
<!-- Number: 100, 102, 108, 109, 111, 114, 119, 120 -->
<!-- Mandatory -->
<P767>100</P767>
<!-- ################# -->
<!-- # Profile 3 ## -->
<!-- ################# -->
<!-- ################################# -->
<!-- # Profile 3/General Settings ## -->
<!-- ################################# -->
<!-- Profile Active. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($account.3.password)}
<P501>1</P501>
{else}
<P501>0</P501>
{/if}
<!-- Primary SIP Server -->
<!-- String: serveraddress -->
<P547>{$account.3.server_address}</P547>
<!-- Failover SIP Server -->
<!-- String: serveraddress -->
<P997></P997>
<!-- Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4569>0</P4569>
<!-- Outbound Proxy -->
<!-- String: serveraddress -->
<P548>{$account.3.outbound_proxy}</P548>
<!-- Voice Mail Access Number -->
<!-- String -->
<P27682>*97</P27682>
<!-- ################################# -->
<!-- # Profile 3/Network Settings ## -->
<!-- ################################# -->
<!-- Layer 3 QoS SIP Diff-Serv (default 24) -->
<!-- Number -->
<!-- Mandatory -->
<P5048>24</P5048>
<!-- Layer 3 QoS RTP Diff-Serv (default 46) -->
<!-- Number -->
<!-- Mandatory -->
<P5052>46</P5052>
<!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!-- Number: 0,1,2,3 -->
<!-- Mandatory -->
{if isset($account.3.dns_mode) }
<P502>{$account.3.dns_mode}</P502>
{else}
<P502>0</P502>
{/if}
<!-- Primary IP -->
<!-- IP address -->
<P2508></P2508>
<!-- Backup IP1 -->
<!-- IP address -->
<P2509></P2509>
<!-- Backup IP2 -->
<!-- IP address -->
<P2510></P2510>
<!-- NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{if isset($grandstream_nat_traversal_3)}
<P630>{$grandstream_nat_traversal_3}</P630>
{else}
<P630>0</P630>
{/if}
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. -->
<!-- String: ipaddress -->
<P566></P566>
<!-- Proxy-Require (A SIP extension to enable firewall penetration) -->
<!-- String: ipaddress -->
<P592></P592>
<!-- ############################################ -->
<!-- # Profile 3/SIP Settings/Basic Settings ## -->
<!-- ############################################ -->
<!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{$tp=0}
{if $account.3.sip_transport == 'udp'}{$tp=0}{/if}
{if $account.3.sip_transport == 'tcp'}{$tp=1}{/if}
{if $account.3.sip_transport == 'tls'}{$tp=2}{/if}
{if $account.3.sip_transport == 'dns srv'}{$tp=1}{/if}
<P530>{$tp}</P530>
<!-- SIP Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P531>1</P531>
<!-- Unregister On Reboot. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P552>0</P552>
<!-- Add Auth Header On Initial REGISTER -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2559>0</P2559>
<!-- Outgoing call without Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P513>1</P513>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!-- Number: 1 to 64800 -->
<!-- Mandatory -->
<P532>{$account.3.register_expires}</P532>
<!-- SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30) -->
<!-- Number: 1 to 3600 -->
<!-- Mandatory -->
<P571>30</P571>
<!-- SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec. -->
<!-- Number 0 to 3600 -->
<!-- Mandatory -->
<P26202>1200</P26202>
<!-- Reregister before Expiration -->
<!-- Number -->
<!-- Mandatory -->
<P2530>0</P2530>
<!-- Local SIP port (default 5060) -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P640>5060</P640>
<!-- Use Random SIP Port 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P578>0</P578>
<!-- SIP T1 Timeout. RFC 3261 T1 value. -->
<!-- 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. -->
<!-- Number: 50,100,200,400,800 -->
<!-- Mandatory -->
<P540>50</P540>
<!-- SIP T2 Timeout. RFC 3261 T2 value. -->
<!-- 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!-- Number: 1600,3200,200,400,800 -->
<!-- Mandatory -->
<P541>400</P541>
<!-- SIP TIMER D. Config Timer D defined in RFC 3261. -->
<!-- Range 0-64 sec. Default 0 -->
<!-- Number: 0-64 -->
<!-- Mandatory -->
<P2587>0</P2587>
<!-- Remove OBP from Route Header. 0 - no, 1 - yes -->
<!-- NUmber: 0,1 -->
<!-- Mandatory -->
<P4564>0</P4564>
<!-- Support SIP Instance ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P589>1</P589>
<!-- Hold Target Before Refer 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P26203>1</P26203>
<!-- Refer-To Use Target Contact. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P569></P569>
<!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($subscribe_mwi)}
<P509>{$subscribe_mwi}</P509>
{else}
<P509>0</P509>
{/if}
<!-- Enable 100rel. 0 - No, 1 - Yes -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P535>0</P535>
<!-- Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P563>0</P563>
<!-- Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P4896>0</P4896>
<!-- Disable Multiple m Line in SDP. 0 - No, 1 - Yes -->
<P587>0</P587>
<!-- Use Privacy Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2538>0</P2538>
<!-- Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2539>0</P2539>
<!-- ########################################### -->
<!-- # Profile 3/SIP Settings/Session Timer ## -->
<!-- ########################################### -->
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<!-- Number: 90 to 64800 -->
<!-- Mandatory -->
<P534>180</P534>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!-- Number 90 to 64800 -->
<!-- Mandatory -->
<P527>90</P527>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P528>0</P528>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P629>0</P629>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P664>0</P664>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P632>0</P632>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!-- Number: 1,2 -->
<!-- Mandatory -->
<P533>1</P533>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P365>0</P365>
<!-- ############################################### -->
<!-- # Profile 3/SIP Settings/Security Settings ## -->
<!-- ############################################### -->
<!-- Validate Incoming Messages. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4342>0</P4342>
<!-- Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes) -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P549>0</P549>
<!-- Allow Incoming SIP Messages from SIP Proxy Only -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4043>0</P4043>
<!-- Authenticate incoming INVITE -->
<!-- Number: 0,1 -->
<P2546>0</P2546>
<!-- Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2511>0</P2511>
<!-- Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2567>0</P2567>
<!-- Trusted CA certificates. -->
<!-- String -->
<P2586></P2586>
<!-- ############################### -->
<!-- # Profile 3/Audio Settings ## -->
<!-- ############################### -->
<!-- Preferred DTMF Method 1 -->
<!-- 100 - In-audio, 101 - RFC2833, 102 - SIP INFO -->
<!-- Priority 1 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P560>101</P560>
<!-- Preferred DTMF Method 2 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P561>102</P561>
<!-- Preferred DTMF Method 3 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P562>100</P562>
<!-- Disable DTMF Negotiation. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4827>0</P4827>
<!-- DTMF Payload Type -->
<!-- Number: 96 to 127 -->
<P579>101</P579>
<!-- Preferred Vocoder -->
<!-- 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, -->
<!-- 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band) -->
<!-- Choice 1. -->
<!-- Mandatory -->
<P557>0</P557>
<!-- Choice 2. -->
<!-- Mandatory -->
<P558>8</P558>
<!-- Choice 3. -->
<!-- Mandatory -->
<P559>4</P559>
