dbxe
/
fusionpbx
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fusionpbx/resources/templates/provision/yealink/vp530/{$mac}.cfg

1506 lines
58 KiB
INI
Raw Normal View History

Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
#!version:1.0.0.1 REV70
##File header "#!version:1.0.0.1" can not be edited or deleted.##
#######################################################################################
## Account1 Settings ##
#######################################################################################
#Enable or disable the account 1; 0-Disabled (default), 1-Enabled;
account.1.enable = 1
#Configure the label displayed on the LCD screen for account 1.
account.1.label = {$display_name_1}
#Configure the display name of account 1.
account.1.display_name = {$display_name_1}
#Configure the username and password for register authentication.
Update yealink auth_name
2014-01-05 11:16:40 +01:00
account.1.auth_name = {$auth_id_1}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
account.1.password = {$user_password_1}
#Configure the register user name.
account.1.user_name = {$user_id_1}
#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
account.1.sip_trust_ctrl = 1
#Configure the SIP server address.
account.1.sip_server_host = {$server_address_1}
#Specify the port for the SIP server. The default value is 5060.
account.1.sip_server_port = {$sip_port_1}
#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
account.1.outbound_proxy_enable =
#Specify the IP address or domain name of the outbound proxy server.
account.1.outbound_host = {$outbound_proxy_1}
#Specify the server port, the default value is 5060.
account.1.outbound_port =
#Specify the IP address or domain name of the backup SIP server.
#Require reboot;
account.1.backup_sip_server_host =
#Specify the backup SIP server port, the default value is 5060.
#Require reboot;
account.1.backup_sip_server_port =
account.1.sip_server_host_readonly =
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if}
{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if}
Fix TLS option for the sip transport.
2014-01-09 03:35:29 +01:00
{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if}
#Configure the address of the backup outbound proxy server.
account.1.backup_outbound_host =
#Specify the port of the backup outbound proxy server, the default value is 5060.
account.1.backup_outbound_port =
#Configure the voice mail number of account 1.
voice_mail.number.1 = *97
#Configure the proxy server to account 1.
account.1.proxy_require =
#Configure the call mode; 0-Voice, 1-Video (default);
account.1.call_option.call_mode =
#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default);
account.1.call_option.local_video_enable =
#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled;
account.1.anonymous_call =
#Configure the on code and off code of the anonymous call feature.
account.1.anonymous_call_oncode =
account.1.anonymous_call_offcode =
#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled;
account.1.reject_anonymous_call =
#Configure the on code and off code of the reject anonymous call feature.
account.1.anonymous_reject_oncode =
account.1.anonymous_reject_offcode =
#Configure the SIP port for account 1, the default value is 5060.
account.1.sip_listen_port =
#Configure the register expiry time (in seconds), the default value is 3600.
account.1.expires = {$register_expires_1}
#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default);
account.1.100rel_enable =
#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled;
account.1.precondition =
#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
account.1.subscribe_register =
#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.1.subscribe_mwi =
#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600.
account.1.subscribe_mwi_expires =
#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI;
account.1.cid_source =
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
account.1.cp_source =
#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
account.1.session_timer.enable =
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
account.1.session_timer.expires =
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
account.1.session_timer.refresher =
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
account.1.enable_user_equal_phone =
#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated;
account.1.srtp_encryption =
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.1.ptime =
#Assign account 1 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance;
account.1.shared_line =
#Configure BLA number for account 1 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
account.1.bla_number =
account.1.bla_subscribe_period =
#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled;
account.1.dialoginfo_callpickup =
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
account.1.auto_answer =
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
account.1.missed_calllog =
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.1.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address and line number in the Register message; 0-Disabled (default), 1-Enabled;
account.1.register_mac =
#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default);
account.1.register_line =
#Configure the interval (in seconds) the phone retries to register when account 1 fails to register. It ranges from 0 to 1800, the default value is 30.
account.1.reg_fail_retry_interval =
#Configure the conference type; 0-Local (default), 2-Network Conference;
account.1.conf_type =
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
account.1.conf_uri =
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
account.1.blf.blf_list_uri =
#Configure the BLF subscribe period (in seconds), the default value is 1800.
account.1.blf.subscribe_period =
#Configure the pickup code of BLF List.
account.1.blf_list_code =
#Configure the bargein code.
account.1.blf_list_barge_in_code =
#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft;
account.1.sip_server_type =
#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4);
account.1.enable_signal_encode =
#Configure the key for encoding.
account.1.signal_encode_key =
#Configure the music on hold server;
account.1.music_server_uri =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
account.1.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101.
account.1.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event;
account.1.dtmf.info_type =
#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled;
account.1.compact_header_enable =
#Enable or disable the ACD feature on account 1; 0-Disabled (default), 1-Enable;
account.1.acd.enable =
#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable;
account.1.acd.available =
#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default);
account.1.acd.initial_state =
#Configure the user ID and password to login the ACD system.
account.1.acd.user_id =
account.1.acd.password =
#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default);
account.1.acd.auto_login_enable =
#Configure the unavailable reason and unavailable reason code.
account.1.acd.unavailable_reason =
account.1.acd.reason_code.code =
#Enable or disable the hoteling feature on account 1; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.1.hoteling.enable =
#Configure the hoteling user ID and password.
