3081 lines
137 KiB
INI
3081 lines
137 KiB
INI
#!version:1.0.0.1
|
|
#{$microtime}
|
|
|
|
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
|
|
|
|
#######################################################################################
|
|
## Account 1 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.1.password) }
|
|
account.1.enable = 1
|
|
{else}
|
|
account.1.enable = 0
|
|
{/if}
|
|
account.1.label = {$account.1.display_name}
|
|
account.1.display_name = {$account.1.display_name}
|
|
account.1.auth_name = {$account.1.auth_id}
|
|
account.1.password = {$account.1.password}
|
|
{if isset($account.1.server.1.address)}
|
|
account.1.user_name = {$account.1.user_id}@{$account.1.server_address}
|
|
{else}
|
|
account.1.user_name = {$account.1.user_id}
|
|
{/if}
|
|
account.1.sip_server_host = {$account.1.server_address}
|
|
account.1.sip_server_port = {$account.1.sip_port}
|
|
account.1.outbound_host = {$account.1.outbound_proxy}
|
|
account.1.outbound_port = {$account.1.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.1.sip_listen_port = {$yealink_sip_listen_port}{else}account.1.sip_listen_port = 5060{/if}
|
|
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.1.sip_transport == 'udp'}account.1.transport = 0{/if}
|
|
{if $account.1.sip_transport == 'tcp'}account.1.transport = 1{/if}
|
|
{if $account.1.sip_transport == 'tls'}account.1.transport = 2{/if}
|
|
{if $account.1.sip_transport == 'dns srv'}account.1.transport = 3{/if}
|
|
|
|
account.1.outbound_proxy.1.address = {$account.1.outbound_proxy_primary}
|
|
account.1.outbound_proxy.2.address = {$account.1.outbound_proxy_secondary}
|
|
account.1.outbound_proxy_enable = {if isset($account.1.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
{if isset($outbound_proxy_1_port)}
|
|
account.1.outbound_proxy.1.port = {$outbound_proxy_1_port}
|
|
{else}
|
|
account.1.outbound_proxy.1.port = {$account.1.sip_port}
|
|
{/if}
|
|
{if isset($outbound_proxy_1_port)}
|
|
account.1.outbound_proxy.2.port = {$outbound_proxy_2_port}
|
|
{else}
|
|
account.1.outbound_proxy.2.port = {$account.1.sip_port}
|
|
{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.1.reregister_enable = 0
|
|
account.1.retry_counts =
|
|
account.1.failback_mode = 0
|
|
account.1.failback_timeout = 3600
|
|
account.1.naptr_build = 0
|
|
account.1.fallback.redundancy_type = 0
|
|
account.1.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.1.sip_server.1.address = {$account.1.server.1.address}
|
|
account.1.sip_server.1.port = {$account.1.sip_port}
|
|
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS-NAPTR;
|
|
{if $account.1.sip_transport == 'udp'}account.1.sip_server.1.transport_type = 0{/if}
|
|
{if $account.1.sip_transport == 'tcp'}account.1.sip_server.1.transport_type = 1{/if}
|
|
{if $account.1.sip_transport == 'tls'}account.1.sip_server.1.transport_type = 2{/if}
|
|
{if $account.1.sip_transport == 'dns srv'}account.1.sip_server.1.transport_type = 3{/if}
|
|
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.1.sip_server.1.expires = {$account.1.register_expires}
|
|
account.1.sip_server.1.retry_counts = 3
|
|
account.1.sip_server.1.failback_mode = 0
|
|
account.1.sip_server.1.failback_timeout = 3600
|
|
account.1.sip_server.1.register_on_enable = 0
|
|
account.1.sip_server.2.address = {$account.1.server.2.address}
|
|
account.1.sip_server.2.port = {$account.1.sip_port}
|
|
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS-NAPTR;
|
|
{if $account.1.sip_transport == 'udp'}account.1.sip_server.2.transport_type = 0{/if}
|
|
{if $account.1.sip_transport == 'tcp'}account.1.sip_server.2.transport_type = 1{/if}
|
|
{if $account.1.sip_transport == 'tls'}account.1.sip_server.2.transport_type = 2{/if}
|
|
{if $account.1.sip_transport == 'dns srv'}account.1.sip_server.2.transport_type = 3{/if}
|
|
|
|
account.1.sip_server.2.expires = {$account.1.register_expires}
|
|
account.1.sip_server.2.retry_counts = 3
|
|
account.1.sip_server.2.failback_mode = 0
|
|
account.1.sip_server.2.failback_timeout = 3600
|
|
account.1.sip_server.2.register_on_enable = 0
|
|
account.1.dns_cache_type = 1
|
|
|
|
account.1.dns_cache_a.1.name =
|
|
account.1.dns_cache_a.1.ip =
|
|
account.1.dns_cache_a.1.ttl = 300
|
|
|
|
account.1.dns_cache_srv.1.name =
|
|
account.1.dns_cache_srv.1.port = 0
|
|
account.1.dns_cache_srv.1.priority = 0
|
|
account.1.dns_cache_srv.1.target =
|
|
account.1.dns_cache_srv.1.weight = 0
|
|
account.1.dns_cache_srv.1.ttl = 300
|
|
account.1.dns_cache_naptr.1.name =
|
|
account.1.dns_cache_naptr.1.flags =
|
|
account.1.dns_cache_naptr.1.order = 0
|
|
account.1.dns_cache_naptr.1.preference = 0
|
|
account.1.dns_cache_naptr.1.replace =
|
|
account.1.dns_cache_naptr.1.service =
|
|
account.1.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.1.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.1.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.1.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.1.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.1.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.1.srv_ttl_timer_enable =
|
|
account.1.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.1.register_mac =
|
|
account.1.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.1.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.1.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.1.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.1.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.1.nat.udp_update_enable = 3
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.1.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.1.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## AccountX Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.1.advanced.timer_t1 =
|
|
account.1.advanced.timer_t2 =
|
|
account.1.advanced.timer_t4 =
|
|
|
|
voice_mail.number.1 = {$voicemail_number}
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.1.subscribe_mwi = 1
|
|
account.1.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.1.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.1.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.1.blf.blf_list_uri =
|
|
|
|
account.1.blf_list_code =
|
|
account.1.blf_list_barge_in_code =
|
|
account.1.blf.subscribe_period = 1800
|
|
|
|
account.1.blf.subscribe_event =
|
|
account.1.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.1.shared_line) }
|
|
account.1.shared_line = {$account.1.shared_line}
|
|
{else}
|
|
account.1.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.1.bla_number =
|
|
account.1.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.1.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.1.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.1.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.1.codec.Y.rtpmap =
|
|
|
|
account.1.codec.1.enable = {if isset($yealink_codec_pcmu_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.1.payload_type = PCMU
|
|
account.1.codec.1.priority = {if isset($yealink_codec_pcmu_priority)}{$yealink_codec_pcmu_priority}{else}0{/if}
|
|
|
|
account.1.codec.1.rtpmap = 0
|
|
|
|
account.1.codec.2.enable = {if isset($yealink_codec_pcma_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.2.payload_type = PCMA
|
|
account.1.codec.2.priority = {if isset($yealink_codec_pcma_priority)}{$yealink_codec_pcma_priority}{else}0{/if}
|
|
|
|
account.1.codec.2.rtpmap = 8
|
|
|
|
account.1.codec.3.enable = {if isset($yealink_codec_g723_53_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.3.payload_type = G723_53
|
|
account.1.codec.3.priority ={if isset($yealink_codec_g723_53_priority)}{$yealink_codec_g723_53_priority}{else}0{/if}
|
|
|
|
account.1.codec.3.rtpmap = 4
|
|
|
|
account.1.codec.4.enable = {if isset($yealink_codec_g723_63_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.4.payload_type = G723_63
|
|
account.1.codec.4.priority = {if isset($yealink_codec_g723_63_priority)}{$yealink_codec_g723_63_priority}{else}0{/if}
|
|
|
|
account.1.codec.4.rtpmap = 4
|
|
|
|
account.1.codec.5.enable = {if isset($yealink_codec_g729_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.5.payload_type = G729
|
|
account.1.codec.5.priority = {if isset($yealink_codec_g729_priority)}{$yealink_codec_g729_priority}{else}0{/if}
|
|
|
|
account.1.codec.5.rtpmap = 18
|
|
|
|
account.1.codec.6.enable = {if isset($yealink_codec_g722_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.6.payload_type = G722
|
|
account.1.codec.6.priority = {if isset($yealink_codec_g722_priority)}{$yealink_codec_g722_priority}{else}0{/if}
|
|
|
|
account.1.codec.6.rtpmap = 9
|
|
|
|
account.1.codec.7.enable = {if isset($yealink_codec_iLBC_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.7.payload_type = iLBC
|
|
account.1.codec.7.priority = {if isset($yealink_codec_iLBC_priority)}{$yealink_codec_iLBC_priority}{else}0{/if}
|
|
|
|
account.1.codec.7.rtpmap = 106
|
|
|
|
account.1.codec.8.enable = {if isset($yealink_codec_g726_16_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.8.payload_type = G726-16
|
|
account.1.codec.8.priority = {if isset($yealink_codec_g726_16_priority)}{$yealink_codec_g726_16_priority}{else}0{/if}
|
|
|
|
account.1.codec.8.rtpmap = 103
|
|
|
|
account.1.codec.9.enable = {if isset($yealink_codec_g726_24_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.9.payload_type = G726-24
|
|
account.1.codec.9.priority = {if isset($yealink_codec_g726_24_priority)}{$yealink_codec_g726_24_priority}{else}0{/if}
|
|
|
|
account.1.codec.9.rtpmap = 104
|
|
|
|
account.1.codec.10.enable = {if isset($yealink_codec_g726_32_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.10.payload_type = G726-32
|
|
account.1.codec.10.priority = {if isset($yealink_codec_g726_32_priority)}{$yealink_codec_g726_32_priority}{else}0{/if}
|
|
|
|
account.1.codec.10.rtpmap = 102
|
|
|
|
account.1.codec.11.enable = {if isset($yealink_codec_g726_40_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.11.payload_type = G726-40
|
|
account.1.codec.11.priority = {if isset($yealink_codec_g726_40_priority)}{$yealink_codec_g726_40_priority}{else}0{/if}
|
|
|
|
account.1.codec.11.rtpmap = 105
|
|
|
|