<!-- Choice 4. -->
<!-- Mandatory -->
<P660>18</P660>
<!-- Choice 5. -->
<!-- Mandatory -->
<P661>2</P661>
<!-- Choice 6. -->
<!-- Mandatory -->
<P662>98</P662>
<!-- Choice 7. -->
<!-- Mandatory -->
<P514>104</P514>
<!-- Choice 8. -->
<!-- Mandatory -->
<P515>100</P515>
<!-- Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!-- Number: 1 to 4 -->
<P4593>2</P4593>
<!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4350>0</P4350>
<!-- G726-32 Packing Mode. 0 - ITU, 1 - IETF -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2523>0</P2523>
<!-- iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P505>0</P505>
<!-- iLBC payload type. Between 96 and 127, default is 97. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P504>97</P504>
<!-- Disable OPUS stereo in SDP, default is 0. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P20531></P20531>
<!-- OPUS Payload Type, default is 125. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P2585>125</P2585>
<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4365>0</P4365>
<!-- SRTP Mode -->
<!-- 0=Disabled -->
<!-- 1=Enabled but not forced -->
<!-- 2=Enabled and forced -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P543>0</P543>
<!-- Crypto Life Time -->
<!-- 0=Disabled -->
<!-- 1=Enabled -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2563>1</P2563>
<!-- Silence Suppression (VAD). 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P550>0</P550>
<!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P631>1</P631>
<!-- Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P835>1</P835>
<!-- ############################## -->
<!-- # Profile 3/Call Settings ## -->
<!-- ############################## -->
<!-- Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P529>0</P529>
<!-- Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!-- String Max Length: 32 -->
<P666></P666>
<!-- Dial Plan -->
<!-- String Max Length: 1024 -->
<P4202>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ }</P4202>
<!-- <P4202>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ | \+x+ | \p\a\r\k\+*x+ }</P4202> -->
<!-- Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P572>1</P572>
<!-- No Key Entry Timeout. Default - 4 seconds. -->
<!-- Number: 1 to 15 -->
<!-- Mandatory -->
<P492>4</P492>
<!-- Offhook Auto-Dial Delay (default is 0) -->
<!-- String: 0 to 60 -->
<P4047>0</P4047>
<!-- Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All -->
<P551>1</P551>
<!-- Disable Call Waiting Caller ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P523>0</P523>
<!-- Disable Call Waiting Tone. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P517>0</P517>
<!-- Disable Visual MWI. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P669>0</P669>
<!-- Transfer on Conference Hangup. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4565>0</P4565>
<!-- Ring Timeout. (10-300, default is 60 seconds) -->
<!-- Number: 10 to 300 -->
<!-- Mandatory -->
<P516>60</P516>
<!-- Hunting Group Ring Timeout. (5-300, default is 20 seconds) -->
<!-- Number: 5 to 300 -->
<!-- Mandatory -->
<P4332>20</P4332>
<!-- Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes). -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P565>0</P565>
<!-- Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P546>0</P546>
<!-- Special Feature -->
<!-- 100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA. -->
<!-- Number: 100, 102, 108, 109, 111, 114, 119, 120 -->
<!-- Mandatory -->
<P567>100</P567>
<!-- ################ -->
<!-- # Profile 4 ## -->
<!-- ################ -->
<!-- ################################# -->
<!-- # Profile 4/General Settings ## -->
<!-- ################################# -->
<!-- Profile Active. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($account.4.password)}
<P601>1</P601>
{else}
<P601>0</P601>
{/if}
<!-- Primary SIP Server -->
<!-- String: serveraddress -->
<P602>{$account.4.server_address}</P602>
<!-- Failover SIP Server -->
<!-- String: serveraddress -->
<P998></P998>
<!-- Prefer Primary SIP Server. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4570>0</P4570>
<!-- Outbound Proxy -->
<!-- String: serveraddress -->
<P603>{$account.4.outbound_proxy}</P603>
<!-- Voice Mail Access Number -->
<!-- String -->
<P27683>*97</P27683>
<!-- ################################# -->
<!-- # Profile 4/Network Settings ## -->
<!-- ################################# -->
<!-- Layer 3 QoS SIP Diff-Serv (default 24) -->
<!-- Number -->
<!-- Mandatory -->
<P5049>24</P5049>
<!-- Layer 3 QoS RTP Diff-Serv (default 46) -->
<!-- Number -->
<!-- Mandatory -->
<P5053>46</P5053>
<!-- DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP . -->
<!-- Number: 0,1,2,3 -->
<!-- Mandatory -->
{if isset($account.4.dns_mode) }
<P608>{$account.4.dns_mode}</P608>
{else}
<P608>0</P608>
{/if}
<!-- Primary IP -->
<!-- IP address -->
<P2608></P2608>
<!-- Backup IP1 -->
<!-- IP address -->
<P2609></P2609>
<!-- Backup IP2 -->
<!-- IP address -->
<P2610></P2610>
<!-- NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{if isset($grandstream_nat_traversal_4)}
<P614>{$grandstream_nat_traversal_4}</P614>
{else}
<P614>0</P614>
{/if}
<!-- Use NAT IP. This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50. -->
<!-- String: ipaddress -->
<P4576></P4576>
<!-- Proxy-Require (A SIP extension to enable firewall penetration) -->
<!-- String: ipaddress -->
<P618></P618>
<!-- ############################################ -->
<!-- # Profile 4/SIP Settings/Basic Settings ## -->
<!-- ############################################ -->
<!-- SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
{$tp=0}
{if $account.4.sip_transport == 'udp'}{$tp=0}{/if}
{if $account.4.sip_transport == 'tcp'}{$tp=1}{/if}
{if $account.4.sip_transport == 'tls'}{$tp=2}{/if}
{if $account.4.sip_transport == 'dns srv'}{$tp=1}{/if}
<P4648>{$tp}</P4648>
<!-- SIP Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P610>1</P610>
<!-- Unregister On Reboot. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P611>0</P611>
<!-- Add Auth Header On Initial REGISTER -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2659>0</P2659>
<!-- Outgoing call without Registration. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4378>1</P4378>
<!-- Register Expiration (in minutes. default 1 hour, max 45 days) -->
<!-- Number: 1 to 64800 -->
<!-- Mandatory -->
<P612>{$account.4.register_expires}</P612>
<!-- SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30) -->
<!-- Number: 1 to 3600 -->
<!-- Mandatory -->
<P671>30</P671>
<!-- SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec. -->
<!-- Number 0 to 3600 -->
<!-- Mandatory -->
<P26302>1200</P26302>
<!-- Reregister before Expiration -->
<!-- Number -->
<!-- Mandatory -->
<P2630>0</P2630>
<!-- Local SIP port (default 5060) -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P613>5060</P613>
<!-- Use Random SIP Port 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4792>0</P4792>
<!-- SIP T1 Timeout. RFC 3261 T1 value. -->
<!-- 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100. -->
<!-- Number: 50,100,200,400,800 -->
<!-- Mandatory -->
<P4640>50</P4640>
<!-- SIP T2 Timeout. RFC 3261 T2 value. -->
<!-- 200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400. -->
<!-- Number: 1600,3200,200,400,800 -->
<!-- Mandatory -->
<P641>400</P641>
<!-- SIP TIMER D. Config Timer D defined in RFC 3261. -->
<!-- Range 0-64 sec. Default 0 -->
<!-- Number: 0-64 -->
<!-- Mandatory -->
<P2687></P2687>
<!-- Remove OBP from Route Header. 0 - no, 1 - yes -->
<!-- NUmber: 0,1 -->
<!-- Mandatory -->