#Require reboot;
account.1.hoteling.user_id =
account.1.hoteling.password =
#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.1.hoteling.auto_login_enable =
#########################################################################
## NAT Settings ##
#########################################################################
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.1.nat.nat_traversal =
#Configure the STUN server address.
account.1.nat.stun_server =
#Configure the STUN server port, the default value is 3478.
account.1.nat.stun_port =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.1.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.
account.1.nat.udp_update_time =
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
account.1.nat.rport =
#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
account.1.advanced.timer_t1 =
account.1.advanced.timer_t2 =
account.1.advanced.timer_t4 =
#Configure the audio and video attributes.
account.1.advanced.audio_bandwidth = 0
account.1.advanced.video_frame_rate = 25
account.1.advanced.video_i_frame_refresh_time = 30
account.1.advanced.video_bandwidth = 0
account.1.advanced.total_bandwidth = 0
#Assign a ringtone for account 1. The system ring tones are: common (default), Ring1.wav, Ring2.wav,<2C><><EFBFBD><EFBFBD>Ring8.wav.
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav
account.1.ringtone.ring_type =
#Audio codecs for account 1 (Y ranges from 1 to 7).
#account.1.codec.y.enable =
#account.1.codec.y.payload_type =
#account.1.codec.y.priority =
#account.1.codec.y.rtpmap =
account.1.codec.1.enable = 1
account.1.codec.1.payload_type = PCMU
account.1.codec.1.priority = 2
account.1.codec.1.rtpmap = 8
account.1.codec.2.enable = 1
account.1.codec.2.payload_type = PCMA
account.1.codec.2.priority = 1
account.1.codec.2.rtpmap = 0
account.1.codec.3.enable = 1
account.1.codec.3.payload_type = G729
account.1.codec.3.priority =3
account.1.codec.3.rtpmap = 18
account.1.codec.4.enable = 1
account.1.codec.4.payload_type = G722
account.1.codec.4.priority = 4
account.1.codec.4.rtpmap = 9
account.1.codec.5.enable = 0
account.1.codec.5.payload_type = G723
account.1.codec.5.priority = 5
account.1.codec.5.rtpmap = 4
account.1.codec.6.enable = 0
account.1.codec.6.payload_type = AACLC
account.1.codec.6.priority = 6
account.1.codec.6.rtpmap = 102
account.1.codec.7.enable = 0
account.1.codec.7.payload_type = iLBC
account.1.codec.7.priority = 7
account.1.codec.7.rtpmap = 122
#Video codecs for account 1 (X ranges from 1 to 3)
#account.1.video_codec.xxxxx.enable =
#account.1.video_codec.x.priority =
#account.1.video_codec.x.payload_type =
#account.1.video_codec.x.rtpmap =
#account.1.video_codec.x.para =
account.1.video_codec.1.enable = 1
account.1.video_codec.1.priority = 1
account.1.video_codec.1.payload_type = H264
account.1.video_codec.1.rtpmap = 99
account.1.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880
account.1.video_codec.2.enable = 1
account.1.video_codec.2.priority = 2
account.1.video_codec.2.payload_type = H263
account.1.video_codec.2.rtpmap = 34
account.1.video_codec.2.para = CIF=1; QCIF=1
account.1.video_codec.3.enable = 1
account.1.video_codec.3.priority = 3
account.1.video_codec.3.payload_type = mp4v-es
account.1.video_codec.3.rtpmap = 102
account.1.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840
#######################################################################################
## Account2 Settings ##
#######################################################################################
#Enable or disable the account 2; 0-Disabled (default), 1-Enabled;
account.2.enable = 1
#Configure the label displayed on the LCD screen for account 2.
account.2.label = {$display_name_2}
#Configure the display name of account 2.
account.2.display_name = {$display_name_2}
#Configure the username and password for register authentication.
Update yealink auth_name
2014-01-05 11:16:40 +01:00
account.2.auth_name = {$auth_id_2}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
account.2.password = {$user_password_2}
#Configure the register user name.
account.2.user_name = {$user_id_2}
#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
account.2.sip_trust_ctrl =
#Configure the SIP server address.
account.2.sip_server_host = {$server_address_2}
#Specify the port for the SIP server. The default value is 5060.
account.2.sip_server_port = {$sip_port_2}
#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
account.2.outbound_proxy_enable =
#Specify the IP address or domain name of the outbound proxy server.
account.2.outbound_host =
#Specify the server port, the default value is 5060.
account.2.outbound_port =
#Specify the IP address or domain name of the backup SIP server.
#Require reboot;
account.2.backup_sip_server_host =
#Specify the backup SIP server port, the default value is 5060.
#Require reboot;
account.2.backup_sip_server_port =
account.2.sip_server_host_readonly =
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_2 == 'udp'}account.2.transport = 0{/if}
{if $sip_transport_2 == 'tcp'}account.2.transport = 1{/if}
Fix TLS option for the sip transport.
2014-01-09 03:35:29 +01:00
{if $sip_transport_2 == 'tls'}account.2.transport = 2{/if}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
{if $sip_transport_2 == 'dns srv'}account.2.transport = 3{/if}
#Configure the address of the backup outbound proxy server.
account.2.backup_outbound_host =
#Specify the port of the backup outbound proxy server, the default value is 5060.
account.2.backup_outbound_port =
#Configure the voice mail number of account 2.
voice_mail.number.2 = *97
#Configure the proxy server to account 2.
account.2.proxy_require =
#Configure the call mode; 0-Voice, 1-Video (default);
account.2.call_option.call_mode =
#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default);
account.2.call_option.local_video_enable =
#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled;
account.2.anonymous_call =
#Configure the on code and off code of the anonymous call feature.
account.2.anonymous_call_oncode =
account.2.anonymous_call_offcode =
#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled;
account.2.reject_anonymous_call =
#Configure the on code and off code of the reject anonymous call feature.
account.2.anonymous_reject_oncode =
account.2.anonymous_reject_offcode =
#Configure the SIP port for account 2, the default value is 5060.
account.2.sip_listen_port =
#Configure the register expiry time (in seconds), the default value is 3600.
