546 lines
22 KiB
INI
546 lines
22 KiB
INI
#!version:1.0.0.1
|
|
|
|
##File header "#!version:1.0.0.1" can not be edited or deleted.##
|
|
|
|
#######################################################################################
|
|
## Network ##
|
|
#######################################################################################
|
|
#Configure the WAN port type; 0-DHCP(default), 1-PPPoE, 2-Static IP Address;
|
|
#Require reboot;
|
|
network.internet_port.type =
|
|
|
|
#Configure the static IP address, submask, gateway and DNS server.
|
|
#Require reboot;
|
|
network.internet_port.ip =
|
|
network.internet_port.mask =
|
|
network.internet_port.gateway =
|
|
network.primary_dns = {$dns_server_primary}
|
|
network.secondary_dns = {$dns_server_secondary}
|
|
|
|
#Configure the username and password for PPPOE connection.
|
|
#Require reboot;
|
|
network.pppoe.user =
|
|
network.pppoe.password =
|
|
|
|
#Enable or disable the VLAN of WAN port; 0-Disabled(default), 1-Enabled;
|
|
#Require reboot;
|
|
network.vlan.internet_port_enable = 0
|
|
|
|
#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
|
|
#Require reboot;
|
|
network.vlan.internet_port_vid =
|
|
|
|
#Configure the VLAN priority, it ranges from 0 (default) to 7.
|
|
#Require reboot;
|
|
network.vlan.internet_port_priority =
|
|
|
|
#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default);
|
|
#Require reboot;
|
|
network.vlan.dhcp_enable =
|
|
|
|
#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255.
|
|
#Multiple options separated by a comma. It supports up to 5 options in all.
|
|
#Require reboot;
|
|
network.vlan.dhcp_option =
|
|
|
|
#Configure the HTTP port (80 by default) and the HTTPS port (443 by default) of the web server. Both range from 1 to 65535.
|
|
#Require reboot;
|
|
network.port.http =
|
|
network.port.https =
|
|
|
|
#Configure the maximum local RTP port. It ranges from 0 to 65535, the default value is 12780.
|
|
#Require reboot;
|
|
network.port.max_rtpport =
|
|
|
|
#Configure the minimum local RTP port. It ranges from 0 to 65535, the default value is 11780.
|
|
#Require reboot;
|
|
network.port.min_rtpport =
|
|
|
|
#Configure the voice QOS. It ranges from 0 to 63, the default value is 40.
|
|
#Require reboot;
|
|
network.qos.rtptos =
|
|
|
|
#Configure the SIP QOS. It ranges from 0 to 63, the default value is 26.
|
|
#Require reboot;
|
|
network.qos.signaltos =
|
|
|
|
#Configure the 802.1x mode; 0-Disabled (default), 1-Enabled (EAP-MD5);
|
|
#Require reboot;
|
|
network.802_1x.mode =
|
|
|
|
#Configure the username and password for 802.1x authentication.
|
|
#Require reboot;
|
|
network.802_1x.identity =
|
|
network.802_1x.md5_password =
|
|
|
|
#Enable or disable the VPN feature; 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
network.vpn_enable =
|
|
|
|
#Enable or disable the LLDP feature; 0-Disabled, 1-Enabled (default);
|
|
#Require reboot;
|
|
network.lldp.enable =
|
|
|
|
#Configure the interval (in seconds) the phone broadcasts the LLDP request. It ranges from 1 to 3600, the default value is 60.
|
|
#Require reboot;
|
|
network.lldp.packet_interval =
|
|
|
|
#######################################################################################
|
|
## Syslog Server ##
|
|
#######################################################################################
|
|
|
|
#Configure the syslog mode; 0-Local, 1-Server,the default value is 0;
|
|
#Require reboot;
|
|
syslog.mode =
|
|
|
|
#Configure the IP address of the syslog server;
|
|
#Require reboot;
|
|
syslog.server =
|
|
|
|
#Configure the syslog level. It ranges from 0 to 6, the default value is 3.
|
|
#Require reboot;
|
|
syslog.log_level =
|
|
|
|
#######################################################################################
|
|
## Auto Provisioning ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the Plug and Play feature; 0-Disabled, 1-Enabled(default);
|
|
auto_provision.pnp_enable = 1
|
|
|
|
#Enable or disable the phone to check new configuration when powered on; 0-Disabled, 1-Enabled (default);
|
|
auto_provision.mode = 1
|
|
|
|
#Enable or disable the phone to check the new configuration repeatedly; 0-Disabled (default), 1-Enabled;
|
|
auto_provision.repeat.enable = 1
|
|
|
|
#Configure the interval (in minutes) the phone repeatedly checks the new configuration. The default is 1440.