<P4790>0</P4790>
<!-- Support SIP Instance ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P689>1</P689>
<!-- Hold Target Before Refer 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P26303>1</P26303>
<!-- Refer-To Use Target Contact. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4649></P4649>
<!-- SUBSCRIBE for MWI. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
{if isset($subscribe_mwi)}
<P615>{$subscribe_mwi}</P615>
{else}
<P615>0</P615>
{/if}
<!-- Enable 100rel. 0 - No, 1 - Yes -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P635>0</P635>
<!-- Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P609>0</P609>
<!-- Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P4897>0</P4897>
<!-- Disable Multiple m Line in SDP. 0 - No, 1 - Yes -->
<P687>0</P687>
<!-- Use Privacy Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2638>0</P2638>
<!-- Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes -->
<!-- Number: 0, 1, 2 -->
<!-- Mandatory -->
<P2639>0</P2639>
<!-- ########################################### -->
<!-- # Profile 4/SIP Settings/Session Timer ## -->
<!-- ########################################### -->
<!-- Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535) -->
<!-- Number: 90 to 64800 -->
<!-- Mandatory -->
<P4634>180</P4634>
<!-- Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260) -->
<!-- Number 90 to 64800 -->
<!-- Mandatory -->
<P627>90</P627>
<!-- Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P628>0</P628>
<!-- Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4629>0</P4629>
<!-- Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4630>0</P4630>
<!-- UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P4632>0</P4632>
<!-- UAS Specify Refresher. 1 - UAC, 2 - UAS -->
<!-- Number: 1,2 -->
<!-- Mandatory -->
<P633>1</P633>
<!-- Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4631>0</P4631>
<!-- ############################################### -->
<!-- # Profile 4/SIP Settings/Security Settings ## -->
<!-- ############################################### -->
<!-- Validate Incoming Messages. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4343>0</P4343>
<!-- Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes) -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P649>0</P649>
<!-- Allow Incoming SIP Messages from SIP Proxy Only -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4044>0</P4044>
<!-- Authenticate incoming INVITE -->
<!-- Number: 0,1 -->
<P2646>0</P2646>
<!-- Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2611>0</P2611>
<!-- Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2667>0</P2667>
<!-- Trusted CA certificates. -->
<!-- String -->
<P2686></P2686>
<!-- ############################### -->
<!-- # Profile 4/Audio Settings ## -->
<!-- ############################### -->
<!-- Preferred DTMF Method 1 -->
<!-- 100 - In-audio, 101 - RFC2833, 102 - SIP INFO -->
<!-- Priority 1 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P4583>101</P4583>
<!-- Preferred DTMF Method 2 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P4584>102</P4584>
<!-- Preferred DTMF Method 3 -->
<!-- Number: 100 to 102 -->
<!-- Mandatory -->
<P4585>100</P4585>
<!-- Disable DTMF Negotiation. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4828>0</P4828>
<!-- DTMF Payload Type -->
<!-- Number: 96 to 127 -->
<P4574>101</P4574>
<!-- Preferred Vocoder -->
<!-- 0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16, -->
<!-- 102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band) -->
<!-- Choice 1. -->
<!-- Mandatory -->
<P651>0</P651>
<!-- Choice 2. -->
<!-- Mandatory -->
<P652>8</P652>
<!-- Choice 3. -->
<!-- Mandatory -->
<P653>4</P653>
<!-- Choice 4. -->
<!-- Mandatory -->
<P654>18</P654>
<!-- Choice 5. -->
<!-- Mandatory -->
<P655>2</P655>
<!-- Choice 6. -->
<!-- Mandatory -->
<P656>98</P656>
<!-- Choice 7. -->
<!-- Mandatory -->
<P4657>104</P4657>
<!-- Choice 8. -->
<!-- Mandatory -->
<P658>100</P658>
<!-- Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729) -->
<!-- Number: 1 to 4 -->
<P4594>2</P4594>
<!-- G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4349>0</P4349>
<!-- G726-32 Packing Mode. 0 - ITU, 1 - IETF -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P2623>0</P2623>
<!-- iLBC Frame Size. 0 - 20ms(default), 1 - 30ms. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P695>0</P695>
<!-- iLBC payload type. Between 96 and 127, default is 97. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P694>97</P694>
<!-- Disable OPUS stereo in SDP, default is 0. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P20532></P20532>
<!-- OPUS Payload Type, default is 125. -->
<!-- Number: 96 to 127 -->
<!-- Mandatory -->
<P2685>125</P2685>
<!-- Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4791>0</P4791>
<!-- SRTP Mode -->
<!-- 0=Disabled -->
<!-- 1=Enabled but not forced -->
<!-- 2=Enabled and forced -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P643>0</P643>
<!-- Crypto Life Time -->
<!-- 0=Disabled -->
<!-- 1=Enabled -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P2663>1</P2663>
<!-- Silence Suppression (VAD). 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P685>0</P685>
<!-- Jitter Buffer Type. 0 - Fixed, 1 - Adaptive -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P698>1</P698>
<!-- Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P697>1</P697>
<!-- ############################## -->
<!-- # Profile 4/Call Settings ## -->
<!-- ############################## -->
<!-- Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P622>0</P622>
<!-- Dial Plan Prefix.(this prefix string is added to each dialed number) -->
<!-- String Max Length: 32 -->
<P619></P619>
<!-- Dial Plan -->
<!-- String Max Length: 1024 -->
<P4203>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ }</P4203>
<!-- <P4203>{ x+ | *x+ | *xx | *xxx | *xxxx | *xxxxx | *xxxxxx | **xx | **xxx | **xxxx | **xxxxx | **xxxxxx | **xxxxxxx | **xxxxxxxx | *xx*x+ | \+x+ | \p\a\r\k\+*x+ }</P4203> -->
<!-- Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P692>1</P692>
<!-- No Key Entry Timeout. Default - 4 seconds. -->
<!-- Number: 1 to 15 -->
<!-- Mandatory -->
<P4588>4</P4588>
<!-- Offhook Auto-Dial Delay (default is 0) -->
<!-- String: 0 to 60 -->
<P4048>0</P4048>
<!-- Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All -->
<P620>1</P620>
<!-- Disable Call Waiting Caller ID. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4578>0</P4578>
<!-- Disable Call Waiting Tone. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4579>0</P4579>
<!-- Disable Visual MWI. 0 - No, 1 - Yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4375>0</P4375>
<!-- Transfer on Conference Hangup. 0 - no, 1 - yes -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P4566>0</P4566>
<!-- Ring Timeout. (10-300, default is 60 seconds) -->
<!-- Number: 10 to 300 -->
<!-- Mandatory -->
<P676>60</P676>
<!-- Hunting Group Ring Timeout. (5-300, default is 20 seconds) -->
<!-- Number: 5 to 300 -->
<!-- Mandatory -->
<P4333>20</P4333>
<!-- Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes). -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P621>0</P621>
<!-- Anonymous Call Rejection. 0 - No, 1 - Yes. -->
<!-- Number: 0 to 1 -->
<!-- Mandatory -->
<P646>0</P646>
<!-- Special Feature -->
<!-- 100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA. -->
<!-- Number: 100, 102, 108, 109, 111, 114, 119, 120 -->
<!-- Mandatory -->
<P624>100</P624>
<!-- ########### -->
<!-- # DECT ## -->
<!-- ########### -->
<!-- ############################ -->