account.2.expires = {$register_expires_2}
#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default);
account.2.100rel_enable =
#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled;
account.2.precondition =
#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
account.2.subscribe_register =
#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.2.subscribe_mwi =
#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600.
account.2.subscribe_mwi_expires =
#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI;
account.2.cid_source =
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
account.2.cp_source =
#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
account.2.session_timer.enable =
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
account.2.session_timer.expires =
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
account.2.session_timer.refresher =
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
account.2.enable_user_equal_phone =
#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated;
account.2.srtp_encryption =
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.2.ptime =
#Assign account 2 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance;
account.2.shared_line =
#Configure BLA number for account 2 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
account.2.bla_number =
account.2.bla_subscribe_period =
#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled;
account.2.dialoginfo_callpickup =
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
account.2.auto_answer =
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
account.2.missed_calllog =
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.2.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
account.2.register_mac =
#Enable or disable the phone to send the line number in the Register message; 0-Disabled, 1-Enabled (default);
account.2.register_line =
#Configure the interval (in seconds) the phone retries to register when account 2 fails to register. It ranges from 0 to 1800, the default value is 30.
account.2.reg_fail_retry_interval =
#Configure the conference type; 0-Local (default), 2-Network Conference;
account.2.conf_type =
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
account.2.conf_uri =
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
account.2.blf.blf_list_uri =
#Configure the BLF subscribe period (in seconds), the default value is 1800.
account.2.blf.subscribe_period =
#Configure the pickup code of BLF List.
account.2.blf_list_code =
#Configure the bargein code.
account.2.blf_list_barge_in_code =
#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft;
account.2.sip_server_type =
#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4);
account.2.enable_signal_encode =
#Configure the key for encoding.
account.2.signal_encode_key =
#Configure the music on hold server;
account.2.music_server_uri =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
account.2.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101.
account.2.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event;
account.2.dtmf.info_type =
#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled;
account.2.compact_header_enable =
#Enable or disable the ACD feature on account 2; 0-Disabled (default), 1-Enable;
account.2.acd.enable =
#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable;
account.2.acd.available =
#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default);
account.2.acd.initial_state =
#Configure the user ID and password to login the ACD system.
account.2.acd.user_id =
account.2.acd.password =
#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default);
account.2.acd.auto_login_enable =
#Configure the unavailable reason and unavailable reason code.
account.2.acd.unavailable_reason =
account.2.acd.reason_code.code =
#Enable or disable the hoteling feature on account 2; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.2.hoteling.enable =
#Configure the hoteling user ID and password.
#Require reboot;
account.2.hoteling.user_id =
account.2.hoteling.password =
#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.2.hoteling.auto_login_enable =
#########################################################################
## NAT Settings ##
#########################################################################
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.2.nat.nat_traversal =
#Configure the STUN server address.
account.2.nat.stun_server =
#Configure the STUN server port, the default value is 3478.
account.2.nat.stun_port =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.2.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.
account.2.nat.udp_update_time =
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
account.2.nat.rport =
#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
account.2.advanced.timer_t1 =
account.2.advanced.timer_t2 =
account.2.advanced.timer_t4 =
#Configure the audio and video attributes.
account.2.advanced.audio_bandwidth = 0
account.2.advanced.video_frame_rate = 25
account.2.advanced.video_i_frame_refresh_time = 30
account.2.advanced.video_bandwidth = 0
account.2.advanced.total_bandwidth = 0
#Assign a ringtone for account 2. The system ring tones are: common (default), Ring1.wav, Ring2.wav,<2C><><EFBFBD><EFBFBD>Ring8.wav.
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav
account.2.ringtone.ring_type =
#Audio codecs for account 2 (Y ranges from 1 to 7).
#account.2.codec.y.enable =
#account.2.codec.y.payload_type =
#account.2.codec.y.priority =
#account.2.codec.y.rtpmap =
account.2.codec.1.enable = 1
account.2.codec.1.payload_type = PCMU
account.2.codec.1.priority = 2
account.2.codec.1.rtpmap = 8
account.2.codec.2.enable = 1
account.2.codec.2.payload_type = PCMA
account.2.codec.2.priority = 1
account.2.codec.2.rtpmap = 0
account.2.codec.3.enable = 1
account.2.codec.3.payload_type = G729
account.2.codec.3.priority =3
account.2.codec.3.rtpmap = 18
account.2.codec.4.enable = 1
account.2.codec.4.payload_type = G722
account.2.codec.4.priority = 4
account.2.codec.4.rtpmap = 9
account.2.codec.5.enable = 0
account.2.codec.5.payload_type = G723
account.2.codec.5.priority = 5
account.2.codec.5.rtpmap = 4
account.2.codec.6.enable = 0
account.2.codec.6.payload_type = AACLC
account.2.codec.6.priority = 6
account.2.codec.6.rtpmap = 102
account.2.codec.7.enable = 0
account.2.codec.7.payload_type = iLBC
account.2.codec.7.priority = 7
account.2.codec.7.rtpmap = 122
#Video codecs for account 2 (X ranges from 1 to 3)
#account.2.video_codec.xxxxx.enable =
#account.2.video_codec.x.priority =
#account.2.video_codec.x.payload_type =
#account.2.video_codec.x.rtpmap =
#account.2.video_codec.x.para =
account.2.video_codec.1.enable = 1
account.2.video_codec.1.priority = 1
account.2.video_codec.1.payload_type = H264
account.2.video_codec.1.rtpmap = 99
account.2.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880
account.2.video_codec.2.enable = 1
account.2.video_codec.2.priority = 2
account.2.video_codec.2.payload_type = H263
account.2.video_codec.2.rtpmap = 34
account.2.video_codec.2.para = CIF=1; QCIF=1
account.2.video_codec.3.enable = 1
account.2.video_codec.3.priority = 3
account.2.video_codec.3.payload_type = mp4v-es
account.2.video_codec.3.rtpmap = 102
account.2.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840
#######################################################################################
## Account3 Settings ##
#######################################################################################
#Enable or disable the account 3; 0-Disabled (default), 1-Enabled;
account.3.enable =
#Configure the label displayed on the LCD screen for account 3.
account.3.label = {$display_name_3}
#Configure the display name of account 3.
account.3.display_name = {$display_name_3}
#Configure the username and password for register authentication.