account.1.codec.12.enable = {if isset($yealink_codec_gsm_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.12.payload_type = GSM
|
|
account.1.codec.12.priority = {if isset($yealink_codec_gsm_priority)}{$yealink_codec_gsm_priority}{else}0{/if}
|
|
|
|
account.1.codec.12.rtpmap = 3
|
|
|
|
account.1.codec.13.enable = {if isset($yealink_codec_opus_enable)}1{else}0{/if}
|
|
|
|
account.1.codec.13.payload_type = opus
|
|
account.1.codec.13.priority = {if isset($yealink_codec_opus_priority)}{$yealink_codec_opus_priority}{else}0{/if}
|
|
|
|
account.1.codec.13.rtpmap = 106
|
|
|
|
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.1.srtp_encryption = {$yealink_srtp_encryption}
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.1.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.1.anonymous_call = 0
|
|
account.1.anonymous_call_oncode =
|
|
account.1.anonymous_call_offcode =
|
|
|
|
account.1.reject_anonymous_call =
|
|
account.1.anonymous_reject_oncode =
|
|
account.1.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.1.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.1.group_pickup_code =
|
|
account.1.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.1.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.1.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.1.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.1.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account1. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.1.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.1.ringtone.ring_type = Resource:Ring2.wav
|
|
account.1.ringtone.ring_type =
|
|
|
|
account.1.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.1.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.1.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid_source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.1.cid_source = {$yealink_cid_source}
|
|
|
|
account.1.cid_source_privacy = 1
|
|
account.1.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.1.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.1.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.1.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.1.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.1.music_on_hold_type =
|
|
|
|
account.1.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.1.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.1.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.1.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.1.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.1.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.1.dnd.enable =
|
|
account.1.dnd.on_code =
|
|
account.1.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
|
|
account.1.always_fwd.enable =
|
|
account.1.always_fwd.target =
|
|
account.1.always_fwd.off_code =
|
|
account.1.always_fwd.on_code =
|
|
|
|
account.1.busy_fwd.enable =
|
|
account.1.busy_fwd.target =
|
|
account.1.busy_fwd.off_code =
|
|
account.1.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.1.timeout_fwd.enable =
|
|
account.1.timeout_fwd.target =
|
|
account.1.timeout_fwd.timeout =
|
|
account.1.timeout_fwd.off_code =
|
|
account.1.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.1.hoteling.enable = 0
|
|
account.1.hoteling.user_id = 0
|
|
account.1.hoteling.password = 0
|
|
account.1.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.1.acd.enable = 0
|
|
account.1.acd.unavailable_reason_enable = 0
|
|
account.1.acd.available = 0
|
|
account.1.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.1.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.1.bw_acd_reason_code.1 =
|
|
|
|
account.1.reason_code.1 =
|
|
account.1.reason_code_name.1 = 0
|
|
account.1.bw_disp_code.1 =
|
|
account.1.bw_disp_code_name.1 =
|
|
account.1.supervisor_info_code.1 =
|
|
account.1.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.1.call_center.call_info_enable = 0
|
|
account.1.call_center.show_call_info_time = 30
|
|
account.1.call_center.disp_code_enable = 0
|
|
account.1.call_center.trace_enable = 0
|
|
account.1.call_center.emergency_enable = 0
|
|
account.1.call_center.queue_status_enable = 0
|
|
account.1.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.1.xsi.user =
|
|
account.1.xsi.password =
|
|
account.1.xsi.host =
|
|
account.1.xsi.server_type =
|
|
account.1.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## Account 2 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.2.password) }
|
|
account.2.enable = 1
|
|
{else}
|
|
account.2.enable = 0
|
|
{/if}
|
|
account.2.label = {$account.2.display_name}
|
|
account.2.display_name = {$account.2.display_name}
|
|
account.2.auth_name = {$account.2.auth_id}
|
|
account.2.password = {$account.2.password}
|
|
{if isset($account.2.server.1.address)}
|
|
account.2.user_name = {$account.2.user_id}@{$account.2.server_address}
|
|
{else}
|
|
account.2.user_name = {$account.2.user_id}
|
|
{/if}
|
|
account.2.sip_server_host = {$account.2.server_address}
|
|
account.2.sip_server_port = {$account.2.sip_port}
|
|
account.2.outbound_host = {$account.2.outbound_proxy}
|
|
|
|
account.2.outbound_port = {$account.2.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.2.sip_listen_port = {$yealink_sip_listen_port}{else}account.2.sip_listen_port = 5060{/if}
|
|
|
|
account.2.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.2.sip_transport == 'udp'}account.2.transport = 0{/if}
|
|
{if $account.2.sip_transport == 'tcp'}account.2.transport = 1{/if}
|
|
{if $account.2.sip_transport == 'tls'}account.2.transport = 2{/if}
|
|
{if $account.2.sip_transport == 'dns srv'}account.2.transport = 3{/if}
|
|
|
|
account.2.outbound_proxy.1.address = {$account.2.outbound_proxy_primary}
|
|
account.2.outbound_proxy.2.address = {$account.2.outbound_proxy_secondary}
|
|
account.2.outbound_proxy_enable = {if isset($account.2.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.2.reregister_enable = 0
|
|
account.2.retry_counts =
|
|
account.2.failback_mode = 0
|
|
account.2.failback_timeout = 3600
|
|
account.2.naptr_build = 0
|
|
account.2.fallback.redundancy_type = 0
|
|
account.2.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.2.sip_server.1.address = {$account.2.server.1.address}
|
|
account.2.sip_server.1.port = {$account.2.sip_port}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.2.sip_server.1.expires = {$account.2.register_expires}
|
|
account.2.sip_server.1.retry_counts = 3
|
|
account.2.sip_server.1.failback_mode = 0
|
|
account.2.sip_server.1.failback_timeout = 3600
|
|
account.2.sip_server.1.register_on_enable = 0
|
|
account.2.sip_server.2.address = {$account.2.server.2.address}
|
|
account.2.sip_server.2.port = {$account.2.sip_port}
|
|
account.2.sip_server.2.expires = {$account.2.register_expires}
|
|
account.2.sip_server.2.retry_counts = 3
|
|
account.2.sip_server.2.failback_mode = 0
|
|
account.2.sip_server.2.failback_timeout = 3600
|
|
account.2.sip_server.2.register_on_enable = 0
|
|
account.2.dns_cache_type = 1
|
|
|
|
account.2.dns_cache_a.1.name =
|
|
account.2.dns_cache_a.1.ip =
|
|
account.2.dns_cache_a.1.ttl = 300
|
|
|
|
account.2.dns_cache_srv.0.name =
|
|
account.2.dns_cache_srv.0.port = 0
|
|
account.2.dns_cache_srv.0.priority = 0
|
|
account.2.dns_cache_srv.0.target =
|
|
account.2.dns_cache_srv.0.weight = 0
|
|
account.2.dns_cache_srv.0.ttl = 300
|
|
account.2.dns_cache_naptr.0.name =
|
|
account.2.dns_cache_naptr.0.flags =
|
|
account.2.dns_cache_naptr.0.order = 0
|
|
account.2.dns_cache_naptr.0.preference = 0
|
|
account.2.dns_cache_naptr.0.replace =
|
|
account.2.dns_cache_naptr.0.service =
|
|
account.2.dns_cache_naptr.0.ttl = 300
|
|
|
|
account.2.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.2.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.2.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.2.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.2.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.2.srv_ttl_timer_enable =
|
|
account.2.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.2.register_mac =
|
|
account.2.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.2.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.2.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.2.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.2.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.2.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.2.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.2.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## Account2 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.2.advanced.timer_t1 = 0.5
|
|
account.2.advanced.timer_t2 = 4
|
|
account.2.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.2 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.2.subscribe_mwi = 1
|
|
account.2.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.2.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.2.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.2.blf.blf_list_uri =
|
|
|
|
account.2.blf_list_code =
|
|
account.2.blf_list_barge_in_code =
|
|
account.2.blf.subscribe_period = 1800
|
|
|
|
account.2.blf.subscribe_event =
|
|
account.2.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.2.shared_line) }
|
|
account.2.shared_line = {$account.2.shared_line}
|
|
{else}
|
|
account.2.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.2.bla_number =
|
|
account.2.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.2.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.2.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.2.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.2.codec.Y.rtpmap =
|
|
|
|
account.2.codec.1.enable = 1
|
|
account.2.codec.1.payload_type = PCMU
|
|
account.2.codec.1.priority = 2
|
|
account.2.codec.1.rtpmap = 0
|
|
|
|
account.2.codec.2.enable = 1
|
|
account.2.codec.2.payload_type = PCMA
|
|
account.2.codec.2.priority = 3
|
|
account.2.codec.2.rtpmap = 8
|
|
|
|
account.2.codec.3.enable = 0
|
|
account.2.codec.3.payload_type = G723_53
|
|
account.2.codec.3.priority =0
|
|
account.2.codec.3.rtpmap = 4
|
|
|
|
account.2.codec.4.enable = 0
|
|
account.2.codec.4.payload_type = G723_63
|
|
account.2.codec.4.priority = 0
|
|
account.2.codec.4.rtpmap = 4