<!-- # DECT/General Settings ## -->
<!-- ############################ -->
<!-- Base Station Name. Sets the display name of this base station -->
<!-- String -->
<P27001>DP750</P27001>
<!-- Admin PIN Code. Sets the admin PIN code for authentication, default is 0000. -->
<!-- Number: 4 digit number -->
<!-- Mandatory -->
<P27008>0000</P27008>
<!-- Enable Repeater Mode. 0 - No, 1 - Yes. Default is 0 - No. Enable repeater mode to allow repeater pair with DP750. Need reboot to take effect. -->
<!-- To pair with repeater, need enable DP750 subscription first. User can do it by Clicking "Subscribe" button at Web -> Status Page -> DECT Status Page or the physical Page button on device back side. -->
<!-- Then power up repeater to scan for base and auto pair. -->
<!-- Repeater mode only support Europe region in 1.0.2.16. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
{if isset($grandstream_repeater_mode_enable) }
<P20002>{$grandstream_repeater_mode_enable}</P20002>
{else}
<P20002>0</P20002>
{/if}
<!-- Enable Repeater Management. 0 - No, 1 - Yes. Default is 0. -->
{if isset($grandstream_repeater_management_enable) }
<P27019>{$grandstream_repeater_management_enable}</P27019>
{else}
<P27019>0</P27019>
{/if}
<!-- Handset name. Displaying in handset screen. -->
<!-- Strings: maximum 10 characters. -->
<!-- Mandatory -->
<P27020>{$account.1.user_id}</P27020>
<P27021>{$account.2.user_id}</P27021>
<P27022>{$account.3.user_id}</P27022>
<P27023>{$account.4.user_id}</P27023>
<P27024>{$account.5.user_id}</P27024>
<!-- Handset Phonebook. 1 - PB1, 2 - PB2, 3 - PB3, 4 - PB4, 5 - PB5 -->
<!-- Mandatory -->
<P27040>1</P27040>
<P27041>2</P27041>
<P27042>3</P27042>
<P27043>4</P27043>
<P27044>5</P27044>
<!-- Offhook Auto-dial destination number. If configure this, the handset will auto-dial when offhook. -->
<P4210></P4210>
<P4211></P4211>
<P4212></P4212>
<P4213></P4213>
<P4214></P4214>
<!-- ################################ -->
<!-- # DECT/SIP Account Settings ## -->
<!-- ################################ -->
<!-- SIP User ID for SIP account 1 - 10. -->
<P4060>{$account.1.user_id}</P4060>
<P4061>{$account.2.user_id}</P4061>
<P4062>{$account.3.user_id}</P4062>
<P4063>{$account.4.user_id}</P4063>
<P4064>{$account.5.user_id}</P4064>
<P4065>{$account.6.user_id}</P4065>
<P4066>{$account.7.user_id}</P4066>
<P4067>{$account.8.user_id}</P4067>
<P4068>{$account.9.user_id}</P4068>
<P4069>{$account.10.user_id}</P4069>
<!-- Authenticate ID for SIP account 1 - 10. -->
<P4090>{$account.1.auth_id}</P4090>
<P4091>{$account.2.auth_id}</P4091>
<P4092>{$account.3.auth_id}</P4092>
<P4093>{$account.4.auth_id}</P4093>
<P4094>{$account.5.auth_id}</P4094>
<P4095>{$account.6.auth_id}</P4095>
<P4096>{$account.7.auth_id}</P4096>
<P4097>{$account.8.auth_id}</P4097>
<P4098>{$account.9.auth_id}</P4098>
<P4099>{$account.10.auth_id}</P4099>
<!-- Password for SIP account 1 - 10 -->
<P4120>{$account.1.password}</P4120>
<P4121>{$account.2.password}</P4121>
<P4122>{$account.3.password}</P4122>
<P4123>{$account.4.password}</P4123>
<P4124>{$account.5.password}</P4124>
<P4125>{$account.6.password}</P4125>
<P4126>{$account.7.password}</P4126>
<P4127>{$account.8.password}</P4127>
<P4128>{$account.9.password}</P4128>
<P4129>{$account.10.password}</P4129>
<!-- SIP Name for SIP account 1 - 10 -->
<P4180>{$account.1.display_name}</P4180>
<P4181>{$account.2.display_name}</P4181>
<P4182>{$account.3.display_name}</P4182>
<P4183>{$account.4.display_name}</P4183>
<P4184>{$account.5.display_name}</P4184>
<P4185>{$account.6.display_name}</P4185>
<P4186>{$account.7.display_name}</P4186>
<P4187>{$account.8.display_name}</P4187>
<P4188>{$account.9.display_name}</P4188>
<P4189>{$account.10.display_name}</P4189>
<!-- Profile Settings for SIP account 1 - 10. -->
<!-- Number: 0 - 3. 0 - Profile 1, 1 - Profile 2, 2 - Profile 3, 3 - Profile 4. Default is 0. -->
<!-- Mandatory -->
<P4150>0</P4150>
<P4151>0</P4151>
<P4152>0</P4152>
<P4153>0</P4153>
<P4154>0</P4154>
<P4155>0</P4155>
<P4156>0</P4156>
<P4157>0</P4157>
<P4158>0</P4158>
<P4159>0</P4159>
<!-- HS Mode. Set the hanging group mode for handset, set 1 - 5 to non-hanging group mode. -->
<!-- Number: 1 - 5; 101 - 104. 1 - HS1, 2 - HS2, 3 - HS3, 4 - HS4, 5 - HS5; 101 - Circular, 102 - Linear, 103 - Parallel, 104 - Shared. Default is 101. -->
<!-- Mandatory -->
{if isset($grandstream_hanging_group_mode) }
<P27080>{$grandstream_hanging_group_mode}</P27080>
<P27081>{$grandstream_hanging_group_mode}</P27081>
<P27082>{$grandstream_hanging_group_mode}</P27082>
<P27083>{$grandstream_hanging_group_mode}</P27083>
<P27084>{$grandstream_hanging_group_mode}</P27084>
<P27085>{$grandstream_hanging_group_mode}</P27085>
<P27086>{$grandstream_hanging_group_mode}</P27086>
<P27087>{$grandstream_hanging_group_mode}</P27087>
<P27088>{$grandstream_hanging_group_mode}</P27088>
<P27089>{$grandstream_hanging_group_mode}</P27089>
{else}
<P27080>101</P27080>
<P27081>101</P27081>
<P27082>101</P27082>
<P27083>101</P27083>
<P27084>101</P27084>
<P27085>101</P27085>
<P27086>101</P27086>
<P27087>101</P27087>
<P27088>101</P27088>
<P27089>101</P27089>
{/if}
<!-- Active. Configure if the account is active or disabled. 0 - Disabled, 1 - Active. -->
<!-- Number: 0, 1. Default is 1. -->
<P4595>1</P4595>
<P4596>1</P4596>
<P4597>1</P4597>
<P4598>1</P4598>
<P4599>1</P4599>
<P4600>1</P4600>
<P4601>1</P4601>
<P4602>1</P4602>
<P4603>1</P4603>
<P4604>1</P4604>
<!-- ################################# -->
<!-- # DECT/Handset Line Settings ## -->
<!-- ################################# -->
<!-- Handset Line Settings -->
<!-- HS 1 Line Settings -->
<!-- Number: 0 - 10, according with None and account 1 - 10. First line Default is 1 (account 1), other line have default is 0 - NULL. -->
{if isset($grandstream_handset_1_line_1_enable) }
<P4300>{$grandstream_handset_1_line_1_enable}</P4300>
{else}
<P4300>1</P4300>
{/if}
{if isset($grandstream_handset_1_line_2_enable) }
<P4301>{$grandstream_handset_1_line_2_enable}</P4301>
{else}
<P4301>0</P4301>
{/if}
{if isset($grandstream_handset_1_line_3_enable) }
<P4302>{$grandstream_handset_1_line_3_enable}</P4302>
{else}
<P4302>0</P4302>
{/if}
{if isset($grandstream_handset_1_line_4_enable) }
<P4303>{$grandstream_handset_1_line_4_enable}</P4303>
{else}
<P4303>0</P4303>
{/if}
{if isset($grandstream_handset_1_line_5_enable) }
<P4304>{$grandstream_handset_1_line_5_enable}</P4304>
{else}
<P4304>0</P4304>
{/if}
{if isset($grandstream_handset_1_line_6_enable) }
<P4305>{$grandstream_handset_1_line_6_enable}</P4305>
{else}
<P4305>0</P4305>
{/if}
{if isset($grandstream_handset_1_line_7_enable) }
<P4306>{$grandstream_handset_1_line_7_enable}</P4306>
{else}
<P4306>0</P4306>
{/if}
{if isset($grandstream_handset_1_line_8_enable) }
<P4307>{$grandstream_handset_1_line_8_enable}</P4307>
{else}
<P4307>0</P4307>
{/if}
{if isset($grandstream_handset_1_line_9_enable) }
<P4308>{$grandstream_handset_1_line_9_enable}</P4308>
{else}
<P4308>0</P4308>
{/if}
{if isset($grandstream_handset_1_line_10_enable) }
<P4309>{$grandstream_handset_1_line_10_enable}</P4309>
{else}
<P4309>0</P4309>
{/if}
<!-- HS 2 Line Settings -->
<!-- Number: 0 - 10, according with None and account 1 - 10. First line Default is 1 (account 1), other line have default is 0 - NULL. -->
{if isset($grandstream_handset_2_line_1_enable) }
<P4310>{$grandstream_handset_2_line_1_enable}</P4310>
{else}
<P4310>1</P4310>
{/if}
{if isset($grandstream_handset_2_line_2_enable) }
<P4311>{$grandstream_handset_2_line_2_enable}</P4311>
{else}
<P4311>0</P4311>
{/if}
{if isset($grandstream_handset_2_line_3_enable) }
<P4312>{$grandstream_handset_2_line_3_enable}</P4312>