Update yealink auth_name
2014-01-05 11:16:40 +01:00
account.3.auth_name = {$auth_id_3}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
account.3.password = {$user_password_3}
#Configure the register user name.
account.3.user_name = {$user_id_3}
#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
account.3.sip_trust_ctrl = 1
#Configure the SIP server address.
account.3.sip_server_host = {$server_address_3}
#Specify the port for the SIP server. The default value is 5060.
account.3.sip_server_port = {$sip_port_3}
#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
account.3.outbound_proxy_enable =
#Specify the IP address or domain name of the outbound proxy server.
account.3.outbound_host = {$outbound_proxy_3}
#Specify the server port, the default value is 5060.
account.3.outbound_port =
#Specify the IP address or domain name of the backup SIP server.
#Require reboot;
account.3.backup_sip_server_host =
#Specify the backup SIP server port, the default value is 5060.
#Require reboot;
account.3.backup_sip_server_port =
account.3.sip_server_host_readonly =
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_3 == 'udp'}account.3.transport = 0{/if}
{if $sip_transport_3 == 'tcp'}account.3.transport = 1{/if}
Fix TLS option for the sip transport.
2014-01-09 03:35:29 +01:00
{if $sip_transport_3 == 'tls'}account.3.transport = 2{/if}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
{if $sip_transport_3 == 'dns srv'}account.3.transport = 3{/if}
#Configure the address of the backup outbound proxy server.
account.3.backup_outbound_host =
#Specify the port of the backup outbound proxy server, the default value is 5060.
account.3.backup_outbound_port =
#Configure the voice mail number of account 3.
voice_mail.number.3 =
#Configure the proxy server to account 3.
account.3.proxy_require =
#Configure the call mode; 0-Voice, 1-Video (default);
account.3.call_option.call_mode =
#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default);
account.3.call_option.local_video_enable =
#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled;
account.3.anonymous_call =
#Configure the on code and off code of the anonymous call feature.
account.3.anonymous_call_oncode =
account.3.anonymous_call_offcode =
#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled;
account.3.reject_anonymous_call =
#Configure the on code and off code of the reject anonymous call feature.
account.3.anonymous_reject_oncode =
account.3.anonymous_reject_offcode =
#Configure the SIP port for account 3, the default value is 5060.
account.3.sip_listen_port =
#Configure the register expiry time (in seconds), the default value is 3600.
account.3.expires = {$register_expires_3}
#Enable or disable the 100 reliable retransmission; 0-Disabled, 1-Enabled (default);
account.3.100rel_enable =
#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled;
account.3.precondition =
#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
account.3.subscribe_register =
#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.3.subscribe_mwi =
#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600.
account.3.subscribe_mwi_expires =
#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI;
account.3.cid_source =
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
account.3.cp_source =
#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
account.3.session_timer.enable =
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
account.3.session_timer.expires =
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
account.3.session_timer.refresher =
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
account.3.enable_user_equal_phone =
#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated;
account.3.srtp_encryption =
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.3.ptime =
#Assign account 3 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance;
account.3.shared_line =
#Configure BLA number for account 3 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
account.3.bla_number =
account.3.bla_subscribe_period =
#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled;
account.3.dialoginfo_callpickup =
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
account.3.auto_answer =
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
account.3.missed_calllog =
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.3.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
account.3.register_mac =
#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default);
account.3.register_line =
#Configure the interval (in seconds) the phone retries to register when account 3 fails to register. It ranges from 0 to 1800, the default value is 30.
account.3.reg_fail_retry_interval =
#Configure the conference type; 0-Local (default), 2-Network Conference;
account.3.conf_type =
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
account.3.conf_uri =
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
account.3.blf.blf_list_uri =
#Configure the BLF subscribe period (in seconds), the default value is 1800.
account.3.blf.subscribe_period =
#Configure the pickup code of BLF List.
account.3.blf_list_code =
#Configure the bargein code.
account.3.blf_list_barge_in_code =
#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft;
account.3.sip_server_type =
#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4);
account.3.enable_signal_encode =
#Configure the key for encoding.
account.3.signal_encode_key =
#Configure the music on hold server;
account.3.music_server_uri =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
account.3.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101.
account.3.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event;
account.3.dtmf.info_type =
#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled;
account.3.compact_header_enable =
#Enable or disable the ACD feature on account 3; 0-Disabled (default), 1-Enable;
account.3.acd.enable =
#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable;
account.3.acd.available =
#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default);
account.3.acd.initial_state =
#Configure the user ID and password to login the ACD system.
account.3.acd.user_id =
account.3.acd.password =
#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default);
account.3.acd.auto_login_enable =
#Configure the unavailable reason and unavailable reason code.
account.3.acd.unavailable_reason =
account.3.acd.reason_code.code =
#Enable or disable the hoteling feature on account 3; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.3.hoteling.enable =
#Configure the hoteling user ID and password.