|
|
|
|
account.2.codec.5.enable = 1
|
|
account.2.codec.5.payload_type = G729
|
|
account.2.codec.5.priority = 3
|
|
account.2.codec.5.rtpmap = 18
|
|
|
|
account.2.codec.6.enable = 1
|
|
account.2.codec.6.payload_type = G722
|
|
account.2.codec.6.priority = 1
|
|
account.2.codec.6.rtpmap = 9
|
|
|
|
account.2.codec.7.enable = 0
|
|
account.2.codec.7.payload_type = iLBC
|
|
account.2.codec.7.priority = 0
|
|
account.2.codec.7.rtpmap = 106
|
|
|
|
account.2.codec.8.enable = 0
|
|
account.2.codec.8.payload_type = G726-16
|
|
account.2.codec.8.priority = 0
|
|
account.2.codec.8.rtpmap = 103
|
|
|
|
account.2.codec.9.enable = 0
|
|
account.2.codec.9.payload_type = G726-24
|
|
account.2.codec.9.priority = 0
|
|
account.2.codec.9.rtpmap = 104
|
|
|
|
account.2.codec.10.enable = 0
|
|
account.2.codec.10.payload_type = G726-32
|
|
account.2.codec.10.priority = 0
|
|
account.2.codec.10.rtpmap = 102
|
|
|
|
account.2.codec.11.enable = 0
|
|
account.2.codec.11.payload_type = G726-40
|
|
account.2.codec.11.priority = 0
|
|
account.2.codec.11.rtpmap = 105
|
|
|
|
account.2.codec.12.enable = 0
|
|
account.2.codec.12.payload_type = GSM
|
|
account.2.codec.12.priority = 0
|
|
account.2.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.2.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.2.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.2.anonymous_call = 0
|
|
account.2.anonymous_call_oncode =
|
|
account.2.anonymous_call_offcode =
|
|
|
|
account.2.reject_anonymous_call =
|
|
account.2.anonymous_reject_oncode =
|
|
account.2.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.2.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.2.group_pickup_code =
|
|
account.2.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.2.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.2.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.2.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.2.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.2.ringtone.ring_type =
|
|
|
|
account.2.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.2.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.2.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.2.cid_source = {$yealink_cid_source}
|
|
|
|
account.2.cid_source_privacy = 1
|
|
account.2.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.2.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.2.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.2.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.2.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.2.music_on_hold_type =
|
|
|
|
account.2.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.2.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.2.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.2.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.2.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.2.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.2.dnd.enable =
|
|
account.2.dnd.on_code =
|
|
account.2.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.2.always_fwd.enable =
|
|
account.2.always_fwd.target =
|
|
account.2.always_fwd.off_code =
|
|
account.2.always_fwd.on_code =
|
|
|
|
account.2.busy_fwd.enable =
|
|
account.2.busy_fwd.target =
|
|
account.2.busy_fwd.off_code =
|
|
account.2.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.2.timeout_fwd.enable =
|
|
account.2.timeout_fwd.target =
|
|
account.2.timeout_fwd.timeout =
|
|
account.2.timeout_fwd.off_code =
|
|
account.2.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.2.hoteling.enable = 0
|
|
account.2.hoteling.user_id = 0
|
|
account.2.hoteling.password = 0
|
|
account.2.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.2.acd.enable = 0
|
|
account.2.acd.unavailable_reason_enable = 0
|
|
account.2.acd.available = 0
|
|
account.2.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.2.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.2.bw_acd_reason_code.1 =
|
|
|
|
account.2.reason_code.1 =
|
|
account.2.reason_code_name.1 = 0
|
|
account.2.bw_disp_code.1 =
|
|
account.2.bw_disp_code_name.1 =
|
|
account.2.supervisor_info_code.1 =
|
|
account.2.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.2.call_center.call_info_enable = 0
|
|
account.2.call_center.show_call_info_time = 30
|
|
account.2.call_center.disp_code_enable = 0
|
|
account.2.call_center.trace_enable = 0
|
|
account.2.call_center.emergency_enable = 0
|
|
account.2.call_center.queue_status_enable = 0
|
|
account.2.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.2.xsi.user =
|
|
account.2.xsi.password =
|
|
account.2.xsi.host =
|
|
account.2.xsi.server_type =
|
|
account.2.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## Time ##
|
|
#######################################################################################
|
|
#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
|
|
#local_time.time_zone = +8
|
|
#local_time.time_zone_name = China(Beijing)
|
|
local_time.time_zone = {$yealink_time_zone}
|
|
local_time.time_zone_name = {$yealink_time_zone_name}
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
|
|
#######################################################################################
|
|
## Account 3 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.3.password) }
|
|
account.3.enable = 1
|
|
{else}
|
|
account.3.enable = 0
|
|
{/if}
|
|
account.3.label = {$account.3.display_name}
|
|
account.3.display_name = {$account.3.display_name}
|
|
account.3.auth_name = {$account.3.auth_id}
|
|
account.3.password = {$account.3.password}
|
|
{if isset($account.3.server.1.address)}
|
|
account.3.user_name = {$account.3.user_id}@{$account.3.server_address}
|
|
{else}
|
|
account.3.user_name = {$account.3.user_id}
|
|
{/if}
|
|
account.3.sip_server_host = {$account.3.server_address}
|
|
account.3.sip_server_port = {$account.3.sip_port}
|
|
account.3.outbound_host = {$account.3.outbound_proxy}
|
|
|
|
account.3.outbound_port = {$account.3.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.3.sip_listen_port = {$yealink_sip_listen_port}{else}account.3.sip_listen_port = 5060{/if}
|
|
|
|
account.3.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.3.sip_transport == 'udp'}account.3.transport = 0{/if}
|
|
{if $account.3.sip_transport == 'tcp'}account.3.transport = 1{/if}
|
|
{if $account.3.sip_transport == 'tls'}account.3.transport = 2{/if}
|
|
{if $account.3.sip_transport == 'dns srv'}account.3.transport = 3{/if}
|
|
|
|
account.3.outbound_proxy.1.address = {$account.3.outbound_proxy_primary}
|
|
account.3.outbound_proxy.2.address = {$account.3.outbound_proxy_secondary}
|
|
account.3.outbound_proxy_enable = {if isset($account.3.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.3.reregister_enable = 0
|
|
account.3.retry_counts =
|
|
account.3.failback_mode = 0
|
|
account.3.failback_timeout = 3600
|
|
account.3.naptr_build = 0
|
|
account.3.fallback.redundancy_type = 0
|
|
account.3.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.3.sip_server.1.address = {$account.3.server.1.address}
|
|
account.3.sip_server.1.port = {$account.3.sip_port}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.3.sip_server.1.expires = {$account.3.register_expires}
|
|
account.3.sip_server.1.retry_counts = 3
|
|
account.3.sip_server.1.failback_mode = 0
|
|
account.3.sip_server.1.failback_timeout = 3600
|
|
account.3.sip_server.1.register_on_enable = 0
|
|
account.3.sip_server.2.address = {$account.3.server.2.address}
|
|
account.3.sip_server.2.port = {$account.3.sip_port}
|
|
account.3.sip_server.2.expires = {$account.3.register_expires}
|
|
account.3.sip_server.2.retry_counts = 3
|
|
account.3.sip_server.2.failback_mode = 0
|
|
account.3.sip_server.2.failback_timeout = 3600
|
|
account.3.sip_server.2.register_on_enable = 0
|
|
account.3.dns_cache_type = 1
|
|
|
|
account.3.dns_cache_a.1.name =
|
|
account.3.dns_cache_a.1.ip =
|
|
account.3.dns_cache_a.1.ttl = 300
|
|
|
|
account.3.dns_cache_srv.0.name =
|
|
account.3.dns_cache_srv.0.port = 0
|
|
account.3.dns_cache_srv.0.priority = 0
|
|
account.3.dns_cache_srv.0.target =
|
|
account.3.dns_cache_srv.0.weight = 0
|
|
account.3.dns_cache_srv.0.ttl = 300
|
|
account.3.dns_cache_naptr.0.name =
|
|
account.3.dns_cache_naptr.0.flags =
|
|
account.3.dns_cache_naptr.0.order = 0
|
|
account.3.dns_cache_naptr.0.preference = 0
|
|
account.3.dns_cache_naptr.0.replace =
|
|
account.3.dns_cache_naptr.0.service =
|
|
account.3.dns_cache_naptr.0.ttl = 300
|
|
|
|
account.3.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.3.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.3.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.3.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.3.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.3.srv_ttl_timer_enable =
|
|
account.3.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.3.register_mac =
|
|
account.3.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.3.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.3.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.3.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.3.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.3.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.3.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.3.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## Account3 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.3.advanced.timer_t1 = 0.5
|
|
account.3.advanced.timer_t2 = 4
|
|
account.3.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.3 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.3.subscribe_mwi = 1
|
|
account.3.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.3.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.3.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.3.blf.blf_list_uri =
|
|
|
|
account.3.blf_list_code =
|
|
account.3.blf_list_barge_in_code =
|
|
account.3.blf.subscribe_period = 1800
|
|
|
|
account.3.blf.subscribe_event =
|
|
account.3.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.3.shared_line) }
|
|
account.3.shared_line = {$account.3.shared_line}
|
|
{else}
|
|
account.3.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.3.bla_number =