{else}
<P4312>0</P4312>
{/if}
{if isset($grandstream_handset_2_line_4_enable) }
<P4313>{$grandstream_handset_2_line_4_enable}</P4313>
{else}
<P4313>0</P4313>
{/if}
{if isset($grandstream_handset_2_line_5_enable) }
<P4314>{$grandstream_handset_2_line_5_enable}</P4314>
{else}
<P4314>0</P4314>
{/if}
{if isset($grandstream_handset_2_line_6_enable) }
<P4315>{$grandstream_handset_2_line_6_enable}</P4315>
{else}
<P4315>0</P4315>
{/if}
{if isset($grandstream_handset_2_line_7_enable) }
<P4316>{$grandstream_handset_2_line_7_enable}</P4316>
{else}
<P4316>0</P4316>
{/if}
{if isset($grandstream_handset_2_line_8_enable) }
<P4317>{$grandstream_handset_2_line_8_enable}</P4317>
{else}
<P4317>0</P4317>
{/if}
{if isset($grandstream_handset_2_line_9_enable) }
<P4318>{$grandstream_handset_2_line_9_enable}</P4318>
{else}
<P4318>0</P4318>
{/if}
{if isset($grandstream_handset_2_line_10_enable) }
<P4319>{$grandstream_handset_2_line_10_enable}</P4319>
{else}
<P4319>0</P4319>
{/if}
<!-- HS 3 Line Settings -->
<!-- Number: 0 - 10, according with None and account 1 - 10. First line Default is 1 (account 1), other line have default is 0 - NULL. -->
{if isset($grandstream_handset_3_line_1_enable) }
<P4320>{$grandstream_handset_3_line_1_enable}</P4320>
{else}
<P4320>1</P4320>
{/if}
{if isset($grandstream_handset_3_line_2_enable) }
<P4321>{$grandstream_handset_3_line_2_enable}</P4321>
{else}
<P4321>0</P4321>
{/if}
{if isset($grandstream_handset_3_line_3_enable) }
<P4322>{$grandstream_handset_3_line_3_enable}</P4322>
{else}
<P4322>0</P4322>
{/if}
{if isset($grandstream_handset_3_line_4_enable) }
<P4323>{$grandstream_handset_3_line_4_enable}</P4323>
{else}
<P4323>0</P4323>
{/if}
{if isset($grandstream_handset_3_line_5_enable) }
<P4324>{$grandstream_handset_3_line_5_enable}</P4324>
{else}
<P4324>0</P4324>
{/if}
{if isset($grandstream_handset_3_line_6_enable) }
<P4325>{$grandstream_handset_3_line_6_enable}</P4325>
{else}
<P4325>0</P4325>
{/if}
{if isset($grandstream_handset_3_line_7_enable) }
<P4326>{$grandstream_handset_3_line_7_enable}</P4326>
{else}
<P4326>0</P4326>
{/if}
{if isset($grandstream_handset_3_line_8_enable) }
<P4327>{$grandstream_handset_3_line_8_enable}</P4327>
{else}
<P4327>0</P4327>
{/if}
{if isset($grandstream_handset_3_line_9_enable) }
<P4328>{$grandstream_handset_3_line_9_enable}</P4328>
{else}
<P4328>0</P4328>
{/if}
{if isset($grandstream_handset_3_line_10_enable) }
<P4329>{$grandstream_handset_3_line_10_enable}</P4329>
{else}
<P4329>0</P4329>
{/if}
<!-- HS 4 Line Settings -->
<!-- Number: 0 - 10, according with None and account 1 - 10. First line Default is 1 (account 1), other line have default is 0 - NULL. -->
{if isset($grandstream_handset_4_line_1_enable) }
<P4250>{$grandstream_handset_4_line_1_enable}</P4250>
{else}
<P4250>1</P4250>
{/if}
{if isset($grandstream_handset_4_line_2_enable) }
<P4251>{$grandstream_handset_4_line_2_enable}</P4251>
{else}
<P4251>0</P4251>
{/if}
{if isset($grandstream_handset_4_line_3_enable) }
<P21320>{$grandstream_handset_4_line_3_enable}</P21320>
{else}
<P21320>0</P21320>
{/if}
{if isset($grandstream_handset_4_line_4_enable) }
<P21321>{$grandstream_handset_4_line_4_enable}</P21321>
{else}
<P21321>0</P21321>
{/if}
{if isset($grandstream_handset_4_line_5_enable) }
<P21322>{$grandstream_handset_4_line_5_enable}</P21322>
{else}
<P21322>0</P21322>
{/if}
{if isset($grandstream_handset_4_line_6_enable) }
<P21323>{$grandstream_handset_4_line_6_enable}</P21323>
{else}
<P21323>0</P21323>
{/if}
{if isset($grandstream_handset_4_line_7_enable) }
<P21324>{$grandstream_handset_4_line_7_enable}</P21324>
{else}
<P21324>0</P21324>
{/if}
{if isset($grandstream_handset_4_line_8_enable) }
<P21325>{$grandstream_handset_4_line_8_enable}</P21325>
{else}
<P21325>0</P21325>
{/if}
{if isset($grandstream_handset_4_line_9_enable) }
<P21326>{$grandstream_handset_4_line_9_enable}</P21326>
{else}
<P21326>0</P21326>
{/if}
{if isset($grandstream_handset_4_line_10_enable) }
<P21327>{$grandstream_handset_4_line_10_enable}</P21327>
{else}
<P21327>0</P21327>
{/if}
<!-- HS 5 Line Settings -->
<!-- Number: 0 - 10, according with None and account 1 - 10. First line Default is 1 (account 1), other line have default is 0 - NULL. -->
{if isset($grandstream_handset_5_line_1_enable) }
<P21328>{$grandstream_handset_5_line_1_enable}</P21328>
{else}
<P21328>1</P21328>
{/if}
{if isset($grandstream_handset_5_line_2_enable) }
<P21329>{$grandstream_handset_5_line_2_enable}</P21329>
{else}
<P21329>0</P21329>
{/if}
{if isset($grandstream_handset_5_line_3_enable) }
<P21330>{$grandstream_handset_5_line_3_enable}</P21330>
{else}
<P21330>0</P21330>
{/if}
{if isset($grandstream_handset_5_line_4_enable) }
<P21331>{$grandstream_handset_5_line_4_enable}</P21331>
{else}
<P21331>0</P21331>
{/if}
{if isset($grandstream_handset_5_line_5_enable) }
<P21332>{$grandstream_handset_5_line_5_enable}</P21332>
{else}
<P21332>0</P21332>
{/if}
{if isset($grandstream_handset_5_line_6_enable) }
<P21333>{$grandstream_handset_5_line_6_enable}</P21333>
{else}
<P21333>0</P21333>
{/if}
{if isset($grandstream_handset_5_line_7_enable) }
<P21334>{$grandstream_handset_5_line_7_enable}</P21334>
{else}
<P21334>0</P21334>
{/if}
{if isset($grandstream_handset_5_line_8_enable) }
<P21335>{$grandstream_handset_5_line_8_enable}</P21335>
{else}
<P21335>0</P21335>
{/if}
{if isset($grandstream_handset_5_line_9_enable) }
<P21336>{$grandstream_handset_5_line_9_enable}</P21336>
{else}
<P21336>0</P21336>
{/if}
{if isset($grandstream_handset_5_line_10_enable) }
<P21337>{$grandstream_handset_5_line_10_enable}</P21337>
{else}
<P21337>0</P21337>
{/if}
<!-- ############### -->
<!-- # Settings ## -->
<!-- ############### -->
<!-- ################################ -->
<!-- # Settings/Network Settings ## -->
<!-- ################################ -->
<!-- ############################################### -->
<!-- # Settings/Network Settings/Basic Settings ## -->
<!-- ############################################### -->
<!-- IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<!-- Reboot required -->
<P8>0</P8>
<!-- Preferred DNS server -->
<!-- Mandatory -->
<P92>0</P92>
<P93>0</P93>
<P94>0</P94>
<P95>0</P95>
<!-- Host name (Option 12). Max length allowed is 32 bytes. -->
<!-- String: address -->
<P146></P146>
<!-- DHCP Domain -->
<!-- String: address -->
<P147></P147>
<!-- Vendor Class ID (Option 60). Max length allowed is 32 bytes. -->
<!-- String Max Length: 32 -->
<P148>DP7XX</P148>
<!-- PPPoE account ID -->
<!-- <P82></P82> -->
<!-- PPPoE password -->
<!-- <P83></P83> -->
<!-- PPPoE Service Name -->
<!-- String Max Length: 64 -->
<!-- Reboot required -->
<P269></P269>
<!-- IP Address. Ignore if DHCP or PPPoE is used -->
<!-- <P9>192</P9> -->
<!-- <P10>168</P10> -->
<!-- <P11>0</P11> -->
<!-- <P12>160</P12> -->
<!-- Subnet mask. Ignore if DHCP or PPPoE is used -->
<!-- <P13>255</P13> -->
<!-- <P14>255</P14> -->
<!-- <P15>0</P15> -->
<!-- <P16>0</P16> -->
<!-- Gateway. Ignore if DHCP or PPPoE is used -->
<!-- <P17>0</P17> -->
<!-- <P18>0</P18> -->
<!-- <P19>0</P19> -->
<!-- <P20>0</P20> -->
<!-- DNS server 1. Ignore if DHCP or PPPoE is used -->
<!-- <P21>0</P21> -->
<!-- <P22>0</P22> -->
<!-- <P23>0</P23> -->
<!-- <P24>0</P24> -->
<!-- DNS server 2. Ignore if DHCP or PPPoE is used -->
<!-- <P25>0</P25> -->
<!-- <P26>0</P26> -->
<!-- <P27>0</P27> -->
<!-- <P28>0</P28> -->
<!-- ################################################## -->
<!-- # Settings/Network Settings/Advanced Settings ## -->
<!-- ################################################## -->