#Require reboot;
account.3.hoteling.user_id =
account.3.hoteling.password =
#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.3.hoteling.auto_login_enable =
#########################################################################
## NAT Settings ##
#########################################################################
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.3.nat.nat_traversal =
#Configure the STUN server address.
account.3.nat.stun_server =
#Configure the STUN server port, the default value is 3478.
account.3.nat.stun_port =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.3.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.
account.3.nat.udp_update_time =
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
account.3.nat.rport =
#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
account.3.advanced.timer_t1 =
account.3.advanced.timer_t2 =
account.3.advanced.timer_t4 =
#Configure the audio and video attributes.
account.3.advanced.audio_bandwidth = 0
account.3.advanced.video_frame_rate = 25
account.3.advanced.video_i_frame_refresh_time = 30
account.3.advanced.video_bandwidth = 0
account.3.advanced.total_bandwidth = 0
#Assign a ringtone for account 3. The system ring tones are: common (default), Ring1.wav, Ring2.wav,<2C><><EFBFBD><EFBFBD>Ring8.wav.
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav
account.3.ringtone.ring_type =
#Audio codecs for account 3 (Y ranges from 1 to 7).
#account.3.codec.y.enable =
#account.3.codec.y.payload_type =
#account.3.codec.y.priority =
#account.3.codec.y.rtpmap =
account.3.codec.1.enable = 1
account.3.codec.1.payload_type = PCMU
account.3.codec.1.priority = 2
account.3.codec.1.rtpmap = 8
account.3.codec.2.enable = 1
account.3.codec.2.payload_type = PCMA
account.3.codec.2.priority = 1
account.3.codec.2.rtpmap = 0
account.3.codec.3.enable = 1
account.3.codec.3.payload_type = G729
account.3.codec.3.priority =3
account.3.codec.3.rtpmap = 18
account.3.codec.4.enable = 1
account.3.codec.4.payload_type = G722
account.3.codec.4.priority = 4
account.3.codec.4.rtpmap = 9
account.3.codec.5.enable = 0
account.3.codec.5.payload_type = G723
account.3.codec.5.priority = 5
account.3.codec.5.rtpmap = 4
account.3.codec.6.enable = 0
account.3.codec.6.payload_type = AACLC
account.3.codec.6.priority = 6
account.3.codec.6.rtpmap = 102
account.3.codec.7.enable = 0
account.3.codec.7.payload_type = iLBC
account.3.codec.7.priority = 7
account.3.codec.7.rtpmap = 122
#Video codecs for account 3 (X ranges from 1 to 3)
#account.3.video_codec.xxxxx.enable =
#account.3.video_codec.x.priority =
#account.3.video_codec.x.payload_type =
#account.3.video_codec.x.rtpmap =
#account.3.video_codec.x.para =
account.3.video_codec.1.enable = 1
account.3.video_codec.1.priority = 1
account.3.video_codec.1.payload_type = H264
account.3.video_codec.1.rtpmap = 99
account.3.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880
account.3.video_codec.2.enable = 1
account.3.video_codec.2.priority = 2
account.3.video_codec.2.payload_type = H263
account.3.video_codec.2.rtpmap = 34
account.3.video_codec.2.para = CIF=1; QCIF=1
account.3.video_codec.3.enable = 1
account.3.video_codec.3.priority = 3
account.3.video_codec.3.payload_type = mp4v-es
account.3.video_codec.3.rtpmap = 102
account.3.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840
#######################################################################################
## Account4 Settings ##
#######################################################################################
#Enable or disable the account 4; 0-Disabled (default), 1-Enabled;
account.4.enable =
#Configure the label displayed on the LCD screen for account 4.
account.4.label = {$display_name_4}
#Configure the display name of account 4.
account.4.display_name = {$display_name_4}
#Configure the username and password for register authentication.
Update yealink auth_name
2014-01-05 11:16:40 +01:00
account.4.auth_name = {$auth_id_4}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
account.4.password = {$user_password_4}
#Configure the register user name.
account.4.user_name = {$user_id_4}
#Enable or disable the phone to receive the messages from the server only; 0-Disabled (default), 1-Enabled;
account.4.sip_trust_ctrl = 1
#Configure the SIP server address.
account.4.sip_server_host = {$server_address_4}
#Specify the port for the SIP server. The default value is 5060.
account.4.sip_server_port = {$sip_port_4}
#Enable or disable the use of the outbound proxy server; 0-Disabled (default), 1-Enabled;
account.4.outbound_proxy_enable =
#Specify the IP address or domain name of the outbound proxy server.
account.4.outbound_host = {$outbound_proxy_4}
#Specify the server port, the default value is 5060.
account.4.outbound_port =
#Specify the IP address or domain name of the backup SIP server.
#Require reboot;
account.4.backup_sip_server_host =
#Specify the backup SIP server port, the default value is 5060.
#Require reboot;
account.4.backup_sip_server_port =
account.4.sip_server_host_readonly =
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_4== 'udp'}account.4.transport = 0{/if}
{if $sip_transport_4 == 'tcp'}account.4.transport = 1{/if}
Fix TLS option for the sip transport.
2014-01-09 03:35:29 +01:00
{if $sip_transport_4 == 'tls'}account.4.transport = 2{/if}
Update the Yealink t20, and t22 provisioning files and add the t32g, t38g, and vp530.