|
|
account.3.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.3.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.3.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.3.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.3.codec.Y.rtpmap =
|
|
|
|
account.3.codec.1.enable = 1
|
|
account.3.codec.1.payload_type = PCMU
|
|
account.3.codec.1.priority = 2
|
|
account.3.codec.1.rtpmap = 0
|
|
|
|
account.3.codec.2.enable = 1
|
|
account.3.codec.2.payload_type = PCMA
|
|
account.3.codec.2.priority = 3
|
|
account.3.codec.2.rtpmap = 8
|
|
|
|
account.3.codec.3.enable = 0
|
|
account.3.codec.3.payload_type = G723_53
|
|
account.3.codec.3.priority =0
|
|
account.3.codec.3.rtpmap = 4
|
|
|
|
account.3.codec.4.enable = 0
|
|
account.3.codec.4.payload_type = G723_63
|
|
account.3.codec.4.priority = 0
|
|
account.3.codec.4.rtpmap = 4
|
|
|
|
account.3.codec.5.enable = 1
|
|
account.3.codec.5.payload_type = G729
|
|
account.3.codec.5.priority = 3
|
|
account.3.codec.5.rtpmap = 18
|
|
|
|
account.3.codec.6.enable = 1
|
|
account.3.codec.6.payload_type = G722
|
|
account.3.codec.6.priority = 1
|
|
account.3.codec.6.rtpmap = 9
|
|
|
|
account.3.codec.7.enable = 0
|
|
account.3.codec.7.payload_type = iLBC
|
|
account.3.codec.7.priority = 0
|
|
account.3.codec.7.rtpmap = 106
|
|
|
|
account.3.codec.8.enable = 0
|
|
account.3.codec.8.payload_type = G726-16
|
|
account.3.codec.8.priority = 0
|
|
account.3.codec.8.rtpmap = 103
|
|
|
|
account.3.codec.9.enable = 0
|
|
account.3.codec.9.payload_type = G726-24
|
|
account.3.codec.9.priority = 0
|
|
account.3.codec.9.rtpmap = 104
|
|
|
|
account.3.codec.10.enable = 0
|
|
account.3.codec.10.payload_type = G726-32
|
|
account.3.codec.10.priority = 0
|
|
account.3.codec.10.rtpmap = 102
|
|
|
|
account.3.codec.11.enable = 0
|
|
account.3.codec.11.payload_type = G726-40
|
|
account.3.codec.11.priority = 0
|
|
account.3.codec.11.rtpmap = 105
|
|
|
|
account.3.codec.12.enable = 0
|
|
account.3.codec.12.payload_type = GSM
|
|
account.3.codec.12.priority = 0
|
|
account.3.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.3.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.3.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.3.anonymous_call = 0
|
|
account.3.anonymous_call_oncode =
|
|
account.3.anonymous_call_offcode =
|
|
|
|
account.3.reject_anonymous_call =
|
|
account.3.anonymous_reject_oncode =
|
|
account.3.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.3.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.3.group_pickup_code =
|
|
account.3.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.3.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.3.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.3.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.3.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.3.ringtone.ring_type =
|
|
|
|
account.3.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.3.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.3.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.3.cid_source = {$yealink_cid_source}
|
|
|
|
account.3.cid_source_privacy = 1
|
|
account.3.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.3.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.3.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.3.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.3.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.3.music_on_hold_type =
|
|
|
|
account.3.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.3.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.3.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.3.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.3.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.3.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.3.dnd.enable =
|
|
account.3.dnd.on_code =
|
|
account.3.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.3.always_fwd.enable =
|
|
account.3.always_fwd.target =
|
|
account.3.always_fwd.off_code =
|
|
account.3.always_fwd.on_code =
|
|
|
|
account.3.busy_fwd.enable =
|
|
account.3.busy_fwd.target =
|
|
account.3.busy_fwd.off_code =
|
|
account.3.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.3.timeout_fwd.enable =
|
|
account.3.timeout_fwd.target =
|
|
account.3.timeout_fwd.timeout =
|
|
account.3.timeout_fwd.off_code =
|
|
account.3.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.3.hoteling.enable = 0
|
|
account.3.hoteling.user_id = 0
|
|
account.3.hoteling.password = 0
|
|
account.3.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.3.acd.enable = 0
|
|
account.3.acd.unavailable_reason_enable = 0
|
|
account.3.acd.available = 0
|
|
account.3.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.3.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.3.bw_acd_reason_code.1 =
|
|
|
|
account.3.reason_code.1 =
|
|
account.3.reason_code_name.1 = 0
|
|
account.3.bw_disp_code.1 =
|
|
account.3.bw_disp_code_name.1 =
|
|
account.3.supervisor_info_code.1 =
|
|
account.3.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.3.call_center.call_info_enable = 0
|
|
account.3.call_center.show_call_info_time = 30
|
|
account.3.call_center.disp_code_enable = 0
|
|
account.3.call_center.trace_enable = 0
|
|
account.3.call_center.emergency_enable = 0
|
|
account.3.call_center.queue_status_enable = 0
|
|
account.3.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.3.xsi.user =
|
|
account.3.xsi.password =
|
|
account.3.xsi.host =
|
|
account.3.xsi.server_type =
|
|
account.3.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
|
|
#######################################################################################
|
|
## Account 4 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.4.password) }
|
|
account.4.enable = 1
|
|
{else}
|
|
account.4.enable = 0
|
|
{/if}
|
|
account.4.label = {$account.4.display_name}
|
|
account.4.display_name = {$account.4.display_name}
|
|
account.4.auth_name = {$account.4.auth_id}
|
|
account.4.password = {$account.4.password}
|
|
{if isset($account.4.server.1.address)}
|
|
account.4.user_name = {$account.4.user_id}@{$account.4.server_address}
|
|
{else}
|
|
account.4.user_name = {$account.4.user_id}
|
|
{/if}
|
|
account.4.sip_server_host = {$account.4.server_address}
|
|
account.4.sip_server_port = {$account.4.sip_port}
|
|
account.4.outbound_host = {$account.4.outbound_proxy}
|
|
|
|
account.4.outbound_port = {$account.4.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.4.sip_listen_port = {$yealink_sip_listen_port}{else}account.4.sip_listen_port = 5060{/if}
|
|
|
|
account.4.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.4.sip_transport == 'udp'}account.4.transport = 0{/if}
|
|
{if $account.4.sip_transport == 'tcp'}account.4.transport = 1{/if}
|
|
{if $account.4.sip_transport == 'tls'}account.4.transport = 2{/if}
|
|
{if $account.4.sip_transport == 'dns srv'}account.4.transport = 3{/if}
|
|
|
|
account.4.outbound_proxy.1.address = {$account.4.outbound_proxy_primary}
|
|
account.4.outbound_proxy.2.address = {$account.4.outbound_proxy_secondary}
|
|
account.4.outbound_proxy_enable = {if isset($account.4.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.4.reregister_enable = 0
|
|
account.4.retry_counts =
|
|
account.4.failback_mode = 0
|
|
account.4.failback_timeout = 3600
|
|
account.4.naptr_build = 0
|
|
account.4.fallback.redundancy_type = 0
|
|
account.4.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.4.sip_server.1.address = {$account.4.server.1.address}
|
|
account.4.sip_server.1.port = {$account.4.sip_port}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.4.sip_server.1.expires = {$account.4.register_expires}
|
|
account.4.sip_server.1.retry_counts = 3
|
|
account.4.sip_server.1.failback_mode = 0
|
|
account.4.sip_server.1.failback_timeout = 3600
|
|
account.4.sip_server.1.register_on_enable = 0
|
|
account.4.sip_server.2.address = {$account.4.server.2.address}
|
|
account.4.sip_server.2.port = {$account.4.sip_port}
|
|
account.4.sip_server.2.expires = {$account.4.register_expires}
|
|
account.4.sip_server.2.retry_counts = 3
|
|
account.4.sip_server.2.failback_mode = 0
|
|
account.4.sip_server.2.failback_timeout = 3600
|
|
account.4.sip_server.2.register_on_enable = 0
|
|
account.4.dns_cache_type = 1
|
|
|
|
account.4.dns_cache_a.1.name =
|
|
account.4.dns_cache_a.1.ip =
|
|
account.4.dns_cache_a.1.ttl = 300
|
|
|
|
account.4.dns_cache_srv.1.name =
|
|
account.4.dns_cache_srv.1.port = 0
|
|
account.4.dns_cache_srv.1.priority = 0
|
|
account.4.dns_cache_srv.1.target =
|
|
account.4.dns_cache_srv.1.weight = 0
|
|
account.4.dns_cache_srv.1.ttl = 300
|
|
account.4.dns_cache_naptr.1.name =
|
|
account.4.dns_cache_naptr.1.flags =
|
|
account.4.dns_cache_naptr.1.order = 0
|
|
account.4.dns_cache_naptr.1.preference = 0
|
|
account.4.dns_cache_naptr.1.replace =
|
|
account.4.dns_cache_naptr.1.service =
|
|
account.4.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.4.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.4.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.4.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.4.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.4.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.4.srv_ttl_timer_enable =
|
|
account.4.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.4.register_mac =
|
|
account.4.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.4.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.4.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.4.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.4.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.4.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.4.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.4.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## Account4 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.4.advanced.timer_t1 = 0.5
|
|
account.4.advanced.timer_t2 = 4
|
|
account.4.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.4 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.4.subscribe_mwi = 1
|
|