|
|
auto_provision.repeat.minutes =
|
|
|
|
#Enable or disable the phone to check the new configuration weekly; 0-Disabled (default), 1-Enabled;
|
|
auto_provision.weekly.enalbe =
|
|
|
|
#Configure the week time the phone checks the new configuration. Applicable when the auto provisioning mode is configured as weekly or power on + weekly.
|
|
auto_provision.weekly.mask =
|
|
auto_provision.weekly.begin_time =
|
|
auto_provision.weekly.end_time =
|
|
|
|
#Configure the URL of the auto provisioning server.
|
|
auto_provision.server.url = {$yealink_provision_url}
|
|
|
|
#Configure the username and password for downloading.
|
|
auto_provision.server.username = {$http_auth_username}
|
|
auto_provision.server.password = {$http_auth_password}
|
|
|
|
#Configure the domain name of the PNP server.
|
|
auto_provision.pnp_domain_name =
|
|
|
|
#Configure the PNP vendor information.
|
|
auto_provision.pnp_event_vendor =
|
|
|
|
#Configure the name of the Common configuration file.
|
|
auto_provision.common_file_name =
|
|
|
|
#Enable or disable the DHCP option mode; 0-Disabled, 1-Enabled (default);
|
|
auto_provision.dhcp_enable =
|
|
|
|
#Configure the value (manufacturer of the device) of DHCP option 60.
|
|
auto_provision.dhcp_option.option60_value =
|
|
|
|
#Configure the custom DHCP option number. It ranges from 128 to 254.
|
|
auto_provision.dhcp_option.list_user_options =
|
|
|
|
#Configure AES key (16 characters) for decrypting the common CFG file.
|
|
auto_provision.aes_key_16.com =
|
|
|
|
#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file.
|
|
auto_provision.aes_key_16.mac =
|
|
|
|
#######################################################################################
|
|
## Phone Features ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the phone to keep sending the SIP messages to the outbound server; 0-Disabled, 1-Enabled (default);
|
|
sip.use_out_bound_in_dialog =
|
|
|
|
#Configure the registration random time (in seconds). It ranges from 0 (default) to 60.
|
|
sip.reg_surge_prevention =
|
|
|
|
#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call;
|
|
#0-Disabled, 1-Enabled (default);
|
|
transfer.semi_attend_tran_enable =
|
|
|
|
#Enable or disable the phone to complete the blind or attended transfer through on-hook;
|
|
#0-Disabled (default), 1-Enabled;
|
|
transfer.blind_tran_on_hook_enable =
|
|
transfer.on_hook_trans_enable =
|
|
|
|
#Enable or disable to access the web user interface of phone using the http/https protocol;
|
|
#0-Disabled,1-Enabled (default);
|
|
#Require Reboot;
|
|
wui.https_enable =
|
|
wui.http_enable =
|
|
|
|
#Enable or disable the feature key synchronization, 0-Disabled (default), 1-Enabled;
|
|
bw.feature_key_sync =
|
|
|
|
#######################################################################################
|
|
## Security Settings ##
|
|
#######################################################################################
|
|
|
|
#Enable or disable the phone to only accept the certificates in the Trusted Certificates list;
|
|
#0-Disabled, 1-Enabled (default);
|
|
security.trust_certificates = {if $trusted_cert_only == "false"}0{elseif $trusted_cert_only == "true"}1{/if}
|
|
|
|
#Set the password of the user or the administrator, the value format is: user:password or admin:password;
|
|
{if isset($user_name) }
|
|
security.user_name.user = {$user_name}
|
|
security.user_password = {$user_name}:{$user_password}
|
|
{/if}
|
|
{if isset($admin_name) }
|
|
security.user_name.admin = {$admin_name}
|
|
security.user_password = {$admin_name}:{$admin_password}
|
|
{/if}
|
|
{if isset($var_name) }
|
|
security.user_name.var = {$var_name}
|
|
security.user_password = {$var_name}:{$var_password}
|
|
{/if}
|
|
|
|
base.pin_code =
|
|
|
|
#######################################################################################
|
|
## Language Settings ##
|
|
#######################################################################################
|
|
|
|
#Specify the web language, the valid values are: English, Chinese_S, German, Italian and Turkish;
|
|
lang.wui =
|
|
|
|
#######################################################################################
|
|
## Time Settings ##
|
|
#######################################################################################
|
|
|
|
#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
|
|
#The default time zone name is China(Beijing).