2013-12-22 08:07:33 +01:00
{if $sip_transport_4 == 'dns srv'}account.4.transport = 3{/if}
#Configure the address of the backup outbound proxy server.
account.4.backup_outbound_host =
#Specify the port of the backup outbound proxy server, the default value is 5060.
account.4.backup_outbound_port =
#Configure the voice mail number of account 4.
voice_mail.number.4 =
#Configure the proxy server to account 4.
account.4.proxy_require =
#Configure the call mode; 0-Voice, 1-Video (default);
account.4.call_option.call_mode =
#Enable or disable the phone to display the local video during call; 0-Disabled, 1-Enabled (default);
account.4.call_option.local_video_enable =
#Enable or disable the anonymous call feature; 0-Disabled (default), 1-Enabled;
account.4.anonymous_call =
#Configure the on code and off code of the anonymous call feature.
account.4.anonymous_call_oncode =
account.4.anonymous_call_offcode =
#Enable or disable the reject anonymous call feature; 0-Disabled (default), 1-Enabled;
account.4.reject_anonymous_call =
#Configure the on code and off code of the reject anonymous call feature.
account.4.anonymous_reject_oncode =
account.4.anonymous_reject_offcode =
#Configure the SIP port for account 4, the default value is 5060.
account.4.sip_listen_port =
#Configure the register expiry time (in seconds), the default value is 3600.
account.4.expires = {$register_expires_4}
#Enable or disable the 100 reliable retransmission; 0-Disabled (default), 1-Enabled;
account.4.100rel_enable =
#Enable or disable the resource reservation; 0-Disabled (default), 1-Enabled;
account.4.precondition =
#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
account.4.subscribe_register =
#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.4.subscribe_mwi =
#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600.
account.4.subscribe_mwi_expires =
#Configure the type of SIP header to carry the caller ID; 0-FROM (default), 1-PAI;
account.4.cid_source =
#Configure the presentation of the callee ID; 0-PAI-PRID, 1-DIALED DIGITS (default), 2-RFC4916;
account.4.cp_source =
#Enable or disable the session timer; 0-Disabled (default), 1-Enabled;
account.4.session_timer.enable =
#Configure the refresh session timer interval (in seconds). It ranges from 1 to 9999.
account.4.session_timer.expires =
#Configure the session timer refresher; 0-Uac (default), 1-Uas;
account.4.session_timer.refresher =
#Enable or disable the "user=phone"; 0-Disabled (default), 1-Enabled;
account.4.enable_user_equal_phone =
#Configure the way of encrypting the message; 0-Disabled (default), 1-Forced, 2-Negotiated;
account.4.srtp_encryption =
#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.4.ptime =
#Assign account 4 as shared line; 0-Disabled or Private (default), 1-BSFT shared line, 2-Draft bridge line appearance;
account.4.shared_line =
#Configure BLA number for account 4 and the subscribe period (in seconds). It ranges from 60 to 7200, the default value is 300.
account.4.bla_number =
account.4.bla_subscribe_period =
#Enable or disable call pickup using dialog-info SIP header; 0-Disabled (default), 1-Enabled;
account.4.dialoginfo_callpickup =
#Enable or disable the auto answer feature; 0-Disabled (default), 1-Enabled;
account.4.auto_answer =
#Enable or disable the phone to record the missed call; 0-Disabled, 1-Enabled (default);
account.4.missed_calllog =
#Enable or disable the phone to subscribe to the voicemail through the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.4.subscribe_mwi_to_vm =
#Enable or disable the phone to send the MAC address in the Register message; 0-Disabled (default), 1-Enabled;
account.4.register_mac =
#Enable or disable the phone to send theline number in the Register message; 0-Disabled, 1-Enabled (default);
account.4.register_line =
#Configure the interval (in seconds) the phone retries to register when account 4 fails to register. It ranges from 0 to 1800, the default value is 30.
account.4.reg_fail_retry_interval =
#Configure the conference type; 0-Local (default), 2-Network Conference;
account.4.conf_type =
#Configure the conference URI (a SIP URI, or use part of the SIP URI). For example, "conference@domain.com" or "conference".
account.4.conf_uri =
#Configure the BLF list URI (a SIP URI, or use part of the SIP URI). For example, "2300_blflist@domain.com" or "2300_blflist".
account.4.blf.blf_list_uri =
#Configure the BLF subscribe period (in seconds), the default value is 1800.
account.4.blf.subscribe_period =
#Configure the pickup code of BLF List.
account.4.blf_list_code =
#Configure the bargein code.
account.4.blf_list_barge_in_code =
#Configure the SIP server type; 0-Local SIP Server (default), 2-Broadsoft;
account.4.sip_server_type =
#Enable or disable the SIP signal encode; 0-Disabled (default), 1-Enabled (RC 4);
account.4.enable_signal_encode =
#Configure the key for encoding.
account.4.signal_encode_key =
#Configure the music on hold server;
account.4.music_server_uri =
#Configure the DTMF type; 0-INBAND, 1-RFC2833 (default), 2-SIP INFO, 3-AUTO+SIP INFO;
account.4.dtmf.type =
#Configure the RFC2833 payload. It ranges from 96 to 225, the default value is 101.
account.4.dtmf.dtmf_payload =
#Configure the DTMF info type when using the SIP INFO; 0-Disabled, 1-DTMF-Relay (default), 2-DTMF, 3-Telephone-Event;
account.4.dtmf.info_type =
#Enable or disable the phone to support the simplified SIP header; 0-Disabled (default), 1-Enabled;
account.4.compact_header_enable =
#Enable or disable the ACD feature on account 4; 0-Disabled (default), 1-Enable;
account.4.acd.enable =
#Enbale or disable the phone to use the available/unavailable key; 0-Disabled (default), 1-Enable;
account.4.acd.available =
#Configure the initial state when logging in the ACD system; 0-Unavailable, 1-Available (default);
account.4.acd.initial_state =
#Configure the user ID and password to login the ACD system.
account.4.acd.user_id =
account.4.acd.password =
#Enable or disable the phone to automatically log in the ACD system; 0-Disabled, 1-Enabled (default);
account.4.acd.auto_login_enable =
#Configure the unavailable reason and unavailable reason code.
account.4.acd.unavailable_reason =
account.4.acd.reason_code.code =
#Enable or disable the hoteling feature on account 4; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.4.hoteling.enable =
#Configure the hoteling user ID and password.