account.4.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.4.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.4.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.4.blf.blf_list_uri =
|
|
|
|
account.4.blf_list_code =
|
|
account.4.blf_list_barge_in_code =
|
|
account.4.blf.subscribe_period = 1800
|
|
|
|
account.4.blf.subscribe_event =
|
|
account.4.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.4.shared_line) }
|
|
account.4.shared_line = {$account.4.shared_line}
|
|
{else}
|
|
account.4.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.4.bla_number =
|
|
account.4.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.4.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.4.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.4.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.4.codec.Y.rtpmap =
|
|
|
|
account.4.codec.1.enable = 1
|
|
account.4.codec.1.payload_type = PCMU
|
|
account.4.codec.1.priority = 1
|
|
account.4.codec.1.rtpmap = 0
|
|
|
|
account.4.codec.2.enable = 1
|
|
account.4.codec.2.payload_type = PCMA
|
|
account.4.codec.2.priority = 2
|
|
account.4.codec.2.rtpmap = 8
|
|
|
|
account.4.codec.3.enable = 0
|
|
account.4.codec.3.payload_type = G723_53
|
|
account.4.codec.3.priority =0
|
|
account.4.codec.3.rtpmap = 4
|
|
|
|
account.4.codec.4.enable = 0
|
|
account.4.codec.4.payload_type = G723_63
|
|
account.4.codec.4.priority = 0
|
|
account.4.codec.4.rtpmap = 4
|
|
|
|
account.4.codec.5.enable = 1
|
|
account.4.codec.5.payload_type = G729
|
|
account.4.codec.5.priority = 3
|
|
account.4.codec.5.rtpmap = 18
|
|
|
|
account.4.codec.6.enable = 1
|
|
account.4.codec.6.payload_type = G722
|
|
account.4.codec.6.priority = 4
|
|
account.4.codec.6.rtpmap = 9
|
|
|
|
account.4.codec.7.enable = 0
|
|
account.4.codec.7.payload_type = iLBC
|
|
account.4.codec.7.priority = 0
|
|
account.4.codec.7.rtpmap = 106
|
|
|
|
account.4.codec.8.enable = 0
|
|
account.4.codec.8.payload_type = G726-16
|
|
account.4.codec.8.priority = 0
|
|
account.4.codec.8.rtpmap = 103
|
|
|
|
account.4.codec.9.enable = 0
|
|
account.4.codec.9.payload_type = G726-24
|
|
account.4.codec.9.priority = 0
|
|
account.4.codec.9.rtpmap = 104
|
|
|
|
account.4.codec.10.enable = 0
|
|
account.4.codec.10.payload_type = G726-32
|
|
account.4.codec.10.priority = 0
|
|
account.4.codec.10.rtpmap = 102
|
|
|
|
account.4.codec.11.enable = 0
|
|
account.4.codec.11.payload_type = G726-40
|
|
account.4.codec.11.priority = 0
|
|
account.4.codec.11.rtpmap = 105
|
|
|
|
account.4.codec.12.enable = 0
|
|
account.4.codec.12.payload_type = GSM
|
|
account.4.codec.12.priority = 0
|
|
account.4.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.4.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.4.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.4.anonymous_call = 0
|
|
account.4.anonymous_call_oncode =
|
|
account.4.anonymous_call_offcode =
|
|
|
|
account.4.reject_anonymous_call =
|
|
account.4.anonymous_reject_oncode =
|
|
account.4.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.4.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.4.group_pickup_code =
|
|
account.4.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.4.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.4.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.4.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.4.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.4.ringtone.ring_type =
|
|
|
|
account.4.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.4.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.4.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.4.cid_source = {$yealink_cid_source}
|
|
|
|
account.4.cid_source_privacy = 1
|
|
account.4.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.4.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.4.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.4.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.4.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.4.music_on_hold_type =
|
|
|
|
account.4.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.4.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.4.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.4.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.4.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.4.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.4.dnd.enable =
|
|
account.4.dnd.on_code =
|
|
account.4.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.4.always_fwd.enable =
|
|
account.4.always_fwd.target =
|
|
account.4.always_fwd.off_code =
|
|
account.4.always_fwd.on_code =
|
|
|
|
account.4.busy_fwd.enable =
|
|
account.4.busy_fwd.target =
|
|
account.4.busy_fwd.off_code =
|
|
account.4.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.4.timeout_fwd.enable =
|
|
account.4.timeout_fwd.target =
|
|
account.4.timeout_fwd.timeout =
|
|
account.4.timeout_fwd.off_code =
|
|
account.4.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.4.hoteling.enable = 0
|
|
account.4.hoteling.user_id = 0
|
|
account.4.hoteling.password = 0
|
|
account.4.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.4.acd.enable = 0
|
|
account.4.acd.unavailable_reason_enable = 0
|
|
account.4.acd.available = 0
|
|
account.4.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.4.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.4.bw_acd_reason_code.1 =
|
|
|
|
account.4.reason_code.1 =
|
|
account.4.reason_code_name.1 = 0
|
|
account.4.bw_disp_code.1 =
|
|
account.4.bw_disp_code_name.1 =
|
|
account.4.supervisor_info_code.1 =
|
|
account.4.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.4.call_center.call_info_enable = 0
|
|
account.4.call_center.show_call_info_time = 30
|
|
account.4.call_center.disp_code_enable = 0
|
|
account.4.call_center.trace_enable = 0
|
|
account.4.call_center.emergency_enable = 0
|
|
account.4.call_center.queue_status_enable = 0
|
|
account.4.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.4.xsi.user =
|
|
account.4.xsi.password =
|
|
account.4.xsi.host =
|
|
account.4.xsi.server_type =
|
|
account.4.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
|
|
#######################################################################################
|
|
## Account 5 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.5.password) }
|
|
account.5.enable = 1
|
|
{else}
|
|
account.5.enable = 0
|
|
{/if}
|
|
account.5.label = {$account.5.display_name}
|
|
account.5.display_name = {$account.5.display_name}
|
|
account.5.auth_name = {$account.5.auth_id}
|
|
account.5.password = {$account.5.password}
|
|
{if isset($account.5.server.1.address)}
|
|
account.5.user_name = {$account.5.user_id}@{$account.5.server_address}
|
|
{else}
|
|
account.5.user_name = {$account.5.user_id}
|
|
{/if}
|
|
account.5.sip_server_host = {$account.5.server_address}
|
|
account.5.sip_server_port = {$account.5.sip_port}
|
|
account.5.outbound_host = {$account.5.outbound_proxy}
|
|
|
|
account.5.outbound_port = {$account.5.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.5.sip_listen_port = {$yealink_sip_listen_port}{else}account.5.sip_listen_port = 5060{/if}
|
|
|
|
account.5.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.5.sip_transport == 'udp'}account.5.transport = 0{/if}
|
|
{if $account.5.sip_transport == 'tcp'}account.5.transport = 1{/if}
|
|
{if $account.5.sip_transport == 'tls'}account.5.transport = 2{/if}
|
|
{if $account.5.sip_transport == 'dns srv'}account.5.transport = 3{/if}
|
|
|
|
account.5.outbound_proxy.1.address = {$account.5.outbound_proxy_primary}
|
|
account.5.outbound_proxy.2.address = {$account.5.outbound_proxy_secondary}
|
|
account.5.outbound_proxy_enable = {if isset($account.5.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.5.reregister_enable = 0
|
|
account.5.retry_counts =
|
|
account.5.failback_mode = 0
|
|
account.5.failback_timeout = 3600
|
|
account.5.naptr_build = 0
|
|
account.5.fallback.redundancy_type = 0
|
|
account.5.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.5.sip_server.1.address = {$account.5.server.1.address}
|
|
account.5.sip_server.1.port = {$account.5.sip_port}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.5.sip_server.1.expires = {$account.5.register_expires}
|
|
account.5.sip_server.1.retry_counts = 3
|
|
account.5.sip_server.1.failback_mode = 0
|
|
account.5.sip_server.1.failback_timeout = 3600
|
|
account.5.sip_server.1.register_on_enable = 0
|
|
account.5.sip_server.2.address = {$account.5.server.2.address}
|
|
account.5.sip_server.2.port = {$account.5.sip_port}
|
|
account.5.sip_server.2.expires = {$account.5.register_expires}
|
|
account.5.sip_server.2.retry_counts = 3
|
|
account.5.sip_server.2.failback_mode = 0
|
|
account.5.sip_server.2.failback_timeout = 3600
|
|
account.5.sip_server.2.register_on_enable = 0
|
|
account.5.dns_cache_type = 1
|
|
|
|
account.5.dns_cache_a.1.name =
|
|
account.5.dns_cache_a.1.ip =
|
|
account.5.dns_cache_a.1.ttl = 300
|
|
|
|
account.5.dns_cache_srv.1.name =
|
|
account.5.dns_cache_srv.1.port = 0
|
|
account.5.dns_cache_srv.1.priority = 0
|
|
account.5.dns_cache_srv.1.target =
|
|
account.5.dns_cache_srv.1.weight = 0
|
|
account.5.dns_cache_srv.1.ttl = 300
|
|
account.5.dns_cache_naptr.1.name =
|
|
account.5.dns_cache_naptr.1.flags =
|
|
account.5.dns_cache_naptr.1.order = 0
|
|
account.5.dns_cache_naptr.1.preference = 0
|
|
account.5.dns_cache_naptr.1.replace =
|
|
account.5.dns_cache_naptr.1.service =
|
|
account.5.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.5.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.5.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.5.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.5.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.5.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.5.srv_ttl_timer_enable =
|
|
account.5.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.5.register_mac =
|
|
account.5.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.5.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.5.nat.nat_traversal = {if isset($stun_server)}1{else}0{/if}
|
|
|
|
#Configure the STUN server address.
|
|
account.5.nat.stun_server = {$stun_server}
|
|
|
|
#Configure the STUN server port, the default value is 3478.