|
|
#local_time.time_zone = +8
|
|
#local_time.time_zone_name = China(Beijing)
|
|
local_time.time_zone = {$yealink_time_zone}
|
|
local_time.time_zone_name = {$yealink_time_zone_name}
|
|
|
|
#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
|
|
local_time.ntp_server1 = {$ntp_server_primary}
|
|
local_time.ntp_server2 = {$ntp_server_secondary}
|
|
|
|
#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
|
|
local_time.interval =
|
|
|
|
#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
|
|
local_time.summer_time =
|
|
|
|
#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
|
|
local_time.dst_time_type =
|
|
|
|
#Configure the start time of DST. The default value is 1/1/0.
|
|
#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
|
|
#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
|
|
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
|
|
local_time.start_time = {$yealink_time_zone_start_time}
|
|
|
|
#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
|
|
local_time.end_time = {$yealink_time_zone_end_time}
|
|
|
|
#Configure the offset time (in seconds). It ranges from -300 to 300, the default value is blank.
|
|
local_time.offset_time = {$yealink_offset_time}
|
|
|
|
#Configure the time format; 0-12 Hour, 1-24 Hour (default);
|
|
local_time.time_format = {$yealink_time_format}
|
|
|
|
#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
|
|
local_time.date_format = {$yealink_date_format}
|
|
|
|
#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
|
|
local_time.dhcp_time = {$yealink_dhcp_time}
|
|
|
|
#Enable or disable the manual time; 0-NTP time, 1-manual time. The default value is 0.
|
|
local_time.manual_time_enable =
|
|
|
|
#######################################################################################
|
|
## Dial Plan ##
|
|
#######################################################################################
|
|
|
|
#Configure the area code.
|
|
dialplan.area_code.code =
|
|
dialplan.area_code.min_len = 1
|
|
dialplan.area_code.max_len = 15
|
|
|
|
#When applying the rule to multiple lines, each line ID separated by comma.
|
|
#e.g. dialplan.area_code.line_id = 1, 2, 3
|
|
dialplan.area_code.line_id =
|
|
|
|
#Configure the block out number. X ranges from 1 to 10.
|
|
#dialplan.block_out.number.x =
|
|
dialplan.block_out.number.1 =
|
|
|
|
#When applying the rule to multiple lines, each line ID separated by comma, e.g. 1,2,3.
|
|
#dialplan.block_out.line_id.x =
|
|
dialplan.block_out.line_id.1 =
|
|
|
|
#Configure the replace rule. X ranges from 1 to 10;
|
|
#dialplan.replace.prefix.x =
|
|
#dialplan.replace.replace.x =
|
|
#dialplan.replace.line_id.x =
|
|
|
|
dialplan.replace.prefix.1 =
|
|
dialplan.replace.replace.1 =
|
|
dialplan.replace.line_id.1 =
|
|
|
|
#######################################################################################
|
|
## Phone Settings ##
|
|
#######################################################################################
|
|
|
|
#Configure the return code when activating DND; 404-No Found, 480-Temporarily not available (default), 486-Busy here;
|
|
#features.dnd_refuse_code = 480
|
|
|
|
#Configure the return code when refusing a call. The valid values are 404, 480, 486 (default).