#Require reboot;
account.4.hoteling.user_id =
account.4.hoteling.password =
#Enable or disable the auto login feature of the hoteling; 0-Disabled (default), 1-Enabled;
#Require reboot;
account.4.hoteling.auto_login_enable =
#########################################################################
## NAT Settings ##
#########################################################################
#Enable or disable the NAT traversal; 0-Disabled (default), 1-STUN;
account.4.nat.nat_traversal =
#Configure the STUN server address.
account.4.nat.stun_server =
#Configure the STUN server port, the default value is 3478.
account.4.nat.stun_port =
#Enable or disable the NAT keep-alive; 0-Disabled, 1-Enabled (default);
account.4.nat.udp_update_enable =
#Specify the keep-alive interval (in seconds), the default value is 30.
account.4.nat.udp_update_time =
#Enable or disable the NAT Rport; 0-Disabled (default), 1-Enabled;
account.4.nat.rport =
#Configure the session timer (in seconds), the default values of T1, T2, T3 are 0.5, 4, 5.
account.4.advanced.timer_t1 =
account.4.advanced.timer_t2 =
account.4.advanced.timer_t4 =
#Configure the audio and video attributes.
account.4.advanced.audio_bandwidth = 0
account.4.advanced.video_frame_rate = 25
account.4.advanced.video_i_frame_refresh_time = 30
account.4.advanced.video_bandwidth = 0
account.4.advanced.total_bandwidth = 0
#Assign a ringtone for account 4. The system ring tones are: common (default), Ring1.wav, Ring2.wav,<2C><><EFBFBD><EFBFBD>Ring8.wav.
#If you configure the custom ring tone (Family.wav) for the account, the value format is: Custom:Family.wav
#If you configure the system ring tone (Ring2.wav) for the account, the value format is: Resource:Ring2.wav
account.4.ringtone.ring_type =
#Audio codecs for account 4 (Y ranges from 1 to 7).
#account.4.codec.y.enable =
#account.4.codec.y.payload_type =
#account.4.codec.y.priority =
#account.4.codec.y.rtpmap =
account.4.codec.1.enable = 1
account.4.codec.1.payload_type = PCMU
account.4.codec.1.priority = 2
account.4.codec.1.rtpmap = 8
account.4.codec.2.enable = 1
account.4.codec.2.payload_type = PCMA
account.4.codec.2.priority = 1
account.4.codec.2.rtpmap = 0
account.4.codec.3.enable = 1
account.4.codec.3.payload_type = G729
account.4.codec.3.priority =3
account.4.codec.3.rtpmap = 18
account.4.codec.4.enable = 1
account.4.codec.4.payload_type = G722
account.4.codec.4.priority = 4
account.4.codec.4.rtpmap = 9
account.4.codec.5.enable = 0
account.4.codec.5.payload_type = G723
account.4.codec.5.priority = 5
account.4.codec.5.rtpmap = 4
account.4.codec.6.enable = 0
account.4.codec.6.payload_type = AACLC
account.4.codec.6.priority = 6
account.4.codec.6.rtpmap = 102
account.4.codec.7.enable = 0
account.4.codec.7.payload_type = iLBC
account.4.codec.7.priority = 7
account.4.codec.7.rtpmap = 122
#Video codecs for account 4 (X ranges from 1 to 3)
#account.4.video_codec.xxxxx.enable =
#account.4.video_codec.x.priority =
#account.4.video_codec.x.payload_type =
#account.4.video_codec.x.rtpmap =
#account.4.video_codec.x.para =
account.4.video_codec.1.enable = 1
account.4.video_codec.1.priority = 1
account.4.video_codec.1.payload_type = H264
account.4.video_codec.1.rtpmap = 99
account.4.video_codec.1.para = profile-level-id=42800D; packetization-mode=0; max-mbps=11880
account.4.video_codec.2.enable = 1
account.4.video_codec.2.priority = 2
account.4.video_codec.2.payload_type = H263
account.4.video_codec.2.rtpmap = 34
account.4.video_codec.2.para = CIF=1; QCIF=1
account.4.video_codec.3.enable = 1
account.4.video_codec.3.priority = 3
account.4.video_codec.3.payload_type = mp4v-es
account.4.video_codec.3.rtpmap = 102
account.4.video_codec.3.para = CIF=1; QCIF=1; MaxBR=3840
#######################################################################################
## Call Forward ##
#######################################################################################
#Enable or disable the always forward, 0-Disabled(default), 1-Enabled;
forward.always.enable =
#Configure the target number that the phone will forward the call to.
forward.always.target =
#Configure the on/off code for always forward;
forward.always.on_code =
forward.always.off_code =
#Enable or disable the busy forward, 0-Disabled(default), 1-Enabled;
forward.busy.enable =
forward.busy.target =
forward.busy.on_code =
forward.busy.off_code =
#Enable or disable the no answer forward, 0-Disabled(default), 1-Enabled;
#Configure the waiting ring times before forwarding, ranges from 0 to 20 (by default);
forward.no_answer.enable =
forward.no_answer.target =
forward.no_answer.timeout =
forward.no_answer.on_code =
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
forward.no_answer.off_code =
#######################################################################################
## Line Key ##
#######################################################################################
#The x of the parameter "linekey.x.line" ranges from 1 to 6.
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
#linekey.x.lable--Define the label for each line key.
{foreach $keys as $row}
{if $row.device_key_category == "line"}
#Configure Line Key {$row.device_key_id}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
linekey.{$row.device_key_id}.line = {$row.device_key_line}
Fix a syntax problem with the Yealink vp530 provisioning template.