<!-- 802.1X Mode. Enables/disables 802.1X mode. To enable 802.1X mode, this field should be set to EAP-MD5 -->
<!-- 0 - Close, 1 - EAP-MD5, 2 - EAP-TLS, 3-EAP-PEAP. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P7901>0</P7901>
<!-- 802.1X Identity. The Identity for the 802.1X mode. -->
<!-- String Max Length: 64 -->
<P7902></P7902>
<!-- MD5 Password. 802.1X mode MD5 Password. -->
<!-- String Max Length: 64 -->
<P7903></P7903>
<!-- Enable LLDP. 0 - Disable, 1 - Enable -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1684>1</P1684>
<!-- Enable VLAN。 Config to enable or disable virtual LAN. 0 - Disabled, 1 - Enabled. Default is 0 - disabled. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
{if isset($grandstream_lan_port_vlan) }
<P27004>1</P27004>
{else}
<P27004>0</P27004>
{/if}
<!-- Layer 2 QoS 802.1Q/VLAN Tag -->
<!-- Number -->
<!-- Mandatory -->
{if isset($grandstream_lan_port_vlan) }
<P51>{$grandstream_lan_port_vlan}</P51>
{else}
<P51>0</P51>
{/if}
<!-- Layer 2 QoS 802.1p Priority Value for SIP signaling -->
<!-- Number: 0 to 7 -->
<!-- Mandatory -->
{if isset($grandstream_qos_sip)}
<P5038>{$grandstream_qos_sip}</P5038>
{else}
<P5038>0</P5038>
{/if}
<!-- Layer 2 QoS 802.1p Priority Value for RTP media -->
<!-- Number: 0 to 7 -->
<!-- Mandatory -->
{if isset($grandstream_qos_rtp)}
<P5042>{$grandstream_qos_rtp}</P5042>
{else}
<P5042>0</P5042>
{/if}
<!-- Use STUN to detect network connectivity. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P474>0</P474>
<!-- STUN server -->
<!-- String: serveraddress -->
<P76>stun.ipvideotalk.com</P76>
<!-- Number of STUN Response Misses Allowed -->
<!-- Number: 3 to 15 -->
<!-- Mandatory -->
<P475>3</P475>
<!-- Keep-alive interval (in seconds. default 20 seconds) -->
<!-- Number: 10 to 160 -->
<!-- Mandatory -->
<P84>20</P84>
<!-- ########################## -->
<!-- # Settings/Ring Tones ## -->
<!-- ########################## -->
<!-- System Ring Cadence -->
<!-- Syntax: c=on1/ off1[- on2/ off2[- on3/ off3]](Cadence on and off are in 10 ms units) -->
<!-- String Max Length: 256 -->
<P4040>c=2000/4000;</P4040>
<!-- Call Progress Tones -->
<!-- Syntax: f1=val, f2=val[, c=on1/ off1[- on2/ off2[- on3/ off3]]](Frequencies are in Hz and cadence on and off are in 10 ms units) -->
<!-- Dial Tone -->
<!-- String Max Length: 256 -->
<P4000>f1=350@-17,f2=440@-17,c=0/0;</P4000>
<!-- Ringback Tone -->
<!-- String Max Length: 256 -->
<P4001>f1=440@-17,f2=480@-17,c=2000/4000;</P4001>
<!-- Busy Tone -->
<!-- String Max Length: 256 -->
<P4002>f1=480@-21,f2=620@-21,c=500/500;</P4002>
<!-- Reorder Tone -->
<!-- String Max Length: 256 -->
<P4003>f1=480@-21,f2=620@-21,c=250/250;</P4003>
<!-- Confirmation Tone -->
<!-- String Max Length: 256 -->
<P4004>f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;</P4004>
<!-- Call Waiting tone -->
<!-- String Max Length: 256 -->
<P4005>f1=440@-13,c=300/300-300/10000;</P4005>
<!-- ############################### -->
<!-- # Settings/System Features ## -->
<!-- ############################### -->
<!-- Disable Direct IP Call. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P277>0</P277>
<!-- ################## -->
<!-- # Maintenance ## -->
<!-- ################## -->
<!-- ################################### -->
<!-- # Maintenance/Firmware Upgrade ## -->
<!-- ################################### -->
<!-- Firmware Upgrade -->
<!-- Use firmware pre/postfix to determine if f/w is required -->
<!-- 0=Always Check for New Firmware -->
<!-- 1=Check New Firmware only when F/W pre/suffix changes -->
<!-- 2=Always Skip the Firmware Check -->
<!-- For Firmware only. -->
<!-- Number: 0,1,2 -->
<!-- Mandatory -->
<P238>0</P238>
<!-- HTTP/HTTPS User Name for firmware server -->
<!-- String Max Length: 40; between ascii values 33 and 126 -->
<P6768></P6768>
<!-- HTTP/HTTPS Password for firmware server -->
<!-- String Max Length: 40; between ascii values 33 and 126 -->
<!-- Mandatory -->
<P6769></P6769>
<!-- Always send HTTP Basic Authentication Information. 0 - No, 1- Yes. -->
<!-- Number: 0,1. Default is 0 -->
<!-- Mandatory -->
<P20718>0</P20718>
<!-- Verify host when using HTTPS. 0 - No, 1- Yes. -->
<!-- Number: 0,1. Default is 1 -->
<!-- Mandatory -->
<P20724>1</P20724>
<!-- Upgrade via. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade. -->
<!-- Number: 0 to 2 -->
<!-- Mandatory -->
<P6767>1</P6767>
<!-- Firmware Server Path -->
<!-- String: serveraddress -->
{if isset($grandstream_firmware_path) && isset($firmware_version)}
<P192>{$grandstream_firmware_path}/dp750/{$firmware_version}</P192>
{elseif isset($grandstream_firmware_path)}
<P192>{$grandstream_firmware_path}/dp750</P192>
{else}
<P192>{$domain_name}{$project_path}/app/provision</P192>
{/if}
<!-- Firmware File Prefix -->
<!-- String Max Length: 32; between ascii values 33 and 126 -->
<P232></P232>
<!-- Firmware File Postfix -->
<!-- String Max Length: 32; between ascii values 33 and 126 -->
<P233></P233>
<!-- Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1 -->
<!-- When set to Yes(1), it will override the configured provision path and method -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P20719>1</P20719>
<!-- Automatic Upgrade. 0 - No, 1 - Check daily, 2 - Check weekly, 3 - Check every () minutes. Default is No. -->
<!-- Number: 0,1,2,3 -->
<!-- Mandatory -->
<P20721>0</P20721>
<!-- Automatic Upgrade. Check for new firmware/config file every () minutes, unit is in minute, minimum 60 minutes, default is 7 days. P20721=3 -->
<!-- Number: 60 to 5256000 -->
<!-- Mandatory -->
<P20720>10080</P20720>
<!-- Automatic Upgrade. Daily at hour(0-23). Defines the hour of the day to check the HTTP/TFTP server for firmware upgrades. Default is 1. -->
<!-- Number: 0 to 23 -->
<!-- Mandatory -->
<P20722>1</P20722>
<!-- Automatic Upgrade. Weekly on day (0-6). 0 - Sunday, 1 - Monday. Defines the day of the week to check HTTP/TFTP server for firmware upgrades. Defalt is 1. -->
<!-- Number: 0 to 6 -->
<!-- Mandatory -->
<P20723>1</P20723>
<!-- Firmware Key (AES 128, in Hexadecimal Representation) -->
<!-- String Max Length: 32 0-9,A-Z,a-z -->
<P242></P242>
<!-- Automatic Upgrade handset firmware. -->
<!-- Number: 0 - No, 1 - Yes. Default is 0 - No. -->
<!-- Mandatory -->
<P27740>0</P27740>
<!-- ############################### -->
<!-- # Maintenance/Provisioning ## -->
<!-- ############################### -->
<!-- Lock keypad update. 0 - No, 1 - Yes. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P88>0</P88>
<!-- XML Config File Password -->
<!-- String Max Length: 40 -->
<!-- Mandatory; between ascii values 33 and 126 -->
<P1359></P1359>
<!-- HTTP/HTTPS User Name for config server -->
<!-- String Max Length: 40; between ascii values 33 and 126 -->
<P1360>{$http_auth_username}</P1360>
<!-- HTTP/HTTPS Password for config server -->
<!-- String Max Length: 40; between ascii values 33 and 126 -->
<!-- Mandatory -->
<P1361>{$http_auth_password}</P1361>
<!-- Always send HTTP Basic Authentication Information. 0 - No, 1- Yes. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P20713>0</P20713>
<!-- Verify host when using HTTPS. Verify host name in server certificate when using HTTPS. 0 - No, 1 - Yes. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P22030>0</P22030>
<!-- Provisioning via. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade. -->
<!-- Number: 0 to 2 -->
<!-- Mandatory -->
<P212>1</P212>
<!-- Config Server Path -->
<!-- String: serveraddress -->
{if $grandstream_config_server_path=="none"}
<P237></P237>
{elseif isset($grandstream_config_server_path)}
<P237>{$grandstream_config_server_path}</P237>
{else}