|
|
account.5.nat.stun_port = {if isset($stun_port)}{$stun_port}{else}3478{/if}
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.5.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.5.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.5.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## Account5 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.5.advanced.timer_t1 = 0.5
|
|
account.5.advanced.timer_t2 = 4
|
|
account.5.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.5 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.5.subscribe_mwi = 1
|
|
account.5.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.5.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.5.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.5.blf.blf_list_uri =
|
|
|
|
account.5.blf_list_code =
|
|
account.5.blf_list_barge_in_code =
|
|
account.5.blf.subscribe_period = 1800
|
|
|
|
account.5.blf.subscribe_event =
|
|
account.5.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.5.shared_line) }
|
|
account.5.shared_line = {$account.5.shared_line}
|
|
{else}
|
|
account.5.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.5.bla_number =
|
|
account.5.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.5.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.5.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.5.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.5.codec.Y.rtpmap =
|
|
|
|
account.5.codec.1.enable = 1
|
|
account.5.codec.1.payload_type = PCMU
|
|
account.5.codec.1.priority = 1
|
|
account.5.codec.1.rtpmap = 0
|
|
|
|
account.5.codec.2.enable = 1
|
|
account.5.codec.2.payload_type = PCMA
|
|
account.5.codec.2.priority = 2
|
|
account.5.codec.2.rtpmap = 8
|
|
|
|
account.5.codec.3.enable = 0
|
|
account.5.codec.3.payload_type = G723_53
|
|
account.5.codec.3.priority =0
|
|
account.5.codec.3.rtpmap = 4
|
|
|
|
account.5.codec.4.enable = 0
|
|
account.5.codec.4.payload_type = G723_63
|
|
account.5.codec.4.priority = 0
|
|
account.5.codec.4.rtpmap = 4
|
|
|
|
account.5.codec.5.enable = 1
|
|
account.5.codec.5.payload_type = G729
|
|
account.5.codec.5.priority = 3
|
|
account.5.codec.5.rtpmap = 18
|
|
|
|
account.5.codec.6.enable = 1
|
|
account.5.codec.6.payload_type = G722
|
|
account.5.codec.6.priority = 4
|
|
account.5.codec.6.rtpmap = 9
|
|
|
|
account.5.codec.7.enable = 0
|
|
account.5.codec.7.payload_type = iLBC
|
|
account.5.codec.7.priority = 0
|
|
account.5.codec.7.rtpmap = 106
|
|
|
|
account.5.codec.8.enable = 0
|
|
account.5.codec.8.payload_type = G726-16
|
|
account.5.codec.8.priority = 0
|
|
account.5.codec.8.rtpmap = 103
|
|
|
|
account.5.codec.9.enable = 0
|
|
account.5.codec.9.payload_type = G726-24
|
|
account.5.codec.9.priority = 0
|
|
account.5.codec.9.rtpmap = 104
|
|
|
|
account.5.codec.10.enable = 0
|
|
account.5.codec.10.payload_type = G726-32
|
|
account.5.codec.10.priority = 0
|
|
account.5.codec.10.rtpmap = 102
|
|
|
|
account.5.codec.11.enable = 0
|
|
account.5.codec.11.payload_type = G726-40
|
|
account.5.codec.11.priority = 0
|
|
account.5.codec.11.rtpmap = 105
|
|
|
|
account.5.codec.12.enable = 0
|
|
account.5.codec.12.payload_type = GSM
|
|
account.5.codec.12.priority = 0
|
|
account.5.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.5.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.5.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.5.anonymous_call = 0
|
|
account.5.anonymous_call_oncode =
|
|
account.5.anonymous_call_offcode =
|
|
|
|
account.5.reject_anonymous_call =
|
|
account.5.anonymous_reject_oncode =
|
|
account.5.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.5.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.5.group_pickup_code =
|
|
account.5.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.5.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.5.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.5.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.5.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.5.ringtone.ring_type =
|
|
|
|
account.5.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.5.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.5.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.5.cid_source = {$yealink_cid_source}
|
|
|
|
account.5.cid_source_privacy = 1
|
|
account.5.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.5.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.5.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.5.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.5.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.5.music_on_hold_type =
|
|
|
|
account.5.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.5.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.5.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.5.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.5.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.5.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.5.dnd.enable =
|
|
account.5.dnd.on_code =
|
|
account.5.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.5.always_fwd.enable =
|
|
account.5.always_fwd.target =
|
|
account.5.always_fwd.off_code =
|
|
account.5.always_fwd.on_code =
|
|
|
|
account.5.busy_fwd.enable =
|
|
account.5.busy_fwd.target =
|
|
account.5.busy_fwd.off_code =
|
|
account.5.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.5.timeout_fwd.enable =
|
|
account.5.timeout_fwd.target =
|
|
account.5.timeout_fwd.timeout =
|
|
account.5.timeout_fwd.off_code =
|
|
account.5.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.5.hoteling.enable = 0
|
|
account.5.hoteling.user_id = 0
|
|
account.5.hoteling.password = 0
|
|
account.5.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.5.acd.enable = 0
|
|
account.5.acd.unavailable_reason_enable = 0
|
|
account.5.acd.available = 0
|
|
account.5.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.5.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.5.bw_acd_reason_code.1 =
|
|
|
|
account.5.reason_code.1 =
|
|
account.5.reason_code_name.1 = 0
|
|
account.5.bw_disp_code.1 =
|
|
account.5.bw_disp_code_name.1 =
|
|
account.5.supervisor_info_code.1 =
|
|
account.5.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.5.call_center.call_info_enable = 0
|
|
account.5.call_center.show_call_info_time = 30
|
|
account.5.call_center.disp_code_enable = 0
|
|
account.5.call_center.trace_enable = 0
|
|
account.5.call_center.emergency_enable = 0
|
|
account.5.call_center.queue_status_enable = 0
|
|
account.5.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.5.xsi.user =
|
|
account.5.xsi.password =
|
|
account.5.xsi.host =
|
|
account.5.xsi.server_type =
|
|
account.5.xsi.port =
|
|
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
|
|
#######################################################################################
|
|
## Account 6 Basic Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.enable =
|
|
{if isset($account.6.password) }
|
|
account.6.enable = 1
|
|
{else}
|
|
account.6.enable = 0
|
|
{/if}
|
|
account.6.label = {$account.6.display_name}
|
|
account.6.display_name = {$account.6.display_name}
|
|
account.6.auth_name = {$account.6.auth_id}
|
|
account.6.password = {$account.6.password}
|
|
{if isset($account.6.server.1.address)}
|
|
account.6.user_name = {$account.6.user_id}@{$account.6.server_address}
|
|
{else}
|
|
account.6.user_name = {$account.6.user_id}
|
|
{/if}
|
|
account.6.sip_server_host = {$account.6.server_address}
|
|
account.6.sip_server_port = {$account.6.sip_port}
|
|
account.6.outbound_host = {$account.6.outbound_proxy}
|
|
|
|
account.6.outbound_port = {$account.6.sip_port}
|
|
{if isset($yealink_sip_listen_port)}account.6.sip_listen_port = {$yealink_sip_listen_port}{else}account.6.sip_listen_port = 5060{/if}
|
|
|
|
account.6.sip_listen_port = 5060
|
|
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
|
|
{if $account.6.sip_transport == 'udp'}account.6.transport = 0{/if}
|
|
{if $account.6.sip_transport == 'tcp'}account.6.transport = 1{/if}
|
|
{if $account.6.sip_transport == 'tls'}account.6.transport = 2{/if}
|
|
{if $account.6.sip_transport == 'dns srv'}account.6.transport = 3{/if}
|
|
|
|
account.6.outbound_proxy.1.address = {$account.6.outbound_proxy_primary}
|
|
account.6.outbound_proxy.2.address = {$account.6.outbound_proxy_secondary}
|
|
account.6.outbound_proxy_enable = {if isset($account.6.outbound_proxy_primary)}1{else}0{/if}
|
|
|
|
#######################################################################################
|
|
## Failback ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.reregister_enable = 0
|
|
|
|
account.6.reregister_enable = 0
|
|
account.6.retry_counts =
|
|
account.6.failback_mode = 0
|
|
account.6.failback_timeout = 3600
|
|
account.6.naptr_build = 0
|
|
account.6.fallback.redundancy_type = 0
|
|
account.6.fallback.timeout = {$yealink_outbound_proxy_fallback_interval}
|
|
account.6.sip_server.1.address = {$account.6.server.1.address}
|
|
account.6.sip_server.1.port = {$account.6.sip_port}
|
|
#Configure the register expiry time (in seconds), the default value is 3600.
|
|
account.6.sip_server.1.expires = {$account.6.register_expires}
|
|
account.6.sip_server.1.retry_counts = 3
|
|
account.6.sip_server.1.failback_mode = 0
|
|
account.6.sip_server.1.failback_timeout = 3600
|
|
account.6.sip_server.1.register_on_enable = 0
|
|
account.6.sip_server.2.address = {$account.6.server.2.address}
|
|
account.6.sip_server.2.port = {$account.6.sip_port}
|
|
account.6.sip_server.2.expires = {$account.6.register_expires}
|
|
account.6.sip_server.2.retry_counts = 3
|
|
account.6.sip_server.2.failback_mode = 0
|
|
account.6.sip_server.2.failback_timeout = 3600
|
|
account.6.sip_server.2.register_on_enable = 0
|
|
account.6.dns_cache_type = 1
|
|
|
|
account.6.dns_cache_a.1.name =
|
|
account.6.dns_cache_a.1.ip =
|
|
account.6.dns_cache_a.1.ttl = 300
|
|
|
|
account.6.dns_cache_srv.1.name =
|
|
account.6.dns_cache_srv.1.port = 0
|
|
account.6.dns_cache_srv.1.priority = 0
|
|
account.6.dns_cache_srv.1.target =
|
|
account.6.dns_cache_srv.1.weight = 0
|
|
account.6.dns_cache_srv.1.ttl = 300
|
|
account.6.dns_cache_naptr.1.name =
|
|
account.6.dns_cache_naptr.1.flags =
|
|
account.6.dns_cache_naptr.1.order = 0
|
|
account.6.dns_cache_naptr.1.preference = 0
|
|
account.6.dns_cache_naptr.1.replace =
|
|
account.6.dns_cache_naptr.1.service =
|
|
account.6.dns_cache_naptr.1.ttl = 300
|
|
|
|
account.6.static_cache_pri = 0
|
|
|
|
#######################################################################################
|
|
## Register Advanced ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.sip_server_type =
|
|
|
|
#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
|
|
account.6.sip_server_type =
|
|
#Enable or disable the phone to send the account log-off message first and then send account register message when rebooting the phone; 0-Disabled (default), 1-Enabled;
|
|
account.6.unregister_on_reboot =
|
|
|
|
#Enable or disable the phone to only accept the message from the server; 0-Disabled (default), 1-Enabled;
|
|
account.6.sip_trust_ctrl = 1
|
|
|
|
#Configure the timeout (in seconds) for DNS query, the value ranges from 1 to 9, the default value is 8.