2014-01-29 10:21:58 +01:00
linekey.{$row.device_key_id}.value = {$row.device_key_value}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
linekey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
linekey.{$row.device_key_id}.type = {$row.device_key_type}
linekey.{$row.device_key_id}.xml_phonebook =
linekey.{$row.device_key_id}.label = {$row.device_key_label}
Add the missing {/if}
2014-01-04 06:58:22 +01:00
{/if}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
{/foreach}
#######################################################################################
## Memory Key (For T38G only) ##
#######################################################################################
#X ranges from 1 to 10;
#memorykey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
#The value 0 of the "memorykey.x.line" stands for Auto, it means the first available line.
#But, when the DSS key is configured as BLF, BLF List, Shared Line, Call Park, Pick Up, ACD or Voice Mail feature, the value 0 stands for line 1.
#memorykey.x.value--Enter the value of some features. E.g. When configuring the DSS key to be BLF, enter the number of the monitored user.
#memorykey.x.pickup_value--Enter the pickup code, this parameter is only appilicable to BLF.
#memorykey.x.type--Assign the desired feature to the memory key.
#Valid types are: 0-N/A(default for memory key) 1-Conference 2-Forward 3-Transfer 4-Hold 5-DND 6-Redial 7-Call Return 8-SMS
# 9-Call Pickup 10-Call Park 11-DTMF 12-Voicemail 13-SpeedDial 14-Intercom 15-Line(default for line key) 16-BLF 17-URL
# 18-Group Listening 19-Public Hold 20-Private 21-Shared Line 22-XML Group 23-Group Pickup 24-Paging 25-Record 27-XML Browser
# 34-Hot Desking 35-URL Record 38-LDAP 39-BLF List 40-Prefix 41-Zero-Sp-Touch 42-ACD 45-Local Group 46-Broadsoft Group
#memorykey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the DSS key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
#memorykey.x.sub_type =
{foreach $keys as $row}
{if $row.device_key_category == "memory"}
#Expansion Memory Key {$row.device_key_id}
memorykey.{$row.device_key_id}.type = {$row.device_key_type}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
memorykey.{$row.device_key_id}.line = {$row.device_key_line}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
memorykey.{$row.device_key_id}.value = {$row.device_key_value}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
memorykey.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
memorykey.{$row.device_key_id}.label = {$row.device_key_label}
memorykey.{$row.device_key_id}.xml_phonebook =
memorykey.{$row.device_key_id}.sub_type =
{/if}
{/foreach}
##########################################################################################
## Programmable Key (For T38G only) ##
##########################################################################################
#X ranges from 1 to 15.
#programablekey.x.type--Customize the programmable key type.
#The valid types are:
#0-N/A 2-Forward 5-DND 6-Redial 7-Call Return 8-SMS 9-Call Pickup 13-Spead Dial 14-Intercom
#22-XML Group 23-Group Pickup 27-XML Browser 28-History 29-Directory 30-Menu 32-New SMS 33-Status 43-Local Phonebook
#44-Broadsoft Phonebook 45-Local Group 46-Broadsoft Group 47-XML Phonebook 48-Switch Account Up 49-Switch Account Down 50-Keypad Lock
#programablekey.x.line--Configure the desired line to apply the key feature. It ranges from 0 to 6.
#The value 0 of the "proramablekey.x.line" stands for Auto, it means the first available line.
#But, when the programmable key is configured as Pick Up, the value 0 stands for line 1.
#programablekey.x.value =
#programablekey.x.xml_phonebook--Specify the desired remote phonebook/local group/BSFT phonebook for the programmable key. This parameter is only appilicable to the feature XML Group/Local Group/Broadsoft Group.
#programablekey.x.history_type =
#programablekey.x.label--This parameter is only available to the key 1 to key 4.
programablekey.1.type =
programablekey.1.line =
programablekey.1.value =
programablekey.1.xml_phonebook =
programablekey.1.history_type =
programablekey.1.label =
##########################################################################################
## Expansion Module 1 ##
##########################################################################################
#X ranges from 1 to 16, Y ranges from 1 to 40.
#expansion_module.x.key.y.type = 37 (Switch by default)
#expansion_module.x.key.y.line = 0
#expansion_module.x.key.y.value =
#expansion_module.x.key.y.pickup_value =
#expansion_module.x.key.y.label =
#expansion_module.X.key.Y.xml_phonebook =
{foreach $keys as $row}
{if $row.device_key_category == "expansion"}
#Expansion module 1 key {$row.device_key_id}
expansion_module.1.key.{$row.device_key_id}.type = {$row.device_key_type}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
expansion_module.1.key.{$row.device_key_id}.line = {$row.device_key_line}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
expansion_module.1.key.{$row.device_key_id}.value = {$row.device_key_value}
Update the yealink templates for key line and extension options.
2014-01-04 02:48:58 +01:00
expansion_module.1.key.{$row.device_key_id}.pickup_value = {$row.device_key_extension}
Add the key assignment to the yealink templates.
2014-01-01 09:54:03 +01:00
expansion_module.1.key.{$row.device_key_id}.label = {$row.device_key_label}
expansion_module.1.key.{$row.device_key_id}.xml_phonebook =
{/if}
{/foreach}
##########################################################################################
## Expansion Module 2 ##
##########################################################################################
#Expansion module 2 key 1
#expansion_module.2.key.1.type = {$key_type_1}
#expansion_module.2.key.1.line = {$key_id_1}
#expansion_module.2.key.1.value = {$key_value_1}
#expansion_module.2.key.1.pickup_value =
#expansion_module.2.key.1.label = {$key_label_1}
#expansion_module.2.key.1.xml_phonebook =
#expansion_module.2.key.1.type = 37
#expansion_module.2.key.1.label = {$key_label_1}