<P237>{$domain_name}{$project_path}/app/provision</P237>
{/if}
<!-- Config File Prefix -->
<!-- String Max Length: 32; between ascii values 33 and 126 -->
<P234></P234>
<!-- Config File Postfix -->
<!-- String Max Length: 32; between ascii values 33 and 126 -->
<P235></P235>
<!-- Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes. -->
<!-- When set to Yes(1), it will override the configured provision path and method. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<!-- Reboot required -->
<P145>1</P145>
<!-- Allow DHCP Option 120 to Override SIP Server -->
<!-- 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1411>0</P1411>
<!-- 3CX Auto Provision. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1414>1</P1414>
<!-- Automatic Provisioning. -->
<!-- 0 - No, -->
<!-- 1 - Yes, check for provisioning based on minute(s) setting, -->
<!-- 2 - Yes, check for provisioning based on Hour of Day setting, -->
<!-- 3 - Yes, check for provisioning based on Day of Week setting, -->
<!-- Default is No. -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
<P194>0</P194>
<!-- Automatic Provisioning. Check for new config file every () minutes. Default is 7 days. -->
<!-- Number: 60-86400 -->
<!-- Mandatory -->
<P193>10080</P193>
<!-- Automatic Provisioning. Hour of the Day (0-23). Defines the hour of the day to check the HTTP/TFTP server for configuration file changes. Default is 1. -->
<!-- Number: 0 - 23 -->
<P285>1</P285>
<!-- Automatic Provisioning. Day of the Week (0-6). Defines the day of the week to check HTTP/TFTP server for configuration file changes. Default is 1. -->
<!-- Number: 0-6 -->
<P286>1</P286>
<!-- Authenticate Conf File. 0 - No, 1 - Yes. Default is No -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P240>0</P240>
<!-- ################################# -->
<!-- # Maintenance/Web/SSH Access ## -->
<!-- ################################# -->
<!-- User Password -->
<!-- <P196>123</P196> -->
<P196>{$user_password}</P196>
<!-- Admin password -->
<!-- String Max Length: 30; between ascii values 33 and 126 -->
<!-- Mandatory -->
<!-- <P2>admin</P2> -->
<P2>{$admin_password}</P2>
<!-- White list for WAN side. Only the IP address in white list can access Web and Telnet. -->
<!-- String ipaddress -->
<P20701></P20701>
<!-- Black list for WAN side. The IP address in black list can not access Web or Telnet -->
<!-- String ipaddress -->
<P20701></P20701>
<!-- ########################### -->
<!-- # Maintenance/TR - 069 ## -->
<!-- ########################### -->
<!-- Enable TR-069. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P1409>0</P1409>
<!-- ACS URL. URL of the TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com, or IP address). -->
<!-- String -->
<!-- <P4503></P4503> -->
<!-- ACS Username. ACS username for TR-069. -->
<!-- String -->
<P4504></P4504>
<!-- ACS Password. ACS password for TR-069. -->
<!-- String -->
<P4505></P4505>
<!-- Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P4506>0</P4506>
<!-- Periodic Inform Interval. Default is 300. -->
<!-- Number -->
<P4507>300</P4507>
<!-- Connection Request Username -->
<!-- String: a-z, A-Z, 0-9 -->
<P4511></P4511>
<!-- Connection Request Password -->
<!-- String: a-z, A-Z, 0-9 -->
<P4512></P4512>
<!-- ##################################################### -->
<!-- # Maintenance/Security Settings/Web/SSH Settings ## -->
<!-- ##################################################### -->
<!-- HTTP Web Port. Default HTTP port is 80. -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<!-- Reboot required -->
<P901>80</P901>
<!-- HTTPS Web Port. Default HTTPS port is 443. -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<!-- Reboot required -->
<P27010>443</P27010>
<!-- Web Access Mode. 0 - HTTPS, 1 - HTTP. Default is 1 - HTTP. -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<!-- Reboot required -->
<P1650>1</P1650>
<!-- Disable SSH. 0 - No, 1 - Yes. Default is 0. -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P276>0</P276>
<!-- SSH Port. Port for SSH access. Default is 22. -->
<!-- Number: -->
<P27006>22</P27006>
<!-- ############################################ -->
<!-- # Maintenance/Security Settings/SIP TLS ## -->
<!-- ############################################ -->
<!-- SIP TLS Certificate -->
<!-- String -->
<!-- <P280></P280> -->
<!-- SIP TLS Private Key -->
<!-- String -->
<!-- <P279></P279> -->
<!-- SIP TLS Private Key Password -->
<!-- String -->
<!-- Max Length: 64 characters -->
<P281></P281>
<!-- ########################################### -->
<!-- # Maintenance/Security Settings/Radius ## -->
<!-- ########################################### -->
<!-- Primary RADIUS Server -->
<!-- <P4550></P4550> -->
<!-- Primary RADIUS Auth Port (default 1812). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4551>1812</P4551>
<!-- Primary RADIUS Acct Port (default 1813). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4552>1813</P4552>
<!-- Primary RADIUS Server Secret -->
<!-- String Max Length: 32 -->
<!-- Mandatory -->
<P4553></P4553>
<!-- Secondary RADIUS Server -->
<!-- <P4554></P4554> -->
<!-- Secondary RADIUS Auth Port (default 1812). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4555>1812</P4555>
<!-- Secondary RADIUS Acct Port (default 1813). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4556>1813</P4556>
<!-- Secondary RADIUS Server Secret -->
<!-- String Max Length: 32 -->
<!-- Mandatory -->
<P4557></P4557>
<!-- RADIUS Timeout (default 2). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4558>2</P4558>
<!-- RADIUS Retry (default 3). -->
<!-- Number: 1 to 65535 -->
<!-- Mandatory -->
<P4559>3</P4559>
<!-- ################################ -->
<!-- # Maintenance/Date and Time ## -->
<!-- ################################ -->
<!-- NTP Server -->
<!-- String: serveraddress -->
{if isset($ntp_server_primary)}
<P30>{$ntp_server_primary}</P30>
{else}
<P30>pool.ntp.org</P30>
{/if}
<!-- NTP Update Interval in minutes(5-1440)(Default is set to 60 minutes) -->
<!-- Number: 5 to 1440 -->
<!-- Mandatory -->
<P5005>60</P5005>
<!-- Allow DHCP Option 42 to NTP Server. (If DHCP Option 42 is enabled, the NTP server can be changed.) -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P144>1</P144>
<!-- Time Zone. Offset in minutes to GMT -->
<!-- <value="TZA+12"> GMT-12:00 </option> -->
<!-- <value="TZB+11"> GMT-11:00 </option> -->
<!-- <value="TZC+10"> GMT-10:00 </option> -->
<!-- <value="TZD+9"> GMT-09:00 </option> -->
<!-- <value="TZE+8"> GMT-08:00 </option> -->
<!-- <value="TZF+7"> GMT-07:00 </option> -->
<!-- <value="TZG+6"> GMT-06:00 </option> -->
<!-- <value="TZH+5"> GMT-05:00 </option> -->
<!-- <value="TZf+4:30"> GMT-04:30 </option> -->
<!-- <value="TZI+4"> GMT-04:00 </option> -->
<!-- <value="TZJ+3:30"> GMT-03:30 </option> -->
<!-- <value="TZK+3"> GMT-03:00 </option> -->
<!-- <value="TZL+2"> GMT-02:00 </option> -->
<!-- <value="TZM+1"> GMT-01:00 </option> -->
<!-- <value="TZN+0"> GMT </option> -->
<!-- <value="TZO-1"> GMT+01:00 </option> -->
<!-- <value="TZP-2"> GMT+02:00 </option> -->
<!-- <value="TZQ-3"> GMT+03:00 </option> -->
<!-- <value="TZR-4"> GMT+04:00 </option> -->
<!-- <value="TZS-5"> GMT+05:00 </option> -->
<!-- <value="TZT-5:30"> GMT+05:30 </option> -->
<!-- <value="TZU-5:45"> GMT+05:45 </option> -->
<!-- <value="TZV-6"> GMT+06:00 </option> -->
<!-- <value="TZW-6:30"> GMT+06:30 </option> -->
<!-- <value="TZX-7"> GMT+07:00 </option> -->
<!-- <value="TZY-8"> GMT+08:00 </option> -->
<!-- <value="TZZ-9"> GMT+09:00 </option> -->
<!-- <value="TZa-9:30"> GMT+09:30 </option> -->
<!-- <value="TZb-10"> GMT+10:00 </option> -->