|
|
account.6.dns_query_timeout=
|
|
|
|
#Enable or disable the timer to periodically refresh the DNS-SRV query result; 0-Disabled (default), 1-Enabled;
|
|
account.6.srv_ttl_timer_enable =
|
|
account.6.proxy_require =
|
|
|
|
|
|
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
|
|
account.6.register_mac =
|
|
account.6.register_line =
|
|
|
|
#Configure the interval (in seconds) the phone retries to register when account1 fails to register. It ranges from 0 to 1800, the default value is 30.
|
|
account.6.reg_fail_retry_interval =
|
|
|
|
#########################################################################
|
|
## NAT Settings ##
|
|
#########################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.nat.nat_traversal = 0
|
|
|
|
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
|
|
account.6.nat.nat_traversal = 0
|
|
|
|
account.6.nat.stun_server =
|
|
account.6.nat.stun_port = 3478
|
|
|
|
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Default (default), 2-Option, 3-Notify;
|
|
account.6.nat.udp_update_enable = 1
|
|
|
|
#Specify the keep-alive interval (in seconds), the default value is 30.
|
|
account.6.nat.udp_update_time = 30
|
|
|
|
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
|
|
account.6.nat.rport = {$yealink_rport}
|
|
|
|
|
|
#######################################################################################
|
|
## Account6 Advance Settings ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.advanced.timer_t1 = 0.5
|
|
##voice_mail.number.X =
|
|
|
|
#Configure the session timer (in seconds), the default value of T1, T2, T3 is 0.5, 4, 5.
|
|
account.6.advanced.timer_t1 = 0.5
|
|
account.6.advanced.timer_t2 = 4
|
|
account.6.advanced.timer_t4 = 5
|
|
|
|
voice_mail.number.6 = *97
|
|
|
|
|
|
#######################################################################################
|
|
## Subscribe ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.subscribe_mwi =
|
|
|
|
account.6.subscribe_mwi = 0
|
|
account.6.subscribe_mwi_expires = 3600
|
|
|
|
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
|
|
account.6.subscribe_mwi_to_vm = {$yealink_subscribe_mwi_to_vm}
|
|
|
|
account.6.subscribe_acd_expires= 3600
|
|
|
|
|
|
#######################################################################################
|
|
## BLF List ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.blf.blf_list_uri =
|
|
|
|
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
|
|
account.6.blf.blf_list_uri =
|
|
|
|
account.6.blf_list_code =
|
|
account.6.blf_list_barge_in_code =
|
|
account.6.blf.subscribe_period = 1800
|
|
|
|
account.6.blf.subscribe_event =
|
|
account.6.out_dialog_blf_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## BLA/SCA ##
|
|
#######################################################################################
|
|
## ranges from 1 to 6;
|
|
##account.X.shared_line =
|
|
|
|
#Assign account1 as shared line; 0-Disabled (default), 1-Broadsoft SCA, 2-BLA;
|
|
{if isset($account.6.shared_line) }
|
|
account.6.shared_line = {$account.6.shared_line}
|
|
{else}
|
|
account.6.shared_line = 0
|
|
{/if}
|
|
|
|
#Configure BLA number for account1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
|
|
account.6.bla_number =
|
|
account.6.bla_subscribe_period = 300
|
|
|
|
#######################################################################################
|
|
## Audio Codec ##
|
|
#######################################################################################
|
|
#Audio codecs for account1 (Y ranges from 1 to 11).
|
|
#Enable or disable the specified codec; 0-Disabled, 1-Enabled;
|
|
#account.6.codec.Y.enable =
|
|
#The type of the specified codec.
|
|
#account.6.codec.Y.payload_type =
|
|
#The priority of the specified codec. It's available when the codec is enabled.
|
|
#account.6.codec.Y.priority =
|
|
#The payload of the specified codec.
|
|
#account.6.codec.Y.rtpmap =
|
|
|
|
account.6.codec.1.enable = 1
|
|
account.6.codec.1.payload_type = PCMU
|
|
account.6.codec.1.priority = 1
|
|
account.6.codec.1.rtpmap = 0
|
|
|
|
account.6.codec.2.enable = 1
|
|
account.6.codec.2.payload_type = PCMA
|
|
account.6.codec.2.priority = 2
|
|
account.6.codec.2.rtpmap = 8
|
|
|
|
account.6.codec.3.enable = 0
|
|
account.6.codec.3.payload_type = G723_53
|
|
account.6.codec.3.priority =0
|
|
account.6.codec.3.rtpmap = 4
|
|
|
|
account.6.codec.4.enable = 0
|
|
account.6.codec.4.payload_type = G723_63
|
|
account.6.codec.4.priority = 0
|
|
account.6.codec.4.rtpmap = 4
|
|
|
|
account.6.codec.5.enable = 1
|
|
account.6.codec.5.payload_type = G729
|
|
account.6.codec.5.priority = 3
|
|
account.6.codec.5.rtpmap = 18
|
|
|
|
account.6.codec.6.enable = 1
|
|
account.6.codec.6.payload_type = G722
|
|
account.6.codec.6.priority = 4
|
|
account.6.codec.6.rtpmap = 9
|
|
|
|
account.6.codec.7.enable = 0
|
|
account.6.codec.7.payload_type = iLBC
|
|
account.6.codec.7.priority = 0
|
|
account.6.codec.7.rtpmap = 106
|
|
|
|
account.6.codec.8.enable = 0
|
|
account.6.codec.8.payload_type = G726-16
|
|
account.6.codec.8.priority = 0
|
|
account.6.codec.8.rtpmap = 103
|
|
|
|
account.6.codec.9.enable = 0
|
|
account.6.codec.9.payload_type = G726-24
|
|
account.6.codec.9.priority = 0
|
|
account.6.codec.9.rtpmap = 104
|
|
|
|
account.6.codec.10.enable = 0
|
|
account.6.codec.10.payload_type = G726-32
|
|
account.6.codec.10.priority = 0
|
|
account.6.codec.10.rtpmap = 102
|
|
|
|
account.6.codec.11.enable = 0
|
|
account.6.codec.11.payload_type = G726-40
|
|
account.6.codec.11.priority = 0
|
|
account.6.codec.11.rtpmap = 105
|
|
|
|
account.6.codec.12.enable = 0
|
|
account.6.codec.12.payload_type = GSM
|
|
account.6.codec.12.priority = 0
|
|
account.6.codec.12.rtpmap = 3
|
|
|
|
|
|
#######################################################################################
|
|
## Audio Advanced ##
|
|
#######################################################################################
|
|
#Specify whether to encrypt the SIP messages; 0-Disabled (default), 1-Forced, 2-Negotiated;
|
|
account.6.srtp_encryption =
|
|
|
|
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
|
|
account.6.ptime =
|
|
|
|
|
|
#######################################################################################
|
|
## Anonymous Call ##
|
|
#######################################################################################
|
|
account.6.anonymous_call = 0
|
|
account.6.anonymous_call_oncode =
|
|
account.6.anonymous_call_offcode =
|
|
|
|
account.6.reject_anonymous_call =
|
|
account.6.anonymous_reject_oncode =
|
|
account.6.anonymous_reject_offcode =
|
|
|
|
#######################################################################################
|
|
## Pickup Code ##
|
|
#######################################################################################
|
|
account.5.dialoginfo_callpickup = 0
|
|
|
|
#Configure the directed and group pickup codes for account 1, the settings on a per-account basis take precedence over the settings on the phone.
|
|
account.6.group_pickup_code =
|
|
account.56.direct_pickup_code =
|
|
|
|
#######################################################################################
|
|
## DTMF ##
|
|
#######################################################################################
|
|
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
|
|
account.6.dtmf.type = {$yealink_dtmf_type}
|
|
|
|
#Configure the DTMF info type when using the SIP INFO; 0-Disabled (default), 1-DTMF-Relay, 2-DTMF, 3-Telephone-Event;
|
|
account.6.dtmf.info_type =
|
|
|
|
#Configure the RFC2833 payload. It ranges from 96 to 255, the default value is 101.
|
|
account.6.dtmf.dtmf_payload =
|
|
|
|
#######################################################################################
|
|
## Alert info ##
|
|
#######################################################################################
|
|
#Enable or disable to use the Distinctive Ring Tones; 0-Disabled , 1-Enabled(default);
|
|
account.6.alert_info_url_enable =
|
|
|
|
#Assign a ringtone for account2. The system ring tones are: common (default), Ring1.wav - Ring8.wav.