|
|
features.normal_refuse_code = 486
|
|
|
|
account.X.dnd.on_code =
|
|
account.X.dnd.off_code =
|
|
|
|
#Enable or disable the call waiting feature; 0-Disabled, 1-Enabled (default);
|
|
call_waiting.enable = {$yealink_call_waiting}
|
|
|
|
#Enable or disable the playing of call waiting tone; 0-Disabled, 1-Enabled (default);
|
|
call_waiting.tone =
|
|
|
|
#Enable or disable the phone to dial the IP address directly; 0-Disabled, 1-Enabled (default);
|
|
features.direct_ip_call_enable = 0
|
|
sip.trust_ctrl=1
|
|
|
|
#Enable or disable the phone to save the call history; 0-Disabled, 1-Enabled (default);
|
|
features.save_call_history =
|
|
|
|
#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
|
|
features.relog_offtime = 5
|
|
|
|
#Enable or disable the phone to deal the 180 SIP message after the 183 SIP message; 0-Disabled, 1-Enabled (default);
|
|
phone_setting.is_deal180 = 1
|
|
|
|
#Enable or disable the phone to automatically dial out the dialed digits in the pre-dial interface; 0-Disabled (default), 1-Enabled;
|
|
phone_setting.predial_autodial = 1
|
|
|
|
#######################################################################################
|
|
## Base_Upgrade ##
|
|
#######################################################################################
|
|
firmware.url = {$yealink_firmware_url}/{$yealink_firmware_w56p}
|
|
|
|
#######################################################################################
|
|
## Handset_upgrade ##
|
|
#######################################################################################
|
|
|
|
over_the_air.url = {$yealink_w56p_handset_firmware_url}
|
|
over_the_air.base_trigger = 1
|
|
over_the_air.handset_tip = 1
|
|
|
|
#######################################################################################
|
|
## Certificates ##
|
|
#######################################################################################
|
|
trusted_certificates.url =
|
|
|
|
#trusted_certificates.delete = http://localhost/all,delete all the trusted certificates;
|
|
trusted_certificates.delete =
|
|
|
|
server_certificates.url =
|
|
|
|
#server_certificates.delete = http://localhost/all, delete the server certificate;
|
|
server_certificates.delete =
|
|
|
|
#######################################################################################
|
|
## Local Contact/DST Time/Replace Rule ##
|
|
#######################################################################################
|
|
auto_dst.url =
|
|
dialplan_replace_rule.url =
|
|
blacklist.url =
|
|
handset.X.contact_list.url =
|
|
|
|
#######################################################################################
|
|
## Customized Factory Configurations ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the customized factory configurations;
|
|
custom_factory_configuration.url =
|
|
|
|
#######################################################################################
|
|
## OpenVPN ##
|
|
#######################################################################################
|
|
#Configure the access URL for downloading the open VPN tar;
|
|
openvpn.url =
|
|
|
|
|
|
#######################################################################################
|
|
## Remote Phonebook ##
|
|
#######################################################################################
|
|
|
|
#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5.
|
|
remote_phonebook.display_name =
|
|
|
|
{if isset($yealink_remote_phonebook_1_name) }
|
|
remote_phonebook.data.1.name = {$yealink_remote_phonebook_1_name}
|
|
{else}
|
|
remote_phonebook.data.1.name = Users
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_1_url) }
|
|
remote_phonebook.data.1.url = {$yealink_remote_phonebook_1_url}
|
|
{else}
|
|
remote_phonebook.data.1.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=users
|
|
{/if}
|
|
|
|
{if isset($yealink_remote_phonebook_2_name) }
|
|
remote_phonebook.data.2.name = {$yealink_remote_phonebook_2_name}
|
|
{else}
|
|
remote_phonebook.data.2.name = Groups
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_2_url) }
|
|
remote_phonebook.data.2.url = {$yealink_remote_phonebook_2_url}
|
|
{else}
|
|
remote_phonebook.data.2.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=groups
|
|
{/if}
|
|
|
|
{if isset($yealink_remote_phonebook_3_name) }
|
|
remote_phonebook.data.3.name = {$yealink_remote_phonebook_3_name}
|
|
{else}
|
|
remote_phonebook.data.3.name = Extensions
|
|
{/if}
|
|
{if isset($yealink_remote_phonebook_3_url) }
|
|
remote_phonebook.data.3.url = {$yealink_remote_phonebook_3_url}
|
|
{else}
|
|
remote_phonebook.data.3.url = http://{if isset($http_auth_username)}{$http_auth_username}:{$http_auth_password}@{/if}{$domain_name}/app/provision/?file=directory.xml&contacts=extensions