<!-- <value="TZc-11"> GMT+11:00 </option> -->
<!-- <value="TZd-12"> GMT+12:00 </option> -->
<!-- <value="TZe-13"> GMT+13:00 </option> -->
<!-- <value="customize"> Self-Defined Time Zone </option> -->
<!-- Mandatory Category: string Max Length: 9 Range0: Min=a Max=z Range1: Min=A Max=Z Range2: Min=+ Max=: -->
{if isset($grandstream_gxp_time_zone)}
<P64>{$grandstream_gxp_time_zone}</P64>
{/if}
<!-- Self-Defined Time Zone -->
<!-- String Max Length: 32 a-z, A-Z, +,: -->
<P246>PST+8PDT,M3.2.0,M11.1.0</P246>
<!-- Allow DHCP Option 2 to override time zone (If DHCP Option 2 is enabled, the timezone can be offset.) -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P143>1</P143>
<!-- ######################### -->
<!-- # Maintenance/Syslog ## -->
<!-- ######################### -->
<!-- Syslog Server (name of the server, max length is 64 charactors) -->
<!-- String: serveraddress -->
<P207>{$grandstream_syslog_server}</P207>
<!-- Syslog Level (Default setting is NONE) -->
<!-- 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR -->
<!-- Number: 0,1,2,3,4 -->
<!-- Mandatory -->
{if isset($grandstream_syslog_level)}
<P208>{$grandstream_syslog_level}</P208>
{else}
<P208>0</P208>
{/if}
<!-- Send SIP Log (0 - No, 1 - Yes, Default set to No) -->
<!-- Number: 0,1 -->
{if isset($grandstream_send_sip_log)}
<P1387>{$grandstream_send_sip_log}</P1387>
{else}
<P1387>0</P1387>
{/if}
<!-- ################################# -->
<!-- # Maintenance/Packet Capture ## -->
<!-- ################################# -->
<!-- With RTP Packets. 0 - No, 1 - Yes. Default is 0 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P6007>0</P6007>
<!-- ################ -->
<!-- # Phonebook ## -->
<!-- ################ -->
<!-- ###################################### -->
<!-- # Phonebook/Global Phonebook Type ## -->
<!-- ###################################### -->
<!-- Global Phonebook Type. Select type of global phonebook to use. XML is stored locally on the base station, LDAP is stored remotely. 0 - XML, 1 - LDAP. Default is 0 - XML. -->
<!-- The Global Phonebook XML Settings and Phonebook/Global Phonebook LDAP Settings are depend on this settings. -->
<!-- If this is set to XML, then all Global Phonebook XML Settings will take effect while all the LDAP settings will be ignored. -->
<!-- If this is set to LDAP, then all the Global Phonebook LDAP Settings will take effect while all the XML settings will be ignored. -->
<!-- Number: 0, 1 -->
<P27002>0</P27002>
<!-- ############################################## -->
<!-- # Phonebook/Global Phonebook XML Settings ## -->
<!-- ############################################## -->
<!-- Enable Phonebook XML Download. # 0 - No, 1 - YES, HTTP, 2 - YES, TFTP, 3 - Yes, HTTPS. Default is 0 -->
<!-- Number: 0, 1, 2, 3 -->
<!-- Mandatory -->
{if isset($contact_grandstream)}
<P330>1</P330>
{else}
<P330>0</P330>
{/if}
<!-- HTTP/HTTPS User Name -->
<!-- String -->
<!-- P6713 -->
<!-- HTTP/HTTPS Password -->
<!-- String -->
<!-- P6714 -->
<!-- Phonebook XML Server Path -->
<!-- This is a string of up to 256 characters that should contain a path to the XML file. It MUST be in the host/path format. -->
<!-- For example: directory.grandstream.com/engineering -->
<!-- String -->
{if isset($contact_grandstream)}
<P331>{$grandstream_phonebook_xml_server_path}{$mac}/</P331>
{elseif isset($grandstream_phonebook_xml_server_path)}
<P331>{$grandstream_phonebook_xml_server_path}</P331>
{else}
<P331></P331>
{/if}
<!-- Phonebook Download Interval (in minutes) -->
<!-- Valid value range is 5-720. Default is 0 for disabled -->
<!-- Number: 0, 5-720; -->
<P332>120</P332>
<!-- Remove Manually-edited entries on Download. 0 - No, 1 - Yes. Default is 1 -->
<!-- Number: 0, 1 -->
<!-- Mandatory -->
<P333>1</P333>
<!-- ############################################### -->
<!-- # Phonebook/Global Phonebook LDAP Settings ## -->
<!-- ############################################### -->
<!-- LDAP protocol. 0 - LDAP, 1 - LDAPS -->
<!-- Number: 0,1 -->
<!-- Mandatory -->
<P8037>0</P8037>
<!-- LDAP Server Address, up to 256 characters can be used. It can be IP address or Domain name -->
<!-- String -->
<P8020>{$grandstream_ldap_server}</P8020>
<!-- LDAP Server Port. Default is 389. -->
<!-- Number: 1 - 65535 -->
<P8021>389</P8021>
<!-- Base. The LDAP search base refers to the location in the directory where the search is requested to begin -->
<!-- Example 1: dc=grandstream,dc=com -->
<!-- Example 2: ou=Boston, dc=grandstream,dc=com -->
<!-- String -->
<P8022>{$grandstream_ldap_base_dn}</P8022>
<!-- User name. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank -->
<!-- String -->
<P8023>{$ldap_username}</P8023>
<!-- Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds -->
<!-- String -->
<P8024>{$ldap_password}</P8024>
<!-- LDAP Number Filter -->
<!-- LDAP name filter is the filter used for name look ups. Please refer to user manual for examples -->
<!-- String -->
<P8025>{$grandstream_ldap_number_filter}</P8025>
<!-- LDAP Name Filter -->
<!-- LDAP name filter is the filter used for name look ups. Please refer to user manual for examples -->
<!-- String -->
<P8026>{$grandstream_ldap_name_filter}</P8026>
<!-- LDAP Version. Protocol version for the phone when send the bind requests -->
<!-- 2 - version 2, 3 - version 3. Default is 3 -->
<!-- Mandatory -->
<P8027>3</P8027>
<!-- LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result -->
<!-- The setting allows the users to configure multiple space separated name attributes -->
<!-- String -->
<P8028>{$grandstream_ldap_name_attr}</P8028>
<!-- LDAP Number Attributes. This setting specifies the “number” attributes of each record which are returned in the LDAP search result -->
<!-- The setting allows the users to configure multiple space separated number attributes -->
<!-- String -->
<P8029>{$grandstream_ldap_number_attr}</P8029>
<!-- LDAP Display Name. The entry information to be shown on phone LCD. Grandstream phones will display up to 3 fields -->
<!-- String -->
<P8030>givenName sn</P8030>
<!-- Max Hits. The setting specifies the maximum number of results to be returned by the LDAP server -->
<!-- If the value is set to 0, server will return all search results. Default is 500 -->
<!-- Number: 0 - 32000 -->
<!-- Mandatory -->
<P8031>500</P8031>
<!-- Search Timeout (in seconds). Default is 30 -->
<!-- The setting specifies how long the server should process the request and client waits for server to return -->
<!-- Number: 0 - 180 -->
<!-- Mandatory -->
<P8032>30</P8032>
<!-- Sort Results. This setting is used for sorting searching result. Default is 0 -->
<!-- Number: 0, 1. 0 - No, 1 - Yes. Default is 0 -->
<!-- Mandatory -->
<P8033>0</P8033>
<!-- LDAP Lookup -->
<!-- Incoming calls. 0 - No, 1 - Yes. Default is 0 -->
<P8035>1</P8035>
<!-- Outgoing calls. 0 - No, 1 - Yes. Default is 0 -->
<P8034>1</P8034>
<!-- Lookup Display Name -->
<!-- String -->
<P8036>givenName sn</P8036>
<!-- ########################################### -->
<!-- # Phonebook/Private Phonebook Settings ## -->
<!-- ########################################### -->
<!-- Phonebook 1 Name. Default is PB1 -->
<!-- String -->
<P27060>PB1</P27060>
<!-- Phonebook 2 Name. Default is PB2 -->
<!-- String -->
<P27061>PB2</P27061>
<!-- Phonebook 3 Name. Default is PB3 -->
<!-- String -->
<P27062>PB3</P27062>
<!-- Phonebook 4 Name. Default is PB4 -->
<!-- String -->
<P27063>PB4</P27063>
<!-- Phonebook 5 Name. Default is PB5 -->
<!-- String -->
<P27064>PB5</P27064></config>
</gs_provision>
Reference in New Issue View Git Blame Copy Permalink