|
|
#If you set the custom ring tone (Busy.wav) for the phone, the value is: account.2.ringtone.ring_type = Config:Busy.wav
|
|
#If you set the system ring tone (Ring2.wav) for the phone, the value is: account.2.ringtone.ring_type = Resource:Ring2.wav
|
|
account.6.ringtone.ring_type =
|
|
|
|
account.6.picture_info_enable = 1
|
|
|
|
#######################################################################################
|
|
## Conference ##
|
|
#######################################################################################
|
|
#Configure the conference type; 0-Local (default), 2-Network Conference;
|
|
account.6.conf_type =
|
|
|
|
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
|
|
account.6.conf_uri =
|
|
|
|
#######################################################################################
|
|
## cid source ##
|
|
#######################################################################################
|
|
#Configure the type of SIP header(s) to carry the caller ID; 0-FROM (default), 1-PAI 2-PAI-FROM, 3-PRID-PAI-FROM, 4-PAI-RPID-FROM, 5-RPID-FROM;
|
|
account.6.cid_source = {$yealink_cid_source}
|
|
|
|
account.6.cid_source_privacy = 1
|
|
account.6.cid_source_ppi = 1
|
|
|
|
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
|
|
account.6.cp_source = 2
|
|
|
|
#######################################################################################
|
|
## Session Timer ##
|
|
#######################################################################################
|
|
#Enable or disable the session timer, 0-Disabled (default), 1-Enabled;
|
|
account.6.session_timer.enable = {$yealink_session_timer}
|
|
|
|
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
|
|
account.6.session_timer.expires =
|
|
|
|
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
|
|
account.6.session_timer.refresher =
|
|
|
|
#######################################################################################
|
|
## Music on Hold ##
|
|
#######################################################################################
|
|
#Configure the type of Music on Hold; 0-Send the INVITE request to Music on Hold Server then hold the call; 1-Hold the call then send the INVITE request to Music on Hold Server;
|
|
#Require reboot;
|
|
account.6.music_on_hold_type =
|
|
|
|
account.6.music_server_uri =
|
|
|
|
#######################################################################################
|
|
## Advanced ##
|
|
#######################################################################################
|
|
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
|
|
account.6.auto_answer =
|
|
|
|
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
|
|
account.6.missed_calllog =
|
|
|
|
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
|
|
account.6.100rel_enable = {$yealink_retransmission}
|
|
|
|
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
|
|
account.6.enable_user_equal_phone =
|
|
|
|
#Enable or disable the simplified header field feature; 0-Disabled, 1-Enabled (default);
|
|
account.6.compact_header_enable =
|
|
|
|
#######################################################################################
|
|
## DND ##
|
|
#######################################################################################
|
|
account.6.dnd.enable =
|
|
account.6.dnd.on_code =
|
|
account.6.dnd.off_code =
|
|
|
|
#######################################################################################
|
|
## Call Forward ##
|
|
#######################################################################################
|
|
#Enable or disable the busy forward feature for account; 0-Disabled (default), 1-Enabled;
|
|
account.6.always_fwd.enable =
|
|
account.6.always_fwd.target =
|
|
account.6.always_fwd.off_code =
|
|
account.6.always_fwd.on_code =
|
|
|
|
account.6.busy_fwd.enable =
|
|
account.6.busy_fwd.target =
|
|
account.6.busy_fwd.off_code =
|
|
account.6.busy_fwd.on_code =
|
|
|
|
#Enable or disable the no answer forward feature for account1; 0-Disabled (default), 1-Enabled;
|
|
#Configure the waiting ring times before forwarding. It ranges from 0 to 20, the default value is 2.
|
|
account.6.timeout_fwd.enable =
|
|
account.6.timeout_fwd.target =
|
|
account.6.timeout_fwd.timeout =
|
|
account.6.timeout_fwd.off_code =
|
|
account.6.timeout_fwd.on_code =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Hoteling ##
|
|
#######################################################################################
|
|
account.6.hoteling.enable = 0
|
|
account.6.hoteling.user_id = 0
|
|
account.6.hoteling.password = 0
|
|
account.6.hoteling.auto_login_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD ##
|
|
#######################################################################################
|
|
account.6.acd.enable = 0
|
|
account.6.acd.unavailable_reason_enable = 0
|
|
account.6.acd.available = 0
|
|
account.6.acd.initial_state = 1
|
|
|
|
#######################################################################################
|
|
## Broadsoft ACD Call Center ##
|
|
#######################################################################################
|
|
#Configure the ACD reason code of Broadsoft.(The valus of Y must be consecutive numbers.)
|
|
#account.6.bw_acd_reason_code.Y = 500(lunch time)
|
|
account.6.bw_acd_reason_code.1 =
|
|
|
|
account.6.reason_code.1 =
|
|
account.6.reason_code_name.1 = 0
|
|
account.6.bw_disp_code.1 =
|
|
account.6.bw_disp_code_name.1 =
|
|
account.6.supervisor_info_code.1 =
|
|
account.6.supervisor_info_code_name.1 =
|
|
|
|
#######################################################################################
|
|
## Broadsoft Call Center ##
|
|
#######################################################################################
|
|
account.6.call_center.call_info_enable = 0
|
|
account.6.call_center.show_call_info_time = 30
|
|
account.6.call_center.disp_code_enable = 0
|
|
account.6.call_center.trace_enable = 0
|
|
account.6.call_center.emergency_enable = 0
|
|
account.6.call_center.queue_status_enable = 0
|
|
account.6.call_center.queue_status_light_enable = 0
|
|
|
|
#######################################################################################
|
|
## Broadsoft XSI ##
|
|
#######################################################################################
|
|
account.6.xsi.user =
|
|
account.6.xsi.password =
|
|
account.6.xsi.host =
|
|
account.6.xsi.server_type =
|
|
account.6.xsi.port =
|
|
|
|
#######################################################################################
|
|
## BSFT UC ##
|
|
#######################################################################################
|
|
###Only T46G/T48G/T49G Models support these parameter
|
|
features.uc_enable =
|
|
features.uc_password =
|
|
features.uc_username =
|
|
features.config_dsskey_length = {$yealink_dsskey_length}
|
|
phone_setting.dsskey_directory_auto.enable =
|
|
|
|
#######################################################################################
|
|
## NETWORK ##
|
|
#######################################################################################
|
|
|
|
#######################################################################################
|
|
## Line Key ##
|
|
#######################################################################################
|
|
|
|
#The x of the parameter "linekey.x.line" ranges from 1 to 6.
|
|
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
|
|
#linekey.x.lable--Define the label for each line key. Meet-Me Conference "1" or BLF "16" require pick_value.
|
|
|
|
{foreach $keys['line'] as $row}
|
|
#Configure Line Key {$row.device_key_id}
|
|
linekey.{$row.device_key_id}.line = {$row.device_key_line}
|
|
linekey.{$row.device_key_id}.value = {$row.device_key_value}
|
|
{if $row.device_key_type == "1" || $row.device_key_type == "16"}
|
|
linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
|
|
{else}
|
|
linekey.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
{/if}
|
|
linekey.{$row.device_key_id}.type = {$row.device_key_type}
|
|
linekey.{$row.device_key_id}.xml_phonebook =
|
|
linekey.{$row.device_key_id}.label = {$row.device_key_label}
|
|
|
|
{/foreach}
|
|
|
|
|
|
#######################################################################################
|
|
## Memory Key (For T38G only) ##
|
|
#######################################################################################
|
|
#X ranges from 1 to 10;
|
|
#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
|
|
#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line.
|
|
#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1.
|
|
#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user.
|
|
#memorykey.x.extension--Enter the pickup code, this parameter is only appilicable to BLF.
|
|
#memorykey.x.type--Assign the desired feature to the memory key.
|
|
#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS
|
|
# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL
|
|
# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser
|
|
# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group
|
|
#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
|
|
#memorykey.x.sub_type =
|
|
|
|
{foreach $keys["memory"] as $row}
|
|
#Expansion Memory Key {$row.device_key_id}
|
|
memorykey.{$row.device_key_id}.type = {$row.device_key_type}
|
|
memorykey.{$row.device_key_id}.line = {$row.device_key_line}
|
|
memorykey.{$row.device_key_id}.value = {$row.device_key_value}
|
|
memorykey.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
memorykey.{$row.device_key_id}.label = {$row.device_key_label}
|
|
memorykey.{$row.device_key_id}.xml_phonebook =
|
|
memorykey.{$row.device_key_id}.sub_type =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 1 ##
|
|
##########################################################################################
|
|
#X ranges from 1 to 16, Y ranges from 1 to 40.
|
|
#expansion_module.x.key.y.type = 37 (Switch by default)
|
|
#expansion_module.x.key.y.line = 0
|
|
#expansion_module.x.key.y.value =
|
|
#expansion_module.x.key.y.extension =
|
|
#expansion_module.x.key.y.label =
|
|
#expansion_module.X.key.Y.xml_phonebook =
|
|
|
|
{foreach $keys["expansion-1"] as $row}
|
|
expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.1.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.1.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 2 ##
|
|
##########################################################################################
|
|
|
|
{foreach $keys["expansion-2"] as $row}
|
|
expansion_module.2.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.2.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.2.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.2.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.2.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.2.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 3 ##
|
|
##########################################################################################
|
|
|
|
{foreach $keys["expansion-3"] as $row}
|
|
expansion_module.3.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.3.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.3.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.3.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.3.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.3.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 4 ##
|
|
##########################################################################################
|
|
|
|
{foreach $keys["expansion-4"] as $row}
|
|
expansion_module.4.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.4.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.4.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.4.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.4.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.4.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 5 ##
|
|
##########################################################################################
|
|
|
|
{foreach $keys["expansion-5"] as $row}
|
|
expansion_module.5.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.5.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.5.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.5.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.5.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.5.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|
|
|
|
|
|
##########################################################################################
|
|
## Expansion Module 6 ##
|
|
##########################################################################################
|
|
|
|
{foreach $keys["expansion-6"] as $row}
|
|
expansion_module.6.key.{$row.device_key_id}.type = {$row.device_key_type}
|
|
expansion_module.6.key.{$row.device_key_id}.line = {$row.device_key_line}
|
|
expansion_module.6.key.{$row.device_key_id}.value = {$row.device_key_value}
|
|
expansion_module.6.key.{$row.device_key_id}.extension = {$row.device_key_extension}
|
|
expansion_module.6.key.{$row.device_key_id}.label = {$row.device_key_label}
|
|
expansion_module.6.key.{$row.device_key_id}.xml_phonebook =
|
|
|
|
{/foreach}
|