|
|
{/if}
|
|
|
|
remote_phonebook.data.4.name = {$yealink_remote_phonebook_4_name}
|
|
remote_phonebook.data.4.url = {$yealink_remote_phonebook_4_url}
|
|
|
|
remote_phonebook.data.5.name = {$yealink_remote_phonebook_5_name}
|
|
remote_phonebook.data.5.url = {$yealink_remote_phonebook_5_url}
|
|
|
|
#######################################################################################
|
|
## Network Directory ##
|
|
#######################################################################################
|
|
|
|
#Configure the interval(in minutes) for the phone to update phonebook,(1440 by default);
|
|
directory.update_time_interval =
|
|
|
|
#Enable or disable the phone to match the incoming call with the contact in the remote phonebook; 0-Disabled, 1-Enabled(default);
|
|
directory.incoming_call_match_enable =
|
|
|
|
#Enable or disable the broadsoft directory; 0-Disabled (default), 1-Enabled;
|
|
bw.directory_enable =
|
|
|
|
#Network Phonebook
|
|
xsi.host =
|
|
xsi.user =
|
|
xsi.password =
|
|
bw_phonebook.group_enable = 1
|
|
bw_phonebook.group_common_enable = 0
|
|
bw_phonebook.enterprise_enable = 0
|
|
bw_phonebook.enterprise_common_enable = 0
|
|
bw_phonebook.personal_enable = 0
|
|
bw_phonebook.update_interval = 1440
|
|
|
|
#Network Call Log
|
|
bw_phonebook.call_log_enable = 0
|
|
|
|
|
|
#######################################################################################
|
|
## Tone ##
|
|
#######################################################################################
|
|
voice.tone.country = Custom
|
|
voice.tone.dial =
|
|
voice.tone.ring =
|
|
voice.tone.busy =
|
|
voice.tone.callwaiting =
|
|
|
|
|
|
#######################################################################################
|
|
## Number Assignment ##
|
|
#######################################################################################
|
|
#The line accept to incoming(1,2,3,4,5);X ranges from 1 to 5
|
|
#handset.X.incoming_lines = 1,2,3,4
|
|
|
|
handset.1.incoming_lines =
|
|
|
|
#The line accept to call out(1,2,3,4,5)
|
|
#handset.X.dial_out_lines = 1,2,5
|
|
#handset.X.dial_out_default_line = 1
|
|
|
|
handset.1.dial_out_lines =
|
|
handset.1.dial_out_default_line =
|
|
|
|
handset.1.name =
|
|
|
|
#######################################################################################
|
|
## Auto Provisioning Code ##
|
|
#######################################################################################
|
|
|
|
#This feature allows user to trigger the auto provisioning by pressing a predefined string on the phone.
|
|
#Require reboot;
|
|
#"X" ranges from 1 to 50
|
|
|
|
#Configure the auto provisioning name.
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.X.name =
|
|
|
|
#Configure the auto provisioning code;
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.X.code =
|
|
|
|
#Configure the URL of the auto provisioning server.
|
|
#The valid value is a string, the maximum length is 256.
|
|
#autoprovision.X.url =
|
|
|
|
#Configure the username and password for downloading.
|
|
#The valid value is a string, the maximum length is 100.
|
|
#autoprovision.X.user =
|
|
#autoprovision.X.password =
|
|
|
|
#Configure AES key (16 characters) for decrypting the common CFG file and MAC-Oriented CFG file.
|
|
#autoprovision.X.com_aes =
|
|
#autoprovision.X.mac_aes =
|
|
|
|
autoprovision.1.name =
|
|
autoprovision.1.code =
|
|
autoprovision.1.url =
|
|
autoprovision.1.user =
|
|
autoprovision.1.password =
|
|
autoprovision.1.com_aes =
|
|
autoprovision.1.mac_aes =
|
|
|
|
|
|
#######################################################################################
|
|
## TR069 ##
|
|
#######################################################################################
|
|
#The TR069 feature is only applicable to some designated firmware version.
|
|
#All settings of TR069 require reboot.
|
|
#Enable or disable the TR069 feature; 0-Disabled (default), 1-Enabled;
|
|
|
|
managementserver.enable =
|
|
managementserver.username =
|
|
managementserver.password =
|
|
managementserver.url =
|
|
managementserver.periodic_inform_enable =
|
|
managementserver.periodic_inform_interval =
|
|
managementserver.connection_request_username =
|
|
managementserver.connection_request_password =
|
|
|
|
|
|
#######################################################################################
|
|
## SNMP ##
|
|
#######################################################################################
|
|
#Enable or disable the SNMP feature; 0-Disabled (default), 1-Enabled;
|
|
#Require reboot;
|
|
network.snmp.enable =
|
|
network.snmp.port =
|
|
|
|
#Configure the IP address(es) of the trusted SNMP server,multiple IP addresses must be separated by a space.
|
|
#Require reboot;
|
|
network.snmp.trust_ip =
|
|
|